Experimental RTM manufacturing analysis of carbon/epoxy composites for aerospace application

The success of manufacturing composite parts by liquid composite molding processes with RTM depends on tool designs, efficient heat system, a controlled injection pressure, a stabilized vacuum system, besides of a suitable study of the preform lay-up and the resin system choice. This paper reports how to assemble a RTM system in a laboratory scale by specifying heat, injection and vacuum system. The design and mold material were outlined by pointing out its advantages and disadvantages. Four different carbon fiber fabrics were used for testing the RTM system. The injection pressure was analyzed regarding fiber volume content, preform compression and permeability, showing how these factors can affect the process parameters. The glass transition temperature (Tg) around 203 ºC matched with the aimed temperature of the mold which ensured good distribution of the heat throughout the upper and lower mold length. The void volume fraction in a range of 2% confirmed the appropriate RTM system and parameters choice.

Uma análise da presença sindical nos Institutos de Previdência Municipal na região do ABC

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A microscopic analysis of the effects of root surface scaling with different power parameters of er,cr: YSGG laser

The aim of this study was to evaluate the effects of different power parameters of an Erbium, Cromium: Yttrium, Scandium, Gallium, Garnet laser (Er,Cr:YSGG laser) on the morphology, attachment of blood components (ABC), roughness, and wear on irradiated root surfaces. Sixty-five incisive bovine teeth were used in this study, 35 of which were used for the analysis of root surface morphology and ABC. The remaining 30 teeth were used for roughness and root wear analysis. The samples were randomly allocated into seven groups: G1: Er,Cr:YSGG laser, 0.5 W; G2: Er,Cr:YSGG laser, 1.0 W; G3: Er,Cr:YSGG laser, 1.5 W; G4: Er,Cr:YSGG laser, 2.0 W; G5: Er,Cr:YSGG laser, 2.5 W; G6: Er,Cr:YSGG laser, 3.0 W; G7: scaling and root planning (SRP) with manual curettes. The root surfaces irradiated by Er,Cr:YSGG at 1.0 W and scaling with manual curettes presented the highest degrees of ABC. The samples irradiated by the Er,Cr:YSGG laser were rougher than the samples treated by the manual curette, and increasing the laser power parameters caused more root wear and greater roughness on the root surface. The Er,Cr:YSGG laser is safe to use for periodontal treatment, but it is not appropriate to use irradiation greater than 1.0 W for this purpose. Microsc. Res. Tech. 78:529–535, 2015. © 2015 Wiley Periodicals, Inc.

Multivariate analysis for animal selection in experimental research

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

VIBRATIONAL ANALYSIS OF COORDINATION COMPOUNDS OF NICKEL (II): AN APPROACH TO THE TEACHING OF POINT GROUPS

VIBRATIONAL ANALYSIS OF COORDINATION COMPOUNDS OF NICKEL (II): AN APPROACH TO THE TEACHING OF POINT GROUPS. This paper presents an IR and Raman experiment executed during the teaching of the course "Chemical Bonds" for undergraduated students of Science and Technology and Chemistry at the Federal University of ABC, in order to facilitate and encourage the teaching and learning of group theory. Some key aspects of this theory are also outlined. We believe that student learning was more significant with the introduction of this experiment, because there was an increase in the discussions level and in the performance during evaluations. This work also proposes a multidisciplinary approach to include the use of quantum chemistry tools.

Analysis of surface hardness of artificially aged resin composites

This study evaluated the effect of artificially accelerated aging (AAA) on the surface hardness of eight composite resins: Filtek Z250, Filtek Supreme, 4 Seasons, Herculite, P60, Tetric Ceram, Charisma, and Filtek Z100. Sixteen specimens were made from the test piece of each material, using an 8.0 × 2.0 mm teflon matrix. After 24 hours, eight specimens from each material were submitted to three surface hardness readings using a Shimadzu Microhardness Tester for 5 seconds at a load of 50 gf. The other eight specimens remained in the artificially accelerated aging machine for 382 hours and were submitted to the same surface hardness analysis. The means of each test specimen were submitted to the Kolmogorov-Smirnov test (p > 0.05), ANOVA and Tukey test (p < 0.05). With regard to hardness (F = 86.74, p < 0.0001) the analysis showed significant differences among the resin composite brands. But aging did not influence the hardness of any of the resin composites (F = 0.39, p = 0.53). In this study, there was interaction between the resin composite brand and the aging factors (F = 4.51, p < 0.0002). It was concluded that notwithstanding the type of resin, AAA did not influence surface hardness. However, with regard to hardness there was a significant difference among the resin brands.

Texture analysis of cold rolled and annealed aluminum alloy produced by twin-roll casting

A 7.4 mm thick strip of 3003 aluminum alloy produced by the industrial twin-roll casting (TRC) process was homogenized at 500 °C for 12 hours, after which it was cold rolled in two conditions: 1) to reduce the strip's thickness by 67%, and 2) to reduce it by 91%. The alloy was annealed at 400 °C for 1 hour in both conditions. The results revealed that a rotated cube texture, the {001}<110> component, predominated in the as-cast condition and was transformed into brass, copper and S type textures during the cold rolling process. There was practically no difference between the deformation textures at the two thickness reductions.

Surface integrity analysis when milling ultrafine-grained steels

This paper quantifies the effects of milling conditions on surface integrity of ultrafine-grained steels. Cutting speed, feed rate and depth of cut were related to microhardness and microstructure of the workpiece beneath machined surface. Low-carbon alloyed steel with 10.8 µm (as-received) and 1.7 µm (ultrafine) grain sizes were end milled using the down-milling and dry condition in a CNC machining center. The results show ultrafine-grained workpiece preserves its surface integrity against cutting parameters more than the as-received material. Cutting speed increases the microhardness while depth of cut deepens the hardened layer of the as-received material. Also, deformations of microstructure following feed rate direction were observed in workpiece subsurface.

Differential expression of ABC transporters and their regulatory genes during lactation and dry period in bovine mammary tissue

ATP-binding cassette (ABC) transporters play a pivotal role in human physiology, and mutations in these genes often result in severe hereditary diseases. ABC transporters are expressed in the bovine mammary gland but their physiological role in this organ remains elusive. Based on findings in the context of human disorders we speculated that candidate ABC transporters are implicated in lipid and cholesterol transport in the mammary gland. Therefore we investigated the expression pattern of selected genes that are associated with sterol transport in lactating and nonlactating mammary glands of dairy cows. mRNA levels from mammary gland biopsies taken during lactation and in the first and second week of the dry period were analysed using quantitative PCR. Five ABC transporter genes, namely ABCA1, ABCA7, ABCG1, ABCG2 and ABCG5, their regulating genes LXRalpha, PPARgamma, SREBP1 and the milk proteins lactoferrin and alpha-lactalbumin were assessed. A significantly enhanced expression in the dry period was observed for ABCA1 while a significant decrease of expression in this period was detected for ABCA7, ABCG2, SREBP1 and alpha-lactalbumin. ABCG1, ABCG5, LXRalpha, PPARgamma and lactoferrin expression was not altered between lactation and dry period. These results indicate that candidate ABC transporters involved in lipid and cholesterol transport show differential mRNA expression between lactation and the dry period. This may be due to physiological changes in the mammary gland such as immigration of macrophages or the accumulation of fat due to the loss of liquid in the involuting mammary gland. The current mRNA expression analysis of transporters in the mammary gland is the prerequisite for elucidating novel molecular mechanisms underlying cholesterol and lipid transfer into milk.

ABC versus CAB for cardiopulmonary resuscitation: a prospective, randomized simulator-based trial

QUESTIONS UNDER STUDY: After years of advocating ABC (Airway-Breathing-Circulation), current guidelines of cardiopulmonary resuscitation (CPR) recommend CAB (Circulation-Airway-Breathing). This trial compared ABC with CAB as initial approach to CPR from the arrival of rescuers until the completion of the first resuscitation cycle. METHODS: 108 teams, consisting of two physicians each, were randomized to receive a graphical display of either the ABC algorithm or the CAB algorithm. Subsequently teams had to treat a simulated cardiac arrest. Data analysis was performed using video recordings obtained during simulations. The primary endpoint was the time to completion of the first resuscitation cycle of 30 compressions and two ventilations. RESULTS: The time to execution of the first resuscitation measure was 32 ± 12 seconds in ABC teams and 25 ± 10 seconds in CAB teams (P = 0.002). 18/53 ABC teams (34%) and none of the 55 CAB teams (P = 0.006) applied more than the recommended two initial rescue breaths which caused a longer duration of the first cycle of 30 compressions and two ventilations in ABC teams (31 ± 13 vs.23 ± 6 sec; P = 0.001). Overall, the time to completion of the first resuscitation cycle was longer in ABC teams (63 ± 17 vs. 48 ± 10 sec; P <0.0001).CONCLUSIONS: This randomized controlled trial found CAB superior to ABC with an earlier start of CPR and a shorter time to completion of the first 30:2 resuscitation cycle. These findings endorse the change from ABC to CAB in international resuscitation guidelines.

Play in Rats: Association across Contexts and Types , and Analysis of Structure.

Play has been proposed as a promising indicator of positive animal welfare. We aimed to study play in rats across contexts (conspecific/heterospecific) and types (social: pinning, being pinned; solitary: scampering), and we investigated its structure using behavioral sequence analysis. Group-housed (three per cage) adolescent male Lister Hooded rats (n = 21) were subjected to a Play-In-Pairs test: after a 3 hour isolation period, a pair of cage-mates was returned to the home cage and both social and solitary play were scored for 20 min. This procedure was repeated for each pair combination across three consecutive days, and individual play scores were calculated. Heterospecific play was measured using a Tickling test: rats were individually tickled by the experimenter through bouts of gentle, rapid finger movements on their underside, and the number of positive 50 kHz frequency modulated vocalizations and experimenter-directed approach behaviors were recorded. Both of the above tests were compared with social play in the home cage. While conspecific play in both the Play-In-Pairs test and home cage were correlated, both seemed to be unrelated to heterospecific play in the Tickling test. During the Play-In-Pairs test, although both solitary and social play types occurred, they were unrelated, and solitary locomotor play of one rat did not predict the subsequent play behavior of its cage mate. Analysis of play structure revealed that social play occurred more often in bouts of repeated behaviors while solitary play sequences did not follow a specific pattern. If play is to be used as an indicator of positive welfare in rats, context, type and structure differences should be taken into account.

A qualitative analysis of leadership styles and the selection of quality improvement in primary care practice

In the Practice Change Model, physicians act as key stakeholders, people who have both an investment in the practice and the capacity to influence how the practice performs. This leadership role is critical to the development and change of the practice. Leadership roles and effectiveness are an important factor in quality improvement in primary care practices.^ The study conducted involved a comparative case study analysis to identify leadership roles and the relationship between leadership roles and the number and type of quality improvement strategies adopted during a Practice Change Model-based intervention study. The research utilized secondary data from four primary care practices with various leadership styles. The practices are located in the San Antonio region and serve a large Hispanic population. The data was collected by two ABC Project Facilitators from each practice during a 12-month period including Key Informant Interviews (all staff members), MAP (Multi-method Assessment Process), and Practice Facilitation field notes. This data was used to evaluate leadership styles, management within the practice, and intervention tools that were implemented. The chief steps will be (1) to analyze if the leader-member relations contribute to the type of quality improvement strategy or strategies selected (2) to investigate if leader-position power contributes to the number of strategies selected and the type of strategy selected (3) and to explore whether the task structure varies across the four primary care practices.^ The research found that involving more members of the clinic staff in decision-making, building bridges between organizational staff and clinical staff, and task structure are all associated with the direct influence on the number and type of quality improvement strategies implemented in primary care practice.^ Although this research only investigated leadership styles of four different practices, it will offer future guidance on how to establish the priorities and implementation of quality improvement strategies that will have the greatest impact on patient care improvement. ^

Caracterización y análisis del coste de mejora de la calidad de servicio en transporte urbano en autobús, basado en la metodología ABC (activity based costing)

El estudio de la calidad de servicio en transporte público ha tenido distintos enfoques, tanto en la investigación como en sus aplicaciones prácticas, tales como el desarrollo del método SERVQUAL, los proyectos QUATTRO y EQUIP de la Comisión Europea, el Transit Capacity and Quality of Service Manual y finalmente el estándar EN 13816, siendo la consideración principal la calidad desde el punto de vista del usuario, es decir, la calidad percibida, cuyo objetivo en la práctica trata de obtener un Índice de Satisfacción del Cliente como medida de la calidad global. Esta aproximación deja de lado aspectos tanto sobre calidad suministrada como sobre los suministradores del servicio, las administraciones y los operadores, particularmente en cuanto a las implicaciones económicas. El objetivo principal de la presente tesis es la estimación del impacto económico real de la mejora de atributos de calidad para un operador de autobús urbano. En el capítulo 2, se lleva a cabo un análisis del estado del arte sobre el estudio de la calidad, tanto de los métodos de estudio, como de su aplicación al campo de transporte público, y, específicamente, del estudio de costes. En los capítulos 3 y 4 se propone la aplicación de la metodología ABC (Activity Based Costing) para el caso de un contrato de servicio de transporte público en autobús en la Comunidad de Madrid, concretamente la conexión de Tres Cantos. Para ello se utilizan datos de encuestas de calidad esperada y percibida por los usuarios, junto con información económica y de actividad, así como entrevistas a personal de la empresa, conformando todo ello una metodología compacta de investigación y análisis. Los resultados de las encuestas y los análisis posteriores identificaron la frecuencia de servicio, la puntualidad de los autobuses y la seguridad de la conducción como las tres variables mas importantes desde el punto de vista del usuario, y ha sido en referencia a estas tres variables sobre las que se ha desarrollado la aplicación del método ABC contenida en el capítulo 5. Los resultados descritos en el capítulo 6 muestran la consistencia y la aplicabilidad de esta metodología, superando las simplificaciones de los procedimientos tradicionales contables. En cuanto a los resultados obtenidos, se ha comprobado que una aproximación tradicional basada en costes por kilometro puede llegar a sobrevalorar los costes asociados a mejoras de calidad hasta tres veces los costes calculados según el método ABC. Finalmente en el capítulo 7 se recogen las principales conclusiones y se apuntan algunas líneas futuras de investigación basadas en mejoras sobre la aplicación y transferibilidad de los resultados. The study of service quality and its implication for transport contracts has several approaches in research and practical applications, such as the development of the SERVQUAL method, the UE QUATTRO and EQUIP research projects, the Transit Capacity and Quality of Service Manual and finally the EN 13816 standard. In all cases the main stream is the consideration of quality from the user’s point of view, thus obtaining a Customer Satisfaction Index as a measurement of the overall service quality. This approach ignores quality consequences for transport providers, authorities and operators, particularly economic implications. The main target of this thesis is to estimate the real economic impact of improving quality attributes for a bus operator. Chapter 2 includes a thorough analysis of the state of the art of general methodologies on service quality, their applications for public transport, and particularly for quality costing. In chapters 3 and 4, the Activity Based Costing (ABC) methodology is proposed for a suburban bus contract in Madrid, Tres Cantos. Perceived and expected quality surveys are used together with economic and performance information, as well as interviews with key staff from the operator. The whole set of surveys, interviews and ABC methodology puts together a comprehensive approach for analysis and research. Surveys and subsequent analysis shows service headway, punctuality and safety as the three most important service attributes from the user’s point of view. The proposed methodology has been applied to these three variables, as described in chapter 5. Results obtained in chapter 6 show the consistency and practicality of this methodology, overcoming simplifications from traditional accounting procedures. According to the latter, a calculation of costs based on mileage can overvalue quality improvements up to three times the results following ABC methodology. Finally, in chapter 7, the main conclusions are highlighted and some future research is suggested in terms of application improvements as well as results transferability.

ANÁLISE DO DISCURSO RELIGIOSO: MARCAS DA PÓS-MODERNIDADE NAS PRÉDICAS DE UMA IGREJA METODISTA NO ABC

Este trabalho, situado na área de Práxis Religiosa e Sociedade, analisa a interação entre o protestantismo brasileiro e a Pós-modernidade, possibilitando uma observação de certas mudanças e/ou transformações que este intercâmbio provoca neste setor religioso aproximando-o ou distanciando de algumas características próprias de suas origens protestantes. Para tanto, restringe-se ao metodismo, especificamente, uma Igreja Metodista no ABC e, por meio de uma pesquisa qualitativa, avalia como algumas marcas pósmodernas circulam nas prédicas proferidas na comunidade escolhida, ou seja, a Igreja Metodista em Santo André. O método analítico utilizado é a Análise do Discurso de linha bakhtiniana, cuja apreciação avalia a prédica como discurso verbal relacionado a uma situação social extraverbal que o engendra. Entretanto, nesta proposta de reflexão crítica, faz-se uso, também, das contribuições profícuas de outras áreas do saber, isto é, da Teologia (homilética) e da Sociologia do Protestantismo que permitem uma compreensão mais ampla dos assuntos tratados.(AU)

ANÁLISE DO DISCURSO RELIGIOSO: MARCAS DA PÓS-MODERNIDADE NAS PRÉDICAS DE UMA IGREJA METODISTA NO ABC

Este trabalho, situado na área de Práxis Religiosa e Sociedade, analisa a interação entre o protestantismo brasileiro e a Pós-modernidade, possibilitando uma observação de certas mudanças e/ou transformações que este intercâmbio provoca neste setor religioso aproximando-o ou distanciando de algumas características próprias de suas origens protestantes. Para tanto, restringe-se ao metodismo, especificamente, uma Igreja Metodista no ABC e, por meio de uma pesquisa qualitativa, avalia como algumas marcas pósmodernas circulam nas prédicas proferidas na comunidade escolhida, ou seja, a Igreja Metodista em Santo André. O método analítico utilizado é a Análise do Discurso de linha bakhtiniana, cuja apreciação avalia a prédica como discurso verbal relacionado a uma situação social extraverbal que o engendra. Entretanto, nesta proposta de reflexão crítica, faz-se uso, também, das contribuições profícuas de outras áreas do saber, isto é, da Teologia (homilética) e da Sociologia do Protestantismo que permitem uma compreensão mais ampla dos assuntos tratados.(AU)