Prevention of social stress-escalated cocaine self-administration by CRF-R1 antagonist in the rat VTA

Intermittent exposure to social defeat stress can induce long-term neural plasticity that may influence escalated cocaine-taking behavior. Stressful encounters can lead to activation of dopamine neurons in the ventral tegmental area (VTA), which are modulated by corticotropin releasing factor (CRF) neurons.The study aims to prevent the effects of intermittently scheduled, brief social defeat stress on subsequent intravenous (IV) cocaine self-administration by pretreatment with a CRF receptor subtype 1 (CRF-R1) antagonist.Long-Evans rats were submitted to four intermittent social defeat experiences separated by 72 h over 10 days. Two experiments examined systemic or intra-VTA antagonism of CRF-R1 subtype during stress on the later expression of locomotor sensitization and cocaine self-administration during fixed (0.75 mg/kg/infusion) and progressive ratio schedules of reinforcement (0.3 mg/kg/infusion), including a continuous 24-h "binge" (0.3 mg/kg/infusion).Pretreatment with a CRF-R1 antagonist, CP 154,526, (20 mg/kg i.p.) prior to each social defeat episode prevented the development of stress-induced locomotor sensitization to a cocaine challenge and prevented escalated cocaine self-administration during a 24-h "binge". In addition, pretreatment with a CRF-R1 antagonist (0.3 mu g/0.5 mu l/side) into the VTA prior to each social defeat episode prevented stress-induced locomotor sensitization to a cocaine challenge and prevented escalated cocaine self-administration during a 24-h "binge".The current results suggest that CRF-R1 subtype in the VTA is critically involved in the development of stress-induced locomotor sensitization which may contribute to escalated cocaine self-administration during continuous access in a 24-h "binge".

Pineapple Leaf Fibers for Composites and Cellulose

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Non-linear analysis of reinforced concrete plates by the boundary element method and continuum damage mechanics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reinforcing properties of fencamfamine: Involvement of dopamine and opioid receptors

Fencamfamine (FCF) is a psychostimulant classified as an indirect dopamine agonist. The conditioning place preference (CPP) paradigm was used to investigate the reinforcing properties of FCF. After initial preferences had been determined, animals were conditioned with FCF (1.75, 3.5, or 7.0 mg/kg; IP). Only at the dose of 3.5 mg/kg FCF produced a significant place preference. Pretreatment with SCH23390 (0.05 mg/kg, SC) or naloxone (1.0 mg/kg SC) 10 min before FCF (3.5 mg/kg; IP) blocked both FCF-induced hyperactivity and CPP. Pretreatment with metoclopramide (10.0 mg/kg; IP) or pimozide (1.0 mg/kg, IP), respectively, 30 min or 4 h before FCF (3.5 mg/kg; IP), which blocked the FCF-induced locomotor activity, failed to influence place conditioning produced by FCF. In conclusion, the present study suggests that dopamine D 1 and opioid receptors are related to FCF reinforcing effect, while dopamine D 2 subtype receptor was ineffective in modifying FCF-induced CPP.

Unsaturated polyester based composites reinforced with curauá fiber - Preliminary studies

Curauá fiber processing characterization has been performed throughout the different processing steps. Unsaturated polyester has been used as matrix in the production of curauá reinforced composite samples. Compression molding process has been used to prepare the samples. Tensile strength, impact resistance, flexural strength, Young's modulus and elongation at break have been accessed for curauá composites in comparison with fiberglass composites. Mechanical properties were found not to attend the company's internal standards specification. However, the work has shown some alternatives to solve these problems such as the modification of equipment characteristics and resin formulation, the necessity of incorporation of a higher content of fiber and the possibility of using a new type of filler. Copyright © 2000 Society of Automotive Engineers, Inc.

Natural fiber reinforced unsaturated polyester composites - An approach on compression molding

This work has been performed at Tapetes Sao Carlos-Brazil with the cooperation of the DaimlerChrysler Research Center Team in Ulm - Germany. The objective of the present paper is to report the results obtained with natural fiber reinforced unsaturated polyester (UP) composites, concerning surface quality measurements. The fibers that have been chosen for this work were sisal and curaua. The samples were produced by compression molding technique and afterwards submitted to three different tests, namely: a) thermal aging; b) water absorption and c) artificial weathering. The surface parameters measured before and after the tests were gloss, haze, short and long-waviness. The results have shown that after the tests there is a high loss of gloss, a high increase in haze, and a high increase in short and long-waviness as well. Curaua reinforced composites had a slightly better behavior when compared with sisal reinforced composites. The effect of the presence of filler and the addition of thermoplastic polyester (TP) on the material behavior has not been evidently detected. This result shows that the conventional technology/methods applied to UP-Fiberglass systems cannot be transferred to natural fibers without any modification. The fiber-matrix interaction and its response to the presence of additives must be fully understood before a successful processing route can be developed for painted natural fibers reinforced UP. Copyright © 2001 Society of Automotive Engineers, Inc.

Theoretical model and experimental analysis of glulam beam reinforced with FRP

This work present a study of glulam beams reinforced with FRP. It was developed a theoretical model that calculates strength and stiffness of the beams. The model allows for the calculation of the bending moment, the hypothetical distribution of linear strains along the height of the beam, and considers the wood has a linear elastic fragile behavior in tension parallel to the fibers and bilinear in compression parallel to the fibers, initially elastic and subsequently inelastic, with a negative decline in the stress-strain diagram. The stiffness was calculated by the transformed section method. Twelve non-reinforced and fiberglass reinforced glulam beams were evaluated experimentally to validate the proposed theoretical model. The results obtained indicate good congruence between the experimental and theoretical values.

A place preference test in the fish Nile tilapia

The Nile tilapia fish (Oreochromis niloticus) has a high potential to be used as a model in neuroscience studies. In the present study, the preference of the Nile tilapia between a gravel-enriched (GEE), a shelter-enriched (SEE) or a non-enriched (NEE) environment was determined, for developing a place preference model. Nile tilapia had an initial preference for GEE, but after 1 day of observation, the fish stabilized their frequency of visits among compartments. Hence, any stimulus motivating tilapia increase in compartment visiting indicates a positively reinforcing effect. This feature is very useful for the development of new behavioural paradigms for fish in tests using environmental discrimination, such as the conditioning place preference test. © 2006 Elsevier GmbH. All rights reserved.

Bacterial cellulose from glucanacetobacter xylinus: Preparation, properties and applications

This chapter deals with the cellulose produced by the Glucanacetobacter xylinus strain, called bacterial cellulose, which is a remarkably versatile biomaterial usable in wide variety of domains, such as papermaking, optics, electronics, acoustics, and biomedical devices. Its unique structure shows entangled ultrafine fibers, which provide excellent mechanical strength, besides biodegradability, biocompatibility, high water-holding capacity, and high crystallinity. Some of its applications are described, such as complementary nutrition (. nata de coco), artificial temporary skin for wounds and burns, dental aid, artificial blood vessels and micronerve surgery, DNA separation, composite reinforcement, electronic paper, light emitting diodes, and fuel cell membranes. © 2007 Elsevier Ltd. All rights reserved.

Stacking faults in SiCf/SiC composite obtained by chemical vapor reaction process

SiC fiber-reinforced SiC matrix composite (SiCf/SiC) is one of the leading candidates in ceramic materials for engineering applications due to its unique combination of properties such as high thermal conductivity, high resistance to corrosion and working conditions. Fiber-reinforced composites are materials which exhibit a significant improvement in properties like ductility in comparison to the monolithic SiC ceramic. The SiCf/SiC composite was obtained from a C/C composite precursor using convertion reaction under high temperature and controlled atmosphere. In this work, SiC phase presented the stacking faults in the structure, being not possible to calculate the unit cell size, symmetry and bond lengths but it seem equal card number 29-1129 of JCPDS.

Review of Caribbean economic and social performance in the 1980's and 1990's

Includes bibliography

Test results of fault current limiter using YBCO tapes with shunt protection

A Fault Current Limiter (FCL) based on high temperature superconducting elements with four tapes in parallel were designed and tested in 220 V line for a fault current peak between 1 kA to 4 kA. The elements employed second generation (2G) HTS tapes of YBCO coated conductor with stainless steel reinforcement. The tapes were electrically connected in parallel with effective length of 0.4 m per element (16 elements connected in series) constituting a single-phase unit. The FCL performance was evaluated through over-current tests and its recovery characteristics under load current were analyzed using optimized value of the shunt protection. The projected limiting ratio achieved a factor higher than 4 during fault of 5 cycles without degradation. Construction details and further test results will be shown in the paper. © 2010 IOP Publishing Ltd.

Seguimiento multidisciplinario en el control del penfigoide de membranas mucosas

The term Mucous Membrane Pemphigoid includes a group of chronic and autoimmune vesiculobullous diseases involving mainly the mucosa. The aim of present paper is to describe two clinical cases of Mucous Membrane Pemphigoid with gingival involvement to arrive to a proper diagnosis of the lesion and also to discuss the therapeutic behavior. Different complementary examinations were conducted including Nikolsky test, incisional biopsy, the LE cells study and of antinuclear antibodies, as well as the evaluation of dermatologists and ophthalmologists. It was necessary the replacement of toothpastes, the nutritional and psychological guiding, the hygiene care and the use of topic corticoids. There were periods of remission and exacerbation of clinical picture during follow-up being necessary the therapeutics fitting and the oral hygiene care reinforcement. It is important the multidisciplinary interaction in the care of these cases for treatment and follow-up control, as well as to reinforce all orientations and cares related to oral hygiene and the caution in the use of corticoids.

Model of a game for improving integrated decisions in production management

This paper presents the results obtained with a business game whose model represents the decision making process related to two moments at an industrial company. The first refers to the project of the industrial plant, and the second to its management. The game model was conceived so the player's first decision would establish capacity and other parameters such as quantities of each product to produce, marketing expenses, research and development, quality, advertising, salaries, if purchases will be made in installments or in cash, if there will be credit sales and how many installments will be allowed and the number of workers in the assembly area. An experiment was conducted with employees of a Brazilian company. Data obtained indicate that the players have lack of contents, especially in finances. Although these results cannot be generalized, they confirm prior results with undergraduate and graduate students and they indicate the need for reinforcement in this undergraduate area. © 2012 Springer-Verlag.

New developments for lignocellulosics-nanocomposites with low carbon footprint

Cellulose nanofibrils have been evaluated as reinforcement material in polymeric matrixes due to their potential to improve the mechanical, optical, and dielectric properties of these matrixes as well as its environmental positive footprint. This work describes how banana nanocellulose can be used to replace others not so friendly materials in many applications including, biomaterials, automotive industries and packaging by proved with their mechanical properties. The process used is very mild to the environment and consists of a high pressure fibrillation followed by a chemical purification which affects the fiber morphology. Many fibers characterization processes were used including microscopy techniques and X-ray diffraction to study the structure and properties of the prepared nanofibers and composites. Microscopy studies showed that the used individualization processes lead to a unique morphology of interconnected web-like structure of the fibers. © 2012 Materials Research Society.