Toxicity measurement techniques for building materials with wastes

The innovative Horizon 2020 program sponsored by the European Union (EU) aims to promote and develop processes of waste integration in construction materials. However, several potential health hazards caused by building materials have been identified and, there-fore, there is an ongoing need to develop new recycling methods for hazardous wastes and effi-cient barriers in order to prevent toxic releases from the new construction solutions with wastes. This paper presents an overview that focus on two main aspects: the identification of the health risks related to radioactivity and heavy metals present in building materials and identification of these toxic substances in new construction solutions that contain recycled wastes. Different waste materials were selected and distinct methodologies of toxicity evaluation are presented to analyse the potential hazardous, the feasibility of using those wastes and the achievement of op-timal construction solutions involving wastes.

Variação espaço-temporal na atividade forrageira da Saúva (Atta laevigata)

Na Amazônia, a regeneração natural da floresta em pastos e cultivos abandonados pode ser afetada pelas saúvas, pois estas são importantes predadoras das plântulas e das sementes das espécies arbóreas que eventualmente ali se estabelecem. Entretanto, pouco se sabe sobre como as chances de uma dada planta ser atacada ou de uma semente ser removida pelas saúvas varia no tempo e no espaço. Com este intuito, estabeleci uma parcela de 80 χ 120 m, subdividida em quadrantes de 10 χ 10m, em um campo abandonado próximo a Manaus. Na periferia desta parcela haviam 3 ninhos da saúva Atta laevigata. Ao longo de 1 ano, determinei quais plantas (das espécies arbóreas somente) foram atacadas pelas formigas. Determinei também como variou a atividade de coleta de sementes por A. laevigata. Para isto utilizei grãos de feijão (Phaseolus vulgaris). Iscas, com cerca de 20 feijões cada, foram distribuídas pela parcela ao longo do ano. Finalmente, determinei se plantas (mudas de Bellucia imperialis) estabelecidas em solo desnudo tinham uma maior chance de serem atacadas do que aquelas estabelecidas em solo com cobertura de gramíneas. Os resultados mostram que a atividade de coleta de sementes foi espacialmente agregada. A maior atividade foi observada nas regiões sudeste e noroeste da parcela, em geral, próximo aos ninhos. Forte variação temporal na coleta de sementes também foi observada. O pico máximo de atividade ocorreu em meados de julho e o de menor atividade em meados de janeiro. A atividade de corte seguiu um padrão similar. Houve uma clara diminuição no número de plantas atacadas entre novembro e janeiro. A proporção de plantas atacadas por parcela variou entre 6 e 89%. A incidência de ataques por saúvas sobre mudas de B. imperialis não variou em função da cobertura vegetal (com ou sem gramíneas). Isto possivelmente em função da forte heterogeneidade espacial na atividade de A. laevigata, que encobriu qualquer efeito devido a cobertura vegetal.

Variação temporal de nutrientes na água escorrida pelo caule em floresta primária explorada no nordeste do Pará

Foi enfocada a contribuição de nutrientes da água escorrida pelo caule (CE), na ciclagem hidroquímica em floresta primária explorada, em Benevides, PA. A concentração de nutrientes na CE foi avaliada de dezembro de 1993 a abril de 1995, mediante coletores tipo colarinho, construídos com espuma de silicone, acoplados por tubos a recipientes plásticos. O monitoramento de CE se restringiu a doze árvores, nas quais foram coletadas mensalmente amostras para análise química de K+, Na+, Ca2+ e Mg2+ por espectrofotometria de absorção atômica, o N-NH4+, N-NO3 - e P-PO4 3- por colorimetria, em espectofotômetro de fluxo contínuo, o N-total por micro Kjeldahl e pH por potenciometria. A quantidade de nutrientes trazidos pela CE foi maior no início da época chuvosa, exibindo marcante variabilidade temporal para K+, Na+, Ca2+, Mg2+, N-total, SO4 2-, enquanto que o oposto aconteceu com PO4 3-. A magnitude na concentração dos nutrientes decresceu na seguinte ordem: K+ > Na+ > Ca2+ > N-t > SO4 2- > Mg2+ > PO4 3-. A distribuição e a intensidade de chuva não influenciam marcantemente o pH na CE.

Ancient materials and techniques to improve the earthen building durability

A substantial part of the world building heritage has been performed by earthen building. The durability of this existing heritage and mainly of the new buildings built with earth is particularly conditioned by the erosion caused by water action, especially in countries with high levels of rainfall. This research aims to contribute to the increase of knowledge about the ancient building techniques that provide enhanced durability. It is possible to analyse the ancestral practices used to protect the earth material from the water action in order to understand how the old earthen buildings were preserved over the centuries, resisting to harsh weather conditions. Among these techniques are: the incorporation of biopolymers (such as oils or fats from animal or vegetable origin); the addition of some minerals; and the earth stabilization with lime. However, this knowledge seems to be forgotten, probably due to the prejudice related to earthen constructions, which several times are associated with a poor building. This research also focuses on the study of new methods of earth stabilization with lime and biopolymers, adapting the ancient knowledge to improve the durability related to the water action. Therefore, alternative solutions can be obtained to improve the performance of earthen buildings, mainly the resistance of the material in the presence of water, reducing its permeability to water. In addition, with the proposed solutions it is possible to obtain good levels of water vapour permeability, one of the major advantages of the construction with earth.

MixAR mobile prototype: visualizing virtually reconstructed ancient structures in situ

Archeology and related areas have a special interest on cultural heritage sites since they provide valuable information about past civilizations. However, the ancient buildings present in these sites are commonly found in an advanced state of degradation which difficult the professional/expert analysis. Virtual reconstructions of such buildings aim to provide a digital insight of how these historical places could have been in ancient times. Moreover, the visualization of such models has been explored by some Augmented Reality (AR) systems capable of providing support to experts. Their compelling and appealing environments have also been applied to promote the social and cultural participation of general public. The existing AR solutions regarding this thematic rarely explore the potential of realism, due to the following lacks: the exploration of mixed environments is usually only supported for indoors or outdoors, not both in the same system; the adaptation of the illumination conditions to the reconstructed structures is rarely addressed causing a decrease of credibility. MixAR [1] is a system concerned with those challenges, aiming to provide the visualization of virtual buildings augmented upon real ruins, allowing soft transitions among its interiors and exteriors and using relighting techniques for a faithful interior illumination, while the user freely moves in a given cultural heritage site, carrying a mobile unit. Regarding the focus of this paper, we intend to report the current state of MixAR mobile unit prototype, which allows visualizing virtual buildings – properly aligned with real-world structures – based on user's location, during outdoor navigation. In order to evaluate the prototype performance, a set of tests were made using virtual models with different complexities.

Implementation and comparison of different switching techniques for shunt active power filters

This paper presents a comparison between three switching techniques that can be used in three-phase four-wire Shunt Active Power Filters (SAPFs). The implemented switching techniques are: Periodic-Sampling (PS), Triangular Carrier Pulse-Width Modulation (TC-PWM) and Space Vector PWM (SVPWM). The comparison between them is made in terms of the compensated currents THD%, implementation complexity, necessary CPU time and SAPF efficiency. To perform this comparison are presented and analyzed several experimental results, obtained with a 20 kVA Shunt Active Power Filter prototype, specially developed for this purpose. The control system of the developed SAPF is based in the p-q Theory with a grid synchronization algorithm p-PLL.

Variação espacial e temporal da precipitação no Estado do Pará

Estudos sobre a climatologia das precipitações no Estado do Pará são essenciais para o planejamento das atividades agrícolas. A variação da precipitação anual e sazonal no Estado do Pará foi analisada com base em séries históricas de 23 anos (1976-1998) de dados diários de chuva. A análise foi realizada para 31 localidades do Estado do Pará, sendo os resultados representados em mapas com a utilização de técnicas de sistemas de informações geográficas (SIG). A variabilidade da precipitação anual e sazonal foi caracterizada com base no coeficiente de variação e no índice de variabilidade interanual relativo. A variação desses coeficientes para a precipitação anual no Estado do Pará foi de 15 a 30%. As características mensais da estação chuvosa, em termos de início, fim e duração, foram determinadas utilizando-se o critério proposto por KASSAM (1979). A variação entre as datas de plantio precoces e tardias corresponderam aos decêndios identificados pelos dias julianos 309319 e 353363, respectivamente.

Refinement and variability techniques in model transformation of software requirements

Tese de Doutoramento em Tecnologias e Sistemas de Informação

Rockburst laboratory tests database - Application of data mining techniques

Rockburst is characterized by a violent explosion of a block causing a sudden rupture in the rock and is quite common in deep tunnels. It is critical to understand the phenomenon of rockburst, focusing on the patterns of occurrence so these events can be avoided and/or managed saving costs and possibly lives. The failure mechanism of rockburst needs to be better understood. Laboratory experiments are undergoing at the Laboratory for Geomechanics and Deep Underground Engineering (SKLGDUE) of Beijing and the system is described. A large number of rockburst tests were performed and their information collected, stored in a database and analyzed. Data Mining (DM) techniques were applied to the database in order to develop predictive models for the rockburst maximum stress (σRB) and rockburst risk index (IRB) that need the results of such tests to be determined. With the developed models it is possible to predict these parameters with high accuracy levels using data from the rock mass and specific project.

Temporal analysis of CHAVE collection

Lecture Notes in Computer Science, 9309

Global vs. local nonlinear optimization techniques for human-like movement of an anthropomorphic robot

In this paper a comparison between using global and local optimization techniques for solving the problem of generating human-like arm and hand movements for an anthropomorphic dual arm robot is made. Although the objective function involved in each optimization problem is convex, there is no evidence that the admissible regions of these problems are convex sets. For the sequence of movements for which the numerical tests were done there were no significant differences between the optimal solutions obtained using the global and the local techniques. This suggests that the optimal solution obtained using the local solver is indeed a global solution.

Lean Production e Ergonomia: o impacto de estratégias implementadas nas condições de trabalho numa indústria de componentes para automóveis

Dissertação de mestrado em Engenharia Humana

Pinnularia (Bacillariophyta) do curso inferior do rio Negro, Amazonas, Brasil: taxonomia e distribuição temporal

Este estudo relata a taxonomia e distribuição temporal do gênero Pinnularia ocorrente no curso inferior do rio Negro (03º02'46,5"S e 60º15'13,1"W) ao longo de um ciclo anual. O trabalho foi conduzido a partir da análise de amostras coletadas na coluna d'água, em escala mensal, entre os meses de outubro de 2002 a setembro de 2003. As espécies foram descritas e comentadas com base na sua morfologia e morfometria. Onze espécies e quatro variedades foram identificadas, ilustradas e incluídas em chave taxonômica. Dois táxons registrados neste estudo, P. sterrenburgii var. sterrenburgii Metzeltin & Lange-Bertalot e P. subgibba var. capitata Metzeltin & Krammer, constituem primeira citação de ocorrência para o rio Negro. Temporalmente, a maior riqueza de espécies ocorreu entre os meses de outubro a dezembro de 2002, período de águas baixas, quando houve provavelmente maior interação entre água e sedimento possibilitando aporte de indivíduos da região bentônica. Considerando a ocorrência dos táxons ao longo do estudo, somente P. confirma foi considerada frequente, estando presente em mais de 50% das amostras analisadas.

Exploração de séries temporais em processos de previsão de vendas

Dissertação de mestrado em Engenharia de Sistemas

Accuracy comparison of implant impression techniques: A systematic review

Background Several studies link the seamless fit of implant-supported prosthesis with the accuracy of the dental impression technique obtained during acquisition. In addition, factors such as implant angulation and coping shape contribute to implant misfit. Purpose To identify the most accurate impression technique and factors affecting the impression accuracy. Material and Methods A systematic review of peer-reviewed literature was conducted analyzing articles published between 2009 and 2013. The following search terms were used: implant impression, impression accuracy, and implant misfit. A total of 417 articles was identified, 32 were selected for review. Results All 32 selected studies refer to in vitro studies. Fourteen articles compare open and closed impression technique, 8 advocate the open technique and 6 report similar results. Other 14 articles evaluate splinted and non-splinted techniques; all advocating the splinted technique. Polyether material usage was reported in 9; 6 studies tested vinyl polysiloane and 1 study used irreversible hydrocolloid. Eight studies evaluated different copings designs. Intra-oral optical devices were compared in 4 studies. Conclusions The most accurate results were achieved with two configurations: (1) the optical intra-oral system with powder; and (2) the open technique with splinted squared transfer copings, using polyether as impression material.