Brane-world creation and black holes

An inflating brane world can be created from ``nothing'' together with its anti-de Sitter (AdS) bulk. The resulting space-time has compact spatial sections bounded by the brane. During inflation, the continuum of KK modes is separated from the massless zero mode by the gap m=(3/2)H, where H is the Hubble rate. We consider the analogue of the Nariai solution and argue that it describes the pair production of ``black cigars'' attached to the inflating brane. In the case when the size of the instantons is much larger than the AdS radius, the 5-dimensional action agrees with the 4-dimensional one. Hence, the 5D and 4D gravitational entropies are the same in this limit. We also consider thermal instantons with an AdS black hole in the bulk. These may be interpreted as describing the creation of a hot universe from nothing or the production of AdS black holes in the vicinity of a pre-existing inflating brane world. The Lorentzian evolution of the brane world after creation is briefly discussed. An additional ``integration constant'' in the Friedmann equation-accompanying a term which dilutes like radiation-describes the tidal force in the fifth direction and arises from the mass of a spherical object inside the bulk. In general, this could be a 5-dimensional black hole or a ``parallel'' brane world of negative tension concentrical with our brane-world. In the case of thermal solutions, and in the spirit of the AdS/CFT correspondence, one may attribute the additional term to thermal radiation in the boundary theory. Then, for temperatures well below the AdS scale, the entropy of this radiation agrees with the entropy of the black hole in the AdS bulk.

Creation and Validation of Chronojump-Boscosystem: A Free Tool to Measure Vertical Jumps

Measuring the height of the vertical jump is an indicator of the strength and power of the lower body. The technological tools available to measure the vertical jump are black boxes and are not open to third-party verification or adaptation. We propose the creation of a measurement system called Chronojump-Boscosystem, consisting of open hardware and free software. Methods: A microcontroller was created and validated using a square wave generator and an oscilloscope. Two types of contact platforms were developed using different materials. These platforms were validated by the minimum pressure required for activation at different points by a strain gauge, together with the on/off time of our platforms in respect of the Ergojump-Boscosystem platform by a sample of 8 subjects performing submaximal jumps with one foot on each platform. Agile methodologies were used to develop and validate the software. Results: All the tools fall under the free software / open hardware guidelines and are, in that sense, free. The microcontroller margin of error is 0.1%. The validity of the fiberglass platform is 0.95 (ICC). The management software contains nearly 113.000 lines of code and is available in 7 languages.

Supporting knowledge creation and sharing in the early phases of the strategic innovation process

The driving forces of technology and globalization continuously transform the business landscape in a way which undermines the existing strategies and innovations of organizations. The challenge for organizations is to establish such conditions where they are able to create new knowledge for innovative business ideas in interaction between other organizations and individuals. Innovation processes continuously need new external stimulations and seek new ideas, new information and knowledge locating more and more outside traditional organizational boundaries. In several studies, the early phases of the innovation process have been considered as the most critical ones. During these phases, the innovation process can emerge or conclude. External knowledge acquirement and utilization are noticed to be important at this stage of the innovation process giving information about the development of future markets and needs for new innovative businessideas. To make it possible, new methods and approaches to manage proactive knowledge creation and sharing activities are needed. In this study, knowledge creation and sharing in the early phases of the innovation process has been studied, and the understanding of knowledge management in the innovation process in an open and collaborative context advanced. Furthermore, the innovation management methods in this study are combined in a novel way to establish an open innovation process and tested in real-life cases. For these purposes two complementary and sequentially applied group work methods - the heuristic scenario method and the idea generation process - are examined by focusing the research on the support of the open knowledge creation and sharing process. The research objective of this thesis concerns two doctrines: the innovation management including the knowledge management, and the futures research concerning the scenario paradigm. This thesis also applies the group decision support system (GDSS) in the idea generation process to utilize the converged knowledge during the scenario process.

Value creation and capital market valuation in the forest product industry

Tämä työ tähtää löytämään mahdollisia poikkeamia metsäteollisuusyritysten markkina-arvoissa ja tunnistaa tekijöitä jotka ovat vaikuttaneet pääomamarkkinoiden odotuksiin yritysten tulevaisuuden suorituskyvystä sekä yrityksen markkina-arvoon. Tämän työn päätavoitteena on kehittää diskontattuihin kassavirtoihin perustuva arvonmääritysmalli jolla mitataan metsäteollisuusyritysten tosiasiallista arvoa yritysten suorituskyvyn ja arvoajureiden perusteella. Lisäksi tavoitteena on löytää selittäviä tekijöitä havaituille eroille yritysten tosiasiallisesten arvojen ja markkinaperusteisten arvojen välisillä. Teoreettisessa osassa esitellään rahoitusteorian pääpiirteet arvonmäärityksen kannalta, aikasempia tutkimuksia sekä metsäteollisuuden toimialakohtaisia tekijöitä. Empiirisessä osassa kehittetään diskontattuihin kassavirtoihin perustuvaa arvonmääritymalli. Otos koostuu 32 suurimmasta Pohjoismaisesta ja Pohjoisamerikkalaisesta metsäteollisuusyrityksestä vuonna 2000. Tutkimuksen aikavälien 1991 -2000. Tulokset tukevat aikaisempia tutkimuksia jonka mukaan kasvuinvestoinnit eivät luo positiivisia odotuksia yrityksen tulevaisuuden kassavirroista. Tarkemmat löydöt ovat, että arvon luominen tutkimusajanjakson aikana ei vaikuttanut yhtä merkittävästi pääomamarkkinoiden odotuksiin yrityksen tulevaisuuden suorituskyvystä kuin mitatut tosiasialliset arvot. Tulokset viittaavat siihen, että metsäteollisuusyritysten markkina- arvot olivat keskimäärin riippuvaisempia itse yrityksestä, kuin sen toiminnasta.

A Legislator under Surveillance: The Creation and Implementation of Swiss Banking Legislation 1910-1934

This paper analyses how banking regulation was introduced in Switzerland - one of the world's most prominent financial centres - which remained in place until the beginning of the twenty-first century. It shows that the law adopted on 8 November 1934 is a perfect example of capture of the regulator by the regulated. Essentially a political response in the context of the economic crisis of the 1930s, it largely reflected the interests of banking circles by limiting the intervention of the State as much as possible. The introduction of the new legislation was facilitated by the temporary weakness of Swiss banking circles, as they depended on the State to delay or prevent the collapse of many major credit institutions. They did not manage to derail the law as they had two decades earlier when they scuppered the federal bill on banks drawn up between 1914 and 1916. But this time they were better organized and more united, and intervened all the more effectively in the legislative process itself. The 1934 law is thus distinctive in that it made no structural changes to the architecture of the financial centre but merely codified its practices through flexible legislation meant to reassure the public. The law was aimed less at controlling banking activity than at keeping - thanks to skilfully calibrated political concessions - the State from having to intervene more directly in the internal management of banks or in the fixing of interest rates and the export of capital.

Exploring the path through which career adaptability increases job satisfaction and lowers work stress : the role of affect

The construct of career adaptability, or the ability to successfully manage one's career development and challenges, predicts several important outcomes; however, little is known about the mechanisms contributing to its positive effects. The present study investigated the impact of career adaptability on job satisfaction and work stress, as mediated by individuals' affective states. Using a representative sample of 1671 individuals employed in Switzerland we hypothesized that, over time, career adaptability amplifies job satisfaction and attenuates work stress, through higher positive affect and lower negative affect, respectively. The data resulted from the first three waves of a longitudinal project on professional paths conducted in Switzerland. For each wave, participants completed a survey. Results of the 3-wave cross-lagged longitudinal model show that employees with higher career adaptability at Time 1 indeed experienced at Time 3 higher job satisfaction and lower work stress than those with lower career adaptability. The effect of career adaptability on job satisfaction and work stress was accounted for by negative affect: Individuals higher on career adaptability experienced less negative affect, which led to lower levels of stress and higher levels of job satisfaction, beyond previous levels of job satisfaction and work stress. Overall results support the conception of career adaptability as a self-regulatory resource that may promote a virtuous cycle in which individuals' evaluations of their resources to cope with the environment (i.e., career adaptability) shape their affective states, which in turn influence the evaluations of their job.

Knowledge creation and transfer in an iterative project environment

This Master’s Thesis examines knowledge creation and transfer processes in an iterative project environment. The aim is to understand how knowledge is created and transferred during an actual iterative implementation project which takes place in International Business Machines (IBM). The second aim is to create and develop new working methods that support more effective knowledge creation and transfer for future iterative implementation projects. The research methodology in this thesis is qualitative. Using focus group interviews as a research method provides qualitative information and introduces the experiences of the individuals participating in the project. This study found that the following factors affect knowledge creation and transfer in an iterative, multinational, and multi-organizational implementation project: shared vision and common goal, trust, open communication, social capital, and network density. All of these received both theoretical and empirical support. As for future projects, strengthening these factors was found to be the key for more effective knowledge creation and transfer.

Methods of genetic diversity creation and functional display for directed evolution experiments

Protein engineering aims to improve the properties of enzymes and affinity reagents by genetic changes. Typical engineered properties are affinity, specificity, stability, expression, and solubility. Because proteins are complex biomolecules, the effects of specific genetic changes are seldom predictable. Consequently, a popular strategy in protein engineering is to create a library of genetic variants of the target molecule, and render the population in a selection process to sort the variants by the desired property. This technique, called directed evolution, is a central tool for trimming protein-based products used in a wide range of applications from laundry detergents to anti-cancer drugs. New methods are continuously needed to generate larger gene repertoires and compatible selection platforms to shorten the development timeline for new biochemicals. In the first study of this thesis, primer extension mutagenesis was revisited to establish higher quality gene variant libraries in Escherichia coli cells. In the second study, recombination was explored as a method to expand the number of screenable enzyme variants. A selection platform was developed to improve antigen binding fragment (Fab) display on filamentous phages in the third article and, in the fourth study, novel design concepts were tested by two differentially randomized recombinant antibody libraries. Finally, in the last study, the performance of the same antibody repertoire was compared in phage display selections as a genetic fusion to different phage capsid proteins and in different antibody formats, Fab vs. single chain variable fragment (ScFv), in order to find out the most suitable display platform for the library at hand. As a result of the studies, a novel gene library construction method, termed selective rolling circle amplification (sRCA), was developed. The method increases mutagenesis frequency close to 100% in the final library and the number of transformants over 100-fold compared to traditional primer extension mutagenesis. In the second study, Cre/loxP recombination was found to be an appropriate tool to resolve the DNA concatemer resulting from error-prone RCA (epRCA) mutagenesis into monomeric circular DNA units for higher efficiency transformation into E. coli. Library selections against antigens of various size in the fourth study demonstrated that diversity placed closer to the antigen binding site of antibodies supports generation of antibodies against haptens and peptides, whereas diversity at more peripheral locations is better suited for targeting proteins. The conclusion from a comparison of the display formats was that truncated capsid protein three (p3Δ) of filamentous phage was superior to the full-length p3 and protein nine (p9) in obtaining a high number of uniquely specific clones. Especially for digoxigenin, a difficult hapten target, the antibody repertoire as ScFv-p3Δ provided the clones with the highest affinity for binding. This thesis on the construction, design, and selection of gene variant libraries contributes to the practical know-how in directed evolution and contains useful information for scientists in the field to support their undertakings.

User-generated experiences: how automated platforms for content creation and sharing has transformed information access

Esitys KDK-käytettävyystyöryhmän järjestämässä seminaarissa: Miten käyttäjien toiveet haastavat metatietokäytäntöjämme? / How users' expectations challenge our metadata practices? 30.9.2014.

Corporate Entrepreneurship in Healthcare Organizations: An explorative study of employees’ corporate entrepreneurial behavior, job satisfaction and turnover intention

The Finnish healthcare industry is currently facing significant challenges due to economic crises, aging population and major structural reforms, which have resulted in decreased job satisfaction and increased levels of turnover. This proposes that healthcare organizations need to come up with new, creative means to tackle these issues. Several researchers have argued that corporate entrepreneurship may be the necessary means to achieve this. As previous research has mainly focused on examining this concept from organizational perspective, this study looks at how it occurs on the level of individual employees. The purpose of this study is to examine how corporate entrepreneurship is manifested in individual behavior, and how this type of behavior is associated with the individual’s job satisfaction and turnover intention. Additionally, this study will examine the differences in corporate entrepreneurial behavior between private and public sector organizations, as previous research suggests that these two may be characterized differently. Data was collected with the help of a literature review as well as a survey study, which was sent out to a number of employees of four different healthcare organizations, out of which three were public and one was a private sector organization. Six distinct behavioral characteristics were recognized in previous research, which make up the measure for corporate entrepreneurial behavior. Principal components were formed from the different areas of the survey (corporate entrepreneurial behavior, job satisfaction, turnover intention), after which the association of these components were examined with linear regression analysis, which proved that corporate entrepreneurial behavior is positively correlated with both job satisfaction and intention to leave the organization. Differences between sectors were analyzed with analysis of variance and cross tabulation analysis, but neither of these suggested that any significant differences would occur. These results suggest that employees who behave entrepreneurially tend to be more satisfied with their jobs, but also consider leaving their current organizations more often than others. This may be due to the fact that healthcare organizations are not fertile for entrepreneurial behavior, which will drive entrepreneurial individuals looking for employers who may be more supportive of this type of behavior. With growing levels of dissatisfaction as well as little room for entrepreneurial behavior, the studied organizations may actually be in the process of losing those employees who have the ability and desire to behave in such manner, and who could very well be those who will eventually come up with solutions for the major challenges that these organizations are facing.