Understanding legitimacy in a changing global economy

In a knowledge economy where technologically mediated information plays an important role, greater understanding is required of its impact on organisational sustainability. This paper examines the link between mediated information within a global economy and its relationship to a key to long-term organisational success– legitimacy. Aligning organisational legitimacy and the demands of a range of internal and external stakeholders is a central concern for managers when challenges to legitimacy continue to arise. Particularly during times of internally or environmentally driven change, challenges are created for managers seeking to ensure their organisation avoids questioning about its legitimacy. This paper presents the proposition that the perceptions of collective opinion derived from mass media provide a lens to a global world upon which managers base decisions to protect and repair organisational legitimacy. Legitimacy is determined from a broad social arena that can cross national and international boundaries (Lomi, 2000). Experience of legitimacy concerns, therefore, are often outside the traditional realms of managerial knowledge, and experience and of local business association networks (Aldrich, 1999). While the organisational landscape has been changing, at the same time, mass media have increased the focus on bringing news about events, and interpretations of events, from a broad and even global social area (Mutz, 1998). In addition, electronically facilitated media have exposed both organisational stakeholders and managers to views and interpretations of the world more quickly and more explicitly than in previous times. This paper proposes a relationship between perceptions of collective opinion derived from mass media and organisational legitimacy in such an environment.

Protecting the protectors : legal liabilities from the use of Web 2.0 for Australian disaster response

The traditional model for information dissemination in disaster response is unidirectional from official channels to the public. However recent crises in the US, such as Hurricane Katrina and the Californian Bushfires show that civilians are now turning to Web 2.0 technologies as a means of sharing disaster related information. These technologies present enormous potential benefits to disaster response authorities that cannot be overlooked. In Australia, the Victorian Bushfires Royal Commission has recently recommended that Australian disaster response authorities utilize information technologies to improve the dissemination of disaster related, bushfire information. However, whilst the use of these technologies has many positive attributes, potential legal liabilities for disaster response authorities arise. This paper identifies some potential legal liabilities arising from the use of Web 2.0 technologies in disaster response situations thereby enhancing crisis related information sharing by highlighting legal concerns that need to be addressed.

Data muling over underwater wireless sensor networks using an autonomous underwater vehicle

We present algorithms, systems, and experimental results for underwater data muling. In data muling a mobile agent interacts with static agents to upload, download, or transport data to a different physical location. We consider a system comprising an Autonomous Underwater Vehicle (AUV) and many static Underwater Sensor Nodes (USN) networked together optically and acoustically. The AUV can locate the static nodes using vision and hover above the static nodes for data upload. We describe the hardware and software architecture of this underwater system, as well as experimental data. © 2006 IEEE.

Adaptive depth estimation in image based visual servo control of dynamic systems

This paper considers the question of designing a fully image based visual servo control for a dynamic system. The work is motivated by the ongoing development of image based visual servo control of small aerial robotic vehicles. The observed targets considered are coloured blobs on a flat surface to which the normal direction is known. The theoretical framework is directly applicable to the case of markings on a horizontal floor or landing field. The image features used are a first order spherical moment for position and an image flow measurement for velocity. A fully non-linear adaptive control design is provided that ensures global stability of the closed-loop system. © 2005 IEEE.

Air vehicle simulator : An application for a cable array robot

The development of autonomous air vehicles can be an expensive research pursuit. To alleviate some of the financial burden of this process, we have constructed a system consisting of four winches each attached to a central pod (the simulated air vehicle) via cables - a cable-array robot. The system is capable of precisely controlling the three dimensional position of the pod allowing effective testing of sensing and control strategies before experimentation on a free-flying vehicle. In this paper, we present a brief overview of the system and provide a practical control strategy for such a system. ©2005 IEEE.

Krill: An exploration in underwater sensor networks

While sensor networks have now become very popular on land, the underwater environment still poses some difficult problems. Communication is one of the difficult challenges under water. There are two options: optical and acoustic. We have designed an optical communication board that allows the Fleck’s to communicate optically. We have tested the resulting underwater sensor nodes in two different applications.

If it's encrypted it's secure! The viability of US state-based encryption exemptions

US state-based data breach notification laws have unveiled serious corporate and government failures regarding the security of personal information. These laws require organisations to notify persons who may be affected by an unauthorized acquisition of their personal information. Safe harbours to notification exist if personal information is encrypted. Three types of safe harbour have been identified in the literature: exemptions, rebuttable presumptions and factors. The underlying assumption of exemptions is that encrypted personal information is secure and therefore unauthorized access does not pose a risk. However, the viability of this assumption is questionable when examined against data breaches involving encrypted information and the demanding practical requirements of effective encryption management. Recent recommendations by the Australian Law Reform Commission (ALRC) would amend the Privacy Act 1988 (Cth) to implement a data breach scheme that includes a different type of safe harbour, factor based analysis. The authors examine the potential capability of the ALRC’s proposed encryption safe harbour in relation to the US experience at the state legislature level.

Guided chaos : path planning and control for a UAV-forced landing

In recent years, unmanned aerial vehicles (UAVs) have been widely used in combat, and their potential applications in civil and commercial roles are also receiving considerable attention by industry and the research community. There are numerous published reports of UAVs used in Earth science missions [1], fire-fighting [2], and border security [3] trials, with other speculative deployments, including applications in agriculture, communications, and traffic monitoring. However, none of these UAVs can demonstrate an equivalent level of safety to manned aircraft, particularly in the case of an engine failure, which would require an emergency or forced landing. This may be arguably the main factor that has prevented these UAV trials from becoming full-scale commercial operations, as well as restricted operations of civilian UAVs to only within segregated airspace.

Mapping a suburb with a single camera using a biologically inspired SLAM system

This paper describes a biologically inspired approach to vision-only simultaneous localization and mapping (SLAM) on ground-based platforms. The core SLAM system, dubbed RatSLAM, is based on computational models of the rodent hippocampus, and is coupled with a lightweight vision system that provides odometry and appearance information. RatSLAM builds a map in an online manner, driving loop closure and relocalization through sequences of familiar visual scenes. Visual ambiguity is managed by maintaining multiple competing vehicle pose estimates, while cumulative errors in odometry are corrected after loop closure by a map correction algorithm. We demonstrate the mapping performance of the system on a 66 km car journey through a complex suburban road network. Using only a web camera operating at 10 Hz, RatSLAM generates a coherent map of the entire environment at real-time speed, correctly closing more than 51 loops of up to 5 km in length.

Lip detection for audio-visual speech recognition in-car environment

Acoustically, car cabins are extremely noisy and as a consequence audio-only, in-car voice recognition systems perform poorly. As the visual modality is immune to acoustic noise, using the visual lip information from the driver is seen as a viable strategy in circumventing this problem by using audio visual automatic speech recognition (AVASR). However, implementing AVASR requires a system being able to accurately locate and track the drivers face and lip area in real-time. In this paper we present such an approach using the Viola-Jones algorithm. Using the AVICAR [1] in-car database, we show that the Viola- Jones approach is a suitable method of locating and tracking the driver’s lips despite the visual variability of illumination and head pose for audio-visual speech recognition system.

GPS fault detection with IMU and aircraft dynamics

Approaches with Vertical Guidance (APV) can provide greater safety and cost savings to general aviation through accurate GPS horizontal and vertical navigation. However, GPS needs augmentation to achieve APV fault detection requirements. Aircraft Based Augmentation Systems (ABAS) fuse GPS with additional sensors at the aircraft. Typical ABAS designs assume high-quality inertial sensors with Kalman filters but these are too expensive for general aviation. Instead of using high-quality (and expensive) sensors, the purpose of this paper is to investigate augmenting GPS with a low-quality MEMS IMU and Aircraft Dynamic Model (ADM). The IMU and ADM are fused together using a multiple model fusion strategy in a bank of Extended Kalman Filters (EKF) with the Normalized Solution Separation (NSS) fault detection scheme. A tightly-coupled configuration with GPS is used and frequent GPS updates are applied to the IMU and ADM to compensate for their errors. Based upon a simulated APV approach, the performance of this architecture in detecting a GPS ramp fault is investigated showing a performance improvement over a GPS-only “snapshot” implementation of the NSS method. The effect of fusing the IMU with the ADM is evaluated by comparing a GPS-IMU-ADM EKF with a GPS-IMU EKF where a small improvement in protection levels is shown.

Reparations for Indigenous People: International and Comparative Perspectives

Published in concomitance with the adoption of the United Nations Declaration on the Rights of Indigenous Peoples, this volume brings together a group of renowned legal experts and activists from different parts of the world who, from international and comparative perspectives, investigate the right of indigenous peoples to reparation for breaches of their individual and collective rights. The first part of the book is devoted to general aspects of this important matter, providing a comprehensive assessment of the relevant international legal framework and including overviews of the topic of reparations for human rights violations, the status of indigenous peoples in international law, and the vision of reparations as conceived by the communities concerned. The second part embraces a comprehensive investigation of the relevant practice at the international, regional, and national level, examining the best practices of reparations according to the ideologies and expectations of indigenous peoples and offering a comparative perspective on the ways in which the right of these peoples to redress for the injuries suffered is realized worldwide. The global picture painted by these contributions provides a view of the status of relevant international law that is synthesized in the two final chapters of the book, which include a concrete example of how a judicial claim for reparation is to be structured and prescribes the best practices and strategies to be adopted in order to maximize the opportunities for indigenous peoples to obtain effective redress. As a whole, this volume offers a comprehensive vision of its subject matter in international and comparative law, with a practical approach aimed at supporting legal academics, administrators, and practitioners in improving the avenues and modalities of reparations for indigenous peoples

The Sun gives without ever receiving

A small scale sculpture that contributes towards my ongoing explorations into how our collective ability to sustain (the future) is as much a cultural problematic as it is an economic or technological one. The curatorial brief of the project was a technical one - in that each curated artist was to design a piece in CAD suitable for 3D resin printing - The object should be entirely generated through 3D visualisation and modelling tools and should be machined and shipped within the dimensions of 6cm x 6cm x 6cm. My design for this brief was influenced by recent research I had conducted in Mildura in the Sunraysia irrigated region of NW Victoria. Each name set within the work is an Australian soldier/settler – who, on returning from the ‘Great War’ was duly awarded a ‘block’ in Australia’s new inland irrigated settlements - with the explicit task of clearing it to plant and reap. Through their concerted and well-intentioned efforts, these workers began to profoundly re-shape Australia’s marginal country - inadvertently presaging the bleak future faced today by many of Australia’s inland lands and river systems. Furthermore, through that time's predominant colonial conception of ‘terra nullius’ (this land is unoccupied and therefore free to be claimed) they each played a small but formative part in building the profound cultural divide between land and peoples that still haunts Australia today. THE EXHIBITION: Inside Out is a compelling international touring exhibition featuring forty-six miniature sculptures produced in resin using 3D printing technologies. Developments in virtual computer visualisation and integrated digital technologies are giving contemporary makers new insight and opportunities to create objects and forms which were previously impossible to produce or difficult to envisage. The exhibition is the result of collaboration between the Art Technology Coalition, the University of Technology Sydney and RMIT University in Australia along with De Montfort University, Manchester Metropolitan University and Dartington College of Arts at University College Falmouth in the United Kingdom.

Electron beam evaporation of tungsten oxide films for gas sensors

Pure and Iron incorporated nanostructured Tungsten Oxide (WO3) thin films were investigated for gas sensing applications using noise spectroscopy. The WO3 sensor was able to detect lower concentrations (1 ppm-10 ppm) of NH3, CO, CH4 and Acetaldehyde gases at operating temperatures between 100 degrees celcius to 250 degrees celcius. The iron doped Tungsten Oxide sensor (WO3:Fe) showed some response to Acetaldehyde gas at relatively higher operating temperature (250 degrees celcius) and gas concentration of 10 ppm. The sensitivity of the WO3 sensor towards NH3, CH4 and Acetaldehyde at lower operating temperatures (50 degrees celcius - 100 degrees celcius) was significant when the sensor was photo-activated using blue-light emitting diode (Blue-LED). From the results, photo-activated WO3 thin film that operates at room temperature appeared to be a promising gas sensor. The overall results indicated that the WO3 sensor exhibited reproducibility for the detection of various gases and the WO3:Fe indicated some response towards Acetaldehyde gas.

Academic rigour in science assessment tasks

The critical problem of student disengagement and underachievement in the middle years of schooling (Years 4 . 9) has focussed attention on the quality of educational programs in schools, in Australia and elsewhere. The loss of enthusiasm for science in the middle years is particularly problematic given the growing demand for science professionals. Reshaping middle years programs has included an emphasis on integrating Information and Communication Technologies (ICTs) and improving assessment practices to engage students in higher cognitive processes and enhance academic rigour. Understanding the nature of academic rigour and how to embed it in students. science assessment tasks that incorporate the use of ICTs could enable teachers to optimise the quality of the learning environment. However, academic rigour is not clearly described or defined in the literature and there is little empirical evidence upon which researchers and teachers could draw to enhance understandings. This study used a collective case study design to explore teachers' understandings of academic rigour within science assessment tasks. The research design is based on a conceptual framework that is underpinned by socio-cultural theory. Three methods were used to collect data from six middle years teachers and their students. These methods were a survey, focus group discussion with teachers and a group of students and individual semi-structured interviews with teachers. Findings of the case study revealed six criteria of academic rigour, namely, higher order thinking, alignment, building on prior knowledge, scaffolding, knowledge construction and creativity. Results showed that the middle years teachers held rich understandings of academic rigour that led to effective utilisation of ICTs in science assessment tasks. Findings also indicated that teachers could further enhance their understandings of academic rigour in some aspects of each of the criteria. In particular, this study found that academic rigour could have been further optimised by: promoting more thoughtful discourse and interaction to foster higher order thinking; increasing alignment between curriculum, pedagogy, and assessment, and students. prior knowledge; placing greater emphasis on identifying, activating and building on prior knowledge; better differentiating the level of scaffolding provided and applying it more judiciously; fostering creativity throughout tasks; enhancing teachers‟ content knowledge and pedagogical content knowledge, and providing more in-depth coverage of fewer topics to support knowledge construction. Key contributions of this study are a definition and a model which clarify the nature of academic rigour.