Homogeneous assay technologies in drug screening: Quenching Resonance Energy Transfer (QRET) technique

Information gained from the human genome project and improvements in compound synthesizing have increased the number of both therapeutic targets and potential lead compounds. This has evolved a need for better screening techniques to have a capacity to screen number of compound libraries against increasing amount of targets. Radioactivity based assays have been traditionally used in drug screening but the fluorescence based assays have become more popular in high throughput screening (HTS) as they avoid safety and waste problems confronted with radioactivity. In comparison to conventional fluorescence more sensitive detection is obtained with time-resolved luminescence which has increased the popularity of time-resolved fluorescence resonance energy transfer (TR-FRET) based assays. To simplify the current TR-FRET based assay concept the luminometric homogeneous single-label utilizing assay technique, Quenching Resonance Energy Transfer (QRET), was developed. The technique utilizes soluble quencher to quench non-specifically the signal of unbound fraction of lanthanide labeled ligand. One labeling procedure and fewer manipulation steps in the assay concept are saving resources. The QRET technique is suitable for both biochemical and cell-based assays as indicated in four studies:1) ligand screening study of β2 -adrenergic receptor (cell-based), 2) activation study of Gs-/Gi-protein coupled receptors by measuring intracellular concentration of cyclic adenosine monophosphate (cell-based), 3) activation study of G-protein coupled receptors by observing the binding of guanosine-5’-triphosphate (cell membranes), and 4) activation study of small GTP binding protein Ras (biochemical). Signal-to-background ratios were between 2.4 to 10 and coefficient of variation varied from 0.5 to 17% indicating their suitability to HTS use.

Additional revenue opportunities in pulp mills and their impacts on the kraft process

Although the concept of multi-products biorefinery provides an opportunity to meet the future demands for biofuels, biomaterials or chemicals, it is not assured that its implementation would improve the profitability of kraft pulp mills. The attractiveness will depend on several factors such as mill age and location, government incentives, economy of scale, end user requirements, and how much value can be added to the new products. In addition, the effective integration of alternative technologies is not straightforward and has to be carefully studied. In this work, detailed balances were performed to evaluate possible impacts that lignin removal, hemicelluloses recovery prior to pulping, torrefaction and pyrolysis of wood residues cause on the conventional mill operation. The development of mill balances was based on theoretical fundamentals, practical experience, literature review, personal communication with technology suppliers and analysis of mill process data. Hemicelluloses recovery through pre-hydrolysis of chips leads to impacts in several stages of the kraft process. Effects can be observed on the pulping process, wood consumption, black liquor properties and, inevitably, on the pulp quality. When lignin is removed from black liquor, it will affect mostly the chemical recovery operation and steam generation rate. Since mineral acid is used to precipitate the lignin, impacts on the mill chemical balance are also expected. A great advantage of processing the wood residues for additional income results from the fact that the pulping process, pulp quality and sales are not harmfully affected. For pulp mills interested in implementing the concept of multi-products biorefinery, this work has indicated possible impacts to be considered in a technical feasibility study.

Screening of resistance to egyptian broomrape infection in tomato varieties

Parasitic weed species of the genus Orobanche are serious threat for the production of several crops in Europe, Africa and Asia. Research on resistant host plant varieties is one of the most effective management strategies for this parasitic weed. In this study, the susceptibility of twenty-nine tomato varieties to broomrape infection (Orobanche aegyptiaca) under greenhouse conditions was investigated. The employed experimental design was completely randomized with three replications. Differences in susceptibility to infection were monitored among tomato varieties based on their difference in the number of emerged shoots of broomrape and broomrape dry weight (shoots and tubercles). Date of Orobanche emergence varied over a period of 3 to 30 days between varieties. Very late infection was monitored for varieties of Cal-jN3, Viva, Caligen 86, Packmor, CSX 5013, Hyb. PS 6515 and Hyb Petopride5. Differences in the growth and fruit yield among tomato varieties were also found in response to broomrape infestation. Moderate levels of resistance were obtained in Viva, Caligen 86, Hyb. PS 6515, Hyb.Firenze (PS 8094) and Cal-jN3 among other tomato varieties. In contrast, varieties of Kimia-Falat, Hyb. Petopride II and Hyb.AP865 were the most susceptible hosts to Orobanche aegyptiaca.

Painelajittelu

Kirjallisuustyössä tarkasteltiin lajittelun historiaa. Lisäksi esiteltiin lajittelun teoriaa ja parametreja. Lopuksi perehdyttiin painelajittimen rakenteeseen, toimintaperiaatteeseen ja käyttökohteisiin.

The Effect of Plant Closures on Market Value: Empirical Evidence from Pulp and Paper Industry 2004-2012

The aim of this study was to research how plant closure announcements affect the market value of the largest pulp and paper industry companies in the world. Also the effect of announcements on competitors was researched and whether the location of plants, timing, reasons for the closures, and characteristics of the closing firms and competitors have an impact on the results. The overall sample included 57 events in the years 2004-2012 and event study was used as a research method. Main theories were signaling theory and spillover effect. According to empirical results, investors consider plant closure announcements as a positive signal for market value. The spillover effect on competitors was, on average, positive and characteristics of the firms and closures had an effect on the results. Furthermore, the market generally predicted the closures and overreacted to them on the announcement day and after it. It is possible for corporate management and investors to learn from the results and use them as support for their decision making.

The Effects of the Breast Cancer Mammography Screening Programme in Women aged 40 to 84 years in Turku, Finland (1987-2009)

The objective of this thesis was to evaluate whether a more extensive mammography screening programme (TurkuMSP) conducted by the city of Turku, had an effect on breast cancer (BC) incidence, survival, or mortality in years 1987 to 2009. Despite the fact that some studies have suggested a 20 percent reduction in BC mortality due to mammography screening, there are findings of harm to subjects, which are claimed to negate the benefits of screening. Thus, the aims of this study are most pertinent. A total of 176 908 screening examinations were performed in 36 000 women aged 40−74 during the years 1987−1997. In all, 685 primary BCs were found in the screened women, either screen-detected (n=531) or during screening intervals (n=154). Survival and BC recurrence rate of women with screen-detected BC was compared to 184 women with clinical BCs detected among individuals who did not take part in the screening. The invitation interval, which may influence the outcome, was studied in the age group 40 to 49 by inviting those born in even calendar years annually for mammography screening and those born in odd years, triennially. In addition, BC incidence and mortality in the total female population of Turku aged 40 to 84 years was compared with the respective figures of Helsinki and the rest of Finland, both during the pre-screening era (1976-1986) and the screening era (1987-2009). The study was designed to compare women by age groups, because women aged 50 to 59 were generally screened in all of Finland, whereas only in Turku women aged 40 to 49 and 60 to 74 were screened in addition. Data regarding cancer recurrence were derived from the Finnish Cancer Registry and data on deaths were collected from Statistics Finland. In survival analyses, screened women with invasive BC had a significantly higher survival rate than the women with clinical BC. The survival benefit started to appear already during the first follow-up years and was evident in all age groups. A marginal survival extension was also seen in screened women when BC had spread to ipsilateral axillary nodes already at diagnosis. Recurrence-free survival rate after BC treatment was significantly more favorable among the screened women compared with women with BC found clinically. The screening invitation interval did not significantly influence BC mortality in the subset of women aged 40 to 49 years. There were no consistent differences in the changes of BC incidence between Turku and the comparison areas during the screening era. In Turku, the BC mortality incidence in women aged 55−69 years was significantly lower during the screening era (from 1987 to 1997) compared with the pre-screening era, whereas no such change was found in the city of Helsinki or Tampere. When comparing the changes in incidence-based BC mortality during years 1987 to 2009 in Turku to those of Helsinki and the rest of Finland, there was a suggestion of more than 20 percent lower mortality in Turku among oldest age group (75-84 years) compared with the reference residential areas, but the differences were not consistently significant. Interpretation of the study results should be made with caution because there were no random control groups, and on the other hand, the number of cases in subgroups was fairly low to yield definite conclusions. Also due to the many statistical analyses, some of the findings may be due to chance. The results are, however, suggestive for a decrease of BC mortality in the elderly age groups due to wide mammography screening. This finding needs confirmation in further studies before recommending an expansion of mammography screening to women up to the age of 74 years

A simple RT-PCR-based strategy for screening connexin identity

Vertebrate gap junctions are aggregates of transmembrane channels which are composed of connexin (Cx) proteins encoded by at least fourteen distinct genes in mammals. Since the same Cx type can be expressed in different tissues and more than one Cx type can be expressed by the same cell, the thorough identification of which connexin is in which cell type and how connexin expression changes after experimental manipulation has become quite laborious. Here we describe an efficient, rapid and simple method by which connexin type(s) can be identified in mammalian tissue and cultured cells using endonuclease cleavage of RT-PCR products generated from "multi primers" (sense primer, degenerate oligonucleotide corresponding to a region of the first extracellular domain; antisense primer, degenerate oligonucleotide complementary to the second extracellular domain) that amplify the cytoplasmic loop regions of all known connexins except Cx36. In addition, we provide sequence information on RT-PCR primers used in our laboratory to screen individual connexins and predictions of extension of the "multi primer" method to several human connexins.

Effects of the partial removal of wood hemicelluloses on the properties of kraft pulp

The objective of this work was to study the effects of partial removal of wood hemicelluloses on the properties of kraft pulp.The work was conducted by extracting hemicelluloses (1) by a softwood chip pretreatment process prior to kraft pulping, (2) by alkaline extraction from bleached birch kraft pulp, and (3) by enzymatic treatment, xylanase treatment in particular, of bleached birch kraft pulp. The qualitative and quantitative changes in fibers and paper properties were evaluated. In addition, the applicability of the extraction concepts and hemicellulose-extracted birch kraft pulp as a raw material in papermaking was evaluated in a pilot-scale papermaking environment. The results showed that each examined hemicellulose extraction method has its characteristic effects on fiber properties, seen as differences in both the physical and chemical nature of the fibers. A prehydrolysis process prior to the kraft pulping process offered reductions in cooking time, bleaching chemical consumption and produced fibers with low hemicellulose content that are more susceptible to mechanically induced damages and dislocations. Softwood chip pretreatment for hemicellulose recovery prior to cooking, whether acidic or alkaline, had an impact on the physical properties of the non-refined and refined pulp. In addition, all the pretreated pulps exhibited slower beating response than the unhydrolyzed reference pulp. Both alkaline extraction and enzymatic (xylanase) treatment of bleached birch kraft pulp fibers indicated very selective hemicellulose removal, particularly xylan removal. Furthermore, these two hemicellulose-extracted birch kraft pulps were utilized in a pilot-scale papermaking environment in order to evaluate the upscalability of the extraction concepts. Investigations made using pilot paper machine trials revealed that some amount of alkalineextracted birch kraft pulp, with a 24.9% reduction in the total amount of xylan, could be used in the papermaking stock as a mixture with non-extracted pulp when producing 75 g/m2 paper. For xylanase-treated fibers there were no reductions in the mechanical properties of the 180 g/m2 paper produced compared to paper made from the control pulp, although there was a 14.2% reduction in the total amount of xylan in the xylanase-treated pulp compared to the control birch kraft pulp. This work emphasized the importance of the hemicellulose extraction method in providing new solutions to create functional fibers and in providing a valuable hemicellulose co-product stream. The hemicellulose removal concept therefore plays an important role in the integrated forest biorefinery scenario, where the target is to the co-production of hemicellulose-extracted pulp and hemicellulose-based chemicals or fuels.

e-Business and collaboration: A case study of pulp supply chain

This thesis studies how the case company could digitalize its supply chain and what kind of advantages this would create in the light of supply chain efficiency. The case company manufactures several pulp products that are used for paper, fabrics and packaging products by customers worldwide. The paper and pulp industry has been paying more and more attention to increasing supply chain efficiency with new operating and service models made possible by today’s information technology. The main focus of this study is on the supply chain between the case company and its key customers and the goal is to find ways to make the operations between them as efficient as possible. The study relays heavily on collaboration techniques and digitalization technologies. In addition to a theoretical framework, the study includes several empirical studies that offer real-life examples of how these theories and technologies are applied in operating environments similar to the case company. A plan with strategic and operational levels is created according to the findings of the previous sections to support the case company’s future operations. The plan is based on an RFID-supported collaboration model that aims to advance information sharing between the supply chain partners. The time for an RFID-investment is sought to be very optimal and the benefits of such system to be noteworthy, but challenging to measure in monetary terms.

Production planning and optimization of a pulp mill: introduction of the optimisation based scheduling software for pulp industry

The objective of this project was to introduce a new software product to pulp industry, a new market for case company. An optimization based scheduling tool has been developed to allow pulp operations to better control their production processes and improve both production efficiency and stability. Both the work here and earlier research indicates that there is a potential for savings around 1-5%. All the supporting data is available today coming from distributed control systems, data historians and other existing sources. The pulp mill model together with the scheduler, allows what-if analyses of the impacts and timely feasibility of various external actions such as planned maintenance of any particular mill operation. The visibility gained from the model proves also to be a real benefit. The aim is to satisfy demand and gain extra profit, while achieving the required customer service level. Research effort has been put both in understanding the minimum features needed to satisfy the scheduling requirements in the industry and the overall existence of the market. A qualitative study was constructed to both identify competitive situation and the requirements vs. gaps on the market. It becomes clear that there is no such system on the marketplace today and also that there is room to improve target market overall process efficiency through such planning tool. This thesis also provides better overall understanding of the different processes in this particular industry for the case company.

Pressforming of a tray from a pulp sheet

The aim of this thesis work was to verify the possibility to produce tray packages directly from pulp sheets using press forming techniques. The different existing raw materials of pulp, various sources of molded pulp and different methods of production of molded pulp were studied. Nine different raw materials which were used for experimental work were provided by Stora Enso mills, and Stora Enso Research Centre, Imatra, Finland. The laboratory tests were carried out using LUT Adjustable packaging line at Lappeenranta University of Technology. The results prove that long virgin fibres of pine pulp seems to have better formability with high moisture content compared to others. No significant improvements were noticed with conditioned samples, never the less far studies has to be done to find optimal conditions for production. The results indicated the possibility for making pressformed tray from two different pulp qualities (Sunila pulp and Enopine). The method could prove to be beneficiary as the production line could be shortened and investment in board machines could be avoided if the trays were pressed directly from pulp sheets. Also the labour costs would be reduced. However, there is much work to be done before the quality of a tray produced out of a pulp sheet is comparable to a tray produced out of tray board.

Serum antigliadin antibody levels as a screening criterion before jejunal biopsy indication for celiac disease in a developing country

The objective of the present study was to determine the efficacy of detection of antigliadin immunoglobulins G and A (IgG and IgA) for the diagnosis of celiac disease in a developing country, since other enteropathies might alter the levels of these antibodies. Three groups were studied: 22 patients with celiac disease (mean age: 30.6 months), 61 patients with other enteropathies (mean age: 43.3 months), and 46 patients without enteropathies (mean age: 96.9 months). Antigliadin IgG and IgA ELISA showed sensitivity of 90.9 and 95.5%, respectively. With the hypothetical values of prevalence ranging from 1:500 to 1:2000 liveborns, the positive predictive value varied from 8.5 to 2.3% for IgG and from 4.8 to 1.1% for IgA. Considering the patients without enteropathies, specificity was 97.8 and 95.7% for IgG and IgA, respectively. In patients with other enteropathies, specificity was 82.0 and 84.1%, respectively. When patients with and without other enteropathies were considered as a whole, specificity was 88.8 and 91.6%, respectively. The specificity of positive IgG or IgA was 93.5% in children without enteropathies and 78.7% in the presence of other enteropathies. The negative predictive value for hypothetical prevalences varying from 1:500 to 1:2000 liveborns was 99.9%. Thus, even in developing countries where the prevalence of non-celiac enteropathies is high, the determination of serum antigliadin antibody levels is a useful screening test prior to the jejunal biopsy in the investigation of intestinal malabsorption.

Screening for carbohydrate-binding proteins in extracts of Uruguayan plants

The presence of carbohydrate-binding proteins, namely lectins, ß-galactosidases and amylases, was determined in aqueous extracts of plants collected in Uruguay. Twenty-six extracts were prepared from 15 Uruguayan plants belonging to 12 Phanerogam families. Among them, 18 extracts caused hemagglutination (HAG) that was inhibited by mono- and disaccharides in 13 cases, indicating the presence of lectins. The other 8 extracts did not cause any HAG with the four systems used to detect HAG activity (rabbit and mouse red cells, trypsin-treated rabbit and mouse red cells). For the extracts prepared from Solanum commersonii, HAG activity and HAG inhibition were similar for those prepared from tubers, leaves and fruits, with the chitocompounds being responsible for all the inhibitions. Purification of the S. commersonii tuber lectin was carried out by affinity chromatography on asialofetuin-Sepharose, and SDS-PAGE under reducing conditions gave a single band of Mr of approximately 80 kDa. The monomer N-acetylglucosamine did not inhibit HAG induced by the purified lectin, but chitobiose inhibited HAG at 24 mM and chitotriose inhibited it at 1 mM. ß-Galactosidase activity was detected in leaves and stems of Cayaponia martiana, and in seeds from Datura ferox. Only traces of amylase activity were detected in some of the extracts analyzed. The present screening increases knowledge about the occurrence of carbohydrate-binding proteins present in regional plants.

High specificity PCR screening for 22q11.2 microdeletion in three different ethnic groups

Congenital heart defects are the most common of all human birth defects. Numerous studies have shown that a deletion within chromosome 22q11 is associated with DiGeorge syndrome and certain forms of sporadic congenital cardiovascular disease. We have determined the value of a PCR assay using markers D22S941, D22S944 and D22S264 designed for the screening of 22q11.2 deletion through consecutive homozygosity in an ethnically admixed urban population. The study population comprised 149 unrelated men and women from three different ethnic groups (white, mulatto and black). Test specificity for the overall population was estimated at 98.3%. We found no significant difference when comparing heterozygosity indices and ethnicity (P value = 0.43 (D22S944), 0.22 (D22S264), and 0.58 (D22S941)). There was no significant difference regarding assay specificity between the three different ethnic groups studied. This assay could constitute a cost-effective way to screen a large number of patients at increased risk, since PCR techniques are easily available, are fast, can be automatized, and are significantly less expensive than fluorescence in situ hybridization.

Screening for mutations in human alpha-globin genes by nonradioactive single-strand conformation polymorphism

Point mutations and small insertions or deletions in the human alpha-globin genes may produce alpha-chain structural variants and alpha-thalassemia. Mutations can be detected either by direct DNA sequencing or by screening methods, which select the mutated exon for sequencing. Although small (about 1 kb, 3 exons and 2 introns), the alpha-globin genes are duplicate (alpha2 and alpha1) and highy G-C rich, which makes them difficult to denature, reducing sequencing efficiency and causing frequent artifacts. We modified some conditions for PCR and electrophoresis in order to detect mutations in these genes employing nonradioactive single-strand conformation polymorphism (SSCP). Primers previously described by other authors for radioactive SSCP and phast-SSCP plus denaturing gradient gel electrophoresis were here combined and the resultant fragments (6 new besides 6 original per alpha-gene) submitted to silver staining SSCP. Nine structural and one thalassemic mutations were tested, under different conditions including two electrophoretic apparatus (PhastSystem™ and GenePhor™, Amersham Biosciences), different polyacrylamide gel concentrations, run temperatures and denaturing agents, and entire and restriction enzyme cut fragments. One hundred percent of sensitivity was achieved with four of the new fragments formed, using the PhastSystem™ and 20% gels at 15ºC, without the need of restriction enzymes. This nonradioactive PCR-SSCP approach showed to be simple, rapid and sensitive, reducing the costs involved in frequent sequencing repetitions and increasing the reliability of the results. It can be especially useful for laboratories which do not have an automated sequencer.