Nonlinear behavior of gelatin networks reveals a hierarchical structure

We investigate the strain hardening behavior of various gelatin networks-namely physical gelatin gel, chemically cross-linked gelatin gel, and a hybrid gel made of a combination of the former two-under large shear deformations using the pre-stress, strain ramp, and large amplitude oscillations shear protocols. Further, the internal structures of physical gelatin gels and chemically cross-linked gelatin gels were characterized by small angle neutron scattering (SANS) to enable their internal structures to be correlated with their nonlinear rheology. The Kratky plots of SANS data demonstrate the presence of small cross-linked aggregates within the chemically cross-linked network whereas, in the physical gelatin gels, a relatively homogeneous structure is observed. Through model fitting to the scattering data, we were able to obtain structural parameters, such as the correlation length (ξ), the cross-sectional polymer chain radius (Rc) and the fractal dimension (df) of the gel networks. The fractal dimension df obtained from the SANS data of the physical and chemically cross-linked gels is 1.31 and 1.53, respectively. These values are in excellent agreement with the ones obtained from a generalized nonlinear elastic theory that has been used to fit the stress-strain curves. The chemical cross-linking that generates coils and aggregates hinders the free stretching of the triple helix bundles in the physical gels.

A informação e a comunicação na escola: tecnologias, redes e fluxos

Tese de Doutoramento em Estudos da Criança (Especialidade de Tecnologias de Informação e Comunicação)

Evolution of the gene regulatory network controlling flower dorsoventral asymmetry

Tese de Doutoramento em Biologia de Plantas.

A cooperação transfronteiriça como oportunidade de desenvolvimento das regiões de fronteira. Da Raia Ibérica à euroregião Galiza-Norte de Portugal

Tese de Doutoramento em Geografia Humana.

Development of an intelligent earthwork optimization system

Tese de Doutoramento em Engenharia Civil.

Estimativa dos parâmetros de compactação de solos usando técnicas de data mining

Dissertação de mestrado integrado em Engenharia Civil

A crise da indústria da cultura: visões de Adorno e de Attali sobre a música contemporânea

Dissertação de mestrado em Comunicação, Arte e Cultura

Extremely strong and tough hydrogels as prospective candidates for tissue repair – A review

Ideal candidates for the repair of robust biological tissues should exhibit diverse features such as biocompatibility, strength, toughness, self-healing ability and a well-defined structure. Among the available biomaterials, hydrogels, as highly hydrated 3D-crosslinked polymeric networks, are promising for Tissue Engineering purposes as result of their high resemblance with native extracellular matrix. However, these polymeric structures often exhibit a poor mechanical behavior, hampering their use in load-bearing applications. During the last years, several efforts have been made to create new strategies and concepts to fabricate strong and tough hydrogels. Although it is already possible to shape the mechanical properties of artificial hydrogels to mimic biotissues, critical issues regarding, for instance, their biocompatibility and hierarchical structure are often neglected. Therefore, this review covers the structural and mechanical characteristics of the developed methodologies to toughen hydrogels, highlighting some pioneering efforts employed to combine the aforementioned properties in natural-based hydrogels.

Highly robust chitosan hydrogels via a fast, simple and biocompatible dual crosslinking-based process

Load-bearing soft tissues such as cartilage, blood vessels and muscles are able to withstand a remarkable compressive stress of several MPa without fracturing. Interestingly, most of these structural tissues are mainly composed of water and in this regard, hydrogels, as highly hydrated 3D-crosslinked polymeric networks, constitute a promising class of materials to repair lesions on these tissues. Although several approaches can be employed to shape the mechanical properties of artificial hydrogels to mimic the ones found on biotissues, critical issues regarding, for instance, their biocompatibility and recoverability after loading are often neglected. Therefore, an innovative hydrogel device made only of chitosan (CHI) was developed for the repair of robust biological tissues. These systems were fabricated through a dual-crosslinking process, comprising a photo- and an ionic-crosslinking step. The obtained CHIbased hydrogels exhibited an outstanding compressive strength of ca. 20 MPa at 95% of strain, which is several orders of magnitude higher than those of the individual components and close to the ones found in native soft tissues. Additionally, both crosslinking processes occur rapidly and under physiological conditions, enabling cellsâ encapsulation as confirmed by high cell survival rates (ca. 80%). Furthermore, in contrast with conventional hydrogels, these networks quickly recover upon unloading and are able to keep their mechanical properties under physiological conditions as result of their non-swell nature.

Production of whey protein-based aggregates under ohmic heating

Formation of whey protein isolate protein aggregates under the influence of moderate electric fields upon ohmic heating (OH) has been monitored through evaluation of molecular protein unfolding, loss of its solubility, and aggregation. To shed more light on the microstructure of the protein aggregates produced by OH, samples were assayed by transmission electron microscopy (TEM). Results show that during early steps of an OH thermal treatment, aggregation of whey proteins can be reduced with a concomitant reduction of the heating chargeby reducing the come-up time (CUT) needed to reach a target temperatureand increase of the electric field applied (from 6 to 12 V cm1). Exposure of reactive free thiol groups involved in molecular unfolding of -lactoglobulin (-lg) can be reduced from 10 to 20 %, when a CUT of 10 s is combined with an electric field of 12 V cm1. Kinetic and multivariate analysis evidenced that the presence of an electric field during heating contributes to a change in the amplitude of aggregation, as well as in the shape of the produced aggregates. TEM discloses the appearance of small fibrillar aggregates upon the influence of OH, which have recognized potential in the functionalization of food protein networks. This study demonstrated that OH technology can be used to tailor denaturation and aggregation behavior of whey proteins due to the presence of a constant electric field together with the ability to provide a very fast heating, thus overcoming heat transfer limitations that naturally occur during conventional thermal treatments.

Construção de uma cultura de projeto numa comunidade de aprendizagem através do projeto curricular integrado

Dissertação de mestrado em Estudos da Criança (área de especialização em Integração Curricular e Inovação Educativa)

Hierarchical modelling of timber reference properties using probabilistic methods: Maximum Likelihood Method, Bayesian Methods and Probability Networks

In recent decades, an increased interest has been evidenced in the research on multi-scale hierarchical modelling in the field of mechanics, and also in the field of wood products and timber engineering. One of the main motivations for hierar-chical modelling is to understand how properties, composition and structure at lower scale levels may influence and be used to predict the material properties on a macroscopic and structural engineering scale. This chapter presents the applicability of statistic and probabilistic methods, such as the Maximum Likelihood method and Bayesian methods, in the representation of timber’s mechanical properties and its inference accounting to prior information obtained in different importance scales. These methods allow to analyse distinct timber’s reference properties, such as density, bending stiffness and strength, and hierarchically consider information obtained through different non, semi or destructive tests. The basis and fundaments of the methods are described and also recommendations and limitations are discussed. The methods may be used in several contexts, however require an expert’s knowledge to assess the correct statistic fitting and define the correlation arrangement between properties.

Quantifying the risk of coronary artery disease in a community: The Bambuí Project

OBJECTIVE: To determine the coronary risk profile in adults and elderly in a community. METHODS: The study comprised a sample of adults (30-59 years, n=547) and the entire elderly population (60-74 years, n=1165) residing in Bambuí town, Brazil. The Framingham score based on sex, age, smoking, diabetes mellitus, systolic and diastolic blood pressure, total cholesterol, and HDL-C was used. The score based on age and sex was defined as "expected" and compared with the mean score obtained by the sum of all risk factors in each age group and sex (score "observed"). RESULTS: The difference between the scores "observed" and "expected" increased with aging in both sexes. Smoking increased the difference from 30 years of age onwards, in both sexes, and hypertension was important in men above the age of 30 years and in women above the age of 50 years. Diabetes and elevated total cholesterol increased the risk of the disease above the age of 50 years in both sexes. A higher level of HDL-C reduced the risk among men above the age of 30 years, with no significant difference among women. Less schooling (< 4 years versus ³ 4 years) was associated with a higher score in adults of both sexes, but not among the elderly. CONCLUSION: Based on these results, in the community studied, the risk of coronary artery disease may be reduced up to 44% in men and 38% in women.

Asociatividad y redes interorganizacionales. El caso de la Red Social de la 5ta. Associativity and interorganizational networks. The case of the Social Network of "la 5ta".

En investigaciones anteriores el equipo trabajó sobre el concepto de asociatividad en las prácticas de emprendimientos socioeconómicos y cooperativas surgidos luego de la crisis del 2001 en Argentina. Las conclusiones de dichas investigaciones se agrupan en dos categorías. La primera identifica como un obstáculo importante para generar y sostener la asociatividad, al elevado grado de desconfianza y fragmentación del tejido social, que dificulta la conformación de formas organizacionales asociativas más allá de las emprendidas por personas vinculadas por lazos afectivos previos. La segunda categoría de conclusiones corresponde a las dificultadas asociadas a los niveles de formalidad requeridos por las políticas públicas que promueven la constitución de formas asociativas.Sobre estos antecedentes se propone el análisis otras formas asociativas de mayor envergadura tales como las redes interorganizacionales, que superan la asociatividad entre individuos e incluyen a diversas organizaciones (de la sociedad civil, actores estatales, instituciones educativas, cooperativas, etc.). Estas redes, que incluyen a las formas asociativas estudiadas anteriormente por el equipo, se diferencian de ellas en que los vínculos trascienden el contexto primario de los actores, no necesariamente se asientan sobre estructuras de coordinación formales y cuentan con una cierta trayectoria de construcción colectiva que sirve de base y sustento a proyectos sociales en sectores de alta vulnerabilidad. El objetivo de la investigación es describir y analizar las características de la asociatividad en una de estas redes existente en la ciudad de Córdoba, en especial en lo que hace al diseño organizacional y funcionamiento asociativo, identificando el proceso de incidencia de la misma en políticas públicas y los factores que favorecen y obstaculizan ese proceso. La metodología consiste en la construcción conjunta, con los propios actores, de los problemas de investigación para desde allí comprender y sistematizar sus propias prácticas con el objetivo de generar un conocimiento capaz de potenciar su dinámica y enriquecer la construcción teórica en torno a estas formas organizacionales. La red elegida es la Red Social de la 5ta, compuesta por alrededor de 30 organizaciones entre las que se cuentan OSC y organismos públicos de distintos niveles (provincial y municipal). Funciona desde el año 1998 en la zona sudeste de la ciudad de Córdoba uno de los sectores que concentra los índices más altos de pobreza y morbilidad y mortalidad materno infantil de la ciudad. El deterioro de la situación económica y el progresivo abandono del Estado han convertido gran parte de la zona donde se articula la Red en una zona marginal, adjudicataria en el imaginario público del estigma de peligrosidad. En este marco, el objetivo de la Red es mejorar a calidad de vida de la comunidad a través de acciones conjuntas y del establecimiento de acuerdos con otros actores institucionales.

Coordinación socio-política. Redes de influencia y estructuras de poder en CórdobaSocio-political coordination. Influence Networks and power structures in Córdoba.

Los mecanismos de producción y reproducción de la influencia política es una importante área de estudio de la ciencia política en las últimas décadas. En la misma se han disputado diferentes teorías, desde las que plantean la influencia predominante de grupos de poder y sectores corporativos tanto en las decisiones del estado como en las no decisiones, hasta los que plantean que existe la puja de diferentes intereses dentro del Estado pero que no existe ningún grupo predominante. El análisis de redes (network analysis) permite estudiar este objeto mediante la observación de la estructura de relaciones de los actores influyentes dentro de la política provincial. En esta area de estudio, este proyecto propone estudiar de qué manera se produce y reproduce la influencia política en la Provincia de Córdoba.Las hipótesis que plantea el proyecto son las siguientes: H1- La estructura del poder socio-político provincial adquiere una configuración reticular en la que existe un núcleo de actores que representan intereses tradicionales organizados y permite un escaso acceso de nuevas organizaciones que defienden intereses sociales difusos. H2- En el proceso de influencia sociopolítica provincial operan mecanismos de influencia interpersonales directos e indirectos (Brokerage) que permiten a los actores acceder e influir en los decisores públicos. H3- En el proceso de influencia socio-política interviene una diversidad de recursos de poder que los actores utilizan para influir las políticas públicas. Para esto se propone como objetivos del proyecto los siguientes: 1- Identificar y analizar la estructura de poder e influencia que subyace a la política provincial. 2- Analizar los intereses, actores y sectores incluidos y excluidos de la estructura de influencia política. 3- Analizar los mecanismos y recursos de producción y reproducción del poder y la influencia. 4- Analizar las áreas de política del estado provincial que resultan lugar de influencia de los actores y sectores que configuran la estructura de poder socio-política. 5- Analizar el sistema de decisión colectiva (policy domain) en dos áreas de política provincial. 6- Analizar los recursos que posibilitan a los actores ejercer poder e influencia en las áreas de políticas estudiadas. Para la verificación empírica de las hipótesis se realiza un diseño de investigación que incluye el mapeo y análisis de dos tipos de redes políticas diferentes, la "red de influencia en la política provincial" y la red de influencia en un "área de políticas públicas". La reconstrucción de las redes políticas se realizará mediante entrevistas semi-estructuradas a actores sociales y políticos en un muestreo no probabilístico de tipo "bola de nieve". La investigación pretende realizar un aporte a la comprensión de la coordinación política y, en tal sentido, espera alcanzar una adecuada descripción y comprensión de los procesos de influencia y de estructuración del poder en la Provincia de Córdoba.