Paleoenvironment evolution of the East Philippine Sea recorded in the new-type ferromanganese crust since the terminal Late Miocene

From systemic research of microstructure, geochemistry, uranium-series and Be-10 isotope dating on a new-type deepwater ferromanganese crust from the East Philippine Sea, the paleoenvironment evolution of the target area since the terminal Late Miocene was recovered. The vertical section changes of microstructure and chemical composition are consistent in the studied crust, which indicate three major accretion periods and corresponding paleoenvironment evolution of the crust. The bottom crust zone was formed in the terminal Late Miocene (5.6 Ma) with loose microstructure, high detritus content and high growth rate. Reductions of mineral element content, accretion rate and positive Ce-anomaly degree at 4.6 Ma indicate temporal warming, which went against the crust accretion and finally formed an accretion gap in the terminal Middle Pliocene (2.8-2.7 Ma). The more active Antarctic bottom seawaters in the Late Pliocene (2.7 Ma) facilitated the fast transfer to the top pure crust zone. Hereafter, with the further apart of volcanic source and the keeping increase of eolian material (1.0 Ma), although surrounding conditions were still favorable, mineral element content still shows an obvious reducing trend. It thereby offers new carrier and data for the unclear paleoceanographic research of the target area since the terminal Late Miocene.

松辽盆地古龙地区葡萄花油层组沉积成岩相研究

The sediment and diagenesis process of reservoir are the key controlling factors for the formation and distribution of hydrocarbon reservoir. For quite a long time, most of the research on sediment-diagenesis facise is mainly focusing on qualitative analysis. With the further development on exploration of oil field, the qualitative analysis alone can’t meet the requirements of complicated requirements of oil and gas exploreation, so the quantitative analysis of sediment-diagenesis facise and related facies modling have become more and more important. On the basis of the research result from stratum and sediment on GuLong Area Putaohua Oil Layer Group, from the basic principles of sedimentology, and with the support from the research result from field core and mining research results, the thesis mainly makes the research on the sediment types, the space framework of sands and the evolution rules of diagenesis while mainly sticking to the research on sediment systement analysis and diagenetic deformation, and make further quantitative classification on sediment-diageneses facies qualitatively, discussed the new way to divide the sediment-diagenesis facies, and offer new basis for reservoir exploration by the research. Through using statistics theory including factor analysis, cluster analysis and discriminant analysis, the thesis devided sediment-diagenesis facies quantitatively. This research method is innovative on studying sediment-diagenesis facies. Firstly, the factor analysis could study the main mechanism of those correlative variables in geologic body, and then could draw a conclusion on the control factors of fluid and capability of reservoir in the layer of studying area. Secondly, with the selected main parameter for the cluster analysis, the classification of diagenesis is mainly based on the data analysis, thus the subjective judgement from the investigator could be eliminated, besides the results could be more quantitative, which is helpful to the correlative statistical analysis, so one could get further study on the quantitative relations of each sediment-diagenesis facies type. Finally, with the reliablities of discriminant analysis cluster results, and the adoption of discriminant probability to formulate the chart, the thesis could reflect chorisogram of sediment-diagenesis facies for planar analysis, which leads to a more dependable analytic results.According to the research, with the multi-statistics analysis methods combinations, we could get quantitative analysis on sediment-diagenesis facies of reservoir, and the final result could be more reliable and also have better operability.

溶蚀岩体渗透水力学特性研究

Seepage control in karstic rock masses is one of the most important problems in domestic hydroelectric engineering and mining engineering as well as traffic engineering. At present permeability assessment and leakage analysis of multi-layer karstic rock masses are mainly qualitative, while seldom quantitative. Quantitative analyses of the permeability coefficient and seepage amount are conducted in this report, which will provide a theoretical basis for the study of seepage law and seepage control treatment of karstic rocks. Based on the field measurements in the horizontal grouting galleries of seepage control curtains on the left bank of the Shuibuya Hydropower Project on the Qingjiang river, a hydraulic model is established in this report, and the computation results will provide a scientific basis for optimization of grouting curtain engineering. Following issues are addressed in the report. (1) Based on the in-situ measurements of fissures and karstic cavities in grouting galleries, the characteristics of karstic rock mass is analyzed, and a stochastic structural model of karstic rock masses is set up, which will provide the basis for calculation of the permeability and leakage amount of karstic rock mass. (2) According to the distribution of the measured joints in the grouting galleries and the stochastic results obtained from the stochastic structural model of karstic rock mass between grouting galleries, a formula for computation of permeability tensor of fracturing system is set up, and a computation program is made with Visual Basic language. The computation results will be helpful for zoning of fissured rock masses and calculation of seepage amount as well as optimization of seepage control curtains. (3) Fractal theory is used to describe quantitatively the roughness of conduit walls of karstic systems and the sinuosity of karstic conduits. It is proposed that the roughness coefficient of kastic caves can be expressed by both fractal dimension Ds and Dr that represent respectively the extension sinuosity of karstic caves and the roughness of the conduit walls. The existing formula for calculating the seepage amount of karstic conduits is revised and programmed. The seepage amount of rock masses in the measured grouting galleries is estimated under the condition that no seepage control measures are taken before reservoir impoundment, and the results will be helpful for design and construction optimization of seepage curtains of the Shuibuya hydropower project. This report is one part of the subject "Karstic hydrogeology and the structural model and seepage hydraulics of karstic rock masses", a sub-program of "Study on seepage hydraulics of multi-layer karstic rock masses and its application in seepage control curtain engineering", which is financially supported by the Hubei Provincial key science and technology programme.

Data Reduction with Rough Sets

R. Jensen, Q. Shen, Data Reduction with Rough Sets, In: Encyclopedia of Data Warehousing and Mining - 2nd Edition, Vol. II, 2008.

Characterisation of weldpool shapes in the laser welding of thick plates

We consider the problem of finding the heat distribution and the shape of the liquid fraction during laser welding of a thick steel plate using the finite volume CFD package PHYSICA. Since the shape of the keyhole is not known in advance, the following two-step approach to handling this problem has been employed. In the first stage, we determine the geometry of the keyhole for the steady-state case and form an appropriate mesh that includes both the workpiece and the keyhole. In the second stage, we impose the boundary conditions by assigning temperature to the walls of the keyhole and find the heat distribution and the shape of the liquid fraction for a given welding speed and material properties. We construct a fairly accurate approximation of the keyhole as a sequence of include sliced cones. A formula for finding the initial radius of the keyhole is derived by determining the radius of the vaporisation isotherm for the line heat source. We report on the results of a series of computational experiments for various heat input values and welding velocities.

A geochronologic framework for the Ziegler Reservoir fossil site, Snowmass Village, Colorado

The Ziegler Reservoir fossil site near Snowmass Village, Colorado, provides a unique opportunity to reconstruct high-altitude paleoenvironmental conditions in the Rocky Mountains during the last interglacial period. We used four different techniques to establish a chronological framework for the site. Radiocarbon dating of lake organics, bone collagen, and shell carbonate, and in situ cosmogenic Be and Al ages on a boulder on the crest of a moraine that impounded the lake suggest that the ages of the sediments that hosted the fossils are between ~ 140 ka and > 45 ka. Uranium-series ages of vertebrate remains generally fall within these bounds, but extremely low uranium concentrations and evidence of open-system behavior limit their utility. Optically stimulated luminescence (OSL) ages (n = 18) obtained from fine-grained quartz maintain stratigraphic order, were replicable, and provide reliable ages for the lake sediments. Analysis of the equivalent dose (D) dispersion of the OSL samples showed that the sediments were fully bleached prior to deposition and low scatter suggests that eolian processes were likely the dominant transport mechanism for fine-grained sediments into the lake. The resulting ages show that the fossil-bearing sediments span the latest part of marine isotope stage (MIS) 6, all of MIS 5 and MIS 4, and the earliest part of MIS 3.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.

J.W. Spencer fonds, 1866, 1881-1921

Joseph William Winthrop Spencer (commonly known as J.W. Spencer) was a geologist and geomorphologist best known for his work on the geology of southern Ontario and the Great Lakes. He was born in Dundas, Upper Canada in 1851, but moved to Hamilton, Ontario in 1867. In 1871, he began studies in geology at McGill College in Montreal. In 1875 he worked in the Michigan copper mines and shortly afterwards prepared a thesis on the copper deposits. He submitted this thesis to the University of Gottingen in Germany in 1877 and was awarded a doctorate in geology, the second Canadian to earn a doctorate in this field. In 1880, he became a professor of geology and chemistry at King’s College in Windsor, N.S. Subsequently, he taught at the University of Missouri, and then the University of Georgia, but moved to Washington, D.C. in 1894, where he worked as a consultant geologist. Spencer spent much of his life studying preglacial river valleys in Ontario and the origins of the Great Lakes, as well as the Niagara River and Falls. In 1907, he published a book titled The Falls of Niagara: their evolution and varying relations to the Great Lakes. His opinions in these areas differed from some of his contemporaries, namely the American geologist Grove Karl Gilbert. Gilbert published a review of the The Falls of Niagara that exposed some flaws and inaccuracies in Spencer’s estimate of the age of the falls. Spencer’s studies also took him to the Caribbean and Central America. In 1920 he moved back to Canada, but died the following year.

Intégration de la pensée cycle de vie aux études d'impacts : cas du site minier Raglan

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal

Von den Markenteilungen bis zum Emscher Landschaftspark: Freiraumverluste und Freiraumschutz im Ruhrgebiet

In der vorliegenden Arbeit werden die Erfolge und Misserfolge der Freiraumpolitik im Ruhrgebiet untersucht. Ausgangspunkte sind der Freiraumschwund, der über einen Zeitraum von fast 200 Jahren dokumentiert wird, sowie die Gegenbewegungen, die sich für den Freiraumschutz einsetzen. Nach der Vorstellung einer Freiraumtypologie werden diese Entwicklungen in detaillierten historischen Abrissen für jeden Freiraumtyp dargestellt, woraus sich eine eigene Ruhrgebietsgeschichte - aus der Perspektive der Freiflächen und ihrer Nutzer - ergibt. Folgerichtig beginnt die vorliegende Arbeit nicht mit Kohle und Eisen, sondern mit der Land- und Forstwirtschaft. Anhand historischer Quellen wird die gängige Am-Anfang-war-die-Heide-These widerlegt, denn das Ruhrgebiet war waldreich und ein produktiver Agrarraum. Landwirtschaftliche Flächen- und Waldverluste sind die Basis der Siedlungstätigkeit. Ohne die Gemeinheitsteilungen im 19. Jahrhundert wären die Stadterweiterungen und Industrieansiedlungen im Ruhrgebiet nicht möglich gewesen. Die - in Grundzügen im Ersten Weltkrieg entwickelte - Agrarpolitik mit der Förderung von Produktivitätssteigerungen und Hofaufgaben erleichterte den weiteren Entzug von Agrarflächen, und genauso wirkt heute die Liberalisierung der Agrarmärkte. Alternative Ansätze (z.B. Direktvermarktung) konnten diesen Trend noch nicht aufhalten. Auch das Baumschutzgesetz von 1922 konnte die nationalsozialistischen Kahlschläge, die Waldverluste im Zweiten Weltkrieg und durch den Wiederaufbau nicht verhindern. Erst seit der Deindustrialisierung, der Aufforstung von Halden und der Umweltbewegung nehmen Wälder wieder zu. Demgegenüber treten Ende des 19. Jahrhunderts völlig neue Freiraumtypen auf. Die bürgerschaftliche Kleingartenbewegung wurde dank ihrer Bedeutung für die Ernährung in den Städten seit dem Ersten Weltkrieg vom Staat stark unterstützt, von den Nationalsozialisten gleichgeschaltet, konnte aber in den 1950er Jahren ihren bürgerschaftlichen Charakter und ihre Stärke wieder zurückgewinnen. Auch wenn Kleingärten als bauliche Reserveflächen missbraucht werden, geschieht dies nicht mehr ohne Ersatzland. Im Unterschied hierzu wurde die Stadtparkbewegung kommunalisiert. Sodann entstanden Volksparks mit Sportanlagen, ästhetisch ausgerichtete Gartenschauen, die breit gefächerten Revierparks der 1970er Jahre und neue Parktypen im Emscher Landschaftspark. 1920 wird der Siedlungsverband Ruhrkohlenbezirk gegründet, der mit den Verbandsgrünflächen ein eigenes Instrument zum Freiraumschutz und die Kompetenz zur Fluchtlinien- bzw. Bebauungsplanung erhielt. Inzwischen darf der Verband, vor einigen Jahren in den Regionalverband Ruhr umgewandelt, zu kommunalen Planungen nur noch Stellungnahmen abgeben. Schon früh versuchte der Verband, industrielles Ödland zu begrünen. Nach den Bahndammbegrünungen vor dem Zweiten Weltkrieg hat er seit den 1950er Jahren Halden aufgeforstet, bis in den 1990er Jahren der Aufbau des Emscher Landschaftsparks begann. Zechen- und Industriebrachen werden in neue Parks, Halden und Mülldeponien in Landmarken und Freizeitlandschaften verwandelt. Zu fragen ist, was aus diesen Geschichten für die Freiraumpolitik folgt. Zwei gegensätzliche Thesen werden diskutiert: die Tragedy of the Commons, die im Gemeineigentum die Ursache ökologischer Probleme sieht, während der Common-Property-Ansatz gerade in gemeinschaftlichen Nutzungen einen Ansatz für Problemlösungen sieht. Dabei liegt eine Besonderheit von Freiräumen in ihrem hohen Öffentlichkeitsgrad, d.h. dass sie von vielen Menschen genutzt werden und gleichzeitig mehrere, z.B. produktive, ökologische, politische oder berufliche Funktionen erfüllen. Untersucht wird, inwieweit erfolgreich gesicherte Freiflächen Merkmale von stabilen Common-Property-Institutionen tragen, d.h. welche Funktionen die Freiräume erfüllen, wie ihre Nutzung geregelt ist und vor allem welchen Einfluss die Nutzer auf Entscheidungen haben. Thesenhaft lässt sich zusammenfassen, dass ein Teil der Freiräume sein Wachstum einer derzeit unverzichtbaren Funktion verdankt, nämlich der Camouflage von Müll und Altlasten, die eine bauliche Nutzung ausschließen. Andere Freiräume verdanken ihren Bestand ihren vielfältigen Nutzungen, zur Erholung, durch Denkmäler, für Veranstaltungen, aber auch der Wertsteigerung für umliegende Wohngebiete. Ein kleiner Teil der Freiräume hat tatsächlich einen Common-Property-Charakter: Kleingartenanlagen, die von bürgerschaftlichen Gruppen gegründeten Parks sowie die Flächen, die durch Bürgerinitiativen o.ä. gegen eine bauliche Umnutzung verteidigt werden. Grund genug, um die Idee eines Netzwerks von Parkvereinen aufzugreifen, die sich von bürgerschaftlicher Seite aus für Freiräume einsetzen können.

Avaluació de la tècnica de fitoextracció per a la reducció de concentracions de metalls pesants en sòls contaminats per la indústria minera

L’explotació minera, especialment la mineria metàl•lica, ha estat sempre associada a riscos de contaminació ambiental de sòls, aigües i vegetació, originats per l’activitat extractiva, les operacions de concentració dels minerals i pels emplaçaments de residus miners sense una gestió adequada. En molts casos els residus miners s’abocaven directament a rius i rierols o s’acumulaven en piles pròximes a centres habitats i activitats agrícoles. Concretament s’estudia els cas de les mines d’Osor. Donada la possible presència de quantitats elevades de metalls pesants en aquests sòls es decideix avaluar una tècnica de remediació de sòls lleugera com la fitoextracció. La fitoextracció es basa en l’ús de plantes bioacumuladores que absorbeixen metalls del sòl. Aquesta tècnica permet una descontaminació del sòl no agressiva i de baix cost però requereix un tractament de llarga durada

Participación del gobierno en el perfil logístico de Colombia

El presente documento tiene como objetivo general analizar la situación de la logística y la competitividad en Colombia a partir de la intervención del gobierno en el periodo del 2008 a 2013 sobre los sectores más importantes del país frente al comercio internacional. Para el desarrollo de este trabajo se establecerán las necesidades específicas de cada sector frente a la participación activa del gobierno. De acuerdo a lo anterior, se presentara un análisis global del perfil logístico del sector agrícola, del sector textil, del sector del papel, del sector de hidrocarburos, el farmacéutico y del sector minero. Además se expondrán las problemáticas de cada sector y las políticas frente a los tratados de libre comercio en los que Colombia participa actualmente. Consecuentemente, se analizara el estado de la infraestructura nacional y como esta afecta al desarrollo logístico de país. La metodología que se desarrolló para este trabajo concibe una documentación teórica con fuentes primarias y secundarias del sector, opiniones públicas, e indicadores tales como el de desempeño logístico generado por el banco mundial y la facilidad para hacer negocios (doing business) y el índice global de competitividad.

Perfil logístico de Colombia sector minero

El proyecto “Perfil logístico de Colombia” tiene como objetivo poder suplir las falencias de información que existen actualmente en Colombia a la hora de proyectar el proceso logístico de un bien o servicio. Las empresas colombianas cuentan con pocos recursos para llevar la materia prima de forma eficaz a su fin o punto de consumo. Dentro de este proyecto se analizará el sector Minero en Colombia, donde este presenta un alto reconocimiento a nivel mundial. Posee metales preciosos y metales básicos, su principal producción es el carbón térmico, ferroníquel, oro y esmeraldas. De esta manera, la minería en mediana y pequeña escala presenta un alto potencial, el cual si es aprovechado de una manera adecuada puede llegar a convertirse en una fuente muy importante y representativa para el país en cuanto a ingresos y empleos. De acuerdo a los últimos años Colombia se ha convertido en un país atractivo en cuanto a la inversión de explotación minera, gracias al incremento de precios internacionales de los minerales y el desarrollo de la seguridad en Colombia. Se realizará un análisis global en el cual se mostrará la posición de Colombia frente a la situación internacional, esto se investigará de acuerdo a los diferentes indicadores como el PIB, índice global de competitividad, productividad, y balanza comercial. Así mismo, se examinará el nivel de infraestructura logística que promueve la planeación de los flujos logísticos teniendo variables de costo, tiempo, y transporte. Además se tendrán en cuenta factores como cadena de suministro, problemática del sector minero con el gobierno, caracterización mundial, panorama nacional, VSM (proveedores, productores, almacenamiento, distribución y logística inversa) y gremios.