ROBOT CEMAR: identificación de las capacidades emprendedoras de sus creadores

El XXI Congreso Latinoamericano sobre Espíritu Empresarial, se realizó en la Universidad Icesi los días 6, 7 y 8 de abril de 2011.

Navegación de un robot móvil sobre terreno irregular con contacto de su brazo con el suelo

En esta tesis se aborda el problema de la navegabilidad de robots móviles sobre terrenos irregulares, los cuales poseen diferentes inclinaciones y variedad de obstáculos. Este tema constituye actualmente una línea de investigación activa dirigida al desarrollo de nuevos robots y, adicionalmente, enfocada al desarrollo de estrategias de navegación eficientes y con el mínimo riesgo de inutilización. En primer lugar se desarrolló el robot móvil Lázaro para navegar en este tipo de terrenos, el cual posee un brazo articulado con una rueda como efector final. Esta rueda le permite al brazo mantener un punto de contacto adicional con el suelo que puede ayudar al robot a compensar situaciones de inestabilidad y sobrepasar algunos obstáculos que pudieran presentarse en estos entornos. Posteriormente, se desarrollaron tres medidas cuantitativas que permiten evaluar la navegabilidad de cualquier robot móvil cuando transita sobre terreno irregular. Estas tres medidas son: un índice de estabilidad, el cual evalúa la propensión al vuelco; un índice de direccionamiento, el cual evalúa la disponibilidad del robot para direccionarse y seguir una trayectoria dada y, por último, un índice de deslizamiento, el cual evalúa la propensión del robot a deslizarse hacia abajo cuando se desplaza sobre superficies inclinadas. Finalmente, se definieron un conjunto de maniobras que puede ejecutar Lázaro y que están dirigidas a garantizar la navegación cuando el robot se desplaza sobre superficies inclinadas o cuando debe sobrepasar obstáculos tales como escalones, rampas o zanjas. Todas las estrategias diseñadas se fundamentan en el uso del brazo como herramienta adicional que posee el robot para mejorar su navegabilidad.

TORP: The Open Robot Project A Framework for Module-Based Robots

The development of robots has shown itself as a very complex interdisciplinary research field. The predominant procedure for these developments in the last decades is based on the assumption that each robot is a fully personalized project, with the direct embedding of hardware and software technologies in robot parts with no level of abstraction. Although this methodology has brought countless benefits to the robotics research, on the other hand, it has imposed major drawbacks: (i) the difficulty to reuse hardware and software parts in new robots or new versions; (ii) the difficulty to compare performance of different robots parts; and (iii) the difficulty to adapt development needs-in hardware and software levels-to local groups expertise. Large advances might be reached, for example, if physical parts of a robot could be reused in a different robot constructed with other technologies by other researcher or group. This paper proposes a framework for robots, TORP (The Open Robot Project), that aims to put forward a standardization in all dimensions (electrical, mechanical and computational) of a robot shared development model. This architecture is based on the dissociation between the robot and its parts, and between the robot parts and their technologies. In this paper, the first specification for a TORP family and the first humanoid robot constructed following the TORP specification set are presented, as well as the advances proposed for their improvement.

Mimicking the behaviour of idiotypic AIS robot controllers using probabilistic systems

Previous work has shown that robot navigation systems that employ an architecture based upon the idiotypic network theory of the immune system have an advantage over control techniques that rely on reinforcement learning only. This is thought to be a result of intelligent behaviour selection on the part of the idiotypic robot. In this paper an attempt is made to imitate idiotypic dynamics by creating controllers that use reinforcement with a number of different probabilistic schemes to select robot behaviour. The aims are to show that the idiotypic system is not merely performing some kind of periodic random behaviour selection, and to try to gain further insight into the processes that govern the idiotypic mechanism. Trials are carried out using simulated Pioneer robots that undertake navigation exercises. Results show that a scheme that boosts the probability of selecting highly-ranked alternative behaviours to 50% during stall conditions comes closest to achieving the properties of the idiotypic system, but remains unable to match it in terms of all round performance.

Simulador cinemático de un robot manipulador industrial

Este trabajo fin de grado trata sobre la implementación de un simulador cinemático de un robot manipulador industrial, orientado al aprendizaje de los principios de programación y desarrollado mediante la herramienta de software matemático MATLAB, dicho simulador debe tener como características principales ser capaz de emular las características de programación que incorporan los lenguajes a nivel robot y resultar fácilmente accesible a los alumnos de las ingenierías. Asimismo, el simulador tendrá la capacidad de definir los objetos que integran el entorno físico que rodean al robot con el objeto de simular la interacción cinemática del brazo manipulador con dicho entorno. Para ello, primero se realizará un estudio de los lenguajes de nivel robot, en este caso concreto V+, con el objeto de elaborar un catálogo de funciones y estructuras relevantes, concretamente se trataran las estructuras de datos, funciones del robot, etc. A partir de estos, se elaborarán las especificaciones que debe cumplir el simulador cinemático. Por último se realizarán unas prácticas sobre el simulador orientadas al aprendizaje y elaboración de los manuales de usuario del mismo.

Construcción de un prototipo de robot sembrador de maíz Agrobot II

64 p.

CLARK - Smart Clinic Assistant Robot for CGA

En esta presentación se exponen la arquitectura general y el estado actual de desarrollo del sistema CLARK. Dicho sistema tiene como objetivo el despliegue de un asistente robótico para ayudar a un médico en la realización de procedimientos CGA (Comprehensive Geriatric Assessment), de forma que ciertas tareas, tales como la realización de cuestionarios o pruebas de movimiento, puedan ser realizadas por el robot de forma paralela al resto del procedimiento CGA, aumentando así su eficiencia.

Robot acuático hidrostático espectral de rayos laser, para el control larvario de mosquitos de importancia médica en Salud Pública.

Diseñar y construir un robot acuático que destruya la presencia de larvas o pupas de mosquitos en contenedores de agua. Se construyó y se diseñó un robot con materiales reciclables construido con tubos de cañería PVC, lupa, sensores de luz y barrera, motor de fuente 110 v, resistencias, LCR, cargador 9 v y focos led, para que destruya larvas de mosquitos en un contenedor de agua. Como resultado hay una cero prevalencia de índice larvario porque el robot detecta presencia larvaria con sensores y rayos laser activándose automáticamente con el efecto de succión y destrucción larvas en su interior eliminándolas desechas al utilizar filtros de 10 micras y aspas metálicas, el robot se activa por cinco a diez minutos y se apaga automáticamente hasta esperar la alarma otra vez según disposición de larvas. Conclusión el uso del robot acuático en contenedores de agua no se encuentra índices larvarios, así como pupas, que puede ser utilizado como control antilarvario para el combate transmisor de Dengue, Zika, Chikungunya entre otros.
Design and build an aquatic robot to destroy the presence of larvae or pupae of mosquitoes in water containers. It was built and a robot with recyclables built with tubes pipe PVC, magnifier, light sensors and barrier, engine power 110 v, resistors, LCR, charger 9 vy spotlights led, to destroy mosquito larvae was designed in a container of water. As a result there is a zero prevalence Larval rate because the robot detects larval presence sensors and lasers automatically activated with the suction effect and larvae destruction their killing the inner cast off using filters of 10 microns and metal blades, the robot is activated by five to ten minutes to wait automatically turns off the alarm again available as larvae. Conclusion use water in water containers robot is not larval indices and pupae, which can be used as anti larval control for transmitter combat Dengue, Zika, Chikungunya among others.

ViDRILO: The Visual and Depth Robot Indoor Localization with Objects information dataset

In this article we describe a semantic localization dataset for indoor environments named ViDRILO. The dataset provides five sequences of frames acquired with a mobile robot in two similar office buildings under different lighting conditions. Each frame consists of a point cloud representation of the scene and a perspective image. The frames in the dataset are annotated with the semantic category of the scene, but also with the presence or absence of a list of predefined objects appearing in the scene. In addition to the frames and annotations, the dataset is distributed with a set of tools for its use in both place classification and object recognition tasks. The large number of labeled frames in conjunction with the annotation scheme make this dataset different from existing ones. The ViDRILO dataset is released for use as a benchmark for different problems such as multimodal place classification and object recognition, 3D reconstruction or point cloud data compression.

obtención de barridos láser 3D nivelados conn el robot móvil Andábata en movimiento

Este artículo describe la adquisición de barridos tridimensionales (3D) nivelados en el robot móvil Andábata sin necesidad de detener su movimiento. Para ello, la computadora de Andábata debe integrar cada uno de los rangos láser, adquiridos con unos determinados ángulos de cabeceo y guiñada, con la información odométrica y las medidas de inclinación del vehículo para producir coordenadas Cartesianas niveladas referenciadas al inicio de cada barrido. Todo ello se ha realizado bajo el sistema operativo de robots ROS con la ayuda de paquetes estándard. El correcto funcionamiento de este esquema local de Localización y Modelado Simultáneos (SLAM) se ha comprobado experimentalmente sobre terreno inclinado.

Utformning av tak och möjligheter med automation av takstolstillverkning i trä

Purpose: The purpose of this work is to increase the possibilities of designing building components for specific demands to increase the building’s value, and to investigate how the possibilities can be affected by automating the production process. Method: The theoretical framework, which this study is based on, was collected using literature studies and was thereafter combined with the empirics, which were retrieved from qualitative methods as interviews and planned observations. A case study was made of the building Ormhuset in Jönköping. Findings: The objective of this work is to investigate the possibilities for designing roofs by using new automation methods for the production process of wooden roof structures. This study implies that parametric design can be used to generate new innovative shapes and designs that are optimised according to specific criteria. Furthermore, an increased use of automation in the production process of wooden roof trusses result in cheaper roof trusses, regardless of their shapes. The generated optimized designs are therefore cheaper and easier to produce using more automation in the production process. Implications: If parametric design is used, almost any kind of shapes can be generated and optimised. To ensure manufacturability of a design, an early connection between architect and manufacturer is important. Furthermore, increased use of automation can lead to easier and faster production of roof trusses and investing in more automation can be relevant for companies with large production volumes. Using digital files to control the manufacturing machines is time saving. There are alternative manufacturing methods for advanced roof structurers in wood, which are better suited for production, which cannot be rationalized as for roof trusses. Constraints for increased automation are often a high investment cost and limited space. Limitations: If the study is performed on another case than Ormhuset and with other respondents, the result might have differed but could be similar, why this study is not generally valid but only shows one possible outcome.

Examining Levels of Automation in the Wood Processing Industry - A case study

Companies operating in the wood processing industry need to increase their productivity by implementing automation technologies in their production systems. An increasing global competition and rising raw material prizes challenge their competitiveness. Yet, too extensive automation brings risks such as a deterioration in situation awareness and operator deskilling. The concept of Levels of Automation is generally seen as means to achieve a balanced task allocation between the operators’ skills and competences and the need for automation technology relieving the humans from repetitive or hazardous work activities. The aim of this thesis was to examine to what extent existing methods for assessing Levels of Automation in production processes are applicable in the wood processing industry when focusing on an improved competitiveness of production systems. This was done by answering the following research questions (RQ): RQ1: What method is most appropriate to be applied with measuring Levels of Automation in the wood processing industry? RQ2: How can the measurement of Levels of Automation contribute to an improved competitiveness of the wood processing industry’s production processes? Literature reviews were used to identify the main characteristics of the wood processing industry affecting its automation potential and appropriate assessment methods for Levels of Automation in order to answer RQ1. When selecting the most suitable method, factors like the relevance to the target industry, application complexity or operational level the method is penetrating were important. The DYNAMO++ method, which covers both a rather quantitative technical-physical and a more qualitative social-cognitive dimension, was seen as most appropriate when taking into account these factors. To answer RQ 2, a case study was undertaken at a major Swedish manufacturer of interior wood products to point out paths how the measurement of Levels of Automation contributes to an improved competitiveness of the wood processing industry. The focus was on the task level on shop floor and concrete improvement suggestions were elaborated after applying the measurement method for Levels of Automation. Main aspects considered for generalization were enhancements regarding ergonomics in process design and cognitive support tools for shop-floor personnel through task standardization. Furthermore, difficulties regarding the automation of grading and sorting processes due to the heterogeneous material properties of wood argue for a suitable arrangement of human intervention options in terms of work task allocation.  The application of a modified version of DYNAMO++ reveals its pros and cons during a case study which covers a high operator involvement in the improvement process and the distinct predisposition of DYNAMO++ to be applied in an assembly system.

Marketing Automation – en studie om ett modernt marknadsföringsverktyg i en svensk kontext

I takt med att digitala medier har utvecklats under de senaste åren har köpresan för-ändrats till att kunder idag i ett mycket senare skede släpper in leverantörer i dialogen. Marketing Automation adresserar den problembilden och har växt fram som en brygga mellan sälj- och marknadsprocessen. Systemet ger möjlighet att effektivt och automatiserat utveckla leads (potentiell kund). Syftet med denna studie är att undersöka hur Marketing Automation påverkar sälj- och marknadsprocesserna. Vilka förutsättningar krävs för en implementation? Ökar lönsamheten? Vi har därför valt att i det teoretiska ramverket beskriva Marketing Automation och bland annat undersöka om ett införande av Marketing Automation medför att sälj- och marknadsorganisationerna slås samman till en organisatorisk enhet. I studien har vi dessutom kartlagt och beskrivit den moderna köpresan och det som ibland kallas intäktsorganisationen. Vi har funnit att Marketing Automation är relativt outforskat i en svensk kontext. För att utröna om teorin, som i stor utsträckning bygger på internationell litteratur och internationella undersökningar, går att överföra till en svensk kontext har vi valt att genomföra en kvalitativ studie i form av en fallstudie av leverantörer av produkter och tjänster inom området samt företag, med den gemensamma nämnaren att de re-presenterar ett kunskapsintensivt erbjudande och har implementerat lösningar för Marketing Automation. I vår analys finns en samsyn mellan leverantörer och kunder i förutsättningar för ett införande, men vi kan även se hur resultaten divergerar och pekar på implikationer, inte minst avseende måluppfyllnad och samverkan mellan sälj- och marknadsorgani-sationerna. Vår slutsats visar bland annat att Marketing Automation kan leda till uppfyllnad av mjuka värden i företaget men har inte bevisats leda till ökad lönsamhet per automatik. Vi ser lönsamhet och Return on Investment (ROI) som ett område som bör utforskas vidare.