Güler and Öngel v Turkey: Article 3 of the European Convention on Human Rights and Strasbourg’s discourse on the justified use of force

This article discusses the discourse on the justified use of force in the Strasbourg Court’s analysis of Article 3. With particular focus on the judgment in Güler and Öngel v Turkey, a case concerning the use of force by State agents against demonstrators, it addresses the question of the implications of such discourse, found in this and other cases, on the absolute nature of Article 3. It offers a perspective which suggests that the discourse on the justified use of force can be reconciled with Article 3’s absolute nature.

A Mild New Method for the C-Acylation of Ketone Enolates. A Convenient Synthesis of β-Keto Esters, -Thionoesters and Thioesters

Abstract image.

A new method for ketone enolate C-acylation is described which utilizes alkyl pentafluorophenylcarbonates, thiocarbonates and thionocarbonates as the reactive acylating agents, and MgBr2.Et2O, DMAP and i-Pr2NEt as the reagents for enolization. A wide range of ketones have been observed to undergo clean C-acylation via this protocol.

Human Rights in Northern Ireland 2009-10

This report surveys the legislative and judicial developments in human rights law within Northern Ireland in the years 2009 and 2010, highlighting the respects in which the law was or was not in compliance with international human rights standards, in particular those laid down in the European Convention on Human Rights.

Hydroclimatic shifts in northeast Thailand during the last two millennia - the record of Lake Pa Kho

The Southeast Asian mainland is located in the central path of the Asian summer monsoon, a region where paleoclimatic data are still sparse. Here we present a multi-proxy (TOC, C/N, δ¹³C, biogenic silica, and XRF elemental data) study of a 1.5m sediment/peat sequence from Lake Pa Kho, northeast Thailand, which is supported by 20 AMS ¹⁴C ages. Hydroclimatic reconstructions for Pa Kho suggest a strengthened summer monsoon between BC 170-AD 370, AD 800-960, and after AD 1450; and a weakening of the summer monsoon between AD 370-800, and AD 1300-1450. Increased run-off and a higher nutrient supply after AD 1700 can be linked to agricultural intensification and land-use changes in the region. This study fills an important gap in data coverage with respect to summer monsoon variability over Southeast Asia during the past 2000 years and enables the mean position of the Intertropical Convergence Zone (ITCZ) to be inferred based on comparisons with other regional studies. Intervals of strengthened/weaker summer monsoon rainfall suggest that the mean position of the ITCZ was located as far north as 35°N between BC 170-AD 370 and AD 800-960, whereas it likely did not reach above 17°N during the drought intervals of AD 370-800 and AD 1300-1450. The spatial pattern of rainfall variation seems to have changed after AD 1450, when the inferred moisture history for Pa Kho indicates a more southerly location of the mean position of the summer ITCZ.

PREDICTING THE SPATIAL-DISTRIBUTION OF CLIMATE - TEMPERATURE IN GREAT-BRITAIN

1. The prediction and mapping of climate in areas between climate stations is of increasing importance in ecology.

2. Four categories of model, simple interpolation, thin plate splines, multiple linear regression and mixed spline-regression, were tested for their ability to predict the spatial distribution of temperature on the British mainland. The models were tested by external cross-verification.

3. The British distribution of mean daily temperature was predicted with the greatest accuracy by using a mixed model: a thin plate spline fitted to the surface of the country, after correction of the data by a selection from 16 independent topographical variables (such as altitude, distance from the sea, slope and topographic roughness), chosen by multiple regression from a digital terrain model (DTM) of the country.

4. The next most accurate method was a pure multiple regression model using the DTM. Both regression and thin plate spline models based on a few variables (latitude, longitude and altitude) only were comparatively unsatisfactory, but some rather simple methods of surface interpolation (such as bilinear interpolation after correction to sea level) gave moderately satisfactory results. Differences between the methods seemed to be dependent largely on their ability to model the effect of the sea on land temperatures.

5. Prediction of temperature by the best methods was greater than 95% accurate in all months of the year, as shown by the correlation between the predicted and actual values. The predicted temperatures were calculated at real altitudes, not subject to sea-level correction.

6. A minimum of just over 30 temperature recording stations would generate a satisfactory surface, provided the stations were well spaced.

7. Maps of mean daily temperature, using the best overall methods are provided; further important variables, such as continentality and length of growing season, were also mapped. Many of these are believed to be the first detailed representations at real altitude.

8. The interpolated monthly temperature surfaces are available on disk.

Nucleoside Azide-Alkyne Cycloaddition Reactions Under Solvothermal Conditions or Using Copper Vials in a Ball Mill

Novel nucleoside analogues containing photoswitchable moieties were prepared using 'click' cycloaddition reactions between 5 '-azido-5 '-deoxythymidine and mono- or bis-N-propargylamide-substituted azobenzenes. In solution, high to quantitative yields were achieved using 5mol% Cu(I) in the presence of a stabilizing ligand. 'Click' reactions using the monopropargylamides were also effected in the absence of added cuprous salts by the application of liquid assisted grinding (LAG) in metallic copper reaction vials. Specifically, high speed vibration ball milling (HSVBM) using a 3/32('') (2.38mm) diameter copper ball (62mg) at 60Hz overnight in the presence of ethyl acetate lead to complete consumption of the 5 '-azido nucleoside with clean conversion to the corresponding 1,3-triazole.

Impact of Free Glasses and a Teacher Incentive on Children's Use of Eyeglasses: A Cluster-Randomized Controlled Trial.

Purpose: To study the effect of free glasses combined with teacher incentives on in-school glasses wear among Chinese urban migrant children. Design: Cluster-randomized controlled trial. Methods: Children with VA <= 6/12 in either eye due to refractive error in 94 randomly-chosen primary schools underwent randomization by school to receive free glasses, education on their use and a teacher incentive (Intervention), or glasses prescriptions only (Control). Intervention group teachers received a tablet computer if >= 80% of children given glasses wore them during un-announced visits 6 weeks and 6 months (main outcome) after intervention. Results: Among 4376 children, 728 (16.7%, mean age 10.9 years, 51.0% boys) met enrollment criteria and were randomly allocated, 358 (49.2%, 47 schools) to Intervention and 370 (50.8%, 47 schools) to Control. Among these, 693 children (95.2%) completed the study and underwent analysis. Spectacle wear was significantly higher at 6 months among Intervention children (Observed [main outcome]: 68.3% versus 23.9%, Adjusted Odds Ratio [OR]=11.5, 95% Confidence Interval [CI] 5.91-22.5, P<0.001; Self-reported: 90.6% versus 32.1%, OR = 43.7, 95% CI = 21.7-88.5, P < 0.001). Other predictors of observed wear at 6 months included baseline spectacle wear (P<0.001), uncorrected VA<6/18 (P=0.01) and parental spectacle wear (P=0.02). The 6-month observed wear rate was only 41% among similar-aged children provided free glasses in our previous trial without teacher incentives. Conclusions: Free spectacles and teacher incentives maintain classroom wear in the large majority of children needing glasses over a school year. Low wear among Control children demonstrates the need for interventions.

Isolation and characterization of thirty microsatellite loci for Atlantic mackerel (Scomber scombrus L.)

Atlantic mackerel (Scomber scombrus L.) is a widely distributed commercially important pelagic species. Little is known about the stock structure of this species, but it is thought to be undergoing a range extension due to environmental changes. Knowledge of the stock structure under these changing conditions is fundamental for effective management. In this paper, 30 highly polymorphic microsatellite loci developed with next generation sequencing are described. The number of alleles per locus ranged from 4 to 39 in two geographically distant populations, observed and expected heterozygosities ranged between 0. 370-0. 978 and 0. 426-0. 962, respectively. These loci are an important resource that will allow assessment of the current population genetic structure of this species, and enable monitoring of climate related changes in the species range and distribution. 

FPGA based Streaming Image Processing Processor (SIPPro) architecture to accelerate data intensive applications

Current data-intensive image processing applications push traditional embedded architectures to their limits. FPGA based hardware acceleration is a potential solution but the programmability gap and time consuming HDL design flow is significant. The proposed research approach to develop “FPGA based programmable hardware acceleration platform” that uses, large number of Streaming Image processing Processors (SIPPro) potentially addresses these issues. SIPPro is pipelined in-order soft-core processor architecture with specific optimisations for image processing applications. Each SIPPro core uses 1 DSP48, 2 Block RAMs and 370 slice-registers, making the processor as compact as possible whilst maintaining flexibility and programmability. It is area efficient, scalable and high performance softcore architecture capable of delivering 530 MIPS per core using Xilinx Zynq SoC (ZC7Z020-3). To evaluate the feasibility of the proposed architecture, a Traffic Sign Recognition (TSR) algorithm has been prototyped on a Zedboard with the color and morphology operations accelerated using multiple SIPPros. Simulation and experimental results demonstrate that the processing platform is able to achieve a speedup of 15 and 33 times for color filtering and morphology operations respectively, with a significant reduced design effort and time.

Adaptation and Evaluation of the Neighborhood Environment Walkability Scale in India (NEWS-India)

Physical inactivity is the fourth leading risk factor for global mortality, with most of these deaths occurring in low and middle-income countries (LMICs) like India. Research from developed countries has consistently demonstrated associations between built environment features and physical activity levels of populations. The development of culturally sensitive and reliable measures of the built environment is a necessary first step for accurate analysis of environmental correlates of physical activity in LMICs. This study systematically adapted the Neighborhood Environment Walkability Scale (NEWS) for India and evaluated aspects of test-retest reliability of the adapted version among Indian adults. Cultural adaptation of the NEWS was conducted by Indian and international experts. Semi-structured interviews were conducted with local residents and key informants in the city of Chennai, India. At baseline, participants (N = 370; female = 47.2%) from Chennai completed the adapted NEWS-India surveys on perceived residential density, land use mix-diversity, land use mix-access, street connectivity, infrastructure and safety for walking and cycling, aesthetics, traffic safety, and safety from crime. NEWS-India was administered for a second time to consenting participants (N = 62; female = 53.2%) with a gap of 2–3 weeks between successive administrations. Qualitative findings demonstrated that built environment barriers and constraints to active commuting and physical activity behaviors intersected with social ecological systems. The adapted NEWS subscales had moderate to high test-retest reliability (ICC range 0.48–0.99). The NEWS-India demonstrated acceptable measurement properties among Indian adults and may be a useful tool for evaluation of built environment attributes in India. Further adaptation and evaluation in rural and suburban settings in India is essential to create a version that could be used throughout India.

Relação homem e atmosfera sob a objectiva de novas tecnologias

Os métodos volumétricos de recolha de amostras de ar constituem os métodos dominantes atualmente para a monitorização de aeroalergenos, sendo a metodologia “Hírst” a dominante para a monitorização do pólen atmosférico. Recentemente têm surgido alguns avanços metodológicos nesta área combinando tecnologias bioquímicas e imunológicas pelo que se empreendeu este estudo a fim de comparar uma tecnologia “Ciclone”, desenvolvida no âmbito de um projeto europeu do programa LIFE (LIFE05 ENV/F/000068), com o referido método padrão quanto à eficiência de captação do pólen atmosférico e à deteção de aeroalergenos polínicos. Métodos: Foram efetuadas amostragens do conteúdo polínico atmosférico dos períodos de polinização dos anos 2006 e 2007 mediante um coletor tipo “Hirst” (Burkard® Seven Day Recording Volumetric Spore Trap®) e um coletor tipo “Ciclone” (AeoluS®, Coriolis ® da Bertin Technologies), colocados lado a lado. Foram instalados sobre uma plataforma meteorológica situada no centro da cidade de Évora, 17m acima do nível do solo. As amostras foram analisadas de acordo com os protocolos estabelecidos para cada método. De forma complementar foi realizada uma correlação dos dados obtidos com os registos de inquéritos sintomatológicos efetuados por voluntários das consultas externas de Imunoalergologia do hospital do Espírito Santo em Évora. Todos aqueles que apresentaram queixas respiratórias durante 0 período primaveril efetuaram testes cutâneos em “Prick” modificado aos aeroalergenos mais frequentes na região, a fim de se determinar o respetivo Perl de sensibilidades. Resultados: Esperou-se com este estudo testar a eficácia de uma nova metodologia para deteção e análise de bioaerossóis, comparativamente com a metodologia padrão e com a sua relação sintomatologia atópica respiratória. /ABSTRACT - Nowadays volumetric methods for bioaerosols sampling constitute the main methods to monitor the aeroallergens whereas “Hirst" methodology is the most dominant method to monitor airborne pollen. Recently some methodological advances have been introduced in this area matching biochemical and immunological technologies and so a study was accomplished in order to compare a "Cyclone” technology, developed under the scope of a European project - the LFE program -, with the mentioned standard method in terms of efficiency of airborne pollen sampling and detection of aeroallergens. Methods: Air samples from the outdoor environment were collected during the pollination period, along the year 2006 and 2007 with a "Hirst"-t3pe collector (Burkard® Seven Day Recording Volumetric Spore Trap®) and a "Cyclone"-type collector (Aeolus®, Coriolis® Bertin Technologies), placed side by side. They were installed on a meteorological platform situated at the center of Évora, 17m above ground level. Samples were analyzed according to the established protocols by each method. In a complementary way a data correlation was done between the symptomatologic inquiries fiom volunteers of the Immunoallergology external consultations at the Hospital Espírito Santo, in Évora. Everyone declaring breathing complaints during the spring season had done modified skin 'Trick" tests to the most usual aeroallergens of the region Results: It is waited from this study to test the efficiency of a new methodology for detection and analysis of bioaerossols, comparatively with the standard methodology and and its relation with the atopic simptomatologic breathing

Severe plastic deformation of Al–Zn alloys

In this work, the R&D work mainly focused on the mechanical and microstructural analysis of severe plastic deformation (SPD) of Al–Zn alloys and the development of microstructure–based models to explain the observed behaviors is presented. Evolution of the microstructure and mechanical properties of Al–30wt% Zn alloy after the SPD by the high–pressure torsion (HPT) has been investigated in detail regarding the increasing amount of deformation. SPD leads to the gradual grain refinement and decomposition of the Al–based supersaturated solid solution. The initial microstructure of the Al–30wt% Zn alloy contains Al and Zn phases with grains sizes respectively of 15 and 1 micron. The SPD in compression leads to a gradual decrease of the Al and Zn phase grain sizes down to 4 microns and 252 nm, respectively, until a plastic strain of 0.25 is reached. At the same time, the average size of the Zn particles in the bulk of the Al grains increases from 20 to 60 nm and that of the Zn precipitates near or at the grain boundaries increases as well. This microstructure transformation is accompanied at the macroscopic scale by a marked softening of the alloy. The SPD produced by HPT is conducted up to a shear strain of 314. The final Al and Zn grains refine down to the nanoscale with sizes of 370 nm and 170 nm, respectively. As a result of HPT, the Zn–rich (Al) supersaturated solid solution decomposes completely and reaches the equilibrium state corresponding to room temperature and its leads to the material softening. A new microstructure–based model is proposed to describe the softening process occurring during the compression of the supersaturated Al–30wt% Zn alloy. The model successfully describes the above–mentioned phenomena based on a new evolution law expressing the dislocation mean free path as a function of the plastic strain. The softening of the material behavior during HPT process is captured very well by the proposed model that takes into consideration the effects of solid solution hardening and its decomposition, Orowan looping and dislocation density evolution. In particular, it is demonstrated that the softening process that occurs during HPT can be attributed mainly to the decomposition of the supersaturated solid solution and, in a lesser extent, to the evolution of the dislocation mean free path with plastic strain.