Evaluation of the implementation of a state government community design policy aimed at increasing local walking : design issues and baseline results from RESIDE, Perth Western Australia

Objectives.
To describe the design and baseline results of an evaluation of the Western Australian government's pedestrian-friendly subdivision design code (Liveable Neighborhood (LN) Guidelines).
Methods.

Baseline results (2003–2005) from a longitudinal study of people (n = 1813) moving into new housing developments: 18 Liveable, 11 Hybrid and 45 Conventional (i.e., LDs, HDs and CDs respectively) are presented including usual recreational and transport-related walking undertaken within and outside the neighborhood, and 7-day pedometer steps.
Results.

At baseline, more participants walked for recreation and transport within the neighborhood (52.6%; 36.1% respectively), than outside the neighborhood (17.7%; 13.2% respectively). Notably, only 20% of average total duration of walking (128.4 min/week (SD159.8)) was transport related and within the neighborhood. There were few differences between the groups' demographic, psychosocial and perceived neighborhood environmental characteristics, pedometer steps, or the type, amount and location of self-reported walking (p > 0.05). However, asked what factors influenced their choice of housing development, more participants moving into LDs reported aspects of their new neighborhood's walkability as important (p < 0.05).
Conclusions.

The baseline results underscore the desirability of incorporating behavior and context-specific measures and value of longitudinal designs to enable changes in behavior, attitudes, and urban form to be monitored, while adjusting for baseline residential location preferences.

Energy efficient, fully-connected mesh networks for high speed applications

Fully-connected mesh networks that can potentially be employed in a range of applications, are inherently associated with major deficiencies in interference management and network capacity improvement. The tree-connected (routing based) mesh networks used in today’s applications have major deficiencies in routing delays and reconfiguration delays in the implementation stage. This paper introduces a CDMA based fully-connected mesh network, which controls the transmission powers of the nodes in order to ensure that the communication channels remain interference-free and minimizes the energy consumption. Moreover, the bounds for the number of nodes and the spatial configuration are provided to ensures that the communication link satisfies the QoS (Quality of Service) requirements at all times.

Localization of mobile transmitters by means of linear state estimation using RSS measurements

This paper investigates the problem of estimating the location and velocity of a mobile agent using the received signal strength (RSS) measurements. Typical power measurements are inherently nonlinear and in this approach we derive a linear measurement scheme using an analytical measurement conversion technique which can readily be used with RSS measuring sensors. Power measurements are hence used in our robust version of a linear Kalman filter to estimate the dynamic parameters of the moving transmitter.

High-speed pollen release in the white mulberry tree, Morus alba L

Anemophilous plants described as catapulting pollen explosively into the air have rarely attracted detailed examination. We investigated floral anthesis in a male mulberry tree with high-speed video and a force probe. The stamen was inflexed within the floral bud. Exposure to dry air initially resulted in a gradual movement of the stamen. This caused fine threads to tear at the stomium, ensuring dehiscence of the anther, and subsequently enabled the anther to slip off a restraining pistillode. The sudden release of stored elastic energy in the spring-like filament drove the stamen to straighten in less than 25 μs, and reflex the petals to velocities in excess of half the speed of sound. This is the fastest motion yet observed in biology, and approaches the theoretical physical limits for movements in plants.

Measurement of surface forces between mica sheets immersed in aqueous quaternary ammonium ion solutions

Forces between mica surfaces immersed in Me4NBr, Pr4NBr, and Pe4NBr solutions over a wide concentration range are reported (Me = methyl, Pr = propyl, Pe = pentyl). In each case the cation adsorbs quite strongly onto the negatively charged mica surface and determines the double-layer potential. However, this strong adsorption does not cause complete neutralization of the negative lattice charge apparently because of packing constraints due to the large size of these ions. Adsorption of Me4N+ ions gives rise to a short-range (<2 nm) repulsive force similar to that previously observed between bilayers of CTAB and may be due to the residual hydration of these ions. The large rations also, unexpectedly, give rise to short-range repulsive forces but of a somewhat different nature. In this case, the repulsive forces can be explained by assuming that the large adsorbed ions shift the plane of charge a distance of one ion diameter from the mica surface. At all but very high concentrations these larger ions could be displaced from the mica surfaces on forcing them together. No evidence of any “hydrophobic attraction” was observed between surfaces containing these adsorbed ions. Previous studies on coagulation are discussed in the light of our results.

Na+-doped zinc oxide nanofiber membrane for high speed humidity sensor

A novel sensitive humidity nanosensor based on Na1-doped ZnO nanofiber membrane has been prepared via electrospinning and calcination. The product was characterized by scanning electron microscopy and X-ray diffraction. During the whole relative humidity (11%–95%) measurement, the response and recovery time is about 3 and 6 s, respectively, with good linearity, and reproducibility. These remarkable and sensitive sensing performances make our product a good candidate in fabricating humidity sensors.

Measurement of services and supports (MOSS): project overview and findings

The Measurement of Services and Supports (MOSS) project commenced in 2005, with the initial aim of developing and trialing a tool that would evaluate the outcomes of therapy and psychology services delivered by Scope’s Therapy, Psychology and Related Services teams (previously known as Specialist Services). There are a number of key drivers that have influenced the MOSS project from its inception. These include:
• Scope’s Strategic direction;
• The State Disability Plan 2002-2012 (Victorian Department of Human Services, 2002);
• A desire to provide evidence for funding bodies relating to the effectiveness of the support
delivered by Therapy, Psychology and Related Services; and
• A desire to ensure that Therapy, Psychology and Related Services support is based on evidence.

Detection and measurement of Plasmodiophora brassicae

Clubroot, caused by Plasmodiophora brassicae, is one of the most important diseases of brassicas. Management of clubroot is difficult, and the best means of avoiding the disease include planting in areas where P. brassicae is not present and using plants and growing media free from pathogen inoculum. As P. brassicae is not culturable, its detection has traditionally relied on plant bioassays, which are time-consuming and require large amounts of glasshouse space. More recently, fluorescence microscopy, serology, and DNA-based methods have all been used to test soil, water, or plant samples for clubroot. The use of fluorescence microscopy to detect and count pathogen spores in the soil requires significant operator skill and is unlikely to serve as the basis for a routine diagnostic test. By contrast, serologic assays are inexpensive and amenable to high-throughput screening but need to be based on monoclonal antibodies because polyclonal antisera cannot be reproduced and are therefore of limited quantity. Several polymerase chain reaction (PCR)-based assays have also been developed; these are highly specific for P. brassicae and have been well-correlated with disease severity. As such, PCR-based diagnostic tests have been adopted to varying extents in Canada and Australia, but wide implementation has been restricted by sample processing costs. Efforts are underway to develop inexpensive serologic on-farm diagnostic kits and to improve quantification of pathogen inoculum levels through real-time PCR. Proper detection and quantification of P. brassicae will likely play an increasingly important role in the development of effective clubroot management strategies.

Thermal evaluation of a greenhouse in a remote high altitude area of Nepal

Remote communities in the high altitude areas of Nepal suffer both chronic and acute malnutrition. This is due to a shortage of arable land and a harsh climate. For seven months of the year, the harvesting of fresh vegetables is almost impossible. Greenhouse technology, if appropriate for the location and its community, can extend the growing season considerably. Experience in the Ladakh region of India indicates that year-round cropping is possible in greenhouses in cold mountainous areas. A simple 50-m2 greenhouse has been constructed in Simikot, the main town of Humla, northwest Nepal. This paper describes the evaluation of the thermal performance of that greenhouse. Both measurement and simulation were used in the evaluation. Measurements during the winter of 2006-7 indicate that the existing design is capable of producing adequate growing conditions for some vegetable crops, but that improvements are required if crops like tomatoes are to be grown successfully. Options to improve the thermal performance of the greenhouse have been investigated by simulation. Improvements to the building envelope such as wall insulation, double-glazing and using a thermal screen were simulated with a validated TRNSYS model. The impact of the addition of nighttime heat from internal passive solar water collectors was also predicted. The simulations indicate that the passive solar water collectors would raise the average greenhouse air temperature by 2.5°C and the overnight air temperature would increase by 4.0°C. When used in combination, overnight temperatures are predicted to by almost 7°C higher.

Dynamic nuclear polarisation enhanced (14)N overtone MAS NMR spectroscopy.

Dynamic nuclear polarisation (DNP) has been used to obtain magic angle spinning (14)N(OT) (nitrogen-14 overtone) solid-state NMR spectra from several model amino acids, with both direct and indirect observation of the (14)N(OT) signal. The crystalline solids were impregnated with biradical solutions of organic liquids that do not dissolve the crystalline phase. The bulk phase was then polarized via(1)H spin diffusion from the highly-polarized surface (1)H nuclei, resulting in (1)H DNP signal enhancements of around two orders of magnitude. Cross polarisation from (1)H nuclei directly to the (14)N overtone transition is demonstrated under magic angle spinning, using a standard pulse sequence with a relatively short contact time (on the order of 100 μs). This method can be used to acquire (14)N overtone MAS powder patterns that match closely with simulated line shapes, allowing isotropic chemical shifts and quadrupolar parameters to be measured. DNP enhancement also allows the rapid acquisition of 2D (14)N(OT) heteronuclear correlation spectra from natural abundance powder samples. (1)H-(14)N(OT) HETCOR and (13)C-(14)N(OT) HMQC pulse sequences were used to observe all single-bond H-N and C-N correlations in histidine hydrochloride monohydrate, with the spectra obtained in a matter of hours. Due to the high natural abundance of the (14)N isotope (99.6%) and the advantages of observing the overtone transition, these methods provide an attractive route to the observation of C-N correlations from samples at natural isotopic abundance and enable the high resolution measurement of (14)N chemical shifts and quadrupolar interaction parameters.

Real-time measurement of phloem turgor pressure in Hevea brasiliensis with a modified cell pressure probe

Background: Although the pressure flow theory is widely accepted for the transport of photoassimilates in phloem sieve elements, it still requires strong experimental validation. One reason for that is the lack of a precise method for measuring the real-time phloem turgor pressure from the sink tissues, especially in tree trunks. Results: Taking the merits of Hevea brasiliensis, a novel phloem turgor pressure probe based on the state of the art cell pressure probe was developed. Our field measurements showed that the phloem turgor pressure probe can sensitively measure the real-time variation of phloem turgor pressure in H. brasiliensis but the calculation of phloem turgor pressure with xylem tension, xylem sap osmotic potential and phloem sap osmotic potential will under-estimate it. The measured phloem turgor pressure gradient in H. brasiliensis is contrary to the Münch theory. The phloem turgor pressure of H. brasiliensis varied from 8-12 bar as a consequence of water withdrawal from transpiration. Tapping could result in a sharp decrease of phloem turgor pressure followed by a recovery from 8-45 min after the tapping. The recovery of phloem turgor pressure after tapping and its change with xylem sap flow suggest the importance of phloem water relationship in the phloem turgor pressure regulation. Conclusion: The phloem turgor pressure probe is a reliable technique for measuring the real-time variation of phloem turgor pressures in H. brasiliensis. The technique could probably be extended to the accurate measurement of phloem turgor pressure in other woody plants which is essential to test the Münch theory and to investigate the phloem water relationship and turgor pressure regulation. © 2014 An et al.

High-efficient production of boron nitride nanosheets via an optimized ball milling process for lubrication in oil

Although tailored wet ball milling can be an efficient method to produce a large quantity of two-dimensional nanomaterials, such as boron nitride (BN) nanosheets, milling parameters including milling speed, ball-to-powder ratio, milling ball size and milling agent, are important for optimization of exfoliation efficiency and production yield. In this report, we systematically investigate the effects of different milling parameters on the production of BN nanosheets with benzyl benzoate being used as the milling agent. It is found that small balls of 0.1-0.2 mm in diameter are much more effective in exfoliating BN particles to BN nanosheets. Under the optimum condition, the production yield can be as high as 13.8% and the BN nanosheets are 0.5-1.5 μm in diameter and a few nanometers thick and of relative high crystallinity and chemical purity. The lubrication properties of the BN nanosheets in base oil have also been studied. The tribological tests show that the BN nanosheets can greatly reduce the friction coefficient and wear scar diameter of the base oil.

Non-contact measurement of respiratory function and deduction of tidal volume

 This paper further the investigation of Doppler radar feasibility in measuring the flow in and out due to inhalation and exhalation under different conditions of breathing activities. Three different experiment conditions were designed to investigate the feasibility and consistency of Doppler radar which includes the combination of the states of normal breathing, deep breathing and apnoea state were demonstrated. The obtained Doppler radar signals were correlated and compared with the gold standard medical device, spirometer, yielding a good correlations between both devices. We also demonstrated the calibration of the Doppler radar signal can be performed in a simple manner in order to have a good agreements with the spirometer readings. The measurement of the flow in and out during the breathing activities can be measured accurately under different dynamics of breathing as long as the calibration is performed correctly.