Estimation methods of non-additive effects for characteristics of weight and scrotal circumference in crossbred beef cattle

The objective of this study was to investigate, in a population of crossbred cattle, the obtainment of the non-additive genetic effects for the characteristics weight at 205 and 390 days and scrotal circumference, and to evaluate the consideration of these effects in the prediction of breeding values of sires using different estimation methodologies. In method 1, the data were pre-adjusted for the non-additive effects obtained by least squares means method in a model that considered the direct additive, maternal and non-additive fixed genetic effects, the direct and total maternal heterozygosities, and epistasis. In method 2, the non-additive effects were considered covariates in genetic model. Genetic values for adjusted and non-adjusted data were predicted considering additive direct and maternal effects, and for weight at 205 days, also the permanent environmental effect, as random effects in the model. The breeding values of the categories of sires considered for the weight characteristic at 205 days were organized in files, in order to verify alterations in the magnitude of the predictions and ranking of animals in the two methods of correction data for the non-additives effects. The non-additive effects were not similar in magnitude and direction in the two estimation methods used, nor for the characteristics evaluated. Pearson and Spearman correlations between breeding values were higher than 0.94, and the use of different methods does not imply changes in the selection of animals.

Size distributions and temporal variations of biological aerosol particles in the Amazon rainforest characterized by microscopy and real-time UV-APS fluorescence techniques during AMAZE-08

As a part of the AMAZE-08 campaign during the wet season in the rainforest of central Amazonia, an ultraviolet aerodynamic particle sizer (UV-APS) was operated for continuous measurements of fluorescent biological aerosol particles (FBAP). In the coarse particle size range (> 1 mu m) the campaign median and quartiles of FBAP number and mass concentration were 7.3x10(4) m(-3) (4.0-13.2x10(4) m(-3)) and 0.72 mu g m(-3) (0.42-1.19 mu g m(-3)), respectively, accounting for 24% (11-41%) of total particle number and 47% (25-65%) of total particle mass. During the five-week campaign in February-March 2008 the concentration of coarse-mode Saharan dust particles was highly variable. In contrast, FBAP concentrations remained fairly constant over the course of weeks and had a consistent daily pattern, peaking several hours before sunrise, suggesting observed FBAP was dominated by nocturnal spore emission. This conclusion was supported by the consistent FBAP number size distribution peaking at 2.3 mu m, also attributed to fungal spores and mixed biological particles by scanning electron microscopy (SEM), light microscopy and biochemical staining. A second primary biological aerosol particle (PBAP) mode between 0.5 and 1.0 mu m was also observed by SEM, but exhibited little fluorescence and no true fungal staining. This mode may have consisted of single bacterial cells, brochosomes, various fragments of biological material, and small Chromalveolata (Chromista) spores. Particles liquid-coated with mixed organic-inorganic material constituted a large fraction of observations, and these coatings contained salts likely from primary biological origin. We provide key support for the suggestion that real-time laser-induce fluorescence (LIF) techniques using 355 nm excitation provide size-resolved concentrations of FBAP as a lower limit for the atmospheric abundance of biological particles in a pristine environment. We also show some limitations of using the instrument for ambient monitoring of weakly fluorescent particles < 2 mu m. Our measurements confirm that primary biological particles, fungal spores in particular, are an important fraction of supermicron aerosol in the Amazon and that may contribute significantly to hydrological cycling, especially when coated by mixed inorganic material.

Associação entre sistema de incentivos gerenciais e práticas de contabilidade gerencial

O princípio da controlabilidade prevê que os gestores deveriam ser avaliados com base em fatores controláveis. Consequentemente, os incentivos gerenciais estariam relacionados a práticas de contabilidade gerencial capazes de evitar que os gestores sejam responsabilizados por resultados financeiros além do controle gerencial, tais como análise por centro de responsabilidade, custo padrão, preço de transferência, orçamento e avaliação de desempenho. Este artigo desenvolve um estudo de campo para investigar se há relação entre a presença de incentivos gerenciais e as práticas de contabilidade gerencial associadas ao princípio da controlabilidade. Entrevistas in loco foram realizadas para a coleta de dados em nível organizacional e testes estatísticos não paramétricos foram utilizados para a análise dos dados. Entre as práticas de contabilidade gerencial examinadas, os resultados sugerem que apenas orçamento anual, análise por centro de responsabilidade e avaliação de desempenho estão associados à presença de sistemas de incentivos nas empresas entrevistadas.

Associação entre sistema de incentivos gerenciais e práticas de contabilidade gerencial

O princípio da controlabilidade prevê que os gestores deveriam ser avaliados com base em fatores controláveis. Consequentemente, os incentivos gerenciais estariam relacionados a práticas de contabilidade gerencial capazes de evitar que os gestores sejam responsabilizados por resultados financeiros além do controle gerencial, tais como análise por centro de responsabilidade, custo padrão, preço de transferência, orçamento e avaliação de desempenho. Este artigo desenvolve um estudo de campo para investigar se há relação entre a presença de incentivos gerenciais e as práticas de contabilidade gerencial associadas ao princípio da controlabilidade. Entrevistas in loco foram realizadas para a coleta de dados em nível organizacional e testes estatísticos não paramétricos foram utilizados para a análise dos dados. Entre as práticas de contabilidade gerencial examinadas, os resultados sugerem que apenas orçamento anual, análise por centro de responsabilidade e avaliação de desempenho estão associados à presença de sistemas de incentivos nas empresas entrevistadas.

Desempenho dos municípios paulistas: uma avaliação de eficiência da atenção básica à saúde

Neste trabalho, teve-se por objetivo construir uma metodologia de avaliação de desempenho dos municípios paulistas quanto à eficiência técnica na aplicação de recursos públicos nas ações de atenção básica à saúde e analisar a influência de variáveis não controláveis no processo de produção em tal área. A eficiência técnica é um dos parâmetros de avaliação de desempenho dos gestores públicos, refletindo a capacidade de uma entidade obter máximos outputs com o menor consumo de inputs. O alcance de tal métrica pode ser prejudicado ou favorecido pelas variáveis ambientais ou não controláveis que, se não forem consideradas na avaliação de desempenho, podem gerar vieses. Nesse sentido, por meio da metodologia Data Envelopment Analysis (DEA) em dois estágios, os escores de eficiência dos municípios foram estimados e depois ajustados com o uso da análise de regressão. Os resultados indicaram que seria possível aumentar, consideravelmente, a quantidade de serviços prestados à população sem a necessidade de novas dotações orçamentárias na maioria dos municípios. Além disso, verificou-se que a maior proporção de idosos em uma jurisdição torna a prestação de serviços mais cara; por sua vez, maiores densidade populacional, grau de urbanização e escala dos estabelecimentos de saúde favorecem o gasto público com eficiência. Os cinco municípios paulistas considerados mais eficientes foram Tuiuti, Nova Guataporanga, Sabino, Lins e Santos.

Análise da relação entre estrutura e desempenho de redes interorganizacionais colaborativas

Cada vez mais, as empresas têm percebido as vantagens de estabelecerem alianças umas com as outras, formando redes. Essas vantagens podem estar ligadas aos mais variados objetivos, que são mensurados por diferentes indicadores de desempenho. A presente pesquisa teve como objetivo a determinação das características estruturais que são mais adequadas, considerando uma série de possíveis indicadores de desempenho, para uma rede interorganizacional colaborativa. Para tal, foi realizado um levantamento bibliográfico-exploratório em duas bases de dados, e utilizada uma abordagem qualitativa para sistematizar as informações encontradas. Como principal resultado deste trabalho, foi construído um quadro teórico que sistematiza a relação entre a estrutura e o desempenho de uma rede. Acredita-se que este artigo possa servir como uma contribuição inicial para um campo de pesquisa ainda pouco explorado.

Wireless systems for the fourth generation

Today, third generation networks are consolidated realities, and user expectations on new applications and services are becoming higher and higher. Therefore, new systems and technologies are necessary to move towards the market needs and the user requirements. This has driven the development of fourth generation networks. ”Wireless network for the fourth generation” is the expression used to describe the next step in wireless communications. There is no formal definition for what these fourth generation networks are; however, we can say that the next generation networks will be based on the coexistence of heterogeneous networks, on the integration with the existing radio access network (e.g. GPRS, UMTS, WIFI, ...) and, in particular, on new emerging architectures that are obtaining more and more relevance, as Wireless Ad Hoc and Sensor Networks (WASN). Thanks to their characteristics, fourth generation wireless systems will be able to offer custom-made solutions and applications personalized according to the user requirements; they will offer all types of services at an affordable cost, and solutions characterized by flexibility, scalability and reconfigurability. This PhD’s work has been focused on WASNs, autoconfiguring networks which are not based on a fixed infrastructure, but are characterized by being infrastructure less, where devices have to automatically generate the network in the initial phase, and maintain it through reconfiguration procedures (if nodes’ mobility, or energy drain, etc..., cause disconnections). The main part of the PhD activity has been focused on an analytical study on connectivity models for wireless ad hoc and sensor networks, nevertheless a small part of my work was experimental. Anyway, both the theoretical and experimental activities have had a common aim, related to the performance evaluation of WASNs. Concerning the theoretical analysis, the objective of the connectivity studies has been the evaluation of models for the interference estimation. This is due to the fact that interference is the most important performance degradation cause in WASNs. As a consequence, is very important to find an accurate model that allows its investigation, and I’ve tried to obtain a model the most realistic and general as possible, in particular for the evaluation of the interference coming from bounded interfering areas (i.e. a WiFi hot spot, a wireless covered research laboratory, ...). On the other hand, the experimental activity has led to Throughput and Packet Error Rare measurements on a real IEEE802.15.4 Wireless Sensor Network.

Biomechanics of sprint running: a methodological contribution

Sports biomechanics describes human movement from a performance enhancement and an injury reduction perspective. In this respect, the purpose of sports scientists is to support coaches and physicians with reliable information about athletes’ technique. The lack of methods allowing for in-field athlete evaluation as well as for accurate joint force estimates represents, to date, the main limitation to this purpose. The investigations illustrated in the present thesis aimed at providing a contribution towards the development of the above mentioned methods. Two complementary approaches were adopted: a Low Resolution Approach – related to performance assessment – where the use of wearable inertial measurement units is exploited during different phases of sprint running, and a High Resolution Approach – related to joint kinetics estimate for injury prevention – where subject-specific, non-rigid constraints for knee joint kinematic modelling used in multi-body optimization techniques are defined. Results obtained using the Low Resolution Approach indicated that, due to their portability and inexpensiveness, inertial measurement systems are a valid alternative to laboratory-based instrumentation for in-field performance evaluation of sprint running. Using acceleration and angular velocity data, the following quantities were estimated: trunk inclination and angular velocity, instantaneous horizontal velocity and displacement of a point approximating the centre of mass, and stride and support phase durations. As concerns the High Resolution Approach, results indicated that the length of the anterior cruciate and lateral collateral ligaments decreased, while that of the deep bundle of the medial collateral ligament increased significantly during flexion. Variations of the posterior cruciate and the superficial bundle of the medial collateral ligament lengths were concealed by the experimental indeterminacy. A mathematical model was provided that allowed the estimate of subject-specific ligament lengths as a function of knee flexion and that can be integrated in a multi-body optimization procedure.

Data dissemination on overlay networks through gossip

Gossip protocols have been analyzed as a feasible solution for data dissemination on peer-to-peer networks. In this thesis, a new data dissemination protocol is proposed and compared with other known gossip mechanisms. Performance evaluation is based on simulation.

Wireless Networks for Body-Centric Communications

Progress in miniaturization of electronic components and design of wireless systems paved the way towards ubiquitous and pervasive communications, enabling anywhere and anytime connectivity. Wireless devices present on, inside, around the human body are becoming commonly used, leading to the class of body-centric communications. The presence of the body with all its peculiar characteristics has to be properly taken into account in the development and design of wireless networks in this context. This thesis addresses various aspects of body-centric communications, with the aim of investigating network performance achievable in different scenarios. The main original contributions pertain to the performance evaluation for Wireless Body Area Networks (WBANs) at the Medium Access Control layer: the application of Link Adaptation to these networks is proposed, Carrier Sense Multiple Access with Collision Avoidance algorithms used for WBAN are extensively investigated, coexistence with other wireless systems is examined. Then, an analytical model for interference in wireless access network is developed, which can be applied to the study of communication between devices located on humans and fixed nodes of an external infrastructure. Finally, results on experimental activities regarding the investigation of human mobility and sociality are presented.

A parallel community detection algorithm

Complex networks analysis is a very popular topic in computer science. Unfortunately this networks, extracted from different contexts, are usually very large and the analysis may be very complicated: computation of metrics on these structures could be very complex. Among all metrics we analyse the extraction of subnetworks called communities: they are groups of nodes that probably play the same role within the whole structure. Communities extraction is an interesting operation in many different fields (biology, economics,...). In this work we present a parallel community detection algorithm that can operate on networks with huge number of nodes and edges. After an introduction to graph theory and high performance computing, we will explain our design strategies and our implementation. Then, we will show some performance evaluation made on a distributed memory architectures i.e. the supercomputer IBM-BlueGene/Q "Fermi" at the CINECA supercomputing center, Italy, and we will comment our results.

Valutazione delle prestazioni termo-idrauliche di microcanali a spigoli smussati

In questo eleborato viene presentato uno studio focalizzato sull’ottimizzazione della geometria dei microcanali di un dissipatore di calore, con lo scopo di fornire una serie di relazioni operative e quindi direttamente utilizzabili per la progettazione di tali dispositivi. Alla definizione delle tradizionali funzioni obiettivo, legate ai Performance Evaluation Criteria (PEC), è stata aggiunta un’analisi dal punto di vista del secondo principio della termodinamica, per valutare l’entropia generata da un flusso fluido in un canale. Normalizzando l’entropia generata si è passati all’utilizzo di un numero di generazione entropica adimensionale e quindi più adatto alla valutazione delle prestazioni. Dopo una prima fase di analisi dal punto di vista fisico, il modello è stato applicato a casi concreti, in cui funzione obiettivo e numero di generazione entropica sono stati espressi in dipendenza dell’incognita geometrica da valutare. Inoltre, è stato approfondito anche il caso in cui non siano trascurabili gli effetti di dissipazione viscosa, che possono effettivamente incidere in modo determinante sullo scambio termico, soprattutto alle microscale.

From Radio Channel Modeling to a System Level Perspective in Body-Centric Communications

Body-centric communications are emerging as a new paradigm in the panorama of personal communications. Being concerned with human behaviour, they are suitable for a wide variety of applications. The advances in the miniaturization of portable devices to be placed on or around the body, foster the diffusion of these systems, where the human body is the key element defining communication characteristics. This thesis investigates the human impact on body-centric communications under its distinctive aspects. First of all, the unique propagation environment defined by the body is described through a scenario-based channel modeling approach, according to the communication scenario considered, i.e., on- or on- to off-body. The novelty introduced pertains to the description of radio channel features accounting for multiple sources of variability at the same time. Secondly, the importance of a proper channel characterisation is shown integrating the on-body channel model in a system level simulator, allowing a more realistic comparison of different Physical and Medium Access Control layer solutions. Finally, the structure of a comprehensive simulation framework for system performance evaluation is proposed. It aims at merging in one tool, mobility and social features typical of the human being, together with the propagation aspects, in a scenario where multiple users interact sharing space and resources.

Methodologies for Synthesizable Programmable Devices based on Multi-Stage Switching Networks

Nowadays the rise of non-recurring engineering (NRE) costs associated with complexity is becoming a major factor in SoC design, limiting both scaling opportunities and the flexibility advantages offered by the integration of complex computational units. The introduction of embedded programmable elements can represent an appealing solution, able both to guarantee the desired flexibility and upgradabilty and to widen the SoC market. In particular embedded FPGA (eFPGA) cores can provide bit-level optimization for those applications which benefits from synthesis, paying on the other side in terms of performance penalties and area overhead with respect to standard cell ASIC implementations. In this scenario this thesis proposes a design methodology for a synthesizable programmable device designed to be embedded in a SoC. A soft-core embedded FPGA (eFPGA) is hence presented and analyzed in terms of the opportunities given by a fully synthesizable approach, following an implementation flow based on Standard-Cell methodology. A key point of the proposed eFPGA template is that it adopts a Multi-Stage Switching Network (MSSN) as the foundation of the programmable interconnects, since it can be efficiently synthesized and optimized through a standard cell based implementation flow, ensuring at the same time an intrinsic congestion-free network topology. The evaluation of the flexibility potentialities of the eFPGA has been performed using different technology libraries (STMicroelectronics CMOS 65nm and BCD9s 0.11μm) through a design space exploration in terms of area-speed-leakage tradeoffs, enabled by the full synthesizability of the template. Since the most relevant disadvantage of the adopted soft approach, compared to a hardcore, is represented by a performance overhead increase, the eFPGA analysis has been made targeting small area budgets. The generation of the configuration bitstream has been obtained thanks to the implementation of a custom CAD flow environment, and has allowed functional verification and performance evaluation through an application-aware analysis.

Groupme: city data and multi-preference activity allocation

Classic group recommender systems focus on providing suggestions for a fixed group of people. Our work tries to give an inside look at design- ing a new recommender system that is capable of making suggestions for a sequence of activities, dividing people in subgroups, in order to boost over- all group satisfaction. However, this idea increases problem complexity in more dimensions and creates great challenge to the algorithm’s performance. To understand the e↵ectiveness, due to the enhanced complexity and pre- cise problem solving, we implemented an experimental system from data collected from a variety of web services concerning the city of Paris. The sys- tem recommends activities to a group of users from two di↵erent approaches: Local Search and Constraint Programming. The general results show that the number of subgroups can significantly influence the Constraint Program- ming Approaches’s computational time and e�cacy. Generally, Local Search can find results much quicker than Constraint Programming. Over a lengthy period of time, Local Search performs better than Constraint Programming, with similar final results.