Birnbaum-Saunders nonlinear regression models

We introduce, for the first time, a new class of Birnbaum-Saunders nonlinear regression models potentially useful in lifetime data analysis. The class generalizes the regression model described by Rieck and Nedelman [Rieck, J.R., Nedelman, J.R., 1991. A log-linear model for the Birnbaum-Saunders distribution. Technometrics 33, 51-60]. We discuss maximum-likelihood estimation for the parameters of the model, and derive closed-form expressions for the second-order biases of these estimates. Our formulae are easily computed as ordinary linear regressions and are then used to define bias corrected maximum-likelihood estimates. Some simulation results show that the bias correction scheme yields nearly unbiased estimates without increasing the mean squared errors. Two empirical applications are analysed and discussed. Crown Copyright (C) 2009 Published by Elsevier B.V. All rights reserved.

Bias correction in a multivariate normal regression model with general parameterization

This paper derives the second-order biases Of maximum likelihood estimates from a multivariate normal model where the mean vector and the covariance matrix have parameters in common. We show that the second order bias can always be obtained by means of ordinary weighted least-squares regressions. We conduct simulation studies which indicate that the bias correction scheme yields nearly unbiased estimators. (C) 2009 Elsevier B.V. All rights reserved.

Local power of some tests in exponential family nonlinear models

In this paper we obtain asymptotic expansions up to order n(-1/2) for the nonnull distribution functions of the likelihood ratio, Wald, score and gradient test statistics in exponential family nonlinear models (Cordeiro and Paula, 1989), under a sequence of Pitman alternatives. The asymptotic distributions of all four statistics are obtained for testing a subset of regression parameters and for testing the dispersion parameter, thus generalising the results given in Cordeiro et al. (1994) and Ferrari et al. (1997). We also present Monte Carlo simulations in order to compare the finite-sample performance of these tests. (C) 2010 Elsevier B.V. All rights reserved.

Residual-based test for Nonlinear Cointegration with application in PPPs

Nested by linear cointegration first provided in Granger (1981), the definition of nonlinear cointegration is presented in this paper. Sequentially, a nonlinear cointegrated economic system is introduced. What we mainly study is testing no nonlinear cointegration against nonlinear cointegration by residual-based test, which is ready for detecting stochastic trend in nonlinear autoregression models. We construct cointegrating regression along with smooth transition components from smooth transition autoregression model. Some properties are analyzed and discussed during the estimation procedure for cointegrating regression, including description of transition variable. Autoregression of order one is considered as the model of estimated residuals for residual-based test, from which the teststatistic is obtained. Critical values and asymptotic distribution of the test statistic that we request for different cointegrating regressions with different sample sizes are derived based on Monte Carlo simulation. The proposed theoretical methods and models are illustrated by an empirical example, comparing the results with linear cointegration application in Hamilton (1994). It is concluded that there exists nonlinear cointegration in our system in the final results.

Testing common nonlinear features in vector nonlinear autoregressive models

This paper studies a special class of vector smooth-transition autoregressive (VSTAR) models that contains common nonlinear features (CNFs), for which we proposed a triangular representation and developed a procedure of testing CNFs in a VSTAR model. We first test a unit root against a stable STAR process for each individual time series and then examine whether CNFs exist in the system by Lagrange Multiplier (LM) test if unit root is rejected in the first step. The LM test has standard Chi-squared asymptotic distribution. The critical values of our unit root tests and small-sample properties of the F form of our LM test are studied by Monte Carlo simulations. We illustrate how to test and model CNFs using the monthly growth of consumption and income data of United States (1985:1 to 2011:11).

Forecasting with Vector Nonlinear Time Series Models

This work concerns forecasting with vector nonlinear time series models when errorsare correlated. Point forecasts are numerically obtained using bootstrap methods andillustrated by two examples. Evaluation concentrates on studying forecast equality andencompassing. Nonlinear impulse responses are further considered and graphically sum-marized by highest density region. Finally, two macroeconomic data sets are used toillustrate our work. The forecasts from linear or nonlinear model could contribute usefulinformation absent in the forecasts form the other model.

Common Features in Vector Nonlinear Time Series Models

This thesis consists of four manuscripts in the area of nonlinear time series econometrics on topics of testing, modeling and forecasting nonlinear common features. The aim of this thesis is to develop new econometric contributions for hypothesis testing and forecasting in these area. Both stationary and nonstationary time series are concerned. A definition of common features is proposed in an appropriate way to each class. Based on the definition, a vector nonlinear time series model with common features is set up for testing for common features. The proposed models are available for forecasting as well after being well specified. The first paper addresses a testing procedure on nonstationary time series. A class of nonlinear cointegration, smooth-transition (ST) cointegration, is examined. The ST cointegration nests the previously developed linear and threshold cointegration. An Ftypetest for examining the ST cointegration is derived when stationary transition variables are imposed rather than nonstationary variables. Later ones drive the test standard, while the former ones make the test nonstandard. This has important implications for empirical work. It is crucial to distinguish between the cases with stationary and nonstationary transition variables so that the correct test can be used. The second and the fourth papers develop testing approaches for stationary time series. In particular, the vector ST autoregressive (VSTAR) model is extended to allow for common nonlinear features (CNFs). These two papers propose a modeling procedure and derive tests for the presence of CNFs. Including model specification using the testing contributions above, the third paper considers forecasting with vector nonlinear time series models and extends the procedures available for univariate nonlinear models. The VSTAR model with CNFs and the ST cointegration model in the previous papers are exemplified in detail,and thereafter illustrated within two corresponding macroeconomic data sets.

Seis sigma : um estudo aplicado ao setor eletrônico

O tema deste trabalho é a metodologia Seis Sigma. O objetivo principal é apresentar e desenvolver uma metodologia para aplicação do Seis Sigma e desenvolver estudo aplicado. Inicialmente, é realizada uma revisão bibliográfica, enfocando os temas qualidade, satisfação do cliente e Seis Sigma. Na seqüência, é apresentada uma proposta de modelo para a aplicação do Seis Sigma em processos industriais. O modelo proposto aborda a estrutura para aplicação do Seis Sigma, os treinamentos e as principais atividades e ferramentas do ciclo DMAIC (Define, Measure, Analyse, Improve e Control). O modelo proposto é aplicado através de uma série de projetos. Um desses projetos é descrito detalhadamente, ilustrando o modelo proposto. Os resultados apresentados na aplicação do Seis Sigma são amplamente positivos. Os resultados obtidos abrangem melhorias radicais de qualidade, produtividade e custos. As atividades e ferramentas que apresentaram melhores resultados são destacadas. Apesar do Seis Sigma estar associado à aplicação intensiva de estatística, verifica-se que, de um modo geral, o Seis Sigma pode ser aplicado de um modo mais simplificado.

A Modular and digitally programmable interface based on band-pass sigma-delta modulator for mixed-signal systems-on-chip

The focus of this thesis is to discuss the development and modeling of an interface architecture to be employed for interfacing analog signals in mixed-signal SOC. We claim that the approach that is going to be presented is able to achieve wide frequency range, and covers a large range of applications with constant performance, allied to digital configuration compatibility. Our primary assumptions are to use a fixed analog block and to promote application configurability in the digital domain, which leads to a mixed-signal interface. The use of a fixed analog block avoids the performance loss common to configurable analog blocks. The usage of configurability on the digital domain makes possible the use of all existing tools for high level design, simulation and synthesis to implement the target application, with very good performance prediction. The proposed approach utilizes the concept of frequency translation (mixing) of the input signal followed by its conversion to the ΣΔ domain, which makes possible the use of a fairly constant analog block, and also, a uniform treatment of input signal from DC to high frequencies. The programmability is performed in the ΣΔ digital domain where performance can be closely achieved according to application specification. The interface performance theoretical and simulation model are developed for design space exploration and for physical design support. Two prototypes are built and characterized to validate the proposed model and to implement some application examples. The usage of this interface as a multi-band parametric ADC and as a two channels analog multiplier and adder are shown. The multi-channel analog interface architecture is also presented. The characterization measurements support the main advantages of the approach proposed.

Tayloring Brazil: a system dynamics model for monetary policy feedback

The thesis introduces a system dynamics Taylor rule model of new Keynesian nature for monetary policy feedback in Brazil. The nonlinear Taylor rule for interest rate changes con-siders gaps and dynamics of GDP growth and inflation. The model closely tracks the 2004 to 2011 business cycle and outlines the endogenous feedback between the real interest rate, GDP growth and inflation. The model identifies a high degree of endogenous feedback for monetary policy and inflation, while GDP growth remains highly exposed to exogenous eco-nomic conditions. The results also show that the majority of the monetary policy moves during the sample period was related to GDP growth, despite higher coefficients of inflation parameters in the Taylor rule. This observation challenges the intuition that inflation target-ing leads to a dominance of monetary policy moves with respect to inflation. Furthermore, the results suggest that backward looking price-setting with respect to GDP growth has been the dominant driver of inflation. Moreover, simulation exercises highlight the effects of the new BCB strategy initiated in August 2011 and also consider recession and inflation avoid-ance versions of the Taylor rule. In methodological terms, the Taylor rule model highlights the advantages of system dynamics with respect to nonlinear policies and to the stock-and-flow approach. In total, the strong historical fit and some counterintuitive observations of the Taylor rule model call for an application of the model to other economies.

Nonlinear pricing beyond the demand profile approach

Wilson [16] introduced a general methodology to deal with monopolistic pricing in situations where customers have private information on their tastes (‘types’). It is based on the demand profile of customers: For each nonlinear tariff by the monopolist the demand at a given level of product (or quality) is the measure of customers’ types whose marginal utility is at least the marginal tariff (‘price’). When the customers’ marginal utility has a natural ordering (i.e., the Spence and Mirrlees Condition), such demand profile is very easy to perform. In this paper we will present a particular model with one-dimensional type where the Spence and Mirrlees condition (SMC) fails and the demand profile approach results in a suboptimal solution for the monopolist. Moreover, we will suggest a generalization of the demand profile procedure that improves the monopolist’s profit when the SMC does not hold.

Forecast comparison with nonlinear methods for brazilian industrial production

Este trabalho avalia as previsões de três métodos não lineares — Markov Switching Autoregressive Model, Logistic Smooth Transition Autoregressive Model e Autometrics com Dummy Saturation — para a produção industrial mensal brasileira e testa se elas são mais precisas que aquelas de preditores naive, como o modelo autorregressivo de ordem p e o mecanismo de double differencing. Os resultados mostram que a saturação com dummies de degrau e o Logistic Smooth Transition Autoregressive Model podem ser superiores ao mecanismo de double differencing, mas o modelo linear autoregressivo é mais preciso que todos os outros métodos analisados.

Forecast comparison with nonlinear methods for Brazilian industrial production

This work assesses the forecasts of three nonlinear methods | Markov Switching Autoregressive Model, Logistic Smooth Transition Auto-regressive Model, and Auto-metrics with Dummy Saturation | for the Brazilian monthly industrial production and tests if they are more accurate than those of naive predictors such as the autoregressive model of order p and the double di erencing device. The results show that the step dummy saturation and the logistic smooth transition autoregressive can be superior to the double di erencing device, but the linear autoregressive model is more accurate than all the other methods analyzed.

Egg production curve fitting using nonlinear models for selected and nonselected lines of White Leghorn hens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A influência da cultura organizacional na adoção de práticas de qualidade Seis Sigma: um estudo exploratório no segmento de farmácia de manipulação do Estado do Rio Grand do Norte

In recent debates about the issues of quality, the theme organizational culture and Six Sigma has appeared ever more frequently. In this context several authors suggest that the adoption of Six Sigma practices is influenced by culture. This work focuses on the relationship of organizational culture and quality to the practices of Six Sigma quality. Thus a descriptive-exploratory and correlational study of forty pharmacies of manipulation from Rio Grande do Norte was undertaken. Data collection identified features of companies and the level of use of the practices of Six Sigma quality that have been identified in the literature. For the Organizational Culture evaluation was used the Competitive Value Model (Cameron & Quinn, 1996), tested on north-American organizations and considered a high value academic and professional instrument. This model has been involved with the taximetrics created by Cameron who classifies quality culture in four levels. The results suggest that the Group and Developmental cultures are associated with higher levels of use of the practices of Six Sigma quality than the Rational and Hierarchical Cultures. Regarding the levels of the culture s quality, the highest levels were most frequently cited in Errors Prevention and Perpetual Improvement and Creativity, being the last one more positively related to the Six Sigma indicators