Stable carbon isotopic analyses of n-alkanes and the calculated C4 plant-derived fractions in the dust samples

Atmospheric dust samples collected along a transect off the West African coast have been investigated for their lipid content and compound-specific stable carbon isotope compositions. The saturated hydrocarbon fractions of the organic solvent extracts consist mainly of long-chain n-alkanes derived from epicuticular wax coatings of terrestrial plants. Backward trajectories for each sampling day and location were calculated using a global atmospheric circulation model. The main atmospheric transport took place in the low-level trade-wind layer, except in the southern region, where long-range transport in the mid-troposphere occurred. Changes in the chain length distributions of the n-alkane homologous series are probably related to aridity, rather than temperature or vegetation type. The carbon preference of the leaf-wax n-alkanes shows significant variation, attributed to a variable contribution of fossil fuel- or marine-derived lipids. The effect of this nonwax contribution on the d13C values of the two dominant n-alkanes in the aerosols, n-C29 and n-C31 alkane, is, however, insignificant. Their d13C values were translated into a percentage of C4 vs. C3 plant type contribution, using a two-component mixing equation with isotopic end-member values from the literature. The data indicate that only regions with a predominant C4 type vegetation, i.e. the Sahara, the Sahel, and Gabon, supply C4 plant-derived lipids to dust organic matter. The stable carbon isotopic compositions of leaf-wax lipids in aerosols mainly reflect the modern vegetation type along their transport pathway. Wind abrasion of wax particles from leaf surfaces, enhanced by a sandblasting effect, is most probably the dominant process of terrigenous lipid contribution to aerosols.

Widespread exploitation of the honeybee by early Neolithic farmers

The pressures on honeybee (Apis mellifera) populations, resulting from threats by modern pesticides, parasites, predators and diseases, have raised awareness of the economic importance and critical role this insect plays in agricultural societies across the globe. However, the association of humans with A. mellifera predates post-industrial-revolution agriculture, as evidenced by the widespread presence of ancient Egyptian bee iconography dating to the Old Kingdom (approximately 2400 bc)1. There are also indications of Stone Age people harvesting bee products; for example, honey hunting is interpreted from rock art2 in a prehistoric Holocene context and a beeswax find in a pre-agriculturalist site3. However, when and where the regular association of A. mellifera with agriculturalists emerged is unknown4. One of the major products of A. mellifera is beeswax, which is composed of a complex suite of lipids including n-alkanes, n-alkanoic acids and fatty acyl wax esters. The composition is highly constant as it is determined genetically through the insect’s biochemistry. Thus, the chemical ‘fingerprint’ of beeswax provides a reliable basis for detecting this commodity in organic residues preserved at archaeological sites, which we now use to trace the exploitation by humans of A. mellifera temporally and spatially. Here we present secure identifications of beeswax in lipid residues preserved in pottery vessels of Neolithic Old World farmers. The geographical range of bee product exploitation is traced in Neolithic Europe, the Near East and North Africa, providing the palaeoecological range of honeybees during prehistory. Temporally, we demonstrate that bee products were exploited continuously, and probably extensively in some regions, at least from the seventh millennium cal bc, likely fulfilling a variety of technological and cultural functions. The close association of A. mellifera with Neolithic farming communities dates to the early onset of agriculture and may provide evidence for the beginnings of a domestication process.

Toward A Reliable Quality Control Test For Microneedle Insertion

Microneedles (MNs) are emerging devices that can be used for the delivery of drugs at specific locations1. Their performance is primarily judged by different features and the penetration through tissue is one of the most important aspects to evaluate. For detailed studies of MN performance different kind of in-vitro, exvivo and in-vivo tests should be performed. The main limitation of some of these tests is that biological tissue is too heterogeneous, unstable and difficult to obtain. In addition the use of biological materials sometimes present legal issues. There are many studies dealing with artificial membranes for drug diffusion2, but studies of artificial membranes for Microneedle mechanical characterization are scarce3. In order to overcome these limitations we have developed tests using synthetic polymeric membranes instead of biological tissue. The selected artificial membrane is homogeneous, stable, and readily available. This material is mainly composed of a roughly equal blend of a hydrocarbon wax and a polyolefin and it is commercially available under the brand name Parafilm®. The insertion of different kind of MN arrays prepared from crosslinked polymers were performed using this membrane and correlated with the insertion of the MN arrays in ex-vivo neonatal porcine skin. The insertion depth of the MNs was evaluated using Optical coherence tomography (OCT). The implementation of MN transdermal patches in the market can be improved by make this product user-friendly and easy to use. Therefore, manual insertion is preferred to other kind of procedures. Consequently, the insertion studies were performed in neonatal porcine skin and the artificial membrane using a manual insertion force applied by human volunteers. The insertion studies using manual forces correlated very well with the same studies performed with a Texture Analyzer equipment. These synthetic membranes seem to mimic closely the mechanical properties of the skin for the insertion of MNs using different methods of insertion. In conclusion, this artificial membrane substrate offers a valid alternative to biological tissue for the testing of MN insertion and can be a good candidate for developing a reliable quality control MN insertion test.

Selection and Floral Evolution in Platanthera bifolia and P. chlorantha (Orchidaceae)

Natural selection mediated by pollinators has influenced the evolution of floral diversity of the flowering plants (angiosperms). The scope of this thesis was to study: 1) phenotypic selection, 2) mating systems, and 3) floral shifts involved in plant speciation. Model plant species were Platanthera bifolia and P. chlorantha (Orchidaceae). These orchids are moth-pollinated, strictly co-sexual (bisexual flowers), and produce a spike that displays 10-20 white flowers. I explored the influence of characters on plant fitness by using multiple linear regressions. Pollen removal (male fitness) and fruit set (female fitness) increased with more flowers per plant in three P. bifolia populations. There was selection towards longer spurs in a dry year when average spur length was shorter than in normal-wet years. Female function was sensitive to drought, which enabled an application of the male function hypothesis of floral evolution (Bateman's principle). The results show that selection may vary between populations, years, and sex-functions. I examined inbreeding by estimating levels of geitonogamy (self-pollination between flowers of an individual) with an emasculation method in two P. bifolia populations. Geitonogamy did not vary with inflorescence size. Levels of geitonogamy was 20-40% in the smaller, but non-significant in the larger population. This may relate to lower number of possible mates and pollinator activity in the smaller population. Platanthera bifolia exhibits the ancestral character state of tongue-attachment of pollinia on the pollinator. Its close relative P. chlorantha attaches its pollinia onto the pollinator's eyes. To explore the mechanism of a floral shift, pollination efficiency and speed was compared between the two species. The results showed no differences in pollination efficiency, but P. chlorantha had faster pollen export and import. Efficiency of pollination in terms of speed may cause floral shifts, and thus speciation.

Un approccio analitico innovativo per lo studio della frazione volatile di oli vergini da olive: Flash-Gascromatography E-Nose

Lo scopo di questo lavoro di tesi è stato quello di studiare l’efficacia e l’applicabilità dello strumento HERACLES II Flash Gas Chromatography Electronic Nose mediante l’analisi di un set molto ampio di campioni di oli d’oliva vergini reperiti presso un concorso nazionale. Nello specifico, mediante elaborazioni di statistica multivariata dei dati, è stata valutata sia la capacità discriminante del metodo per campioni caratterizzati da un diverso profilo sensoriale, sia la correlazione esistente tra l’intensità delle sensazioni percepite per via sensoriale ed i dati ottenuti mediante l’analisi strumentale. La valutazione delle caratteristiche sensoriali dei campioni è stata realizzata in occasione dello stesso concorso da parte di un gruppo di giudici esperti e secondo le modalità stabilite dai regolamenti comunitari. Ogni campione è stato valutato da almeno 8 assaggiatori che hanno determinato l’intensità di caratteristiche olfattive (eventuali difetti, fruttato e note secondarie positive) e gustative (amaro e piccante). La determinazione dei composti volatili, invece, è stata condotta mediante lo strumento HERACLES II Electronic Nose (AlphaMOS), dotato di due colonne cromatografiche caratterizzate da diversa polarità (MXT-5 con fase stazionaria apolare e MXT-WAX con fase stazionaria polare), ciascuna collegata ad un rivelatore di tipo FID. L’elaborazione multivariata dei dati è stata realizzata mediante il software in dotazione con lo strumento.

Los óleos alquídicos Griffin : Composición, propiedades y aplicación

Uno de los principales inconvenientes que tiene la pintura al óleo es su lento secado. Dicho esto, cabe preguntarse si existe algún tipo de pintura que tenga las cualidades de los óleos pero que sequen más rápido que estos. La respuesta, afirmativa, la encontramos en los óleos alquídicos, que en nuestro país únicamente se comercializan bajo la marca Griffin de Winsor & Newton. Se trata de unas pinturas relativamente recientes, poco conocidas por los pintores y muy poco estudiadas. Con el objetivo de paliar estas carencias, el presente artículo contiene las principales conclusiones de un trabajo en el que se ha estudiado la composición de las pinturas Griffin, sus principales características (viscosidad, brillo, flexibilidad, textura, opacidad, secado que es lo que más nos interesa, estabilidad etc.), su aplicación práctica mediante el arte pictórico (soportes, disolventes, reglas para pintar, correcciones, veladuras, barnizado, etc.) y su mezcla con otro tipo de procedimientos pictóricos como el óleo, el acrílico, la cera encáustica y diversos temples (huevo, cola y caseína).

Postharvest treatment effects on 'B74' mango fruit lenticel discolouration after irradiation

Lenticel discolouration (LD) is a common disorder of mango fruit around the world. It results in poor appearance and disappointment of consumers. LD is exacerbated by treatment of mango fruit with gamma irradiation for insect disinfestation. The issue is problematic on the relatively new mango cultivar 'B74' and may represent an oxidative browning process. With a view to reducing irradiationinduced LD on 'B74', postharvest wax (one and three layers; 75% carnauba wax) and antioxidant (100 mM ascorbic acid, 100 mM calcium chloride, 10, 50 and 100 mM calcium ascorbate) dip treatments were investigated. Treatment of green mature fruit with three layers of wax prior to exposure to 557 Gy gamma irradiation reduced LD by 40% relative to the non-waxed control. However, the fruit failed to ripen properly as evidenced by delayed skin colour change, retarded softening and increased skin browning as compared to the controls and fruit coated with one layer of wax. Treatment with one layer of wax did not reduce LD. Mechanistically, the responses suggest that air exchange plays a pivotal role in LD. A lowered oxygen concentration in the lenticels may reduce the disorder after irradiation treatment. Postharvest treatments with the various antioxidants failed to reduce LD. Rather, all antioxidant treatments at the test concentrations, except calcium chloride, significantly increased skin browning.

Low doses of a neonicotinoid insecticide modify pheromone response thresholds of central but not peripheral olfactory neurons in a pest insect

International audience

Characterization of water-soluble organic compounds in bioaerosols by liquid chromatography and fluorescence spectroscopy

In the last decades, the effects of the air pollution have been increasing, especially in the case of the human health diseases. In order to overcome this problem, scientists have been studying the components of the air. As a part of water-soluble organic compounds, amino acids are present in the atmospheric environment as components of diverse living organisms which can be responsible for spreading diseases through the air. Liquid chromatography is one technique capable of distinguish the different amino acids from each other. In this work, aiming at separating the amino acids found in the aerosols samples collected in Aveiro, the ability of four columns (Mixed-Mode WAX-1, Mixed-Mode HILIC-1, Luna HILIC and Luna C18) to separate four amino acids (aspartic acid, lysine, glycine and tryptophan) and the way the interaction of the stationary phases of the columns with the analytes is influenced by organic solvent concentration and presence/concentration of the buffer, are being assessed. In the Mixed-Mode WAX-1 column, the chromatograms of the distinct amino acids revealed the separation was not efficient, since the retention times were very similar. In the case of lysine, in the elution with 80% (V/V) MeOH, the peaks appeared during the volume void. In the Mixed-Mode HILIC-1 column, the variation of the organic solvent concentration did not affect the elution of the four studied amino acids. Considering the Luna HILIC column, the retention times of the amino acids were too close to each other to ensure a separation among each other. Lastly, the Luna C18 column revealed to be useful to separate amino acids in a gradient mode, being the variation of the mobile phase composition in the organic solvent concentration (ACN). Luna C18 was the column used to separate the amino acids in the real samples and the mobile phase had acidified water and ACN. The gradient consisted in the following program: 0 – 2 min: 5% (V/V) ACN, 2 – 8 min: 5 – 2 % (V/V) ACN, 8 – 16 min: 2% (V/V) ACN, 16 – 20 min: 2 – 20 % (V/V) ACN, 20 – 35 min: 20 – 35 % (V/V) ACN. The aerosols samples were collected by using three passive samplers placed in two different locations in Aveiro and each sampler had two filters - one faced up and the other faced down. After the sampling, the water-soluble organic compounds was extracted by dissolution in ultra-pure water, sonication bath and filtration. The resulting filtered solutions were diluted in acidified water for the chromatographic separation. The results from liquid chromatography revealed the presence of the amino acids, although it was not possible to identify each one of them individually. The chromatograms and the fluorescence spectra showed the existence of some patterns: the samples that correspond to the up filters had more intense peaks and signals, revealing that the up filters collected more organic matter.

Investigation into various fungicides and alternative solutions for controlling postharvest diseases in papaya fruit

In Australia, Sportak® (a.i., prochloraz) has been registered since the early 1980's for the postharvest control of both anthracnose and stem-end rots in papaya fruit, despite the persistence of fruit breakdown due to disease during transit and at market destinations. Consequently, the Australian papaya industry has been concerned over the efficacy of prochloraz and whether substitute or alternative solutions were available for better disease control, particularly during times of peak disease pressure. This study therefore investigated the effects of various postharvest treatments for disease control in papaya. Fruit were harvested at colour break from coastal farms in Far North Queensland and treated with commercial rates of various fungicides, including prochloraz, imazalil, thiabendazole and fludioxonil. Additional solutions known to inhibit disease were examined, including chitosan and carnauba wax both with and without ammonium carbonate (AC). Following treatment, fruit were ripened and assessed for quality over their shelf life. Fludioxonil when applied as a hot dip was found to be a more efficacious treatment for control of disease in papaya than prochloraz. The other fungicides were moderately effective, as both thiabendazol and prochloraz exhibited an intermediate response and imazalil was the least effective. Disease severity was lowest in fruit treated with AC followed by chitosan, whilst chitosan delayed degreening. Overall, the study found that hot fludioxonil provided an effective replacement of the currently registered chemical prochloraz, and that alternate solutions such chitosan and AC may also be beneficial, particularly for low chemical input farming systems.

Self-sealing of thermal fatigue and mechanical damage in fiber-reinforced composite materials

Fiber reinforced composite tanks provide a promising method of storage for liquid oxygen and hydrogen for aerospace applications. The inherent thermal fatigue of these vessels leads to the formation of microcracks, which allow gas phase leakage across the tank walls. In this dissertation, self-healing functionality is imparted to a structural composite to effectively seal microcracks induced by both mechanical and thermal loading cycles. Two different microencapsulated healing chemistries are investigated in woven glass fiber/epoxy and uni-weave carbon fiber/epoxy composites. Self-healing of mechanically induced damage was first studied in a room temperature cured plain weave E-glass/epoxy composite with encapsulated dicyclopentadiene (DCPD) monomer and wax protected Grubbs' catalyst healing components. A controlled amount of microcracking was introduced through cyclic indentation of opposing surfaces of the composite. The resulting damage zone was proportional to the indentation load. Healing was assessed through the use of a pressure cell apparatus to detect nitrogen flow through the thickness direction of the damaged composite. Successful healing resulted in a perfect seal, with no measurable gas flow. The effect of DCPD microcapsule size (51 um and 18 um) and concentration (0 - 12.2 wt%) on the self-sealing ability was investigated. Composite specimens with 6.5 wt% 51 um capsules sealed 67% of the time, compared to 13% for the control panels without healing components. A thermally stable, dual microcapsule healing chemistry comprised of silanol terminated poly(dimethyl siloxane) plus a crosslinking agent and a tin catalyst was employed to allow higher composite processing temperatures. The microcapsules were incorporated into a satin weave E-glass fiber/epoxy composite processed at 120C to yield a glass transition temperature of 127C. Self-sealing ability after mechanical damage was assessed for different microcapsule sizes (25 um and 42 um) and concentrations (0 - 11 vol%). Incorporating 9 vol% 42 um capsules or 11 vol% 25 um capsules into the composite matrix leads to 100% of the samples sealing. The effect of microcapsule concentration on the short beam strength, storage modulus, and glass transition temperature of the composite specimens was also investigated. The thermally stable tin catalyzed poly(dimethyl siloxane) healing chemistry was then integrated into a [0/90]s uniweave carbon fiber/epoxy composite. Thermal cycling (-196C to 35C) of these specimens lead to the formation of microcracks, over time, formed a percolating crack network from one side of the composite to the other, resulting in a gas permeable specimen. Crack damage accumulation and sample permeability was monitored with number of cycles for both self-healing and traditional non-healing composites. Crack accumulation occurred at a similar rate for all sample types tested. A 63% increase in lifetime extension was achieved for the self-healing specimens over traditional non-healing composites.

Efeito do revestimento nas propriedades das rolhas de cortiça

A utilização de revestimentos poliméricos em rolhas de cortiça natural é uma prática recorrente na indústria de produção de rolhas. A sua aplicação tem como principal objetivo a melhoria da qualidade visual das rolhas. Contudo, este tratamento altera também as suas caraterísticas de molhabilidade, pelo que é importante otimizar os processos de revestimento de superfície. O presente trabalho teve como objetivo principal a averiguação da influência de um revestimento colorido e de diferentes tratamentos de superfície no comportamento da rolha em garrafa. Foram utilizadas amostras, cedidas pela Cork Supply Portugal, provenientes de quatro branqueamentos distintos (LVL, CSP, CPI e SIL). Foram estudadas amostras com e sem revestimento colorido e, todas elas, tratadas superficialmente com quatro tipos de tratamento (TS1, TS2, TS3 e TS4), sendo as quantidades de parafina e silicone administradas todas diferentes. Para observar o efeito do revestimento colorido e dos tratamentos de superfície nas rolhas de cortiça, procedeu-se a testes para determinação de capilaridade, inserções e forças de extração, simulando as condições de engarrafamento/extração do cliente, de forma a verificar a conformidade dos resultados. Todos estes testes procederam-se nas instalações da CSP. Foram também efetuados testes de molhabilidade pela determinação de ângulos de contacto para três diferentes solventes, nomeadamente água, formamida e diiodometano, e obtidos os Wetting Envelopes, pelo método de OWRK, de forma a prever a molhabilidade das várias amostras. Os procedimentos experimentais descritos efetuaram-se nos laboratórios da Universidade de Aveiro. Aliando as análises aos vários testes efetuados, concluiu-se que o revestimento colorido tem um possível efeito favorecedor nas propriedades mecânicas das rolhas de cortiça, possui maior recetividade aos agentes lubrificantes e maior molhabilidade. Relativamente aos tratamentos de superfície, o melhor, tendo em conta os fatores de molhabilidade, foi o TS4, proporcionando melhor vedação ao vinho. Já a respeito da lubrificação, verificou-se melhores resultados para os tratamentos TS1 e TS2. A lavação SIL apresenta menor afinidade aos agentes vedantes e a CSP possui maior recetibilidade aos agentes lubrificantes.

Avaliação de Impacto Ambiental, Valorização do Efluente e dos Resíduos Sólidos da Indústria Corticeira

A preocupação com o meio ambiente, nomeadamente na descarga de águas residuais, consumo de água excessivo e produção de resíduos industriais, está cada vez mais presente no quotidiano. Devido a estas problemáticas, efetuou-se a avaliação de impacte ambiental (AIA) do processo produtivo das rolhas de cortiça naturais, tratamento das águas de cozedura da cortiça (estudo da possível reutilização do efluente tratado) e valorização de subprodutos – resíduo sólido (raspa de cortiça), sendo estes os objetivos propostos para a realização da presente dissertação. Na AIA, efetuada no decorrer das fases da Análise do Ciclo de Vida (ACV), foram selecionadas 8 categorias de impacte – aquecimento global, acidificação, dessecação, toxicidade e ecotoxicidade, eutrofização, consumo de recursos não renováveis e oxidação foto-química. A água de cozedura caracterizou-se por uma elevada carga poluente, apresentando elevada concentração de cor, Carência Química de Oxigénio (CQO), taninos e lenhina e Sólidos Suspensos Totais (SST). O processo de tratamento proposto consistiu num pré-tratamento por ultrafiltração (UF), com membranas de 30.000 e 20.000 MWCO, seguido de adsorção por carvão ativado (comercial e produzido a partir de raspa de cortiça). No tratamento por UF, utilizando uma membrana de 30.000 MWCO, foram obtidas percentagens de remoção para a primeira amostra de água de cozedura de 74,8 % para a cor, 33,1 % para a CQO e para a segunda amostra de 85,2 % para a cor e 41,8 % para a CQO. Posteriormente, apenas para a segunda amostra de água de cozedura e com uma membrana de 20.000 MWCO, as percentagens de remoção obtidas foram superiores, de 93% para a cor, 68,9 % para a CQO, 88,4 % para taninos e lenhina e 43,0 % para azoto total. No tratamento por adsorção com carvão ativado estudou-se o tempo de equilíbrio do carvão ativado comercial e do carvão ativado produzido a partir de aparas de cortiça, seguindo-se o estudo das isotérmicas de adsorção, no qual foram analisados os parâmetros da cor e CQO para cada solução. Os ajustes dos modelos teóricos aos pontos experimentais demonstraram que ambos os modelos (Langmuir e Freundlich) poderiam ser considerados, uma vez que apresentaram ajustes idênticos. Relativamente ao tratamento de adsorção em contínuo do permeado, obtido por UF com membrana de 20.000 MWCO, constatou-se que ambos os carvões ativados (comercial e produzido) não ficaram saturados, tendo em consideração os tempos de saturação estimados pela capacidade máxima de adsorção (determinada para a isotérmica de Langmuir) e as representações gráficas dos valores experimentais obtidos para cada ensaio. No ensaio de adsorção com carvão ativado comercial verificou-se que o efluente tratado poderia ser descarregado no meio hídrico ou reutilizado no processo industrial (considerando os parâmetros analisados), uma vez que até aos 11 minutos de ensaio a concentração da solução à saída foi de 111,50 mg/L O2, para a CQO, e incolor, numa diluição de 1:20. Em relação à adsorção em contínuo com carvão ativado produzido verificou-se no ensaio 4 que o efluente resultante apresentou uma concentração de CQO de 134,5 mg/L O2 e cor não visível, numa diluição de 1:20, ao fim de 1h22 min de ensaio. Assim, concluiu-se que os valores obtidos são inferiores aos valores limite de emissão (VLE) presentes no Decreto-Lei n.º 236/98 de 1 de Agosto. O carvão ativado produzido apresentou elevada área superficial específica, com 870 m2/g, comparativamente ao carvão comercial que foi de 661 m2/g. O processo de extração da suberina a partir de raspa de cortiça isenta de extraíveis, efetuado através da metanólise alcalina, apresentou percentagens de extração superiores aos restantes métodos. No processo efetuado em scale-up, por hidrólise alcalina, obteve-se uma extração de 3,76 % de suberina. A aplicação da suberina no couro demonstrou que esta cera apresenta enormes potencialidades, uma vez que a sua aplicação confere ao couro um aspeto sedoso, com mais brilho e um efeito de “pull-up”.

The spatial rhetoric of Gustav Zeiller's popular anatomical museum

This article focuses on the public experience of science by studying the exhibition practice of a small popular anatomy museum. The owner, Gustav Zeiller, a little-known German model maker and entrepreneur, opened his private collection in Dresden in 1888 with the aim of providing experts and laymen alike with a scientific education on bodily matters and health care. The spatial configuration of his museum environment turned the wax models into didactic instruments. Relying on the possible connexion between material culture studies and history of the emotions, this article highlights how Zeiller choreographed the encounter between the museum objects and its visitors. I argue that the spatial set up of his museum objects entailed rhetorical choices that did not simply address the social utility of his museum. Moreover, it fulfilled the aim of modifying the emotional disposition of his intended spectatorship. I hope to show that studying the emotional responses toward artefacts can offer a fruitful approach to examine the public experience of medicine.

Microlepidoptera of Illinois hill prairies

Among insects, which are the most diverse eukaryotic group on earth, Lepidoptera is one of four enormously diverse orders, with approximately 10,000 described species in North America. Within the order, Nearctic “microlepidoptera,” which represent an overwhelmingly large percentage of diversity within the order, remain poorly known despite their ecological importance in many plant communities. In this thesis, I undertook several studies of microlepidoptera diversity in a natural community type (hill prairie) and a managed community type (biofuel feedstock). In two Illinois hill prairies differing in size, latitude, and plant composition, alpha diversity of Pyraloidea and Tortricidae was similar, but the prairies were found to support different sets of species of these moth groups. It is concluded that the similarity in alpha diversity occurs because the larger prairie supports primarily a complement of moth species that feed as larvae on prairie plants (especially species of Asteraceae and Fabaceae), whereas the moths collected in the small prairie represent relatively few prairie-associated species, plus a large component of species that feed as larvae on deciduous trees that surround the prairie. This agrees with the finding of high beta diversity of moths between the sites, which reflects a high level of larval hostplant specificity in most species of Pyraloidea and Tortricidae. Based on published information plus observations made on microlepidoptera collected during the course of this study, 31 families of basal microlepidoptera were reviewed with an aim toward evaluating the likelihood of their including species that are dependent on tallgrass prairie. Of these families, 12 were evaluated as possible, and two as likely or certain, to include prairie-dependent species. In a comparison of moth diversity in light-trap samples from corn, miscanthus, switchgrass, and native prairie, alpha diversity was highest in prairie and was higher in switchgrass than in the other two biofuel crops. Moth species complements generally were similar among the biofuel crops, and prairie shared higher species complementarity with switchgrass than with corn or miscanthus. These findings suggest that large-scale conversion of land to biofuel crops may, to a substantial degree, detrimentally affect arthropod biodiversity, with a resulting loss of valuable arthropod-derived ecosystem services both within the cropping systems and in the surrounding landscape. During the course of this study, rearing efforts yielded two species of moths of the family Gelechiidae, both of which are monophagous leaf feeders on leadplant, Amorpha canescens (Fabaceae). Because these moths are restricted to tallgrass prairie, they are likely to be of interest to conservation biologists. In the interest of naming the moths to facilitate communication regarding them, and to augment our taxonomic knowledge of their respective genera, the moths are described, and diagnoses are provided to differentiate them from similar, related species.