Mouse Grueneberg ganglion neurons share molecular and functional features with C. elegans amphid neurons.

The mouse Grueneberg ganglion (GG) is an olfactory subsystem located at the tip of the nose close to the entry of the naris. It comprises neurons that are both sensitive to cold temperature and play an important role in the detection of alarm pheromones (APs). This chemical modality may be essential for species survival. Interestingly, GG neurons display an atypical mammalian olfactory morphology with neurons bearing deeply invaginated cilia mostly covered by ensheathing glial cells. We had previously noticed their morphological resemblance with the chemosensory amphid neurons found in the anterior region of the head of Caenorhabditis elegans (C. elegans). We demonstrate here further molecular and functional similarities. Thus, we found an orthologous expression of molecular signaling elements that was furthermore restricted to similar specific subcellular localizations. Calcium imaging also revealed a ligand selectivity for the methylated thiazole odorants that amphid neurons are known to detect. Cellular responses from GG neurons evoked by chemical or temperature stimuli were also partially cGMP-dependent. In addition, we found that, although behaviors depending on temperature sensing in the mouse, such as huddling and thermotaxis did not implicate the GG, the thermosensitivity modulated the chemosensitivity at the level of single GG neurons. Thus, the striking similarities with the chemosensory amphid neurons of C. elegans conferred to the mouse GG neurons unique multimodal sensory properties.

Mechanisms of garnet growth in eclogites of the Zermatt-Saas Fee unit, Western Alps

THESIS ABSTRACT Garnets are one of the key metamorphic minerals used to study peak metamorphic conditions or crystallization ages. Equilibrium is typically assumed between the garnet and the matrix. This thesis attempts to understand garnet growth in the Zermatt-Saas Fee (ZSF) eclogites, and discusses consequences for Sm/Nd and Lu/Hf dating and the equilibrium assumption. All studied garnets from the ZSF eclogites are strongly zoned in Mn, Fe, Mg, and Ca. Methods based on chemical zoning patterns and on 3D spatial statistics indicate different growth mechanisms depending on the sample studied. Garnets from the Pfulwe area are grown in a system where surface kinetics likely dominated over intergranular diffusion kinetics. Garnets fram two other localities, Nuarsax and Lago di Cignana, seem to have grown in a system where intergranular diffusion kinetics were dominating over surface kinetics, at least during initial growth. Garnets reveal strong prograde REE+Y zoning. They contain narrow central peaks for Lu + Yb + Tm ± Er and at least one additional small peak towards the rim. The REE Sm + Eu + Gd + Tb ± Dy are depleted in the cores but show one prominent peak close to the rim. It is shown that these patterns cam be explained using a transient matrix diffusion model where REE uptake is limited by diffusion in the matrix surrounding the porphyroblast. The secondary peaks in the garnet profiles are interpreted to reflect thermally activated diffusion due to a temperature increase during prograde metamorphism. The model predicts anomalously low 176Lu/177Hf and 147Sm/144Nd ratios in garnets where growth rates are fast compared to diffusion of the REE, which decreases garnet isochron precisions. The sharp Lu zoning was further used to constrain maximum Lu volume diffusion rates in garnet. The modeled minimum pre-exponential diffusion coefficient which fits the measured central peak is in the order of Do = 5.7* 106 m2/s, taking an activation energy of 270 kJ/mol. The latter was chosen in agreement with experimentally determined values. This can be used to estimate a minimum closure temperature of around 630°C for the ZSF zone. Zoning of REE was combined with published Lu/Hf and Sm/Nd age information to redefine the prograde crystallization interval for Lago di Cignana UHP eclogites. Modeling revealed that a prograde growth interval in the order of 25 m.y. is needed to produce the measured spread in ages. RÉSUMÉ Le grenat est un minéral métamorphique clé pour déterminer les conditions du pic de métamorphisme ainsi que l'âge de cristallisation. L'équilibre entre le grenat et la matrice est requis. Cette étude a pour but de comprendre la croissance du grenat dans les éclogites de la zone de Zermatt-Saas Fee (ZSF) et d'examiner quelques conséquences sur les datations Sm/Nd et Lu/Hf. Tous les grenats des éclogites de ZSF étudiés sont fortement zonés en Mn, Fe, Mg et partiellement en Ca. Les différentes méthodes basées sur le modèle de zonation chimique ainsi que sur les statistiques de répartition spatiale en 3D indiquent un mécanisme de croissance différent en fonction de la localité d'échantillonnage. Les grenats provenant de la zone de Pfulwe ont probablement crû dans un système principalement dominé par la cinétique de surface au détriment de 1a cinétique de diffusion intergranulaire. Les grenats provenant de deux autres localités, Nuarsax et Lago di Cignana, semblent avoir cristallisé dans un système dominé par la diffusion intergranulaire, au moins durant les premiers stades de croissance. Les grenats montrent une forte zonation prograde en Terres Rares (REE) ainsi qu'en Y. Les profils présentent au coeur un pic étroit en Lu + Yb+ Tm ± Er et au moins un petit pic supplémentaire vers le bord. Les coeurs des grenats sont appauvris en Sm + Eu + Gd + Tb ± Dy, mais les bords sont marqués par un pic important de ces REE. Ces profils s'expliquent par un modèle de diffusion matricielle dans lequel l'apport en REE est limité par la diffusion dans la matrice environnant les porphyroblastes. Les pics secondaires en bordure de grain reflètent la diffusion activée par l'augmentation de la température lors du métamorphisme prograde. Ce modèle prédit des rapports 176Lu/177Hf et 147Sm/144Nd anormalement bas lorsque les taux de croissance sont plus rapides que la diffusion des REE, ce qui diminue la précision des isochrones impliquant le grenat. La zonation nette en Lu a permis de contraindre le maximum de diffusion volumique par une approche numérique. Le coefficient de diffusion minimum modélisé en adéquation avec les pics mesurés est de l'ordre de Do = 5.7*10-6 m2/s, en prenant une énergie d'activation ~270 kJ/mol déterminée expérimentalement. Ainsi, la température de clôture minimale est estimée aux alentours de 630°C pour la zone ZSF. Des nouvelles données de zonation de REE sont combinées aux âges obtenus avec les rapports Lu/Hf et Sm/Nd qui redéfissent l'intervalle de cristallisation prograde pour les éclogites UHP de Lago di Cignana. La modélisation permet d'attribuer au minimum un intervalle de croissance prograde de 25 Ma afin d'obtenir les âges préalablement mesurés. RESUME GRAND PUBLIC L'un des principaux buts du pétrologue .métamorphique est d'extraire des roches les informations sur l'évolution temporelle, thermique et barométrique qu'elles ont subi au cours de la formation d'une chaîne de montagne. Le grenat est l'un des minéraux clés dans une grande variété de roches métamorphiques. Il a fait l'objet de nombreuses études dans des terrains d'origines variées ou lors d'études expérimentales afin de comprendre ses domaines de stabilité, ses réactions et sa coexistence avec d'autres minéraux. Cela fait du grenat l'un des minéraux les plus attractifs pour la datation des roches. Cependant, lorsqu'on l'utilise pour la datation et/ou pour la géothermobarométrie, on suppose toujours que le grenat croît en équilibre avec les phases coexistantes de la matrice. Pourtant, la croissance d'un minéral est en général liée au processus de déséquilibre. Cette étude a pour but de comprendre comment croît le grenat dans les éclogites de Zermatt - Saas Fee et donc d'évaluer le degré de déséquilibre. Il s'agit aussi d'expliquer les différences d'âges obtenues grâce aux grenats dans les différentes localités de l'unité de Zermatt-Saas Fee. La principale question posée lors de l'étude des mécanismes de croissance du grenat est: Parmi les processus en jeu lors de la croissance du grenat (dissolution des anciens minéraux, transport des éléments vers le nouveau grenat, précipitation d'une nouvelle couche en surface du minéral), lequel est le plus lent et ainsi détermine le degré de déséquilibre? En effet, les grenats d'une des localités (Pfulwe) indiquent que le phénomène d'adhérence en surface est le plus lent, contrairement aux grenats des autres localités (Lago di Cignana, Nuarsax) dans lesquels ce sont les processus de transport qui sont les plus lents. Cela montre que les processus dominants sont variables, même dans des roches similaires de la même unité tectonique. Ceci implique que les processus doivent être déterminés individuellement pour chaque roche afin d'évaluer le degré de déséquilibre du grenat dans la roche. Tous les grenats analysés présentent au coeur une forte concentration de Terres Rares: Lu + Yb + Tm ± Er qui décroît vers le bord du grain. Inversement, les Terres Rares Sm + Eu + Gd + Tb ± Dy sont appauvries au coeur et se concentrent en bordure du grain. La modélisation révèle que ces profils sont-dus à des cinétiques lentes de transport des Terres Rares. De plus, les modèles prédisent des concentrations basses en éléments radiogéniques pères dans certaines roches, ce qui influence fortement sur la précision des âges obtenus par la méthode d'isochrone. Ceci signifie que les roches les plus adaptées pour les datations ne doivent contenir ni beaucoup de grenat ni de très gros cristaux, car dans ce cas, la compétition des éléments entre les cristaux limite à de faibles concentrations la quantité d'éléments pères dans chaque cristal.

Termination of pregnancy among teenagers - why more surgical terminations?

Introduction: In 2012, a study by K. Chatziioannidou and S-C. Renteria showed that teenagers chose to undergo a surgical termination of pregnancy (TOP) more often than a medical TOP (mifepristone followed by misoprostol) when they decided to terminate a pregnancy. It also showed that the teenagers' choice for a medical versus surgical method is inversely proportional to the adults' choice although the efficiency of the medical method showed even better results for teenagers than for adults. According to the hypothesis made, the reasons for this choice might be influenced by the following facts: (i) the belated call to make an appointment, the medical procedure not being available after 9 weeks of gestation; (ii) the imperative request for confidentiality; (iii) the beliefs and subjective appreciation of the medical staff. Objectives: The aim of this retrospective and qualitative study is to analyse the reasons why, in case of a TOP, teenagers chose the surgical method more often than their adult counterparts. Material: (i) All teenagers who were admitted for an abortive procedure during 2011 in the in- or outpatient ward. (ii) The professional team (midwives and sexual and reproductive counsellors) in charge in the case of a TOP request. Methods: The information about the patient's history and the biopsycho- social data was retrieved from the patient files filled out by midwives and sexual and reproductive health counsellors during the first appointment for a TOP request or during its process. The professionals' appreciation was evaluated by means of a semi-structured questionnaire. Results: Concerning the choice of the method for a pregnancy termination, the results of our research show that: (i) Out of 47 teenagers, 27 chose the surgical method and 17 the medical method. (ii) Three had a second trimester abortion (which includes use of the medical method). (iii) Fifteen teenagers out of the 27 who chose a surgical method consulted between the 9th and 14th weeks of amenorrhoea and therefore did not have any other choice. The reasons for their 'late arrival' will be explained in detail. The 12 teenagers who arrived before the 8th week of amenorrhoea and chose to undertake abortion by suction & curettage under general anaesthesia did it for the following reasons: (i) Four were afraid of bleeding and pain. (ii) Five thought that the organisation of the surgical procedure was easier. (iii) Two did not trust the abortion pill. (iv) One was taken to her mother's gynaecologist where she had a D&C. Confidentiality was requested nine times out of 27 when choosing the surgical method, and six times out of 17 when choosing the medical method. Therefore, although confidentiality concerns a third of the teenagers' pregnancy termination requests, it does not seem to be a significant element for the choice of the method. As for the subjective appreciation of the professionals, the first results of the discussions seem to show that teenagers were reluctant or resistant towards the medical method. Conclusion: This study shows that the reasons why teenagers still prefer the use of the surgical over the medical method compared to adults, seem to include the late request for an appointment, fear of pain and bleeding and organisational issues. Confidentiality does not seem to greatly influence the teenagers' choice. Nonetheless, medical professionals seem to favour the suction curettage procedure performed under anesthesia because they associate young age with vulnerability and psychological frailty and consequently diminished ability to cope with pain and emotional distress during the medical procedures.

Ydinvoimalan paineakun mallinnus

Tässä työssä on käytetty VTT:n ja Fortumin kehittämääAPROS simulaatio-ohjelmistoa vesi-ilma -täytteisen paineakun käyttäytymisen tutkimiseen. Tavoitteena oli tarkastella APROSin paineakkumallin käyttäytymistä alhaisessa lämpötilassa käyttäen 6-yhtälömallia sekä rakentaa vaihtoehtoiseksi laskentamenetelmäksi kaksi analyyttistä laskentamallia korvaamaan APROSin sisäinen laskenta. Kyseiset analyyttiset mallit ovat isentrooppinen ja isoterminen ja ne on rakennettu kokonaan käyttäen APROSin omia moduuleja. Työ sisältää APROSin version 5.06 sekä työn aikana kehitetyn kehitysversion vertailut eri alkulämpötiloista alkaneissa paisunnoissa, vertailun Pactelin purkaus¬kokeesta saadulla massavirralla sekä osion, jossa analyyttiset mallit on yhdistetty kokonaiseen Pactelin APROS-malliin. Myös purkauksen kulkeutumista primääripiirissä on tarkasteltu. Simulaatiot vahvistavat, että versiolla 5.06 on vaikeuksia paineen laskennassa, kun paisunnan alkulämpötila on alle 30 ºC. Kehitysversiossa painekäyttäytyminen on selvästi parantunut, mutta versio kärsii ongelmista, jotka liittyvät kaasun lämpötilan painumiseen APROSin sisäisten rajoitusten alapuolelleja tätä kautta ongelmiin materiaali¬ominaisuuksien ennustamisessa. Tämän johdosta APROSin kehitysversio päätyy erilaisiin tuloksiin myös tilanteissa, joissa alkuperäinen 5.06 ei kärsi alhaisen lämpötilan ongelmista. Analyyttisistä malleista isentrooppinen malli päätyy antamaan säännönmukaisesti muita malleja ja versioita alempia paineita. Isoterminen malli sen sijaan näyttää päätyvän version 5.06 kanssa melko samankaltaisiin tuloksiin. On kuitenkin muistettava, että kummatkin analyyttiset mallit olettavat kaasun olevan kuivaa ja jättävät massasiirron faasien välillä kokonaan huomiotta.

Investigation ofsolid - state cooler based on electrocaloric effect

Electrocaloric cooling based on ability of material to change temperature by applying an electric field under adiabatic conditions is relatively new and challenging direction of ferroelectrics research. In this work we report about analytical, simulation and experimental data for BaSrTiO3 thin film and bulk ceramic samples. Detailed discussion of a theoretical base of the electrocaloric effect is included. Demonstrated experimental and computational results exemplify rational approach to a problem of solid-state cooler construction.

Kiinteistön ohjaus- ja valvontajärjestelmän toteutus mobiiliympäristöön

Ohjelmistoprojektin läpivienti vaatii suunnittelua ja yhteisiä tapaamisia toimittajan ja asiakkaan kesken. Ohjelmistotuotannon prosessit ovat määrittely, suunnittelu, toteutus, testaus ja käyttöönotto. Tärkeimmät dokumentit ovat projektisuunnitelma, toiminnallinen määrittely ja tekninen määrittely. Ongelmia projektin läpiviennissä voi tulla silloin, jos toimittaja ja asiakas eivät ymmärrä toisiaan. Tässä työssä tehdään SMSviestejä käsittelevä mobiilisovellus ja siihen liittyvät projektisuunnitelma sekä määrittelydokumentit. Mobiilisovellus ohjelmoidaan J2ME:llä, joka on sulautettujen järjestelmien ohjelmointiin suunniteltu Java-kieli. Sovellus tukee toisen asteen opiskelijoille suunnattuja mobiiliohjelmointi opintoja. Opintojakso kuuluu Pohjois- Karjalan ammattiopiston järjestämään turvallisuusalan koulutukseen. Sovelluksella voidaan lähettää ohjausviestejä OUMAN EH-60 -ohjaus- ja valvontayksikköön. Yksikön avulla voi ohjata ja valvoa esimerkiksi kiinteistön lämmönsäätöä, vesivahinkoja, oven lukitusta jne. Tässä työssä tehtävällä sovelluksella demonstroidaan kesämökin ohjausta. Langaton tiedonsiirto tulee tulevaisuudessa lisääntymään kiinteistöjen ohjaus- ja valvontajärjestelmänä. Hätä- ja valvontaviestit lähetetään automaattisesti kiinteistön omistajalle, hoivapalveluyrittäjälle, talohuoltoon tai hätäkeskukseen. Kiinteistön omistaja voi omalla matkapuhelimellaan ajasta ja paikasta riippumattavalvoa ja ohjata kiinteistöään reaaliaikaisesti. Pohjois-Karjalan ammattiopisto haluaa olla kehittämässä ja toteuttamassa turvallisuusalan koulutusta nyt ja tulevaisuudessa.

Continuous positive airway pressure causes lung injury in a model of sepsis.

Continuous positive airway pressure, aimed at preventing pulmonary atelectasis, has been used for decades to reduce lung injury in critically ill patients. In neonatal practice, it is increasingly used worldwide as a primary form of respiratory support due to its low cost and because it reduces the need for endotracheal intubation and conventional mechanical ventilation. We studied the anesthetized in vivo rat and determined the optimal circuit design for delivery of continuous positive airway pressure. We investigated the effects of continuous positive airway pressure following lipopolysaccharide administration in the anesthetized rat. Whereas neither continuous positive airway pressure nor lipopolysaccharide alone caused lung injury, continuous positive airway pressure applied following intravenous lipopolysaccharide resulted in increased microvascular permeability, elevated cytokine protein and mRNA production, and impaired static compliance. A dose-response relationship was demonstrated whereby higher levels of continuous positive airway pressure (up to 6 cmH(2)O) caused greater lung injury. Lung injury was attenuated by pretreatment with dexamethasone. These data demonstrate that despite optimal circuit design, continuous positive airway pressure causes significant lung injury (proportional to the airway pressure) in the setting of circulating lipopolysaccharide. Although we would currently avoid direct extrapolation of these findings to clinical practice, we believe that in the context of increasing clinical use, these data are grounds for concern and warrant further investigation.

Modeling of non-isothermalvapor membrane separation with thermodynamic models and generalized mass transfer equations

A rigorous unit operation model is developed for vapor membrane separation. The new model is able to describe temperature, pressure, and concentration dependent permeation as wellreal fluid effects in vapor and gas separation with hydrocarbon selective rubbery polymeric membranes. The permeation through the membrane is described by a separate treatment of sorption and diffusion within the membrane. The chemical engineering thermodynamics is used to describe the equilibrium sorption of vapors and gases in rubbery membranes with equation of state models for polymeric systems. Also a new modification of the UNIFAC model is proposed for this purpose. Various thermodynamic models are extensively compared in order to verify the models' ability to predict and correlate experimental vapor-liquid equilibrium data. The penetrant transport through the selective layer of the membrane is described with the generalized Maxwell-Stefan equations, which are able to account for thebulk flux contribution as well as the diffusive coupling effect. A method is described to compute and correlate binary penetrant¿membrane diffusion coefficients from the experimental permeability coefficients at different temperatures and pressures. A fluid flow model for spiral-wound modules is derived from the conservation equation of mass, momentum, and energy. The conservation equations are presented in a discretized form by using the control volume approach. A combination of the permeation model and the fluid flow model yields the desired rigorous model for vapor membrane separation. The model is implemented into an inhouse process simulator and so vapor membrane separation may be evaluated as an integralpart of a process flowsheet.

Induction motor versus permanent magnet synchronous motor in motion control applications: a comparative study

High dynamic performance of an electric motor is a fundamental prerequisite in motion control applications, also known as servo drives. Recent developments in the field of microprocessors and power electronics have enabled faster and faster movements with an electric motor. In such a dynamically demanding application, the dimensioning of the motor differs substantially from the industrial motor design, where feasible characteristics of the motor are for example high efficiency, a high power factor, and a low price. In motion control instead, such characteristics as high overloading capability, high-speed operation, high torque density and low inertia are required. The thesis investigates how the dimensioning of a high-performance servomotor differs from the dimensioning of industrial motors. The two most common servomotor types are examined; an induction motor and apermanent magnet synchronous motor. The suitability of these two motor types indynamically demanding servo applications is assessed, and the design aspects that optimize the servo characteristics of the motors are analyzed. Operating characteristics of a high performance motor are studied, and some methods for improvements are suggested. The main focus is on the induction machine, which is frequently compared to the permanent magnet synchronous motor. A 4 kW prototype induction motor was designed and manufactured for the verification of the simulation results in the laboratory conditions. Also a dynamic simulation model for estimating the thermal behaviour of the induction motor in servo applications was constructed. The accuracy of the model was improved by coupling it with the electromagnetic motor model in order to take into account the variations in the motor electromagnetic characteristics due to the temperature rise.

Rahavirta-analyysit, erityisesti kassavirtalaskelma, kunnan talouden ohjauksen apuvälineenä

 The aim of this research was to determine whether a cash basis financial statement would give additional value for the financial management of a local government and whether the cash flow statement would assist in getting a true and fair view of the financial position of the local government. The goal was to develop a cash flow statement and cash flow based key ratios for the needs of local government and the possibilities to utilise them were studied. In the theoretical part of this work, the literature review section,municipal economy, the main objectives and key ratios of financial control in municipal financial management, central control systems, control instruments and different financial statements were studied. In the empirical part the possibilities of utilising the information of these different financial statements as onecontrol instrument of municipal financial management were compared. Also empirical testing of the exploitation of these financial statements was carried out. The suggestion for municipal cash flow statement and its key ratios were defined on the basis of the theoretical and empirical parts. The results show that the municipal cash flow statement is most effective in a three-part form: cash flow from ordinary operations, cash flow from investments and funding cash flow. The added value of the cash flow statement comes from its ability to better attest the financial ability for investments better than the profit and loss account. Themunicipal cash flow statement is therefore especially suitable when analysing of the sufficiency of money. In addition to absolute ratios, such as the financial margin, also relative cash basis ratios such as the financial margin percentage, liquidity percentage and investment income financing percentage are important. Also the simple cash based calculation about receiving and using money is applicable to local governments. The statement could be a part of municipal financial statements, budgets and annual reports. On the other hand, working capital flow and expense and revenue flow statements do not give added value for municipal financial management.

Use of the heat dissipation method for sap flow measurement in citrus nursery trees1

Sap flow could be used as physiological parameter to assist irrigation of screen house citrus nursery trees by continuous water consumption estimation. Herein we report a first set of results indicating the potential use of the heat dissipation method for sap flow measurement in containerized citrus nursery trees. 'Valencia' sweet orange [Citrus sinensis (L.) Osbeck] budded on 'Rangpur' lime (Citrus limonia Osbeck) was evaluated for 30 days during summer. Heat dissipation probes and thermocouple sensors were constructed with low-cost and easily available materials in order to improve accessibility of the method. Sap flow showed high correlation to air temperature inside the screen house. However, errors due to natural thermal gradient and plant tissue injuries affected measurement precision. Transpiration estimated by sap flow measurement was four times higher than gravimetric measurement. Improved micro-probes, adequate method calibration, and non-toxic insulating materials should be further investigated.

Cell-Cell interaction in erythropoiesis: role of human monocytes

Erythroid burst forming units (BFU-E) are proliferative cells present in peripheral blood and bone marrow which may be precursors of the erythroid colony forming cell found in the bone marrow. To examine the possible role of monocyte-macrophages in the modulation of erythropoiesis, the effect of monocytes on peripheral blood BFU-E proliferation in response to erythropoietin was investigated in the plasma clot culture system. Peripheral blood mononuclear cells from normal human donors were separated into four fractions. Fraction-I cells were obtained from the interface of Ficoll-Hypaque gradients (20-30% monocytes; 60-80% lymphocytes); fraction-II cells were fraction-I cells that were nonadherent to plastic (2-10% monocytes; 90-98% lymphocytes); fraction-III cells were obtained by incubation of fraction-II cells with carbonyl iron followed by Ficoll-Hypaque centrifugation (>99% lymphocytes); and fraction-IV cells represented the adherent population of fraction-II cells released from the plastic by lidocaine (>95% monocytes). When cells from these fractions were cultured in the presence of erythropoietin, the number of BFU-E-derived colonies was inversely proportional to the number of monocytes present (r = ¿0.96, P < 0.001). The suppressive effect of monocytes on BFU-E proliferation was confirmed by admixing autologous purified monocytes (fraction-IV cells) with fraction-III cells. Monocyte concentrations of ¿20% completely suppressed BFU-E activity. Reduction in the number of plated BFU-E by monocyte dilution could not account for these findings: a 15% reduction in the number of fraction-III cells plated resulted in only a 15% reduction in colony formation. These results indicate that monocyte-macrophages may play a significant role in the regulation of erythropoiesis and be involved in the pathogenesis of the hypoproliferative anemias associated with infection and certain neoplasia in which increased monocyte activity and monopoiesis also occur.

1.48 and 1.84 µm thulium emissions in monoclinic KGd(WO4)2 single crystals

By exciting at 788 nm, we have characterized the near infrared emissions of trivalent thulium ions in monoclinic KGd(WO4)2 single crystals at 1.48 and 1.84 mm as a function of dopant concentration from 0.1% to 10% and temperature from 10 K to room temperature. We used the reciprocity method to calculate the maximum emission cross-section of 3.0310220 cm2 at 1.838 mm for the polarization parallel to the Nm principal optical direction. These results agrees well with the experimental data. Experimental decay times of the 3H4!3F4 and 3F4!3H6 transitions have been measured as a function of thulium concentration.

Lämmöntalteenottokattilan dynaaminen simulointimalli

Työssä mallinnettiin kombivoimalaitoksen lämmöntalteenottokattila Apros-simulointiohjelmalla. Simulointimalli valmistettiin vastaamaan Helsingin Energian Vuosaari B:n voimalaitoksen lämmöntalteenottokattilaa, joka toimii kahdella painetasolla. Kattila on Foster Wheelerin valmistama. Ennen mallinnuksen aloittamista tutustuttiin laitoksen termodynamiikkaan, jolloin saatiin riittävä teoreettinen tieto koko laitoksen toiminnasta. Kattilan reunaehtoina ovat kaasuturbiiniprosessi ja laitoksen höyrykierto. Kaasuturbiini korvattiin laskentayhtälöillä, jotka antavat alkuarvot mm. savukaasun massavirralle ja lämpötilalle ennen kattilaa kaasuturbiinin tehon funktiona. Kattila liitetään höyrykiertoon tuorehöyry- ja syöttövesilinjasta, jolloin reunaehtoina annetaan lämpötilat ja paineet massavirroille. Valmistettua mallia testattiin ylösajo- ja kuormanmuutostilanteessa. Ylösajotilanteessa saatuja laskentatuloksia verrattiin todellisen laitoksen mittaustuloksiin, jolloin varmistuttiin simulointimallin oikeasta fysikaalisesta toiminnasta. Kuormanmuutostilanteissa kaasuturbiinin tehoa muutettiin ja samalla seurattiin kattilan reagointia muutostilanteessa. Kuormanmuutosmittauksessa varmistettiin vielä, että kattila reagoi kuormanmuutokseen oikealla tavalla, eikä muutos aiheuta kattilan toiminnalle haitallista värähtelyä.

Study of seawater biofiltration by measuring adenosine triphosphate (ATP) and turbidity

In the present study, we examined seawater biofiltration in terms of adenosine triphosphate (ATP) and turbidity. A pilot biofilter continuously fed with fresh seawater reduced both turbidity and biological activity measured by ATP. Experiments operated with an empty bed contact time (EBCT) of between 2 and 14 min resulted in cellular ATP removals of 32% to 60% and turbidity removals of 38% to 75%. Analysis of the water from backwashing the biofilter revealed that the first half of the biofilter concentrated around 80% of the active biomass and colloidal material that produces turbidity. By reducing the EBCT, the biological activity moved from the first part of the biofilter to the end. Balances of cellular ATP and turbidity between consecutive backwashings indicated that the biological activity generated in the biofilter represented more than 90% of the detached cellular ATP. In contrast, the trapped ATP was less than 10% of the overall cellular ATP detached during the backwashing process. Furthermore, the biological activity generated in the biofilter seemed to be more dependent on the elapsed time than the volume filtered. In contrast, the turbidity trapped in the biofilter was proportional to the volume filtered, although a slightly higher amount of turbidity was found in the backwashing water; this was probably due to attrition of the bed medium. Finally, no correlations were found between turbidity and ATP, indicating that the two parameters focus on different matter. This suggests that turbidity should not be used as an alternative to cellular concentration.