Equations to predict methane emissions from cows fed at maintenance energy level in pasture-based systems

Ruminant production is a vital part of food industry but it raises environmental concerns, partly due to the associated methane outputs. Efficient methane mitigation and estimation of emissions from ruminants requires accurate prediction tools. Equations recommended by international organizations or scientific studies have been developed with animals fed conserved forages and concentrates and may be used with caution for grazing cattle. The aim of the current study was to develop prediction equations with animals fed fresh grass in order to be more suitable to pasture-based systems and for animals at lower feeding levels. A study with 25 nonpregnant nonlactating cows fed solely fresh-cut grass at maintenance energy level was performed over two consecutive grazing seasons. Grass of broad feeding quality, due to contrasting harvest dates, maturity, fertilisation and grass varieties, from eight swards was offered. Cows were offered the experimental diets for at least 2 weeks before housed in calorimetric chambers over 3 consecutive days with feed intake measurements and total urine and faeces collections performed daily. Methane emissions were measured over the last 2 days. Prediction models were developed from 100 3-day averaged records. Internal validation of these equations, and those recommended in literature, was performed. The existing in greenhouse gas inventories models under-estimated methane emissions from animals fed fresh-cut grass at maintenance while the new models, using the same predictors, improved prediction accuracy. Error in methane outputs prediction was decreased when grass nutrient, metabolisable energy and digestible organic matter concentrations were added as predictors to equations already containing dry matter or energy intakes, possibly because they explain feed digestibility and the type of energy-supplying nutrients more efficiently. Predictions based on readily available farm-level data, such as liveweight and grass nutrient concentrations were also generated and performed satisfactorily. New models may be recommended for predictions of methane emissions from grazing cattle at maintenance or low feeding levels.

Rapid, automated detection of stem canker symptoms in woody perennials using artificial neural network analysis

Background Pseudomonas syringae can cause stem necrosis and canker in a wide range of woody species including cherry, plum, peach, horse chestnut and ash. The detection and quantification of lesion progression over time in woody tissues is a key trait for breeders to select upon for resistance. Results In this study a general, rapid and reliable approach to lesion quantification using image recognition and an artificial neural network model was developed. This was applied to screen both the virulence of a range of P. syringae pathovars and the resistance of a set of cherry and plum accessions to bacterial canker. The method developed was more objective than scoring by eye and allowed the detection of putatively resistant plant material for further study. Conclusions Automated image analysis will facilitate rapid screening of material for resistance to bacterial and other phytopathogens, allowing more efficient selection and quantification of resistance responses.

Designing care bundle documentation to support the recognition and treatment of acute kidney injury: a route to quality improvement

The chapter describes development of care bundle documentation, through an iterative, user-centred design process, to support the recognition and treatment of acute kidney injury (AKI). The chapter details stages of user and stakeholder consultation, employed to develop a design response that was sensitive to user experience and need, culminating in simulation testing of a near final prototype. The development of supplementary awareness-raising materials, relating to the main care bundle tool is also discussed. This information design response to a complex clinical decision-making process is contrasted to other approaches to promoting AKI care. The need for different but related approaches to the working tool itself and the tool’s communication are discussed. More general recommendations are made for the development of communication tools to support complex clinical processes.

Bad reduction of genus three curves with complex multiplication

Let C be a smooth, absolutely irreducible genus 3 curve over a number field M. Suppose that the Jacobian of C has complex multiplication by a sextic CM-field K. Suppose further that K contains no imaginary quadratic subfield. We give a bound on the primes p of M such that the stable reduction of C at p contains three irreducible components of genus 1.

The “Great Queen of Lightninge Flashes”: the transmission of female-voiced burlesque poetry in the early seventeenth century

The essay uncovers evidence for the construction of the ‘woman author’ in the largely male vogue for bawdy burlesque poetry by tracing the circulation of a pair of verses through seventeenth-century manuscript and print miscellanies. It argues that just as these verses are reworked and recontextualised through the process of transmission, so to their ‘authors’ are re-embodied and ascribed different identities in different publication contexts. Female-voiced bawdy poetry raises particular problems for authorial attribution, rather than searching for the real woman behind the text, the essay examines how the ‘authors’ of female-voiced bawdy poetry were produced and reproduced through shifting formal frameworks and socioliterary networks.

Gaze stabilization testing: The efficiency and test-retest reliability of user operated control versus the parameter estimation (PEST) algorithm

The primary objective of this research study is to determine which form of testing, the PEST algorithm or an operator-controlled condition is most accurate and time efficient for administration of the gaze stabilization test

Stress, time pressure, and decision making

This study surveys parents with children who are deaf or hard of hearing from one private school in St. Louis, Missouri. The issue of stress and time pressure on decision making is addressed and the importance of how stress and time pressure effect parents’ decisions regarding their children who are deaf and hard of hearing.

Microstructure and Mineral Composition of Dental Enamel of Permanent and Deciduous Teeth

Purpose: This study evaluated and compared in vitro the microstructure and mineral composition of permanent and deciduous teeth`s dental enamel. Methods: Sound third molars (n = 12) and second primary molars (n = 12) were selected and randomly assigned to the following groups, according to the analysis method performed (n = 4): Scanning electron microscopy (SEM), X-Ray diffraction (XRD) and Energy dispersive X-ray spectrometer (EDS). Qualitative and quantitative comparisons of the dental enamel were done. The microscopic findings were analyzed statistically by a nonparametric test (Kruskal-Wallis). The measurements of the prisms number and thickness were done in SEM photomicrographs. The relative amounts of calcium (Ca) and phosphorus (P) were determined by EDS investigation. Chemical phases present in both types of teeth were observed by the XRD analysis. Results: The mean thickness measurements observed in the deciduous teeth enamel was 1.14 mm and in the permanent teeth enamel was 2.58 mm. The mean rod head diameter in deciduous teeth was statistically similar to that of permanent teeth enamel, and a slightly decrease from the outer enamel surface to the region next to the enamel-dentine junction was assessed. The numerical density of enamel rods was higher in the deciduous teeth, mainly near EDJ, that showed statistically significant difference. The percentage of Ca and P was higher in the permanent teeth enamel. Conclusions: The primary enamel structure showed a lower level of Ca and P, thinner thickness and higher numerical density of rods. Microsc. Res. Tech. 73:572-577, 2010. (C) 2009 Wiley-Liss. Inc.

Influence of energy and pulse repetition rate of Er : YAG laser on enamel ablation ability and morphological analysis of the laser-irradiated surface

Objective: To assess the influence of energy and pulse repetition rate of Er:YAG laser on the enamel ablation ability and substrate morphology. Methods: Fifteen crowns of molars were sectioned in four fragments, providing 60 samples, which were ground to flatten the enamel surface. The initial mass was obtained by weighing the fragments. The specimens were hydrated for I h, fixed, and a 3-mm-diameter area was delimited. Twelve groups were randomly formed according to the combination of laser energies (200, 250, 300, or 350 mJ) and pulse repetition rates (2, 3, or 4 Hz). The final mass was obtained and mass loss was calculated by the difference between the initial and final mass. The specimens were prepared for SEM. Data were submitted to ANOVA and Scheffe test. Results: The 4 Hz frequency resulted in higher mass loss and was statistically different from 2 and 3 Hz (p < 0.05). The increase of frequency produced more melted areas, cracks, and unselective and deeper ablation. The 350 mJ energy promoted greater mass loss, similar to 300 mJ. Conclusions: The pulse repetition rate influenced more intensively the mass loss and morphological alteration. Among the tested parameters, 350 mJ/3 Hz improved the ability of enamel ablation with less surface morphological alterations. (C) 2007 Wiley Periodicals, Inc. J Biomed Mater Res.

Chemical and Morphological Features of Dental Composite Resin: Influence of Light Curing Units and Immersion Media

Aims: The study evaluated the influence of light curing units and immersion media on superficial morphology and chemistry of the nanofilled composite resin Supreme XT (3M) through the EDX analysis and SEM evaluation. Light curing units with different power densities and mode of application used were XL 3000 (480 mW/cm(2)), Jet Lite 4000 Plus (1230mW/cm(2)), and Ultralume Led 5 (790 mW/cm(2)) and immersion media were artificial saliva, Coke(R), tea and coffee, totaling 12 experimental groups. Specimens (10 mm X 2 mm) were immersed in each respective Solution for 5 min, three times a day, during 60 days and stored in artificial saliva at 37 degrees C +/- 1 degrees C between immersion periods. Topography and chemical analysis was qualitative. Findings: Groups immersed in artificial saliva, showed homogeneous degradation of matrix and deposition of calcium at the material surface. Regarding coffee, there was a reasonable chemical degradation with loss of load particles and deposition of ions. For tea, superficial degradation occurred in specific areas with deposition of calcium, carbon. potassium and phosphorus. For Coke(R), excessive matrix degradation and loss of load particles with deposition of calcium, sodium, and potassium. Conclusion: Light curing units did not influence the superficial morphology of composite resin tested, but the immersion beverages did. Coke(R) affected material`s surface more than did the other tested drinks. Microsc. Res. Tech. 73:176-181, 2010. (c) 2009 Wiley-Liss Inc.

Dietary Quality and Associated Factors among Factory Workers in the Metropolitan Region of Sao Paulo, Brazil

The workplace is a manageable community-based setting for ensuring proper nutrition. This study aimed to evaluate dietary quality and associated factors among adult workers at a cosmetics factory in the metropolitan area of Sao Paulo, Brazil. This factory was actively participating in the Brazilian Workers` Meal Program, which was created to ensure workers` nutritional health. In this cross-sectional study, data on 202 adult workers were assessed using questionnaires (sociodemographic, anthropometric, and lifestyle characteristics) administered during August and September 2006. Dietary intake, measured by 24-hour dietary recall, was used to calculate the modified Healthy Eating Index (HEI). A repeated administration of the 24-hour dietary recall was applied in a random subsample to calculate the modified HEI adjusted for the within-person variation in intake. Mean adjusted modified HEI scores were analyzed using multiple linear regression adjusted for energy. The mean adjusted modified HEI score was 72.3 +/- 8.0. The lowest adjusted modified HEI components scores were ""milk and dairy products"" (4.4 +/- 3.2) and ""sodium"" (3.7 +/- 3.1). Two percent of workers had ""poor diet"" (adjusted modified HEI score <51 points) and the majority (87%) had ""diet that needs modification"" (adjusted modified HEI score between 51 and 80), despite their participation in the meal program. Adjusted modified HEI scores were considerably higher for men (74.7 +/- 7.0) than for women (66.9 +/- 8.2) and for normal body mass index (calculated as kg/m(2)) (73.3 +/- 7.8) than for overweight/obese (70.9 +/- 8.1). Based on these results, the vast majority of workers were found to have diets that needed improvement. Individuals with higher-quality diets were more likely to have lower body mass index and to be male. J Am Diet Assoc. 2010;110:786-790.

Perception of eating practices and stages of change among Brazilian adolescents

Objective. To evaluate the perception of eating practices and the stages of change among adolescents. Methods. Cross-sectional study involving a representative sample of 390 adolescents from 11 public schools in the city of Piracicaba, Brazil, in 2004. Food consumption was identified by a food frequency questionnaire and the perception of eating practices evaluation was conducted by comparing food consumption and individual classification of healthy aspects of the diet. The participants were classified within stages of change by means of a specific algorithm. A reclassification within new stages of change was proposed to identify adolescents with similar characteristics regarding food consumption and perception. Results. Low consumption of fruit and vegetables and high consumption of sweets and fats were identified. More than 44% of the adolescents had a mistaken perception of their diet. A significant relationship between the stages of change and food consumption was observed. The reclassification among stages of change, through including the pseudo-maintenance and non-reflective action stages was necessary, considering the high proportion of adolescents who erroneously classified their diets as healthy. Conclusion. Classification of the adolescents into stages of change, together with consumption and perception data, enabled identification of groups at risk, in accordance with their inadequate dietary habits and non-recognition of such habits. (C) 2009 Elsevier Inc. All rights reserved.

Identification of Hammondia heydorni oocysts by a heminested-PCR (hnPCR-AP10) based on the H-heydorni RAPD fragment AP10

Toxoplasma gondii, Hammondia hammondi, Neospora caninum, Neospora hughesi and Hammondia heydorni are members of the Toxoplasmatinae sub-family. They are closely related coccidians with similarly sized oocysts. Molecular diagnostic techniques, especially those based on polymerase chain reaction (PCR), can be successfully applied for the differentiation of Hammondia-like oocysts. In this paper, we describe a rapid and simple method for the identification of H. heydorni oocysts among other members of the Toxoplasmatinae sub-family, using a heminested-PCR (hnPCR-AP10) based on a H. heydorni RAPD fragment available in molecular database. DNA of oocysts of H. heydorni yielded a specific fragment of 289-290 bp in the heminested-PCR assay. No product was yielded when the primers were used for the amplification of DNA extracted from T. gondii, N. caninum, N. hughesi and H. hammondi, thus allowing the differentiation of H. heydorni among other members of the Toxoplasmatinae sub-family. The hnPCR-AP10 was capable of detecting H. heydorni genetic sequences from suspensions with at least 10 oocysts. In conclusion, the hnPCR-AP10 proved to be a reliable method to be used in the identification of H. heydorni oocysts from feces of dogs. (C) 2010 Elsevier B.V. All rights reserved.