An invasive-native mammalian species replacement process captured by camera trap survey random encounter models

Camera traps are used to estimate densities or abundances using capture-recapture and, more recently, random encounter models (REMs). We deploy REMs to describe an invasive-native species replacement process, and to demonstrate their wider application beyond abundance estimation. The Irish hare Lepus timidus hibernicus is a high priority endemic of conservation concern. It is threatened by an expanding population of non-native, European hares L. europaeus, an invasive species of global importance. Camera traps were deployed in thirteen 1 km squares, wherein the ratio of invader to native densities were corroborated by night-driven line transect distance sampling throughout the study area of 1652 km2. Spatial patterns of invasive and native densities between the invader’s core and peripheral ranges, and native allopatry, were comparable between methods. Native densities in the peripheral range were comparable to those in native allopatry using REM, or marginally depressed using Distance Sampling. Numbers of the invader were substantially higher than the native in the core range, irrespective of method, with a 5:1 invader-to-native ratio indicating species replacement. We also describe a post hoc optimization protocol for REM which will inform subsequent (re-)surveys, allowing survey effort (camera hours) to be reduced by up to 57% without compromising the width of confidence intervals associated with density estimates. This approach will form the basis of a more cost-effective means of surveillance and monitoring for both the endemic and invasive species. The European hare undoubtedly represents a significant threat to the endemic Irish hare.

Towards a spectroscopically accurate set of potentials for heavy hydride laser cooling candidates: effective core potential calculations of BaH

BaH (and its isotopomers) is an attractive molecular candidate for laser cooling to ultracold temperatures and a potential precursor for the production of ultracold gases of hydrogen and deuterium. The theoretical challenge is to simulate the laser cooling cycle as reliably as possible and this paper addresses the generation of a highly accurate ab initio $^{2}\Sigma^+$ potential for such studies. The performance of various basis sets within the multi-reference configuration-interaction (MRCI) approximation with the Davidson correction (MRCI+Q)is tested and taken to the Complete Basis Set (CBS) limit. It is shown that the calculated molecular constants using a 46 electron Effective Core-Potential (ECP) and even-tempered augmented polarized core-valence basis sets (aug-pCV$n$Z-PP, n= 4 and 5) but only including three active electrons in the MRCI calculation are in excellent agreement with the available experimental values. The predicted dissociation energy De for the X$^2\Sigma^+$ state (extrapolated to the CBS limit) is 16895.12 cm$^{-1}$ (2.094 eV), which agrees within 0.1$\%$ of a revised experimental value of <16910.6 cm$^{-1}$, while the calculated re is within 0.03 pm of the experimental result.

Replicability of data collected for empirical estimation of relative pollen productivity

The effects of repeated survey and fieldwork timing on data derived from a recently proposed standard field methodology for empirical estimation of Relative Pollen Productivity have been tested. Seasonal variations in vegetation and associated pollen assemblages were studied in three contrasting cultural habitat types; semi-natural ancient woodlands, lowland heaths, and unimproved, traditionally managed hay meadows. Results show that in woodlands and heathlands the standard method generates vegetation data with a reasonable degree of similarity throughout the field season, though in some instances additional recording of woodland canopy cover should be undertaken, and differences were greater for woodland understorey taxa than for arboreal taxa. Large differences in vegetation cover were observed over the field season in the grassland community, and matching the phenological timing of surveys within and between studies is clearly important if RPP estimates from these sites are to be comparable. Pollen assemblages from closely co-located moss polsters collected on different visits are shown to be variable in all communities, to a greater degree than can be explained by the sampling error associated with pollen counting, and further study of moss polsters as pollen traps is recommended.

Pine wilt disease and the pinewood nematode

Pine wilt disease (PWD) is one of the most damaging events affecting conifer forests (in particular Pinus spp.), in the Far East (Japan, China and Korea), North America (USA and Canada) and, more recently, in the European Union (Portugal). In Japan it became catastrophic, damaging native pine species (Pinus thunbergii and P. densiflora), and becoming the main forest problem, forcing some areas to be totally replaced by other tree species. The pine wilt nematode (PWN) Bursaphelenchus xylophilus, endemic, with minor damage, to North America, was introduced in Japan in the early XX century and then spread to Asia (China and Korea) in the 1980s. In 1999 it was detected for the first time in Portugal, where, due to timely detection and immediate government action, it was initially (1999-2008) contained to a small area 30 km SE of Lisbon. In 2008, the PWN spread again to central Portugal, the entire country now being classified as “affected area”. Being an A1 quarantine pest, the EU acted to avoid further PWN spreading and to eradicate it, by actions including financial support for surveyes and eradication, annual inspections and research programs. Experience from control actions in Japan included aerial spraying of insecticides to control the insect vector (the Cerambycid beetle Monochamus alternatus), injection of nematicides to the trunk of infected trees, slashing and burning of large areas out of control, beetle traps, biological control and tree breeding programs. These actions allowed some positive results, but also unsuccessful cases due to the PWN spread and virulence. Other Asian countries also followed similar strategies, but the nematode is still spreading in many regions. In Portugal, despite lower damage than Asia, PWD is still significant with high losses to the forestry industry. New ways of containing PWD include preventing movement of contaminated wood, cutting symptomatic trees and monitoring. Despite a national and EU legislative body, no successful strategy to control and eventually eradicate the nematode and the disease will prevail without sound scientific studies regarding the nematode and vector(s) bioecology and genetics, the ecology and ecophysiology of the pine tree species, P. pinaster and P. pinea , as well as the genomics and proteomics of pathogenicity (resistance/ susceptibility).

Pathways of recent fine-grained sediment transport on the central Portuguese continental margin

Com o intuito de estudar as principais vias de transporte de sedimentos finos recentes na zona central da margem continental Oeste Portuguesa, parâmetros geoquímicos, mineralógicos e granulométricos foram analisados em sedimentos superficiais e em matéria particulada colhida em armadilhas de sedimentos e integrados com observações da hidrodinâmica de fundo. Os parâmetros geoquímicos foram também estudados na coluna de sedimentos depositada nos últimos 150 anos e em sedimentos pré-industriais. Os referidos parâmetros determinados foram: concentrações elementares, isótopos estáveis de Pb, teores em materiais litogénicos, carbonato de cálcio e carbono orgânico. Os canhões de Lisboa-Setúbal e Cascais tiveram especial destaque no presente estudo dado que, até à data, encontram-se menos estudados que o Canhão da Nazaré. Os resultados mostram que a distribuição de sedimentos na zona central da margem ocidental Portuguesa é particionada pelos canhões e que a exportação de sedimentos da plataforma para zonas mais profundas da margem é restringida pelas correntes do talude, excepto onde os canhões funcionam como corredores para o transporte de sedimentos. Enquanto no Canhão de Lisboa-Setúbal, e provavelmente no Canhão de Cascais, o transporte de sedimentos até à zona inferior é limitada, provavelmente apenas despoletado por eventos de elevada energia, no Canhão da Nazaré o transporte ao longo do todo o canhão parece eficiente. As zonas superiores dos canhões de Lisboa-Setúbal e Cascais presentemente actuam como armadilhas de sedimentos finos, aprisionando partículas em suspensão provenientes da plataforma adjacente. A introdução directa de sedimentos provenientes das plumas dos rios Tejo e Sado nas zonas superiores dos canhões parece limitada, contudo a resuspensão dos sedimentos do prodelta do Tejo como resultado de ondas de tempestade e ondas de maré interna permite o transporte de sedimentos para os canhões adjacentes. Na plataforma de Lisboa-Setúbal-Sines foram identificadas as assinaturas geoquímicas e mineralógicas de diferentes fontes de sedimentos finos (e.g. estuários do Tejo e Sado, arribas costeiras, lagoas de St. André e Melides). As concentrações elementares pré-industriais são muito semelhantes nos canhões da Nazaré e Lisboa-Setúbal, mas variados graus de enriquecimento antrópico de metais traço estão presentes nos sedimentos recentes. A mais acentuada influência antrópica na última área referida é consistente com a sua proximidade a áreas densamente povoadas e industrializadas e com input de sedimentos originários dos rios Tejo e Sado, potenciais transportadores de partículas poluentes. A dispersão de Pb atmosférico parece também significativa sendo que toda a zona da plataforma continental adjacente aos canhões de Lisboa-Setúbal e Cascais apresenta-se enriquecida. A principal fonte de Pb antrópico identificada através de isótopos estáveis de Pb é consistente com a assinatura das cinzas de incineradoras. No Canhão de Lisboa a imersão de dragados contaminados parece ser também uma potencial importante fonte de metais traço antropogénicos.

Phosphatidylethanolamines glycoxidation: products and significance

As fosfatidiletanolaminas constituem a segunda classe de fosfolípidos mais abundantes nos organismos. Elas estão presentes nas membranas biológicas e nas lipoproteínas. As alterações estruturais dos fosfolípidos, ocorrem devido ao stress oxidativo e podem manisfestar-se em alterações das suas propriedades e funções. Já são conhecidas algumas condições fisiopatológicas, nas quais os fosfolípidos oxidados estão envolvidos, por exemplo sinalização celular, resposta imunitária, apoptose e doenças relacionadas com o envelhecimento. Por esse motivo, o interesse no estudo dos fosfolípidos oxidados e suas funções tem crescido nos últimos anos. Contudo, a maioria dos estudos realizados, focam a oxidação das fosfatidilcolinas, tendo sido dedicada pouca atenção a outras classes de fosfolipídos, como as fosfatidiletanolaminas. As fosfatidiletanolaminas, podem ainda sofrer outras modificações, devido ao grupo amina livre presente na cabeça polar, como por exemplo a glicação. As fosfatidiletanolaminas glicadas já foram detectadas em condições de hiperglicemia, em pacientes diabéticos, e tem correlação com a hemoglobina glicada. Sabe-se que a glicação de biomoléculas, pode aumentar as modificações oxidativas, que por sua vez, podem ser responsáveis pelo estado inflamatório, existente na diabetes mellitus. Tanto o stress oxidativo, como a inflamação estão relacionados com a diabetes e as suas complicações. A espectrometria de massa tem sido utilizada como uma importante tecnologia na detecção e caracterização de modificações oxidativas de fosfolípidos. Assim, neste trabalho pretendeu-se estudar as modificações oxidativas induzidas em fosfatidiletanolaminas glicadas, e os seus efeitos biológicos nos monócitos e células dendríticas do sangue periférico. Pretendeu-se ainda, estudar as alterações que ocorreram nas espécies de fosfatidiletanolaminas do fígado de ratos diabéticos. Os resultados obtidos permitiram identificar vários produtos de oxidação de fosfatidiletanolaminas glicadas, nomeadamente novos produtos formados pela oxidação da cabeça polar glicada. A oxidação na cabeça polar glicada foi, ainda, confirmada pela realização de experiências com spin traps combinadas com espetrometria de massa. Posteriormente, as fosfatidiletanolaminas oxidadas, glicadas e glicoxidadas demonstraram ter efeitos pró-inflamatórios, confirmados pelo aumento da estimulação monócitos e de células dendríticas, expresso no aumento do número de células produtoras de citocinas em comparação com o estado basal. As diferentes modificações de fosfatidiletanolaminas induziram estímulos distintos nos dois tipos de células. Sendo as fosfatidiletanolaminas glicadas e as glicoxidadas, os compostos que induziram um maior estímulo. Estes resultados sugeriram que as fosfatidiletanolaminas glicadas e as glicoxidadas podem estar associadas com o estado inflamatório que decorre da hiperglicemia crónica. Ainda, a avaliação do perfil lipídico de extratos de fígado de ratos diabéticos demonstrou que a hiperglicemia induz inúmeras alterações das espécies de fosfatidiletanolaminas e das espécies de outras classes de fosfolípidos, em simultâneo com sinais de lesão hepática. Em conclusão, este trabalho demonstra a relação existente entre, a hiperglicémia, o stress oxidativo, a glicação e oxidação de fosfatidiletanolaminas e ainda a inflamação e compliações diabéticas. Portanto a contribuição da lipidómica é importante para compreender os efeitos prejudiciais da hiperglicemia não controlada, e por isso, merece ser mais explorado.

Assessment of reserve effect in a marine protected area: the case study of the Professor Luiz Saldanha Marine Park (Portugal)

Dissertação de mest., Biologia Marinha (Ecologia e Conservação Marinhas), Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2011

Spiny lobster fishery on the southwest coast of Portugal: conciliating fisheries and conservation

Dissertação de mest., Aquacultura e Pescas (Pescas), Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2011

Determining carrier mobility with a metal–insulator–semiconductor structure

The electron and hole mobility of nickel-bis(dithiolene) (NiDT) are determined in a metal– insulator–semiconductor (MIS)structure using admittance spectroscopy. The relaxation times found in the admittance spectra are attributed to the diffusion time of carriers to reach the insulator interface and via Einstein’s relation this yields the mobility values. In this way, an electron mobility of 1:9 104 cm2=Vs and a hole mobility of 3:9 106 cm2=Vs were found. It is argued that the low mobility is caused by an amphoteric mid-gap trap level. The activation energy for electrons and holes from these traps is found to be 0.46 eV and 0.40 eV, respectively.

Entomofauna associated with the olive tree in southern Portugal

Since 2004 several studies have been carried out in order to identify the main insect species that usually inhabiting the olive ecosystem. The field trials have taken place in two olive groves, one situated in Olhão and the other one in Loulé, both in Algarve and also under Integrated Pest Management (IPM). The sampling techniques used differ according to their purpose (sticky traps, pheromone traps, pitfall traps and samples of aerial parts of the trees such as inflorescences, leaves, fruits and branches). Results showed that the main insect pests of olive tree in southern Portugal were the olive fruit fly Bactrocera oleae Gmelin (Diptera: Tephritidae) and the olive moth Prays oleae Bernard (Lepidoptera: Hyponeumetidae). Other insect pests were also found in our olive groves namely the olive psyllid Euphyllura olivina Costa (Homoptera: Psyllidae), the olive dark beetle Phloeotribus scarabaeoides Bernard (Coleoptera: Curculionidae), the mediterranean black scale Saissetia oleae (Olivier) (Homoptera: Coccidae) and the olive thrip Liothripes oleae Costa (Thysanoptera: Phlaeothripidae). Concerning the auxiliary insects that were found in our olives groves they belong to the following orders and families: Diptera (Syrphidae), Coleoptera (Carabidae, Coccinelidae and Staphylinidae), Hemiptera (Anthocoridae and Miridae), Neuroptera (Chrysopidae) and Hymenoptera (Braconidae, Encyrtidae, Eulophidae, Formicidae and Trichogrammatidae).

The effect of conservation measures on the spatial and temporal variation of rocky fish assemblages in the Arrábida Marine Park

Marine protected areas (MPAs) have been widely proposed for conservation purposes and as a tool for fisheries management. The Arrábida Marine Park is the first MPA in continental Portugal having a management plan, fully implemented since 2009. The main objective of this study was to evaluate the effect of protection measures on rocky reef fish assemblages and target invertebrates through before-after and control-effect (no-take vs. fished areas) underwater visual surveys and analysis of landings trends. Second, we used surveys before, during and after implementation of the management plan to understand fishers‟ preferences for fishing grounds and adaptation to the new rules, and evaluated the reserve effect through analysis of both ecological responses and fishing effort density. Third, we identified the main oceanographic drivers influencing the structure of reef fish assemblages and predicted the community structure for the last 50 years, in light of climatic change. Overall results suggest positive responses in biomass but not yet in numbers of some commercial species, with no effects on non-target species. The reserve effect is reinforced by the increase in landings of commercial species, despite increased fishing effort density in some areas, especially with octopus traps. Fishing grounds are mainly chosen based on the distribution of target species and associated habitats, but distance to port, weather conditions and safety also influence fishers‟ choices. Moreover, different fisheries respond differently to the protection measures, and within each fishery, individual fishers show distinct strategies, with some operating in a broader area whereas others keep preferred territories. Our results also show that wind stress and temperature are the main oceanographic drivers for rocky reef fish assemblages, with tropicalization of assemblages and polewards movements of species over the last 50 years consistent with temperature trends. We believe this study provides significant lessons for marine conservation and management of coastal systems.

Electrical characterization of metal-oxide-polymer devices for non-volatile memory applications

The objective of this thesis is to study the properties of resistive switching effect based on bistable resistive memory which is fabricated in the form of Al2O3/polymer diodes and to contribute to the elucidation of resistive switching mechanisms. Resistive memories were characterized using a variety of electrical techniques, including current-voltage measurements, small-signal impedance, and electrical noise based techniques. All the measurements were carried out over a large temperature range. Fast voltage ramps were used to elucidate the dynamic response of the memory to rapid varying electric fields. The temperature dependence of the current provided insight into the role of trapped charges in resistive switching. The analysis of fast current fluctuations using electric noise techniques contributed to the elucidation of the kinetics involved in filament formation/rupture, the filament size and correspondent current capabilities. The results reported in this thesis provide insight into a number of issues namely: (i) The fundamental limitations on the speed of operation of a bi-layer resistive memory are the time and voltage dependences of the switch-on mechanism. (ii) The results explain the wide spread in switching times reported in the literature and the apparently anomalous behaviour of the high conductance state namely the disappearance of the negative differential resistance region at high voltage scan rates which is commonly attributed to a “dead time” phenomenon which had remained elusive since it was first reported in the ‘60s. (iii) Assuming that the current is filamentary, Comsol simulations were performed and used to explain the observed dynamic properties of the current-voltage characteristics. Furthermore, the simulations suggest that filaments can interact with each other. (iv) The current-voltage characteristics have been studied as a function of temperature. The findings indicate that creation and annihilation of filaments is controlled by filling and neutralizing traps localized at the oxide/polymer interface. (v) Resistive switching was also studied in small-molecule OLEDs. It was shown that the degradation that leads to a loss of light output during operation is caused by the presence of a resistive switching layer. A diagnostic tool that predicts premature failure of OLEDs was devised and proposed. Resistive switching is a property of oxides. These layers can grow in a number of devices including, organic light emitting diodes (OLEDs), spin-valve transistors and photovoltaic devices fabricated in different types of material. Under strong electric fields the oxides can undergo dielectric breakdown and become resistive switching layers. Resistive switching strongly modifies the charge injection causing a number of deleterious effects and eventually device failure. In this respect the findings in this thesis are relevant to understand reliability issues in devices across a very broad field.

Optical and mechanical analysis on a biological cell in optical tweezers

La réponse mécanique d’une cellule à une force externe permet d’inférer sa structure et fonction. Les pinces optiques s’avèrent une approche particulièrement attrayante pour la manipulation et caractérisation biophysique sophistiquée des cellules de façon non invasive. Cette thèse explore l’utilisation de trois types de pinces optiques couramment utilisées : 1) statiques (static), 2) à exposition partagée (time-sharing) et 3) oscillantes (oscillating). L’utilisation d’un code basé sur la méthode des éléments finis en trois dimensions (3DFEM) nous permet de modéliser ces trois types de piégeage optique afin d’extraire les propriétés mécaniques cellulaires à partir des expériences. La combinaison des pinces optiques avec la mécanique des cellules requiert des compétences interdisciplinaires. Une revue des approches expérimentales sur le piégeage optique et les tests unicellulaires est présentée. Les bases théoriques liant l’interaction entre la force radiative optique et la réponse mécanique de la cellule aussi. Pour la première fois, une simulation adaptée (3DFEM) incluant la diffusion lumineuse et la distribution du stress radiatif permet de prédire la déformation d’une cellule biconcave –analogue aux globules rouges—dans un piège statique double (static dual-trap). À l’équilibre, on observe que la déformation finale est donnée par l’espacement entre les deux faisceaux lasers: la cellule peut être étirée ou même comprimée. L’exposition partagée (time-sharing) est la technique qui permet de maintenir plusieurs sites de piégeage simultanément à partir du même faisceau laser. Notre analyse quantitative montre que, même oscillantes, la force optique et la déformation sont omniprésentes dans la cellule : la déformation viscoélastique et la dissipation de l’énergie sont analysées. Une autre cellule-type, la tige cubique, est étudiée : cela nous permet d’élucider de nouvelles propriétés sur la symétrie de la réponse mécanique. Enfin, l’analyse de la déformation résolue en temps dans un piége statique ou à exposition partagée montre que la déformation dépend simultanément de la viscoélasticité, la force externe et sa forme tridimensionnelle. La technique à force oscillante (oscillating tweezers) montre toutefois un décalage temporel, entre la force et la déformation, indépendant de la forme 3D; cette approche donnerait directement accès au tenseur viscoélastique complexe de la cellule.

Comparison of Two Pollen Counting Methods of Slides from a Hirst Type Volumetric Trap.

Two of the most frequently used methods of pollen counting on slides from Hirst type traps are evaluated in this paper: the transverse traverse method and the longitudinal traverse method. The study was carried out during June–July 1996 and 1997 on slides from a trap at Worcester, UK. Three pollen types were selected for this purpose: Poaceae, Urticaceae and Quercus. The statistical results show that the daily concentrations followed similar trends (p < 0.01, R-values between 0.78–0.96) with both methods during the two years, although the counts were slightly higher using the longitudinal traverses method. Significant differences were observed, however, when the distribution of the concentrations during 24 hour sampling periods was considered. For more detailed analysis, the daily counts obtained with both methods were correlated with the total number of pollen grains for the taxon over the whole slide, in two different situations: high and low concentrations of pollen in the atmosphere. In the case of high concentrations, the counts for all three taxa with both methods are significantly correlated with the total pollen count. In the samples with low concentrations, the Poaceae and Urticaceae counts with both methods are significantly correlated with the total counts, but none of Quercus counts are. Consideration of the results indicates that both methods give a reasonable approximation to the count derived from the slide as a whole. More studies need be done to explore the comparability of counting methods in order to work towards a Universal Methodology in Aeropalynology.

Investigating Ambrosia Pollen Episodes in Poland Using Back-Trajectory Analysis

Background: The pollen grains of Ambrosia spp. are considered to be important aeroallergens. Previous studies have shown that the long-range transport of Ambrosia pollen to Poland is intermittent and mainly related to the passage of air masses over the Carpathian and Sudetes mountains from sources to the south, e.g. the Czech Republic, Slovakia and Hungary. In this study, Ambrosia pollen counts and back-trajectories from specific episodes in 1999 and 2002 have been analysed with the aim of identifying possible new sources of Ambrosia pollen arriving at three sites in Poland. Method: The combination of Ambrosia pollen measurements (daily average and bi-hourly concentrations) and air mass trajectory calculations were used to investigate two Ambrosia pollen episodes recorded at Rzeszow, Krakow and Poznań on the 4th and 5th September 1999 and 3rd September 2002. Ambrosia pollen counts were recorded by volumetric spore traps of the Hirst design. Trajectories were calculated using the transport model within the Lagrangian air pollution model, ACDEP (Atmospheric Chemistry and Deposition). Results: The collective results of pollen measurements and back-trajectory analysis indicate plumes of Ambrosia pollen travelling up through Poland from the southeast during the investigated episodes. In 1999, the plume was first recorded at Rzeszow in Southeastern Poland during the morning of the 4th September. Its route can be followed as it passed Krakow during the afternoon of the 4th, and later on the 4th and 5th September at Poznań. Similarly, back-trajectories calculated during the morning and afternoon from Krakow and Rzeszow on the 3rd September 2002 indicates that the air masses arrived at these sites from the East or Southeast. Conclusion: This study shows the progress of Ambrosia plumes into Poland from the southeast. Ambrosia pollen release occurs mainly during the day and so a midday peak in Ambrosia pollen concentrations may indicate a local source. However, if the plume of Ambrosia pollen tracked along its northwesterly path over Poland during investigated episodes did not originate from inside Poland, then it is likely that it came from the Ukraine. This identifies a possible new source of ragweed pollen for Poland. Trajectory analysis can only show the path along which an air mass travels, not the specific source area. Further investigation could therefore include source based transport models such as 3D Eulerian atmospheric transport models.