P2P信任模型中基于行为相似度的共谋团体识别模型

提出了一种P2P环境下的基于节点行为相似度的共谋团体识别模型CCD(colludingcliquedetector),并给出了该模型的数学描述和分布式实现方法。该模型可以通过分析节点之间的行为相似度有效地检测出信任模型中存在的共谋团体,从而帮助信任模型排除共谋团体的干扰。仿真实验表明,CCD模型在共谋团体的检测和抵制方面效果显著,使信任模型在面对共谋攻击时的健壮性和下载成功率都大大提高。

R22－DMA吸收压缩式热泵实验与分析

R22－DMA吸收压缩式热泵实验与分析1引言热泵技术作为一种逆向能量转换方式广泛应用于工业余热的回收利用和建筑物的空调与...

施肥措施对黄土旱塬区小麦产量和土壤有机碳积累的影响

利用中国科学院长武农田生态试验站的长期田间试验(1984年2~007年),研究了小麦产量,耕层有机碳变化,评价了土壤管理和气候因素对土壤有机碳(Soil organic C,SOC)变化的影响。研究涉及6个处理:休闲地(F);不施肥(CK);有机肥(M);氮肥(N);氮、磷肥(NP)和氮、磷、有机肥(NPM)处理。结果表明,施肥可以显著提高作物产量和SOC积累,CK、M、N、NP、NPM处理平均产量依次为1.5、2.6、2.0、3.3、4.0 t/hm2,2007年F、CK、M、N、NP、NPM处理0—20 cm土层SOC积累量依次为-1.09、0.76、8.59、1.02、3.42和9.5 t/hm2。作物产量与SOC含量呈显著的正相关关系(r=0.80),有机碳输入量与SOC含量相关性更好(r=0.97),外源有机碳的输入也是提高SOC的重要措施。施肥措施对作物固碳和SOC影响存在显著(P<0.05)差异。土壤固碳速率(Y)与SOC输入量(X)符合线性方程Y=0.231X-0.0813(r=0.98)。施肥可以提高黄土高原半干旱地区土壤生产力和SOC的积累,且无机肥和有机肥配施效果最佳。

预注入对Si_(1-x)C_x合金形成的影响

室温下在单晶Si中注入 (0 6— 1 5 )at%的C原子 ,部分样品在C离子注入之前在其中注入2 9Si+ 离子产生损伤 ,然后在相同条件下利用高温退火固相外延了Si1 -xCx 合金 ,研究了预注入对Si1 -xCx 合金形成的影响 .如果注入C离子的剂量小于引起Si非晶化的剂量 ,在 95 0℃退火过程中注入产生的损伤缺陷容易与C原子结合形成缺陷团簇 ,难于形成Si1 -xCx 合金 ,预注入形成的损伤有利于合金的形成 .随着C离子剂量的增大 ,注入产生的损伤增强 ,预注入反而不利于Si1 -xCx 合金的形成 ,但当注入C原子的浓度超过固相外延的溶解度时 ,预注入的影响可以忽略 .退火温度升高到 10 5 0℃ ,无论预注入还是未预注入样品 ,C含量低的合金相仍然保留 ,而C含量高的合金相大部分消失 .

Electrochemical corrosion behavior of Mg-5Al-0.4Mn-xNd in NaCl solution

The electrochemical corrosion behavior of Mg-5Al-0.4Mn-xNd (x = 0, 1, 2 and 4 wt.%) alloys in 3.5% NaCl solution was investigated. The corrosion behavior of the alloys was assessed by open circuit potential measure, potentiodynamic polarization, and electrochemical impedance spectroscopy. The electrochemical results show the intermetallic precipitates with Nd behave as less noble cathodes in micro-galvanic corrosion and suppress the cathodic process. During corrosion, Al2O3 and Nd2O3, in proper ratio, is incorporated into the corrosion film, and enhances the corrosion resistance.

Electric-field-induced molecular alignment of side-chain liquid-crystalline polyacetylenes containing biphenyl mesogens

Electric-field-induced molecular alignments of side-chain liquid-crystalline polyacetylenes [-{HC=C[(CH2)(m)OCO-biph-OC7H15]}-, where biph is 4,4'-biphenylyl and m is 3 (PA3EO7) or 9 (PA9EO7)] were studied with X-ray diffraction and polarized optical microscopy. An orientation as high as 0.84 was obtained for PA9EO7. Furthermore, the molecular orientation of]PA9EO7 was achieved within a temperature range between the isotropic-to-smectic A transition temperature and 115 degreesC, and this suggested that the orientational packing was affected by the thermal fluctuation of the isotropic liquid and the mobility of the mesogenic moieties. The maximum achievable orientation for PA9EO7 was much greater than that for PA3EO7. This was the first time that the electric-field-induced molecular orientation of a side-chain liquid-crystalline polymer with a stiff backbone was studied.

Pink light emitting long-lasting phosphorescence in Sm3+-doped CdSiO3

Novel pink light emitting long-lasting afterglow CdSiO3:SM3+ phosphors are prepared by the conventional high-temperature solid-state method and their luminescent properties are investigated. XRD and photolurflinescence (PL) spectra are used to characterize the synthesized phosphors. The phosphors are well crystallized by calcinations at 1050degreesC for 5 h. These phosphors emit pink light and show long-lasting phosphorescence after they are excited with 254 nm ultraviolet light. The phosphorescence lasts for nearly 5 h in the light perception of the dark-adapted human eye (0.32mcd/m(2)). The phosphorescence mechanism is also investigated. All the results indicate that these phosphors have promising potential practical applications.

Synthesis of novel nitrogen- and sulfur-containing conjugated polymers used as hole-transporting materials for organic light-emitting diodes

Two series of highly soluble novel nitrogen- and sulfur-containing conjugated polymers were synthesized via an acid-induced self-polycondensation of functional monomers with methyl sulfinyl and aromatic groups. The well-defined structures of synthesized polymers were confirmed by their NMR and IR spectra. The highest occupied molecular orbital energy values for these materials, estimated by cyclic voltammetry, showed a broad range of values from about 5.0 to 5.2 eV used as hole-transport layers (HTL) in two-layer light-emitting diodes ITO/HTL/Alq(3)/Mg:Ag [ITO = indium tin oxide, and Alq(3) = tris(8-quinolinato) aluminum]. The typical turn-on voltage of these diodes was about 4-5 V. The maximum brightness of the device was about 3440 cd/m(2) at 20 V. The maximum efficiency was estimated to be 0.15 1m/W at 10 V.