Expression of betacatenin in carcinoma in pleomorphic adenoma, pleomorphic adenoma and normal salivary gland: an immunohistochemical study

OBJECTIVES: Pleomorphic adenomas are the most frequent type of epithelial salivary gland neoplasms, and their malignant counterpart, the carcinoma in pleomorphic adenomas, is much less common. Beta-catenin is a cell adhesion molecule associated with the invasion and metastasis of carcinomas of the head and neck, esophagus. The objective of this study was to detect the expression of beta-catenin in pleomorphic adenomas, carcinomas in pleomorphic adenomas and normal salivary glands to discuss its role in the development of these two lesions. STUDY DESIGN: The expression of beta-catenin (BD Transduction Laboratories) was analyzed by immunohistochemistry in formalin-fixed, paraffin embedded specimens by the avidin-biotin-peroxidase complex method in 16 pleomorphic adenomas (12 from minor salivary glands), 3 carcinomas in pleomorphic adenomas (all from palate) and 10 normal salivary glands as control group (5 from major and 5 from minor salivary glands). RESULTS: All cases of glands, adenomas and carcinomas in pleomorphic adenomas have membranous and cytoplasmic immunostaining. Nuclear beta-catenin immunostaining was not observed. The antibody presented a fine granular arrangement in the cytoplasm and cellular membrane of duct and acinic cells. Higher beta-catenin index rates were seen mainly in salivary gland ducts and in ductal structures in the adenomas and carcinomas in pleomorphic adenomas. There was protein loss in pleomorphic adenomas and cytoplasmic accumulation in carcinoma in pleomorphic adenomas. CONCLUSIONS: The present study showed participation of the loss of beta-catenin adhesion molecule in the development of pleomorphic adenoma, and that the cytoplasmic accumulation of the molecule takes part in the malignant transformation of the pleomorphic adenoma into carcinoma in pleomorphic adenoma.

Comparative study of the behavior of p53 immunoexpression in smoking associated lesions: Reinke's edema and laryngeal carcinoma

Objective: To assess the behavior of the immunoexpression of protein p53 in Reinke's edema and laryngeal squamous cell carcinoma. Study design: retrospective. Methods: we recovered the histological paraffin blocks of patients who were subjected to Reinke's edema and laryngeal squamous cell carcinoma surgery in 2000-2011. The paraffin blocks were cut into 3-μm sections; the specimens were prepared in silanized slides (one slide for each paraffin block) and subjected to immunohistochemical reaction according to the Avidin Biotin Peroxidase method. Monoclonal primary anti-p53 antibodies were used at 1:50 dilution. Slides were examined under a light microscope at different magnitudes and results were interpreted based on the degree of brown staining in the nuclei of epithelial cells and in the extent of the fragment by using a semi-quantitative score from 0 to 3. Results: 67 slides of Reinke's edema and 60 slides of laryngeal squamous cell carcinoma were included. Scores 2 and 3 for staining of the nuclei of epithelial cells were recorded for 46 slides of Reinke's edema (68.65%) and for 57 slides of laryngeal squamous cell carcinoma (95%). As to the extent of the fragment, scores 2 and 3 were recorded for 74% slides of Reinke's edema and for 95% slides of carcinomas. Conclusion: the positive immunoexpression for protein p53, positive in 95% carcinomas and 74% Reinke's edemas, makes us aware of the possible preneoplastic condition of the latter lesion. Further studies are needed to identify and reveal the genetic changes that lead to these results. © 2013 Informa Healthcare USA, Inc.

Desenvolvimento e aperfeiçoamento de protocolos de conjugação de nanomarcadores luminescentes com sistemas biológicos para aplicação em imunoensaios

Pós-graduação em Química - IBILCE

Síntese e caracterização de híbridos orgânico-inorgânicos luminescentes para aplicação em ensaios biológicos

Pós-graduação em Química - IBILCE

Desenvolvimento de um biosensor amperométrico para a detecção do vírus da Hepatite C

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização isoenzimática e por anticorpos monoclonais dos agentes da leismaniose tegumentar americana (LTA) na mesorregião do Baixo Amazonas, estado do Pará, Brasil

Existe uma diversidade de espécies de Leishmania prevalentes na região Amazônica associadas à LTA configurando a etiologia múltipla da doença e, apesar do conhecimento da elevada ocorrência desta protozoose na Mesorregião do Baixo Amazonas, à oeste do Estado do Pará, quase nada era sabido sobre os agentes etiológicos da doença na referida área. Nesse sentido, o presente trabalho propôs-se a caracterizar por eletroforese de isoenzimas as amostras de Leishmania isoladas de pacientes procedentes da Mesorregião do baixo Amazonas, verificando a existência da correlação geográfica das espécies encontradas com a sua distribuição regional previamente conhecida, e ainda, verificando a presença de variação intraespecífica. A caracterização das 43 amostras de Leishmania foi feita por eletroforese em gel de amido utilizando sete sistemas enzimáticos (6PGDH, PGM, G6PD, MPI, GPI, ASAT E ALAT), comparando seus perfis eletroforéticos com os perfis das sete cepas-referência das espécies conhecidas da região. As amostras foram testadas previamente por imunofluorescência indireta com o uso de um painel com 23 anticorpos monoclonais (sistema biotina-avidina) apenas como uma triagem. A caracterização isoenzimática das amostras permitiu o seguinte resultado: 11 (25,28%) amostras de L. (V) braziliensis, 20 (46,50%) de L.(V) guyanensis, 2 (4,60%) de L.(L.) amazonensis, 4 (9,30%) de L.(V) shawi e 6 (13,95%) de L.(V) lainsoni. A eletroforese isoenzimática apresentou elevado poder discriminatório para a identificação das amostras estudadas, permitindo concluir que esta técnica representa uma importante ferramenta para a caracterização dos parasitos do gênero Leishmania. Nas cepas de L. (V) braziliensis observou-se pela primeira vez na Mesorregião do Baixo Amazonas a ocorrência de variação intraespecífica revelada pela presença de três serodemas. Nas cepas de L. (V) guyanensis observou-se a presença de duas variantes, uma que apresentou reatividade com o monoclonal B 19 (espécie-específico), porém com variação nas enzimas 6PGDH e PGM, e a Segunda, sem reatividade para este monoclonal e com perfis eletroforéticos semelhantes ao da cepa-referência L. (V) guyanensis especialmente nas enzimas 6PGDH, porém com tribandas, e na PGM, consideradas os melhores marcadores enzimáticos pelo seu elevado poder discriminatório. Dessa forma, descreveu-se pela primeira vez a ocorrência de diferentes espécies de Leishmania dermotrópicas na Mesorregião do Baixo Amazonas, as quais já tem registro na região norte do Brasil, sugerindo a transmissão simpátrica das espécies encontradas na referida área estudada.

Imunolocalização do fator de crescimento semelhante à insulina (IGF-I) e do fator de crescimento epidermal (EGF) em ovários caninos e seus efeitos sobre a maturação in vitro de oócitos: avaliação nuclear

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência do índice apoptótico e da imuno-expressão da survivina no prognóstico de pacientes com mola hidatiforme completa

Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB

Immunohistochemistry Analysis of Proteins Related with Apoptosis as Prognostic Factor in Epidermoid Carcinoma of Penis

The aim was to analyze the protein expression of apoptotic genes caspase-3, caspase-8 and bcl-2 with the immunohistochemistry technique, correlating with tumor grade (I, II and III) and with the patient survival in order to understand the basic mechanism of tumoral transformation. The immunohistochemistry reactions on 50 samples of squamous cell carcinoma were carried out with the avidin-biotin immunoperoxidase method and antigen recovery. The analyses were made using the graduation method "in crosses" (0 to 4 crosses - no stain to more than 75% of positives cells) and in categories (low, intermediate, high) of the cytoplasm immunoreactivity of the epidermoid penile carcinoma cells. It was observed a statistically significant difference when the expression of caspase-3 were compared with the grades land II of the tumor (p=0.0010) and when comparing the patient survival with the grades I and II of the tumor (p=0.0212). The protein bcl-2 was more expressed than caspase-3 and caspase-8 proteins, suggesting that the apoptotic rate in this carcinoma is low. The higher expression of the anti-apoptotic protein bcl-2 suggests a higher preservation of the tumoral cells.

Immunohistochemical expression of Rho GTPases in ameloblastomas

Rho GTPases are proteins that regulate cell cycle, shape, polarization, invasion, migration, and apoptosis, which are important characteristics of normal and neoplastic cells. Rho GTPases expression has been reported in normal tooth germ and several pathologies; however, it has not been evaluated in ameloblastomas. The aim of this study was to analyze the expression and distribution of RhoA, RhoB, Rac1, and Cdc42 Rho GTPases in solid and unicystic ameloblastomas. Three-micrometer sections from paraffin- embedded specimens were evaluated by using an avidin- biotin immunohistochemical method with antibodies against the proteins mentioned above. RhoA and RhoB staining was observed in a high number of cells (P < 0.05) and greater intensity in non-polarized ones. Rac1 was not observed, andCdc42 didnot showany statistical differences between the number of non-polarized and basal positive cells (P > 0.05). Upon comparing the studied ameloblastomas, a higher number of positive cells in the unicystic variant was observed than that in the solid one (P < 0,05). The results obtained suggest that theseGTPases could play a role in the ameloblastoma neoplastic epithelial cell phenotype determination (polarized or non-polarized), as well as in variant (solid or unicystic) and subtype (follicular or plexiform) determination. Furthermore, they could participate in solid ameloblastoma invasion mechanisms. J Oral Pathol Med (2012) 41: 400-407

Complessi metallici come “probes” luminescenti per avidina: design e sintesi di leganti bifunzionali piridintriazolo-biotina

Studi recenti sull’utilizzo di sonde organometalliche per bioconiugazione sfruttano la possibilità di interazione di queste con una proteina, l’avidina, per la sua capacità di coordinarsi selettivamente ad una particolare molecola organica, la biotina. In questa tesi viene descritta la sintesi di due leganti bi-funzionali contenenti sia un’unità capace di fungere da legante per un opportuno metallo, che un’unità di biotina in grado di legarsi all’avidina. La differenza fra i due leganti risiede nello spaziatore che collega le due unità funzionali della molecola. Una volta ottenuti i leganti progettati, sono stati sintetizzati i corrispondenti complessi di Ir (III) e Re (I). Le proprietà fotofisiche sono state misurate sia in solvente organico che in soluzione acquosa e quindi sono state effettuate titolazioni dell’avidina con soluzioni acquose a titolo noto dei complessi sintetizzati, con il fine di comprendere come le proprietà luminescenti dei complessi vengano influenzate dalla bio-coniugazione tra biotina ed avidina.

Funktionalisierte Latexpartikel

In der vorliegenden Arbeit wurden unter Verwendung neuer auf der Isophthalsäure basieren-der polymerisierbaren Tensiden carboxylfunktionalisierte Latexpartikel hergestellt, charakte-risiert und funktionalisiert. Im ersten Teil dieser Arbeit wurden 5-(10-Undecenyloxy)isophthalsäure (ISA-Vinyl), 5-(11-(4-Vinylphenoxy)undecyloxy)isophthal-säure (ISA-Sty), 5-(11-(2-Prop-1-enyl)phenoxy)undecyloxy)isophthalsäure (ISA-Pr), 5-(11-(1-Methacryloxy)undecylen)isophthalsäure (ISA-Met) und 5-(10-(3-Methylbut-3-enyl)oxy-1-oxydecylen)isophthalsäure (ISA-Bu) hergestellt. Die Surfmere wurden mit Styrol bzw. mit n-Butylacrylat copolymerisiert. ISA-Bu und ISA-Pr weisen während der Copolymerisation mit Styrol fast ideale Verläufe der Zeit/Umsatz-Kurven auf. Bei der Copolymerisation von ISA-Bu bzw. ISA-Vinyl mit n-Butylmethacrylat wurden ähnliche Ergebnisse erhalten. Die Carboxylgruppen an der Partikeloberfläche wurden mit Halogenderivaten verestert oder mit primären Aminen amidiert. Die funktionalisierten Partikel wurden mit der Polyelektrolyt-titration und konduktometrischen Titration, der IR- und UV-Spektroskopie, der Transmissi-onselektronenmikroskopie, der Fluoreszenzkorrelationsspektroskopie charakterisiert. Es konnte gezeigt werden, dass die Reaktanden kovalent an der Partikeloberfläche gebunden sind. Die Polymerpartikel wurden bei der Herstellung von Immunoassays genutzt. Die Adsorpti-onsisothermen zeigten, dass eine hohe Menge an Rinderserumalbumin an die Partikeloberflä-che physikalisch gebunden werden kann. In dieser Arbeit wurde ein einfaches Immunoassay hergestellt mit Biotin – Avidin als Modellsystem hergestellt. Die Surfmere wurden zur Stabilisierung von Miniemulsionen für die Miniemulsionspolymeri-sation genutzt. Im Laufe dieser Arbeit konnten mit dieser Methode Rylenfarbstoffe in Po-lystyrolpartikel stabilisiert werden.

Design e sintesi di nuove sonde luminescenti per il "targeting" dell'avidina

Recent studies on the use of bio-conjugating organometallic probes report on the possibility to use biotinylated-derivatives to selectively coordinate to a specific protein, avidin. In the present thesis, the synthesis of four new bifunctional ligands is described. The ligands contain both a pyridine triazolic unit able to coordinate a transition metal, and a biotin fragment able to bond avidin: the two functionalities are linked together by an appropriate aromatic linker (amide or ester). The obtained ligands were then employed to form luminescent Ir(III) complexes, that have been fully characterized also by a photophysical point of view both in organic and in aqueous solvent. Therefore, titrations of solutions of avidin with aqueous solutions of Ir(III)-complexes have been performed in order to estimate the luminescence variations of the complexes in the presence or in the absence of bio-conjugation.

Einzelmolekül-Untersuchungen zu Faltung und Zusammenbau des Lichtsammelkomplexes LHCII

Zusammenfassungrn Der Faltungsprozess des Hauptlichtsammelkomplexes des Photosystems II aus höheren Pflanzen (light harvesting complex II, LHCII) wurde bereits mehrfach untersucht, die Experimente hierzu fanden stets im Ensemble statt. Anhand der bislang veröffentlichten Faltungskinetiken des LHCII aus höheren Pflanzen lassen sich aber keine eindeutigen Aussagen bezüglich der Diversität der Faltungswege treffen. Daher sollten im Rahmen dieser Arbeit Faltungskinetiken einzelner LHCII-Moleküle während der Komplexbildung aufgenommen werden, um weitergehende Informationen zum Faltungsmechanismus zu erhalten und zur Frage, ob hier mehrere unterschiedliche Wege eingeschlagen werden.rnHierfür war zunächst die Etablierung einer Oberflächenimmobilisierung mit Glas als Trägermaterial notwendig. Nachdem Versuche, diese Immobilisierung über einen His6-tag oder über einen heterobifunktionellen Linker zu bewerkstelligen, nicht zum Erfolg geführt haben, konnte eine Immobilisierung des Biotin-markierten Proteins an Oberflächen-gebundenes Avidin erreicht werden. Die Qualität dieser Immobilisierung wurde hierbei sowohl über Bindungsversuche mit fluoreszenzfarbstoffmarkiertem Protein als auch über eine direkte Kontrolle der Oberflächenbeschaffenheit mittels Rasterkraftmikroskopie überprüft. Die für die folgenden Versuche optimale Belegungsdichte wurde im konfokalen Fluoreszenzmikroskop ermittelt. Zudem wurde sichergestellt, dass die Proteine vereinzelt auf der Oberfläche immobilisiert vorliegen.rnAuf dieser Basis wurden LHCII-Komplexe, die zuvor in vitro rekonstituiert wurden, immobilisiert und Versuche zur kontrollierten Denaturierung unternommen, um Zerfalls-kinetiken im Verfahren der internen Totalreflexionsfluoreszenzmikroskopie (total internal reflection fluorescence, TIRF) aufnehmen zu können. Hierbei traten Schwierigkeiten bezüglich der Lebensdauer der Komplexe unter Laser-Belichtung auf, da sich die Löschung der Fluoreszenz durch Zerstrahlung der Pigmente einerseits oder Dissoziation der LHCII andererseits nicht unterscheiden ließen. Auch durch verschiedene Maßnahmen zur Erhöhung der Lebensdauer konnte diese nicht in dem Maße gesteigert werden, wie es experimentell notwendig gewesen wäre.rnFür das eigentliche Hauptziel dieser Arbeit – die Aufzeichnung von Einzelmolekül-Faltungskinetiken – war die Entwicklung einer Methode zur Rekonstitution oberflächen-immobilisierter LHCII-Apoproteine notwendig. Dieses Ziel wurde mithilfe einer Detergenzmisch-Rekonstitution erreicht. Der Erfolg der Rekonstitution konnte experimentell sowohl im Fluorimeter anhand des komplexinternen Energietransfers auf einen kovalent an das Protein gebundenen Infrarot-Fluorophor als auch im TIRF-Verfahren direkt beobachtet werden. Auch hier konnte nach ca. 80 Sekunden ein Ausbleichen der Komplexe während der Belichtung durch den Anregungs-Laser beobachtet werden.rnIn Versuchen zur Beobachtung des Komplexbildungsvorganges zeigte sich, dass die Rekonstitution offenbar durch die Belichtung massiv gestört wird. Ein weiteres Problem war eine sehr starke Hintergrundfluoreszenz, ausgelöst durch die zur Rekonstitution notwendige Pigmentlösung, die trotz der TIRF-Anregung von ausschließlich oberflächengebundenem Material die Fluoreszenz der Komplexe überlagerte. Somit konnte die Rekonstitution oberflächenimmobilisierter LHCII-Proteine zwar in Vorher-Nachher-Aufnahmen gezeigt werden, der Faltungsprozess an sich konnte dagegen im Rahmen dieser Arbeit nicht aufgezeichnet werden.

Structured antibody surfaces for bio-recognition and a label-free detection of bacteria

Antibody microarrays are of great research interest because of their potential application as biosensors for high-throughput protein and pathogen screening technologies. In this active area, there is still a need for novel structures and assemblies providing insight in binding interactions such as spherical and annulus-shaped protein structures, e.g. for the utilization of curved surfaces for the enhanced protein-protein interactions and detection of antigens. Therefore, the goal of the presented work was to establish a new technique for the label-free detection of bio-molecules and bacteria on topographically structured surfaces, suitable for antibody binding.rnIn the first part of the presented thesis, the fabrication of monolayers of inverse opals with 10 μm diameter and the immobilization of antibodies on their interior surface is described. For this purpose, several established methods for the linking of antibodies to glass, including Schiff bases, EDC/S-NHS chemistry and the biotin-streptavidin affinity system, were tested. The employed methods included immunofluorescence and image analysis by phase contrast microscopy. It could be shown that these methods were not successful in terms of antibody immobilization and adjacent bacteria binding. Hence, a method based on the application of an active-ester-silane was introduced. It showed promising results but also the need for further analysis. Especially the search for alternative antibodies addressing other antigens on the exterior of bacteria will be sought-after in the future.rnAs a consequence of the ability to control antibody-functionalized surfaces, a new technique employing colloidal templating to yield large scale (~cm2) 2D arrays of antibodies against E. coli K12, eGFP and human integrin αvβ3 on a versatile useful glass surface is presented. The antibodies were swept to reside around the templating microspheres during solution drying, and physisorbed on the glass. After removing the microspheres, the formation of annuli-shaped antibody structures was observed. The preserved antibody structure and functionality is shown by binding the specific antigens and secondary antibodies. The improved detection of specific bacteria from a crude solution compared to conventional “flat” antibody surfaces and the setting up of an integrin-binding platform for targeted recognition and surface interactions of eukaryotic cells is demonstrated. The structures were investigated by atomic force, confocal and fluorescence microscopy. Operational parameters like drying time, temperature, humidity and surfactants were optimized to obtain a stable antibody structure.