A conceptual framework for designing pharmaceutical reverse logistics networks in China

Over latest decade, Reverse Logistics (RL) has gained more and more attention from both industry and academia. In the past, most research on RL has been focused on automobile, electronic waste, computer, paper, package and package material. There is very little research and practice on drug recycling. Nevertheless, it is vital important to properly dispose expired drug because of hazardous contain which may harm to people and environment. In China, public awareness of the harmfulness of expired drugs is still very low and very few efforts have been made to recycle drugs. Therefore, this research aims to build up a conceptual framework to indentify factors of influencing drug recycling in China, from scratch borrowing from existing literature and industry practices in other recycling areas. This framework helps in designing reverse logistic (RL) network and also can provide a useful reference tool for policymakers at the local and national level. Furthermore, a primary research is planed to validate the framework and RL network.

Injection moulding process optimization for microstructured parts production

Ao longo das últimas décadas, a micromoldação (u-moldação) por injeção de termoplásticos ganhou um lugar de destaque no mercado de equipamentos eletrónicos e de uma ampla gama de componentes mecânicos. No entanto, quando o tamanho do componente diminui, os pressupostos geralmente aceites na moldação por injeção convencional deixam de ser válidos para descrever o comportamento reológico e termomecânico do polímero na microimpressão. Por isso, a compreensão do comportamento dinâmico do polímero à escala micro bem como da sua caraterização, análise e previsão das propriedades mecânicas exige uma investigação mais alargada. O objetivo principal deste programa doutoral passa por uma melhor compreensão do fenómeno físico intrínseco ao processo da μ-moldação por injeção. Para cumprir com o objetivo estabelecido, foi efetuado um estudo paramétrico do processo de μ-moldação por injeção, cujos resultados foram comparados com os resultados obtidos por simulação numérica. A caracterização dinâmica mecânica das μ-peças foi efetuada com o objetivo de recolher os dados necessários para a previsão do desempenho mecânico das mesmas, a longo prazo. Finalmente, depois da calibração do modelo matemático do polímero, foram realizadas análises estruturais com o intuito de prever o desempenho mecânico das μ-peças no longo prazo. Verificou-se que o desempenho mecânico das μ-peças pode ser significativamente afetado pelas tensões residuais de origem mecânica e térmica. Estas últimas, resultantes do processo de fabrico e das condições de processamento, por isso, devem ser consideradas na previsão do desempenho mecânico e do tempo de serviço das u-moldações.

Partner selection in green supply chains using PSO - a practical approach

Partner selection is crucial to green supply chain management as the focal firm is responsible for the environmental performance of the whole supply chain. The construction of appropriate selection criteria is an essential, but often neglected pre-requisite in the partner selection process. This paper proposes a three-stage model that combines Dempster-Shafer belief acceptability theory and particle swarm optimization technique for the first time in this application. This enables optimization of both effectiveness, in its consideration of the inter-dependence of a broad range of quantitative and qualitative selection criteria, and efficiency in its use of scarce resources during the criteria construction process to be achieved simultaneously. This also enables both operational and strategic attributes can be selected at different levels of hierarchy criteria in different decision-making environments. The practical efficacy of the model is demonstrated by an application in Company ABC, a large Chinese electronic equipment and instrument manufacturer.

Otimização de consumo energético de equipamento de grande potência

Um dos princípios da Gestão é: “If you cannot measure it, you cannot improve it.” In The Economist – 26.Dez.2008, idea of 19th century English physicist Lord Kelvin. Embora seja uma afirmação aplicável à gestão económica, também pode ser utilizada no domínio da gestão da energia. Este trabalho surge da necessidade sentida pela empresa Continental - Industria Têxtil do Ave, S.A. em efetuar uma atualização dos seus standards de produção, minimizando os seus consumos de eletricidade e gás natural. Foi necessário efetuar o levantamento dos consumos em diversas máquinas e equipamentos industriais, caracterizando e analisando os consumos ao longo de todo o processo produtivo. Para o tratamento de dados recolhidos foi desenvolvida uma folha de cálculo em MS Office ExcelTM com metodologia adequada ao equipamento em análise, que dará apoio ao decisor para a identificação dos aspetos que melhorem o processo produtivo e garantam uma elevada eficiência energética. Porém, não se enquadra no âmbito do Plano Nacional de Racionalização de Energia, sendo uma “auditoria energética” ao processo produtivo. Recentemente, a empresa, tem vindo a utilizar equipamentos eletrónicos que permitem otimizar o funcionamento mecânico dos equipamentos e das potências instaladas dos transformadores, na tentativa de racionalizar o consumo da energia elétrica. Outros equipamentos como, conversores de frequência para controlo de motores, balastros eletrónicos que substituem os convencionais balastros ferromagnéticos das lâmpadas de descarga fluorescente, têm sido incluídos ao nível das instalações elétricas, sendo gradualmente substituída a eletromecânica pela eletrónica. Este tipo de soluções vem deteriorar as formas de onda da corrente e da tensão do sistema pela introdução de distorções harmónicas. Faz ainda parte deste trabalho, um estudo de uma solução que melhore, simultaneamente o fator de potência e reduza as harmónicas presentes num posto de transformação localizado no seio da fábrica. Esta solução, permite melhorar a qualidade da energia elétrica e as condições de continuidade de serviço, garantindo melhores condições de exploração e incrementando a produtividade da empresa.

Étude exploratoire de la phase d’usage des produits électroniques en vue de minimiser les impacts environnementaux : le cas du téléviseur

À cause de leur impact environnemental élevé, les déchets d’équipements électriques et électroniques (DEEE) sont un problème majeur pour les pays développés. La consommation importante de produits électroniques, dont la durée d’utilisation est de plus en plus courte, a entrainé une production croissante de DEEE. C’est dans ce contexte que l’Union européenne a instauré en 2003 la responsabilité élargie des producteurs (REP). Cet outil de politique environnementale a rendu légalement responsables les fabricants de la mise en oeuvre et du financement d’un programme d’intendance des DEEE. Alors que la REP vise principalement le traitement écologique des DEEE, cet instrument ne permet pas de réduire les quantités considérables qui sont produites par les consommateurs. Cette situation est d’autant plus inquiétante que les gains environnementaux obtenus, grâce à l’implantation de la REP, ont été annulés au regard de l’augmentation continue de la consommation de biens électroniques à l’échelle mondiale. En réponse à cette problématique, la présente thèse porte sur les pratiques de l’usager au cours de la phase de consommation des appareils électroniques (aussi appelée phase d’usage). Cette étape du cycle de vie regroupe l’achat, l’utilisation, la réparation et la mise au rebut des biens. Une approche qualitative de type exploratoire faisant appel à l’étude de cas a été utilisée. Le téléviseur, retenu comme cas d’étude, illustre des enjeux partagés par plusieurs équipements électroniques, tels que : la fréquente mise sur le marché de nouveaux modèles, le bas prix d’acquisition comparé au coût de la réparation et l’influence de la mode sur les choix effectués par le consommateur. Ces facteurs facilitent le remplacement des biens et, par conséquent, pourraient entrainer leur fin de vie prématurée qui se matérialise à travers différentes formes d’obsolescence. Dans le cadre de cette étude de cas, une trentaine d’entrevues semi-dirigées a été réalisée avec des usagers et réparateurs de produits électroniques en vue de documenter les différentes sous-étapes de la phase d’usage d’un téléviseur. Sur la base des informations recueillies, l’objectif de cette thèse est de formuler des recommandations, à destination des autorités politiques, qui pourront permettre une minimisation des impacts environnementaux liés à la phase d’usage des appareils électroniques. Les résultats ont permis de mettre en évidence, via le rôle et le statut singulier occupé par le téléviseur dans les foyers, les comportements de l’usager contribuant à augmenter l’empreinte écologique associée à la phase d’usage. L’acquisition de nombreux biens électroniques et non électroniques suite à l’achat du téléviseur, ses multiples fonctionnalités le rapprochant de celles de l’ordinateur et des tablettes, ainsi que la fin de vie prématurée de produits fonctionnels, mais obsolètes d’un point de vue technologique, font partie des résultats de cette recherche. En lien avec ces constats, cette étude propose des instruments de politique environnementale, dont l’affichage de la durée de vie des équipements électroniques, destinés à aider le consommateur à réaliser des choix plus éclairés au moment de l’achat. D’autres orientations, telles que la possibilité d’évoluer vers une réglementation horizontale, c’est-à-dire un cadre législatif qui ne se basera plus sur le produit individuel, mais sur l’ensemble des appareils ayant des fonctionnalités similaires, sont exposées. Par ailleurs, cette recherche explore certains leviers pouvant minimiser le phénomène de fin de vie prématurée des appareils électroniques, tels que l’envoi de biens obsolètes et fonctionnels des pays développés vers ceux en développement pour permettre leur réutilisation et la tendance du Do-It- Yourself dans la réparation des produits électroniques.

Waste Water Treatment Using Low Cost Natural Adsorbents

Heavy metals are major toxic pollutants with severe health effects on humans. They are released into the environment from a variety of industrial activities. Cadmium, lead, zinc, chromium and copper are the most toxic metals of widespread use in industries such as tanning, electroplating, electronic equipment manufacturing and chemical processing plants. Heavy metals contribute to a variety of adverse health environmental effects due to their acute and chronic exposure through air, water and food chain. Conventional treatment methods of metal removal are often limited by their cost and ineffectiveness at low concentrations. Adsorption, the use of inactivated biomass as adsorbents offers an attractive potential alternative to their conventional methods. Mango peel and Alisma plantago aquatica are naturally occurring and abundant biomass can offer an economical solution for metal removal.The Cd(II), Pb(II), Zn(II), Cr(III) and Cu(II) adsorption by milled adsorbents of mango peel and Alisma plantago aquatica were evaluated in batches.

Studies on laser induced optogalvanic effect in certain gas discharges

Electrical gas discharges have been the subject of numerous investigations from the last century due to their growing interest in technological and fundamental applications. Absorption of electromagnetic radiation by a gas discharge result into a change in electrical impedance due to a significant perturbations in the steady state population of excited levels and the degree of ionization. This change in impedance produced by resonant absorption of radiation is known as optogalvanic COG) effect. where as that is produced by injecting electrons in to the discharge by photoelectric emission is usually known as photoemission optogalvanic (FOG) effect. With the development of lasers and sophisticated electronic equipment. these effects have established their importance in analytical and spectroscopic measurements. The present thesis deals with the work carried out by the author in the field optogalvanic effect during the past few years at the Department of Physics in Cochin University of Science| and "Fechnology. The results and the observation are summarized in nine chapters and the references to the literature is made at the end of each chapter

Evaluación de la gestión de residuos derivados del proceso de impresión en Datapoint de Colombia S.A.S, y propuesta de mejora

Este trabajo se centra en el análisis de las actividades desarrolladas en torno a los servicios de procesos de impresión que ofrece la organización DATAPOINT de Colombia SAS para identificar los puntos críticos en la gestión de los residuos de impresión y las decisiones tomadas por parte de los involucrados durante todo el proceso (proveedores, clientes y la empresa), con el fin de revisar medidas y estrategias que permitan fortalecer la gestión integral de residuos de impresión a partir de una revisión y comparación de las mejores prácticas planteadas por los actores del sector. También se efectuaron recomendaciones con acciones de mejora que se podrían desarrollar con el fin de mitigar el impacto ambiental generado por estos residuos. Con la finalidad de cumplir con lo planteado se realizó inicialmente un estudio sobre la organización, sus clientes y proveedores para entender de manera integral la cadena de valor en torno a los tóner y su gestión inversa, (explicar) al igual que el entorno normativo tanto de manera nacional como internacional. Posteriormente, se identificaron los puntos de mejora comparando lo planteado por el proveedor versus lo ejecutado por los involucrados en el proceso, labor se realizó en campo con los clientes para entender la situación actual, sus necesidades y en que basan la toma de decisiones relacionada con el manejo de los residuos de impresión. Finalmente se listaran una serie de acciones de mejora y recomendaciones las cuales pueden ser incorporadas a los procesos críticos de DATAPOINT.

Glicemia neonatal : comparação dos resultados da determinação da glicemia em recém-nascidos através de amostra sérica venosa e amostra de sangue capilar

Para a realização deste estudo, partiu-se da definição que hipoglicemia corresponde a uma taxa de glicose menor ou igual a 40mg/dl e hiperglicemia a uma concentração sangüínea de glicose maior que 120mg/dl. Foi realizado um estudo transversal, selecionando RNs com patologias potencialmente modificadoras da concentração de glicose e que deveriam ter suas glicemias monitorizadas e RNs com quadros clínicos os mais variados indicando a necessidade de coleta de sangue para sua assistência. A amostra de escolha para as dosagens de glicose é a venosa, porém há uma série de inconvenientes para se realizar essa determinação, uma vez que há necessidade de punção venosa, o que exige habilidade na execução devido ao diâmetro dos vasos e da própria fragilidade dos RNs, principalmente os prematuros, os quais constituem o grupo de maior risco para hipoglicemia. Outro problema que se observa é a demora em se obter os resultados, devido à estrutura da maioria dos nossos hospitais. Como existe no mercado um aparelho manual eletrônico que utiliza tiras-teste eletroquímicas capaz de dosar a glicemia capilar em 20 segundos, elaborou-se este estudo 19 trabalho para verificar se as determinações da glicemia em sangue capilar coincidiam com a realizada em sangue venoso (padrão-ouro), contribuindo assim para que o diagnóstico e o tratamento possam ser efetivados o mais precocemente possível. Foram estudados 177 exames, encontrando-se o seguinte: como desempenho do teste Precision Plus®, usando o ponto de corte tradicional para hipoglicemia (≤40) e (n=28), sensibilidade de 90,3 (IC 95%: 73,1 a 97,5) e especificidade de 88,4 (IC 95%: 81,7 a 92,9); como desempenho do teste Precision Plus®, usando o ponto de corte tradicional para hiperglicemia (≥120) e (n=17), sensibilidade 77,3 (IC 95%: 54,2 a 91,3) e especificidade 93,5 (IC 95%:88,1 a 96,7). Modificando o corte tradicional para taxas de 50 mg/dl e 100 mg/dl, respectivamente, hipo e hiperglicemia encontrou-se como desempenho do teste Precision Plus® para hipoglicemia (≤ 50), sensibilidade de 96,8 e especificidade de 82,9; como desempenho do teste Precision Plus® para hiperglicemia (≥100), sensibilidade de 95,5 e especificidade de 87,7. O desempenho do aparelho Precision Plus® no teste é adequado para realizar rastreamento de alterações glicêmicas nas populações de risco em UTIs, apesar das oscilações. Este método não deverá ser o indicado para tomadas de condutas terapêuticas. O método bioquímico deverá ser sempre utilizado para a confirmação da glicemia quando esta for realizada por métodos mais simples.

Adaptações do sistema de informações gerenciais para atender necessidades de empresas envolvidas com a implantação do pensamento enxuto: um estudo de caso

The management system based on lean thinking has led to significant changes in the companies that have decided to adopt it. Frequently, those changes do not create a sustainable position coherent with the good results that are obtained. Many are the causes being discussed and analyzed, not only in academia, but also by lean manufacturing institutes and companies. The existing practices related to the managerial information system and the implementation, development, and maintenance of the lean journey may be some of such causes. This dissertation emphasizes whether the changes generated by this type of management are being followed by the managerial information system. The development of such system was in many cases based on mass production, whose principles go against lean manufacturing concepts. Thus, the objective of this dissertation is to verify whether the traditional managerial information system can meet the needs of the companies that adopt lean manufacturing principles. Through a case study based on qualitative and exploratory research in an electronic equipment assembling company, the stage of the implementation of lean thinking concepts at the time of the field research was analyzed, as well as whether the metrics, financial and non financial indicators were suitable for lean principles. The aim of such study was to empirically verify if the criticism found in the existing literature was pertinent or not. The data collected through the analysis of the documentation, the interviews with managers and in loco observation was treated through the content analysis method. The main conclusion of the research is that, although the company in question is investing in training and applying lean principles in its production line and in some administrative activities, the current managerial information system does not demonstrate the specific results obtained with lean principles. However, how changes to the managerial information system will be implemented is yet to be determined. Currently, metrics and indicators aligned with lean management are being added to the managerial reports. As more lean tools are employed, mainly with the consolidation of more value streams, the company has already diagnosed the need for new indicators. The main office has started a diagnosis of measurement and control systems in a product line in one of its affiliates with the goal of studying the possibility of applying the so called lean accounting in the future.

Obtenção de uma porcelana dielétrica a partir de matérias-primas do Rio Grande do Norte

The dielectric porcelain is usually obtained by mixing various raw materials proportions and is used in the production of electronic equipment for various applications, from capacitors of high and low Power to insulators for low, medium, high and extra high voltage, which are used in distribution lines and transmission of electricity.This work was directed to the s tudy of technological properties of technic porcelain, made from raw materials extracted from pegmatites found in the regions of Seridó and the Alto Oeste of Rio Grande do Norte, which are made of kaolin, quartz and feldspar, abundant and high quality in these regions. The technic ceramics were obtained by mixing in appropriate levels, kaolin, feldspar, quartz and clay, the last item from a pottery in the city of Sao Gonçalo do Amarante, Rio Grande do Norte. During the development the following characterizations correlated to raw materials were made: laser particle sizing, x-ray diffraction, DTA and TG. The compositions studied were formed by uniaxial pressing at a pressure of 50 MPa and sintered at temperatures ranging from 1150 to 1350ºC and levels (times) of sintering between 30, 60, 90 and 120 minutes. The characterization of the samples were taken from the analysis of weight loss, linear shrinkage, porosity, stoneware curve, bulk density, flexural strength of three points, SEM and X-ray diffraction, TMA, Dielectric and cross Resistivity. The studied materials can be employed in producing the objects used in electrical engineering such as: insulators for low, medium and high-voltage electrical systems, command devices, bushing insulation for transformers, power capacitors, spark plugs, receptacles for fluorescent and incandescent light bulbs and others

Fatores de sucesso no desenvolvimento de novos produtos em pequenas empresas: um estudo de caso em um fabricante de equipamentos para gás natural veicular

This study presents itself as a contribution to the solidification of the Natural Gas industry, within the scope of the development of new products. The goal of this paper is to analyze the factors that lead to the success of new products through the evaluation of the activities done during the process of development of these products in the Natural Gas sector. To achieve this goal a case study was done in a small company of this segment. At first, as a basis for the study, a bibliographical research was done with books, theses, dissertations, monographies, publications in national and international periodicals, congress annals and publications in the internet related to the subject. Afterwards, a case study was done, aiming at the acquisition of further knowledge about the real process of development of products in a small company of the Natural Gas sector, allowing for the performance of the evaluation. The case study was done at Gas Project and Systems do Brasil, a company that works with the development of electronic equipment to the conversion of car engines to natural gas, through direct observations and interviews with the person responsible for the development and management of products. Through the evaluation of the process it was observed that the activities related to it are done in an informal way and some activities are considered unnecessary for their success. The results also suggest an emphasis in the technological activities, something that was not observed in the activities related to the market. The instruments used in this evaluation prove to be efficient to evaluate the process of development of new products in other companies, including those of different areas. Taking into account the relevance of the studied theme to the strengthening of the Natural Gas industry, it is necessary to do further complementary studies

Associação deagentes patogênicos isolados emanálise microbiológica da água, coma presença de mastite clínica ou subclínica, em vacas de propriedades leiteiras da região de Cerqueira César - SP

Objetivou-se, neste trabalho, pesquisar a relação entre os microrganismos patogênicos isolados e identificados em água utilizada na ordenha, com o isolamento e identificação dos mesmos em amostras de leite, de quartos mamários apresentando mastite clínica ou subclínica nas mesmas propriedades. Foram utilizadas 16 propriedades rurais leiteiras, escolhidas aleatoriamente, na região de Cerqueira César - SP, que utilizavam ordenha mecânica. A água utilizada na ordenha foi classificada em relação à presença de coliformes totais e fecais, como dentro dos padrões ou fora dos padrões de potabilidade humana. Nos resultados obtidos, 94% das amostras foram classificadas como fora dos padrões em relação a coliformes totais e fecais. Os microrganismos identificados foram: Escherichia coli (51%), Enterobacter spp. (25%), Enterobacter cloacae (8%) Edwardsiella tarda (8%) e Klebsiella oxytoca (8%). em relação ao leite, foram analisadas 373 amostras provenientes de vacas em lactação, com mastite clínica (n=19; 5%) e subclínica (n=354; 95%). Os animais com mastite subclínica foram identificados pela contagem de células somáticas (CCS), utilizando-se o aparelho eletrônico (Somacount 300, Bentley), onde a média observada foi de 1.631 x 10³ células/mL. Os principais microrganismos identificados foram: Staphylococcus aureus (30%), Corynebacterium bovis (23%) e Staphylococcus spp. (15%). Conforme os dados obtidos, os agentes coliformes encontrados na água, utilizada na ordenha, não estavam presentes nas análises das amostras de leite dos quartos mamários com mastite clínica ou subclínica das respectivas propriedades, demonstrando não haver associação entre a qualidade da água e a ocorrência de mastite.

Numerical and experimental analysis of natural convection in a cavity with flush mounted heat sources on a side wall

This work considers a problem of interest in several technological applications such as the thermal control of electronic equipment. It is also important to study the heat transfer performance of these components under off-normal conditions, such as during failure of cooling fans. The effect of natural convection on the flow and heat transfer in a cavity with two flush mounted heat sources on the left vertical wall, simulating electronic components, is studied numerically and experimentally. The influence of the power distribution, spacing between the heat sources and cavity aspect ratio have been investigated. An analysis of the average Nusselt number of the two heat sources was performed to investigate the behavior of the heat transfer coefficients. The results obtained numerically and experimentally, after an error analysis, showed a good agreement.

Optimized allocation of sectionalizing switches and control and protection devices for reliability indices improvement in distribution systems

Reliability of power supply is related, among other factors, to the control and protection devices allocation in feeders of distribution systems. In this way, optimized allocation of sectionalizing switches and protection devices in strategic points of distribution circuits, improves the quality of power supply and the system reliability indices. In this work, it is presented a mixed integer non-linear programming (MINLP) model, with real and binary variables, for the sectionalizing switches and protection devices allocation problem, in strategic sectors, aimed at improving reliability indices, increasing the utilities billing and fulfilling exigencies of regulatory agencies for the power supply. Optimized allocation of protection devices and switches for restoration, allows that those faulted sectors of the system can be isolated and repaired, re-managing loads of the analyzed feeder into the set of neighbor feeders. Proposed solution technique is a Genetic Algorithm (GA) developed exploiting the physical characteristics of the problem. Results obtained through simulations for a real-life circuit, are presented. © 2004 IEEE.