Compartimentação morfoestrutural da região do Triângulo Mineiro (MG): aplicado a exploração de recursos hídricos subterrâneos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Heavy mineral as a tool to refine the stratigraphy of kaolin deposits in the Rio Capim Area, Northern Brazil

Estudos de minerais pesados provenientes em depósitos cauliníticos da Formação Ipixuna na região do rio Capim (Brasil) revelaram uma mineralogia matura a supermatura, representada dominantemente por zircão e turmalina e, subordinadamente, rutilo, cianita e estaurolita. Os minerais encontrados não variam muito, entretanto cada unidade caulinítica apresenta uma assinatura particular definida por diferenças nasproporções entre os principais minerais, assim como em suas características texturais. Este trabalho demonstrou que asunidades de caulim soft (inferior) e semi-flint (superior) podem ser consideradas seqüências deposicionais distintas. As altas percentagens de opacos em relação aos minerais transparentes e altos teores de zircão são diagnósticos da unidade caulinítica inferior. O incremento no volume de grãos de zircão e turmalina arredondados a subarredondados na unidade caulinítica superior sugere que esta inclui grãos que foram submetidos a um grau mais elevado de retrabalhamento. O aumento no volume de grãos não alterados de estaurolita e cianita na unidade superior leva a concluir que, além da reciclagem sedimentar, uma fonte distinta deve ser invocada. Estes resultados também mostram que as características da assembléia de minerais pesados da unidade intermediária são comparáveis com aqueles da unidade superior, o que sugere mesmo posicionamento estratigráfico.

Mineralogical and geochemical influences on sediment color of Amazon wetlands analyzed by visible spectrophotometry

Com base em dados sedimentológicos e geoquímicos, este trabalho relaciona medições espectrofotométricas com a composição do sedimento, e sua aplicação em estudos paleoecológicos das áreas alagáveis da Amazônia. Os dados CIELAB estão diretamente relacionados à composição mineralógica e química dos sedimentos, especialmente quartzo, oxihidróxidos e sulfetos de ferro, e carbono orgânico total. Conteúdos de carbono orgânico total entre 0,4-1%, 1-2%, 3-5% e 15-40% foram relacionados a dados de L* (luminosidade) de 27, 26-15, 7-10 e 7 ou menos, respectivamente. Os valores CIELAB de um depósito com turfa em Marabá, Pará, foram proporcionais a variações no conteúdo de quartzo e carbono orgânico total, mas mudanças nas zonas de cores similares, principalmente nos valores de +a* (vermelho) e +b* (amarelo), ao longo de outros depósitos em Calçoene, Amapá e Soure, Pará, indicam uma relação muito próxima entre os conteúdos de carbono orgânico total, oxihidróxidos e sulfetos de ferro. Além disso, o diagrama Q7/4 (razão entre valores percentuais de refletância em 700 nm e 400 nm, juntamente com dados de L*) indicou sedimentos ricos em ferro para a fácies lama bioturbada no depósito do Amapá, fácies lama bioturbada e areia bioturbada do depósito de Soure, e das fácies areia com laminação cruzada e areia maciça do depósito de Marabá. Ainda, sedimentos ricos em carbono orgânico foram encontrados na lama bioturbada no depósito do Amapá, fácies heterolítica lenticular e lama bioturbada do depósito de Soure, e das fácies lama laminado e turfa do depósito de Marabá. Na área de Marabá, os dados sugerem uma influência autóctone com formação de turfa. As áreas de zonas úmidas costeiras no Marajó e Amapá representam o desenvolvimento típico de planícies de maré com formação de sulfetos e oxihidróxidos de ferro durante alternâncias entre inundação e exposição.

Characterization of monocarboxylate transporters (MCTs) expression in soft tissue sarcomas: distinct prognostic impact of MCT1 sub-cellular localization

Background: Soft tissue sarcomas (STSs) are a group of neoplasms, which, despite current therapeutic advances, still confer a poor outcome to half of the patients. As other solid tumors, STSs exhibit high glucose consumption rates, associated with worse prognosis and therapeutic response. As highly glycolytic tumors, we hypothesized that sarcomas should present an increased expression of lactate transporters (MCTs).Methods: Immunohistochemical expression of MCT1, MCT2, MCT4 and CD147 was assessed in a series of 86 STSs and the expression profiles were associated with patients' clinical-pathological parameters.Results: MCT1, MCT4 and CD147 were mainly observed in the plasma membrane of cancer cells (around 60% for MCTs and 40% for CD147), while MCT2 was conspicuously found in the cytoplasm (94.2%). Importantly, we observed MCT1 nuclear expression (32.6%). MCT1 and MCT4, alone or co-expressed with CD147 in the plasma membrane, were associated with poor prognostic variables including high tumor grade, disease progression and shorter overall survival. Conversely, we found MCT1 nuclear expression to be associated with low grade tumors and longer overall survival.Conclusions: The present work represents the first report of MCTs characterization in STSs. We showed the original finding of MCT1 expression in the nucleus. Importantly, opposite biological roles should be behind the dual sub-cellular localization of MCT1, as plasma membrane expression of MCT1 is associated with worse patients' prognosis, while nuclear expression is associated with better prognosis.

Empirical models for estimating the suspended sediment concentration in Amazonian white water rivers using Landsat 5/TM

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of Implant Drill Materials on Wear, Deformation, and Roughness After Repeated Drilling and Sterilization

Purpose:The aim of this study was to evaluate deformation, roughness, and mass loss of stainless steel, diamond-like carbon (DLC)-coated and zirconia drills after multiple osteotomies with sterilization procedures.Materials and Methods:Drilling procedures were performed using stainless steel (G1), DLC-coated (G2), and zirconia (G3) drills. All groups were divided in subgroups 1, 2, 3, 4, and 5, corresponded to drills used 0, 10, 20, 30, and 40 times, respectively.Results:No significant differences in mass and roughness were detected among all groups and subgroups. In SEM images, all groups revealed signs of wear while coating delamination was detected in G2. Drills from G1 displayed more irregular surface, whereas cutting edges were more regular in G3.Conclusion:Zirconia drills presented more regular surfaces whereas stainless steel drills revealed more severe signs of wear. Further studies must be performed to evaluate the putative influence of these findings in heat generation.

Effect of bleaching agents and soft drink on titanium surface topography

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of Bone Heating, Drill Deformation, and Drill Roughness After Implant Osteotomy: Guided Surgery and Classic Drilling Procedure

Purpose: This study evaluated and compared bone heating, drill deformation, and drill roughness after several implant osteotomies in the guided surgery technique and the classic drilling procedure. Materials and Methods: The tibias of 20 rabbits were used. The animals were divided into a guided surgery group (GG) and a control group (CG); subgroups were then designated (G0, G1, G2, G3, and G4, corresponding to drills used 0, 10, 20, 30 and 40 times, respectively). Each animal received 10 sequential osteotomies (5 in each tibia) with each technique. Thermal changes were quantified, drill roughness was measured, and the drills were subjected to scanning electron microscopy. Results: Bone temperature generated by drilling was significantly higher in the GG than in the CG. Drill deformation in the GG and CG increased with drill use, and in the CG a significant difference between GO and groups G3 and G4 was observed. In the GG, a significant difference between GO and all other groups was found. For GG versus CG, a significant difference was found in the 40th osteotomy. Drill roughness in both groups was progressive in accordance with increased use, but there was no statistically significant difference between subgroups or between GG and CG overall. Conclusion: During preparation of implant osteotomies, the guided surgery technique generated a higher bone temperature and deformed drills more than the classic drilling procedure. The increase in tissue temperature was directly proportional to the number of times drills were used, but neither technique generated critical necrosis-inducing temperatures. Drill deformation was directly proportional to the number of times the drills were used. The roughness of the drills was directly proportional to the number of reuses in both groups but tended to be higher in the GG group.

Comparison of changes in dental and bone radiographic densities in the presence of different soft-tissue simulators using pixel intensity and digital subtraction analyses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Histopathological Changes by the Use of Soft Reline Materials: A Rat Model Study

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Surface-sediment and hermit-crab contamination by butyltins in southeastern Atlantic estuaries after ban of TBT-based antifouling paints

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrical behavior of Bi0.95Nd0.05FeO3 thin films grown by the soft chemical method

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A genetic algorithm/mathematical programming approach to solve a two-level soft drink production problem

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Biologia e ecologia de ermitões (Crustacea, Anomura) do sublitoral não consolidado do sudeste brasileiro

Pós-graduação em Ciências Biológicas (Zoologia) - IBB