The structure of turbulent stratified and premixed methane/air flames I: Non-swirling flows

A series of flames in a turbulent methane/air stratified swirl burner is presented. The degree of stratification and swirl are systematically varied to generate a matrix of experimental conditions, allowing their separate and combined effects to be investigated. Non-swirling flows are considered in the present paper, and the effects of swirl are considered in a companion paper (Part II). A mean equivalence ratio of φ=0.75 is used, with φ for the highest level of stratification spanning 0.375-1.125. The burner features a central bluff-body to aid flame stabilization, and the influence of the induced recirculation zone is also considered. The current work focuses on non-swirling flows where two-component particle image velocimetry (PIV) measurements are sufficient to characterize the main features of the flow field. Scalar data obtained from Rayleigh/Raman/CO laser induced fluorescence (CO-LIF) line measurements at 103μm resolution allow the behavior of key combustion species-CH 4, CO 2, CO, H 2, H 2O and O 2-to be probed within the instantaneous flame front. Simultaneous cross-planar OH-PLIF is used to determine the orientation of the instantaneous flame normal in the scalar measurement window, allowing gradients in temperature and progress variable to be angle corrected to their three dimensional values. The relationship between curvature and flame thickness is investigated using the OH-PLIF images, as well as the effect of stratification on curvature.The main findings are that the behavior of the key combustion species in temperature space is well captured on the mean by laminar flame calculations regardless of the level of stratification. H 2 and CO are significant exceptions, both appearing at elevated levels in the stratified flames. Values for surface density function and by extension thermal scalar dissipation rate are found to be substantially lower than laminar values, as the thickening of the flame due to turbulence dominates the effect of increased strain. These findings hold for both premixed and stratified flames. The current series of flames is proposed as an interesting if challenging set of test cases for existing and emerging turbulent flame models, and data are available on request. © 2012 The Combustion Institute.

A body force-based method for prediction of multiple-pure-tone noise: Validation

Emissions, fuel burn, and noise are the main drivers for innovative aircraft design. Embedded propulsion systems, such as for example used in hybrid-wing body aircraft, can offer fuel burn and noise reduction benefits but the impact of inlet flow distortion on the generation and propagation of turbomachinery noise has yet to be assessed. A novel approach is used to quantify the effects of non-uniform flow on the creation and propagation of multiple pure tone (MPT) noise. The ultimate goal is to conduct a parametric study of S-duct inlets to quantify the effects of inlet design parameters on the acoustic signature. The key challenge is that the effects of distortion transfer, noise source generation and propagation through the non-uniform flow field are inherently coupled such that a simultaneous computation of the aerodynamics and acoustics is required to capture the mechanisms at play. The technical approach is based on a body force description of the fan blade row that is able to capture the distortion transfer and the blade-to-blade flow variations that cause the MPT noise while reducing computational cost. A single, 3-D full-wheel CFD simulation, in which the Euler equations are solved to second-order spatial and temporal accuracy, simultaneously computes the MPT noise generation and its propagation in distorted inlet flow. A new method of producing the blade-to-blade variations in the body force field for MPT noise generation has been developed and validated. The numerical dissipation inherent to the solver is quantified and used to correct for non-physical attenuation in the far-field noise spectra. Source generation, acoustic propagation and acoustic energy transfer between modes is examined in detail. The new method is validated on NASA's Source Diagnostic Test fan and inlet, showing good agreement with experimental data for aerodynamic performance, acoustic source generation, and far-field noise spectra. The next steps involve the assessment of MPT noise in serpentine inlet ducts and the development of a reduced order formulation suitable for incorporation into NASA's ANOPP framework. © 2010 by Jeff Defoe, Alex Narkaj & Zoltan Spakovszky.

A novel MPT noise prediction methodology for highly-integrated propulsion systems with inlet flow distortion

Embedded propulsion systems, such as for example used in advanced hybrid-wing body aircraft, can potentially offer major fuel burn and noise reduction benefits but introduce challenges in the aerodynamic and acoustic integration of the high-bypass ratio fan system. A novel approach is proposed to quantify the effects of non-uniform flow on the generation and propagation of multiple pure tone noise (MPTs). The new method is validated on a conventional inlet geometry first. The ultimate goal is to conduct a parametric study of S-duct inlets in order to quantify the effects of inlet design parameters on the acoustic signature. The key challenge is that the mechanism underlying the distortion transfer, noise source generation and propagation through the non-uniform flow field are inherently coupled such that a simultaneous computation of the aerodynamics and acoustics is required. The technical approach is based on a body force description of the fan blade row that is able to capture the distortion transfer and the MPT noise generation mechanisms while greatly reducing computational cost. A single, 3-D full-wheel unsteady CFD simulation, in which the Euler equations are solved to second-order spatial and temporal accuracy, simultaneously computes the MPT noise generation and its propagation in distorted mean flow. Several numerical tools were developed to enable the implementation of this new approach. Parametric studies were conducted to determine appropriate grid and time step sizes for the propagation of acoustic waves. The Ffowcs-Williams and Hawkings integral method is used to propagate the noise to far field receivers. Non-reflecting boundary conditions are implemented through the use of acoustic buffer zones. The body force modeling approach is validated and proof-of-concept studies demonstrate the generation of disturbances at both blade-passing and shaft-order frequencies using the perturbed body force method. The full methodology is currently being validated using NASA's Source Diagnostic Test (SDT) fan and inlet geometry. Copyright © 2009 by Jeff Defoe, Alex Narkaj & Zoltan Spakovszky.

Numerically stable Monte Carlo-burnup-thermal hydraulic coupling schemes

This paper presents stochastic implicit coupling method intended for use in Monte-Carlo (MC) based reactor analysis systems that include burnup and thermal hydraulic (TH) feedbacks. Both feedbacks are essential for accurate modeling of advanced reactor designs and analyses of associated fuel cycles. In particular, we investigate the effect of different burnup-TH coupling schemes on the numerical stability and accuracy of coupled MC calculations. First, we present the beginning of time step method which is the most commonly used. The accuracy of this method depends on the time step length and it is only conditionally stable. This work demonstrates that even for relatively short time steps, this method can be numerically unstable. Namely, the spatial distribution of neutronic and thermal hydraulic parameters, such as nuclide densities and temperatures, exhibit oscillatory behavior. To address the numerical stability issue, new implicit stochastic methods are proposed. The methods solve the depletion and TH problems simultaneously and use under-relaxation to speed up convergence. These methods are numerically stable and accurate even for relatively large time steps and require less computation time than the existing methods. © 2013 Elsevier Ltd. All rights reserved.

Experimental investigation of antenna selection and transmit beamforming for capacity enhancement in 3×3 MIMO-enabled radio-over-fiber DAS

This paper examines the impact of two simple precoding schemes on the capacity of 3 × 3 MIMO-enabled radio-over-fiber (RoF) distributed antenna systems (DAS) with excess transmit antennas. Specifically, phase-shift-only transmit beamforming and antenna selection are compared. It is found that for two typical indoor propagation scenarios, both strategies offer double the capacity gain that non-precoding MIMO DAS offers over traditional MIMO collocated antenna systems (CAS), with capacity improvements of 3.2-4.2 bit/s/Hz. Further, antenna selection shows similar performance to phase-only beamforming, differing by <0.5% and offering median capacities of 94 bit/s/Hz and 82 bit/s/Hz in the two propagation scenarios respectively. Because optical DASs enable precise, centralized control of remote antennas, they are well suited for implementing these beamforming schemes. Antenna selection, in particular, is a simple and effective means of increasing MIMO DAS capacity. © 2013 IEEE.

Single-mode condition for silicon rib waveguides with trapezoidal cross-section

Single-mode condition for silicon rib waveguides with trapezoidal cross-section was obtained using a numerical method based on imaginary-distance beam propagation method with non-uniform discretization. Both quasi-transverse-electric and quasi-transverse-magnetic modes were investigated. Simulated single-mode condition is given by a modified equation. Comparison with reported results shows that the Marcatili's method is in a better agreement with our results. (C) 2003 Elsevier B.V. All rights reserved.

Performing Fast Addition and Multiplication by Transferring Single Electrons

This paper proposes novel fast addition and multiplication circuits that are based on non-binary redundant number systems and single electron (SE) devices. The circuits consist of MOSFET-based single-electron (SE) turnstiles. We use the number of electrons to represent discrete multiple-valued logic states and we finish arithmetic operations by controlling the number of electrons transferred. We construct a compact PD2,3 adder and a 12x12bit multiplier using the PD2,3 adder. The speed of the adder can be as high as 600MHz with 400nW power dissipation. The speed of the adder is regardless of its operand length. The proposed circuits have much smaller transistors than conventional circuits.

Thermocapillary migrations of drops and bubbles

The transport phenomenon of drops or bubbles is a very important topic in fundamental hydrodynamics research and practical applications such as material processing and the chemical engineering. In microgravity environment, if drops or bubbles stay in a continuous phase with non-uniform temperature ¯eld, they will start to move as a result of the variance of the interface tension. This kind of movement is called the Marangoni migration. This review tries to sum up the main results in this ¯eld on theoretical analysis, numerical simulations and experiments. So far the theoretical analysis is still limited to the linear or weak nonlinear steady questions, while the current numerical simulations can already obtain the time- dependent process of the bubble/drop migration when the e®ect of heat convection is small. For strong heat convection problem, or when the Marangoni number is bigger than 100, no numerical result is in consistence with those of experiments so far. Some of the lastest numerical results are shown when heat convection is strong, and the main di®erence between strong and weak heat convection is analyzed. Finally, we also discuss the main unresolved problems in this ¯eld and some possible directions in the future.

Multi-mode Vortex-induced Vibration of Slender Cable Experiencing Shear Flow

The dynamic characteristics of slender cable often present serried modes with low frequencies due to large structure flexibility resulted from high aspect ratio (ratio of length to diameter of cable), while the flow velocity distributes non-uniformly along the cable span actually in practical engineering. Therefore, the prediction of the vertex-induce vibration of slender cable suffered from multi-mode and high-mode motions becomes a challenging problem. In this paper a prediction approach based on modal energy is developed to deal with multi-mode lock-in. Then it is applied to the modified wake-oscillator model to predict the VIV displacement and stress responses of cable in non-uniform flow field. At last, illustrative examples are given of which the VIV response of flexible cable in nonlinear shear flow field is analyzed. The effects of flow velocity on VIV are explored. Our results show that both displacement and stress responses become larger as the flow velocity increasing; especially higher stress response companied with higher frequency vibration should be paid enough attention in practical design of SFT because of its remarkable influence on structure fatigue life.

PREDICTION OF VORTEX-INDUCED VIBRATION OF FLEXIBLE RISER USING AN IMPROVED WAKE-OSCILLATOR MODEL

Based on improving the wake-oscillator model, an analytical model for vortex-induced vibration (VIV) of flexible riser under non-uniform current is presented, in which the variation of added mass at lock-in and the nonlinear relationship between amplitude of response and reduced velocity are considered. By means of empirical formula combining iteration computation, the improved analytical model can be conveniently programmed into computer code with simpler and faster computation process than CFD so as to be suitable to application of practical engineering. This model is validated by comparing with experimental result and numerical simulation. Our results show that the improved model can predict VIV response and lock-in region more accurately. At last, illustrative examples are given in which the amplitude of response of flexible riser experiencing VIV under action of non-uniform current is calculated and effects of riser tension and flow distribution along span of riser are explored. It is demonstrated that with the variation of tension and flow distribution, lock-in region of mode behaves in different way, and thus the final response is a synthesis of response of locked modes.

捷安肽素对采后柑桔青绿霉菌抑制效果及作用机理研究

捷安肽素是一种由枯草芽孢杆菌（Bacillus subtilis）ZK 产生的抗真菌多肽。本文以柑桔青霉菌（Penicillium italicum）和绿霉菌（Penicillium digitaum）为供试真菌，研究了捷安肽素的抑菌性能及作用机理，为捷安肽素开发为有效的生物杀菌剂提供理论依据。全文共分两部分：第一部分：捷安肽素对柑桔青霉菌和绿霉菌抑制效果研究。采用琼脂扩散法测定捷安肽素对柑桔青霉菌和绿霉菌的抑菌活性。53.9 µg/mL 捷安肽素对绿霉菌和青霉菌的抑菌圈直径分别为26.7mm 和24.1mm。结果表明捷安肽素能够抑制柑桔青绿霉菌的生长，柑桔绿霉菌比青霉菌对捷安肽素敏感。在柑桔果实上，研究了不同浓度、不同接入时间的捷安肽素对柑桔青霉病和绿霉病的防治效果，并与常用化学杀菌剂抑霉唑、咪鲜胺、甲基硫菌灵和多菌灵作比较。53.9 µg/mL捷安肽素处理柑桔果实，柑桔青霉病和绿霉病发病率分别为5.0 %和5.3 %,比对照低95.0 %和94.7 %；柑桔青霉病和绿霉病的病情指数分别为1.87 和2.18，比对照低73.73 和97.82。结果表明，捷安肽素能够有效地防治柑桔青绿霉病。与对照相比，捷安肽素先于或后于柑桔青绿霉菌接入时，对柑桔青绿霉菌均有抑制作用，但抑制效果随接入间隔时间的增长而降低。第二部分：捷安肽素对绿霉菌作用机理研究。首先在光学显微镜和透射电镜下观察捷安肽素处理后绿霉菌菌丝表面形态结构与菌丝体内超微结构的变化。形态观察发现，捷安肽素处理24h以内，绿霉菌菌丝结构无变化。捷安肽素作用36h后，绿霉菌菌丝不规则缢缩和膨大。48h后，在绿霉菌菌丝顶端、中部、末端的多处细胞均可发生畸形的球状结构，这种畸变结构随处理的延长而增加，致使细胞成为捻珠状。处理72 h后，畸变球形细胞开始断裂离解。处理96h后，镜下几乎无完整菌丝，成单个的球状细胞，部分细胞出现破裂。而对照菌丝表面光滑，结构完整。通过透射电镜观察发现，与对照相比，捷安肽素处理后，绿霉菌细胞壁、细胞膜轮廓模糊不清，细胞质外泄。推测捷安肽素能够使绿霉菌细胞膜通透性发生改变。进一步实验利用紫外-可见分光光度计检测捷安肽素作用后绿霉菌胞外液紫外吸光度的变化，表明捷安肽素作用于绿霉菌菌丝后，细胞内蛋白质、核酸缓慢泄漏。通过Atomscan Advantage单道扫描等离子体发射光谱仪(ICP)测定捷安肽素作用后菌丝体内K+浓度的改变，结果表明捷安肽素作用于柑桔绿霉菌1h内，菌丝体内K+含量迅速下降，为对照绿霉菌K+含量的37.53 %，1 h后菌丝体内K+含量变化趋于平缓。K+的迅速泄漏，以及蛋白质、核酸的泄漏表明捷安肽素通过迅速改变绿霉菌细胞膜通透性，使绿霉菌菌丝生长受到抑制。Jiean-peptide produced by Bacillus subtilis ZK has broad-spectrumresistance to plant pathogens. In this study, we investigated the antifungal propertyand the possible antifungal mechanism of jiean-peptide against two commonphytopathogenic fungi of citrus fruits: blue molds (P. italicum) and green molds (P.digitatum).The paper involved two parts:Part 1 is the study of the antifungal property of jiean-peptide against blue moldsand green molds of citrus fruits. The in vitro inhibition effect of jiean-peptide againstblue molds and green molds was detected by agar diffusion method. The diameters ofinhibition zones of green molds and blue molds are 26.7mm and 24.1mm respectivelyby treating with 53.9 µg/mL jiean-peptide. It shows that jiean-peptide effectivelyinhibits the both phytopathogenic fungi, and it is more effective for inhibiting greenmolds than blue molds. The effectiveness of jiean-peptde to inhibit green molds andblue molds in vivo was investigated compared with four conventional fungicides thatare imazalil, prochloraz, carbendazin and methylthiophanate. The result is that the incidences of the blue mold disease and green mold disease are 5.0 % and 5.3 %, thedisease severities are 1.87 and 2.18 respectively when citrus are inoculated with 53.9µg/ml jiean-peptide. The decay incidences and disease severities were significantlyreduced by treating with jiean-peptide compared with the control. The results indicateJiean-peptide is effective for controlling blue molds and green molds on citrus. Theoptimized inoculation time was also investigated. When inoculated with jiean-peptideat 0 h, 6 h, 12 h, 24 h and 48 h before or after pathogens’ inoculation, Jiean-peptidecan suppress the occurrence of blue molds and green molds compared with the control, but the effect of later inoculation decreases compared with the inoculation at the sametime.In Part 2, we investigated the possible antifungal mechanism against greenmolds of citrus. At first, we observed the exterior morphological changes andultrastructural changes of blue molds under light microscopy (LM) and transmissionelectron microscopy (TEM). Compared with untreated control cells which aregenerally uniform in shape, the appearances of treated hyphae change obviously. Itshows that some cells of hyphae irregularly shrink or enlarge when cultured for 36h.When the treating time of jiean-peptide increases, the aberrance of the hyphaebecomes more obvious, and hyphae exhibit the moniliform appearances. Finally, thereis no intact hypha leaved except only single cells, and some of which appear fractured.By transmission electron microscopy (TEM) observation, we find that the outline ofthe cell wall and the cell membrane of hyphae are blurry, and the cytoplasma oozesout. The observation result under LM and TEM suggests that jiean-peptide mightchange the permeability of the cell membrane. So we conducted further experiment todetect the change of permeability when the cells of blue molds were treated withjiean-peptide. And the effect of jiean-peptide on non-growing cells of blue molds wastested. By the spectrophotometer measurement, we found that compounds with lightabsorption at 260 nm and 280 nm were released and amounts increased within 12 hcompared with the control. Moreover, by the ICP measurement, the leakage of K+occurred immediately in the presence of jiean-peptide within 1 h, but with nearly nofurther change after 1 h. All these results indicate that jiean-peptide could change themembrane permeability of blue molds immediately and result in leaking nucleotides,proteins and K+ from cells.

Pre-irradiation with low-dose C-12(6+) beam significantly enhances the efficacy of AdCMV-p53 gene therapy in human non-small lung cancer

The combination of ionizing radiation and gene therapy has been investigated. However, there are very few reports about the combination of heavy-ion irradiation and gene therapy. To determine if the pre-exposure to low-dose heavy ion beam enhances the suppression of AdCMV-p53 on non-small lung cancer (NSLC), the cells pre-irradiated or non-irradiated were infected with 20, 40 MOI of AdCMV-p53. Survival fraction and the relative biology effect (RBE) were determined by clonogenic assay. The results showed that the proportions of p53 positive cells in C-12(6+) beam induced AdCMV-p53 infected cells were more than 90%, which were significantly more than those in gamma-ray induced AdCMV-p53 infected cells. The pre-exposure to low-dose 12C6+ beam significantly prevented the G(0)/G(1) arrest and activated G(2)/M checkpoints. The pre-exposure to C-12(6+) beam significantly improved cell to apoptosis. RBEs for the C-12(6+)+ AdCMV-p53 infection groups were 30%-60%,20% -130% and 30%-70% more than those for the C-12(6+)_irradiated only, AdCMV-p53 infected only, and gamma-irradiation induced AdCMVp53 infected groups, respectively. The data suggested that the pre-exposure to low-dose C-12(6+) beam significantly promotes exogenous p53 expression in NSLC, and the suppression of AdCMV-p53 gene therapy on NSLC.

玉米冠层对喷灌水量的再分配

通过喷灌玉米田间试验,研究了喷灌水经玉米冠层再分配后的分布状况。结果表明:在玉米全生育期,茎秆下流水量占灌水量的均值为44%左右,棵间穿透水量占灌水量的均值为48%左右,冠层截留量在0.8￣2.9mm之间变化。一次灌水中,喷灌水在地表的分布很不均匀,43.2%的灌水量经茎秆下流到根区,在距离茎秆7cm,15cm,25cm和32.5cm处,地表接收的水量占总灌水量的比例分别为18.9%、43.5%、66.9%和84.5%。灌水量、种植密度、株高和叶面积指数等都影响着喷灌水在地表的分布。

Effect of ancillary ligands on the properties of heteroleptic green iridium dendrimers functionalized with carbazole dendrons

A series of heteroleptic green iridium dendrimers functionalized with carbazole dendrons, such as G2(pic) and G2(acac), have been synthesized, in which picolinic acid and acetylacetone are used as the ancillary ligands, respectively. Compared with the corresponding homoleptic iridium dendrimer G2 (8%), these heteroleptic ones can be prepared under mild conditions with total yields as high as 55-67%. Both the dendrimer G2(pic) and G2(acac) display bright green emissions with photoluminescence quantum yields higher than 0.80 in toluene solution. As a result, a maximum external quantum efficiency of 7.1% (21.0 cd/A) for G2(pic) and 7.7% (25.8 cd/A) for G2(acac) has been realized based on non-doped device configuration. The state-of-art performance indicates that the heteroleptic dendrimers can be promising candidates used for non-doped electrophosphorescent devices, especially when the ease of synthesis in a large scale is considered.