Stereoselective Catalytic Processes for the Synthesis of Polycyclic Aromatic Compounds

In this PhD-thesis, two methodologies for enantioselective intramolecular ring closing reaction on indole cores are presented. The first methodology represents a highly stereoselective alkylation of the indole N1-nitrogen, leading to 3,4-dihydro-pyrazinoindol-1-ones – a structural class which is known for its activity on the CNS and therefore of high pharmacological interest concerning related diseases. In this approach, N-benzyl cinchona-alkaloids were used for the efficient catalysis of intramolecular aza-Michael reactions. Furthermore, computational studies in collaboration with the research group Prof. Andrea Bottoni (Department of Chemistry “G. Ciamician”, Bologna) were accomplished in order to get insight into the key interactions between catalyst and substrate, leading to enantiomeric excesses up to 91%. The results of the calculations on a model system are in accordance with the experimental results and demonstrate the high sensibility of the system towards structural modifications. The second project deals with a metal catalyzed, intramolecular Friedel-Crafts (FC)-reaction on indolyl substrates, carrying a side chain which on its behalf is furnished with an allylic alcohol unit. Allylic alcohols are part of the structural class of “π-activated alcohols” – alcohols, which are more easily activated due to the proximity to a π-unit (allyl-, propargyl-, benzyl-). The enantioselective intramolecular cyclization event is catalyzed efficiently by employment of a chiral Au(I)-catalyst, leading to 1-vinyl- or 4-vinyl-tetrahydrocarbazoles (THCs) under the formation of water as byproduct. This striking and novel process concerning the direct activation of alcohols in catalytic FC-reactions was subsequently extended to similar precursors, leading to functionalized tetrahydro-β-carbolines. These two methodologies represent highly efficient approaches towards the synthesis of scaffolds, which are of enormous pharmaceutical interest and amplify the spectra of enantioselective catalytic functionalisations of indoles.

Untersuchungen an gespeicherten 40 Ca +-Ionen in einer linearen Paulfalle

In Experimenten an lasergekühlten, in einer linearen Paulfalle gespeicherten $Ca^+$-Ionen wurde dieLebensdauer des metastabilen $3D_{5/2}$-Niveaus durch Beobachtung von Quantensprüngen einzelner Ionen zu 1100(18)msbestimmt. Systematische Fehler durch quenchende Stöße oder Stark-Mischen durch das Speicherfeld liegen unterhalb dererreichten Genauigkeit. Abweichungen von früheren Messungen konnten durch eine vernachlässigte Abhängigkeit derLebensdauer von der Laserleistung des Rückpumplasers erklärt werden. Das Endergebnis zeigt gute Übereinstimmung mitneueren theoretischen Werten. In weiteren Messungen an zehn Ionen wurde in einigen Messreihen eine deutliche Reduktionder Lebensdauer gegenüber einem einzelnen Ion festgestellt. Dabei wurden mehr koinzidente Zerfälle von zwei und dreiIonen beobachtet als für unabhängige Teilchen zu erwarten. In einem Ionenkristall wurde eine räumliche Trennung atomarer Zustände erreicht. Dabei wurde ein Teil der Ionen einesKristalls aus einigen hundert Ionen in den metastabilen Zustand gepumpt, der von den Kühllasern vollständig entkoppeltist. Durch sympathetische Kühlung werden diese Ionen weiterhin gekühlt und der Kristall schmilzt nicht. Durch denLichtdruck, den die Kühllaser ausgeüben, werden die Ionen nach atomaren Zuständen sortiert, weil die lasergekühltenIonen einen Rückstoß erfahren, die übrigen aber nicht. Für zukünftige Experimente wurden Verbesserungen des experimentellen Aufbaus auf den Weg gebracht. So wurden Methodenund Komponenten für eine verbesserte Frequenzstabilisierung der Diodenlaser entwickelt.

Acciaio COR-TEN esposto in ambiente urbano-costiero: studio del rilascio di metalli di lega

Il Cor-Ten è un acciaio micro-legato, detto anche acciaio patinabile, che garantisce una buona resistenza alla corrosione da agenti atmosferici. Proprio grazie a questa sua peculiare caratteristica sta conoscendo un vasto impiego in particolare nel campo dell’edilizia e delle infrastrutture. La corrosione infatti interessa tutti i settori produttivi e non, provocando ingenti danni economici. Stime effettuate negli ultimi 40anni da diversi enti internazionali indicano che l’entità di questi danni, pur variando da settore a settore, risulta compresa per i paesi industrializzati tra il 3 e il 4% del PIL. Da questi dati si evince la necessità di proteggere i materiali dalla corrosione; in genere per questo scopo si ricorre a trattamenti superficiali o a rivestimenti protettivi. Queste tecniche non rappresentano però l’unica strada, è possibile infatti agire sulla composizione della lega, come nel caso del Cor-Ten, in modo che l’interazione metallo-ambiente porti alla formazione di una patina protettiva di prodotti di corrosione relativamente stabili. La formazione di questo strato, cosiddetto passivante, protegge il metallo da un’ulteriore attacco corrosivo. Scopo di questo lavoro di tesi è studiare il comportamento di questo materiale in ambiente urbano-costiero in tre differenti stati di finitura in cui è commercialmente disponibile: grezzo, pre-patinato e pre-patinato cerato, focalizzando l’attenzione sugli aspetti ambientali legati al suo utilizzo e cercando di valutare in particolare il rilascio dei metalli di lega nell’ambiente, aspetto fino ad ora non considerato in letteratura. I risultati ottenuti indicano che sembrerebbe preferibile l’utilizzo del materiale grezzo rispetto ai pre-patinati, almeno per quanto riguarda il rilascio di metalli in ambiente. Sulla base dei risultati ottenuti è possibile fornire una stima, per i tre stati di finitura di Cor-Ten A considerati, del quantitativo totale (solubile + estraibile) dei metalli rilasciati in ambiente nei sette mesi di esposizione durante la stagione primaverile-estiva della sperimentazione condotta in questo studio. La quantità rilasciata stimata per il Fe oscilla tra i 0,5 g/m2 per i provini light e i 0,7 g/m2 per i provini dark e grezzi, per il Ni il range è compreso tra i 3,6 mg/m2 dei provini grezzi e i 5 mg/m2 per i light, nel caso del Mn il quantitativo varia dai 6,8 mg/m2 per i light ai 10 mg/m2 per i grezzi. Per il Cr la stima per i provini pre-patinati è simile e si attesta intorno a 1,7 mg/m2, risultando minore (anche se in maniera non rilevate) per i grezzi.

Addizione viniloga enantioselettiva di Michael di alchilidenossindoli a nitroolefine

Questo lavoro di tesi è frutto di uno studio sull’addizione viniloga enenantioselettiva di sistemi 3-alchilidenossindolici a nitrotrirene utilizzando un catalizzatore bifunzionale in grado di attivare la posizione gamma del suddetto ossindolo, per mezzo di una reazione acidobase, e di attivare il nitrostirene attraverso interazione via legame a idrogeno. Questo progetto nasce come novità assoluta nel mondo dell’organocatalisi.

Corrosione atmosferica in area urbana-costiera di un acciaio Cor-Ten: studio del rilascio in ambiente dei metalli di lega

Cor-Ten is a particular kind of steel, belonging to low-alloyed steel; thanks to his aesthetic features and resistance to atmospheric corrosion, this material is largely used in architectural, artistic and infrastructural applications. After environmental exposure, Cor-Ten steel exhibits the characteristic ability to self-protect from corrosion, by the development of a stable and adherent protective layer. However, some environmental factors can influence the formation and stability of the patina. In particular, exposure of Cor-Ten to polluted atmosphere (NOx, SOx, O3) or coastal areas (marine spray) may cause problems to the protective layer and, as a consequence, a release of alloying metals, which can accumulate near the structures. Some of these metals, such as Cr and Ni, could be very dangerous for soils and water because of their large toxicity. The aim of this work was to study the corrosion behavior of Cor-Ten exposed to an urban-coastal site (Rimini, Italy). Three different kinds of commercial surface finish (bare and pre-patinated, with or without a beeswax covering) were examined, both in sheltered and unsheltered exposure conditions. Wet deposition brushing the specimens surface (leaching solutions) are monthly collected and analyzed to evaluate the extent of metal release and the form in which they leave the surface, for example, as water-soluble compounds or non-adherent corrosion products. Five alloying metals (Fe, Cu, Cr, Mn and Ni) and nine ions (Cl-, NO3-, NO2-, SO42-, Na+, Ca2+, K+, Mg2+, NH4+) are determined through Atomic Absorption Spectroscopy and Ion Chromatography, respectively. Furthermore, the evolution and the behaviour of the patina are periodically followed by surface investigations (SEM-EDS and Raman Spectroscopy). After two years of exposure, the results show that Bare Cor-Ten, cheaper than the other analyzed specimens, even though undergoes the greater mass variation, his metal release is comparable to the release of the pre-patinated samples. The behavior of pre-patinated steel, with or without beeswax covering, do not show particular difference. This exposure environment doesn’t allow a completely stabilization of the patina; nevertheless an estimate of metal release after 10 years of exposure points out that the environmental impact of Cor-Ten is very low: for example, the release of chromium in the soluble fraction is less than 10 mg if we consider an exposed wall of 10 m2.

Addizione coniugata di Michael atroposelettiva di composti 1,3-dicarbonilici su derivati maleimmidici

L'obiettivo di questa tesi sperimentale è quello di effettuare una reazione di addizione coniugata di Michael di sistemi 1,3-dicarbonilici atroposelettiva su substrati maleimmidici oppurtanamente sostituiti, catalizzata da derivati di alcaloidi naturali della Cinchona. Tale processo risulta importante ed innovativo in quanto si vuole ottenere una reazione di desimmetrizzazione atroposelettiva, contemporaneamente dell'asse prochirale e dei due atomi di carbonio del doppio legame della maleimmide stessa. Partendo dalla reazione di addizione del 2-acetilciclopetanone sulla (N-(2-tert- Butil)fenil)maleimmide, mediante reazioni di screening sono state determinate le condizioni ottimali. Si è poi proceduto a verificare l'estendibilità della reazione verso differenti substrati. Infine si è verificata la stabilità dell'asse di rotazione bloccato neosintetizzato. La sintesi di tali composti è importante per la possibilità di poter successivamente derivatizzare i gruppi sostituenti, in modo da creare building blocks per lo sviluppo di molecole ben più complesse.

Molekularer Magnetismus und Multistabilitäten in sternförmigen cyanidgebrückten Eisen- und Übergangsmetall-Komplexverbindungen

In der hier vorliegenden Arbeit wurden neue eisenhaltige Spincrossover-Komplexerndargestellt und deren magnetische Eigenschaften untersucht. Ausgehend von früheren Ergebnissen wurden verschiedene Strategien zur Optimierung der Eisen-Spincrossover Verbindungen verfolgt. Wie schon früher dokumentiert finden sich bei Eisen-Übergangsmetall Komplexen eine Vielzahl von Spincrossover Phänomenen. Ebenso gut dokumentiert sind die Möglichen Änderungen des Spin Zustandes durch äußere Einflüsse wie Temperatur, Druck oder Licht. Darauf aufbauend wurden nunrnverschiedene Eisenkomplexe synthetisiert und auf das Spincrossover Phänomen hin untersucht. Dazu wurden zum Einen Fe(II) Komplexe vom Typ [FeL1(NCS)2] (L1 = pmea, pmap, tepa and tmpa) betrachtet und zum anderen Sternförmige Fe(III) Komplexe vom Typ [M{(CN-FeIIIL2}x]y+. (M=Fe(II), Co(III), Mo(IV), Ru(II)) undrndodecanukleare Komplexe vom Typ [(L2Fe(III)NC)5Fe(II)CNCo(III)(CNFe(III)L2)5]4+. L2= Bis(R2,3,4 -salicylidenaminoalkyl-R1-amin. Thermischen Spincrossover und LIESST zeigen [3,3/N-H/Sal-H/Fe/Co]; [3,3/N-H/Sal-H/Fe/Ru]; [3,3/N-H/sal-H/Fe/Mo]; [3,3/N-H/Sal-H/Fe/W]; FeII(pmea)(SCN)2; thermischen Spinübergang zeigt [2,3/N-H/Sal-H/Fe/Fe-Co]. Die Ethylen gebrückten Komplexe zeigen weniger guten oder gar keinen Schalteffekt im Gegensatz zum Propylen gebrückten Komplexe. Fe(II)(PMEA)(SCN)2 zeigt vollständigen thermischen Spinübergang von High Spin nach Low Spin ein LIESST und einen LiPTH Effekt.

Toward a 3D in vitro model based on decellularized thymus to maintain adult thymic ephitelial cells functionality

During my PhD,I have been develop an innovative technique to reproduce in vitro the 3D thymic microenvironment, to be used for growth and differentiation of thymocytes, and possible transplantation replacement in conditions of depressed thymic immune regulation. The work has been developed in the laboratory of Tissue Engineering at the University Hospital in Basel, Switzerland, under the tutorship of Prof.Ivan Martin. Since a number of studies have suggested that the 3D structure of the thymic microenvironment might play a key role in regulating the survival and functional competence of thymocytes, I’ve focused my effort on the isolation and purification of the extracellular matrix of the mouse thymus. Specifically, based on the assumption that TEC can favour the differentiation of pre-T lymphocytes, I’ve developed a specific decellularization protocol to obtain the intact, DNA-free extracellular matrix of the adult mouse thymus. Two different protocols satisfied the main characteristics of a decellularized matrix, according to qualitative and quantitative assays. In particular, the quantity of DNA was less than 10% in absolute value, no positive staining for cells was found and the 3D structure and composition of the ECM were maintained. In addition, I was able to prove that the decellularized matrixes were not cytotoxic for the cells themselves, and were able to increase expression of MHC II antigens compared to control cells grown in standard conditions. I was able to prove that TECs grow and proliferate up to ten days on top the decellularized matrix. After a complete characterization of the culture system, these innovative natural scaffolds could be used to improve the standard culture conditions of TEC, to study in vitro the action of different factors on their differentiation genes, and to test the ability of TECs to induce in vitro maturation of seeded T lymphocytes.

Cinchona alkaloids and BINOL derivatives as privileged catalysts or ligands in asymmetric synthesis

During the last fifteen years organocatalysis emerged as a powerful tool for the enantioselective functionalization of the most different organic molecules. Both C-C and C-heteroatom bonds can be formed in an enantioselective fashion using many types of catalyst and the field is always growing. Many kind of chiral catalysts have emerged as privileged, but among them Proline, cinchona alkaloids, BINOL, and their derivatives showed to be particularly useful chiral scaffolds. This thesis, after a short presentation of many organocatalysts and activation modes, focuses mainly on cinchona alkaloid derived primary amines and BINOL derived chiral Brønsted acids, describing their properties and applications. Then, in the experimental part, these compounds are used for the catalysis of new transformations. The enantioselective Friedel-Crafts alkylation of cyclic enones with naphthols using cinchona alkaloid derived primary amines as catalysts is presented and discussed. The results of this work were very good and this resulted also in a publication. The same catalysts are then used to accomplish the enantioselective addition of indoles to cyclic enones. Many catalysts in combination with many acids as co-catalysts were tried and the reaction was fully studied. Selective N-alkylation was obtained in many cases, in combination with quite good to good enantioselectivities. Also other kind of catalysis were tried for this reaction, with interesting results. Another aza-Michael reaction between OH-free hydroxylamines and nitrostyrene using cinchona alkaloid derived thioureas is briefly discussed. Then our attention focused on Brønsted acid catalyzed transformations. With this regard, the Prins cyclization, a reaction never accomplished in an enantioselective fashion until now, is presented and developed. The results obtained are promising. In the last part of this thesis the work carried out abroad is presented. In Prof. Rueping laboratories, an enantioselective Nazarov cyclization using cooperative catalysis and the enantioselective desymmetrization of meso-hydrobenzoin catalyzed by Brønsted acid were studied.

Röntgenabsorptionsspektroskopie und magnetischer Röntgenzirkulardichroismus an dünnen Heusler-Filmen

Verbindungen aus nicht ferromagnetischen Bestandteilen, die ferromagnetische Eigenschaf-ten zeigen, sind seit Anfang des 20. Jahrhunderts bekannt und werden nach ihrem Entdecker als Heusler-Verbindungen bezeichnet. Seitdem haben sie nichts von ihrer Faszination eingebüßt, besitzen sie doch eine Fülle besonderer Eigenschaften mit Anwendungen z.B. in der Spintronik.rnAuf der Suche nach geeigneten Legierungen ist es wünschenswert, zunächst grundlegende Eigenschaften wie das magnetische Moment elementspezifisch bestimmen zu können. Hierfür sind Methoden wie Röntgenabsorptionsspektroskopie und magnetischer Röntgenzirkulardichroismus (XAS/XMCD) prädestiniert.rnIm Rahmen dieser Arbeit wurde eine Apparatur entwickelt, mit deren Hilfe XAS- und XMCD-Messungen an dünnen Heusler-Filmen durchgeführt werden können. Da Grenzflächeneigenschaften von besonderem Interesse sind, wurde der experimentelle Aufbau so gewählt, dass gleichzeitig Volumen und Oberflächeneigenschaften untersucht werden können. Durch Vergleich dieser Messdaten erhält man Zugang zu den Grenzflächeneigenschaften.rnSo konnte mit XAS-Messungen nachgewiesen werden, dass sich die chemischen Eigenschaften an der Grenzfläche mancher Filme von denen im Volumen des Films unterscheiden (Oxidation bzw. Interdiffusion der Abdeckschicht). Auch stöchiometrische Unterschiede zwischen Oberfläche und Volumen konnten so identifiziert werden.rnMit Hilfe von XMCD-Messungen wurden elementspezifische magnetische Momente bestimmt und mit theoretischen Vorhersagen verglichen. Auch hierbei konnten Oberflächen- und Volumenmomente miteinander verglichen werden. So wurde z.B. unter Verwendung einer Schichtserie die Anzahl magnetischer Totlagen an beiden Grenzflächen bestimmt. Diese Informationen sind wichtig, um die Qualität dünner Filme steigern zu können.rnDes Weiteren war es auch möglich, temperaturabhängige Änderungen in der Ni2MnGa Zustandsdichte, die von der Theorie vorhergesagt wurden, in den XAS-Spektren nachzuweisen. Schließlich wurde noch eine Methode entwickelt, die es erlaubt, unter bestimmten Voraussetzungen auf die partielle unbesetzte Zustandsdichte (PDOS) zu schließen. Dies liefert wichtige Hinweise auf Lage und Breite der bisher nur theoretisch vorhergesagten Bandlücke. Es ist mit der hier vorgestellten Methode nicht möglich, die gesamte PDOS für alle Elemente zu vermessen, doch können so relativ leicht vielversprechende Kandidaten für weitere Untersuchungen gefunden werden.rn

Traduzione di ten' oblaka na drugom beregu di zachar prilepin

Questa è la traduzione dal russo all'italiano del racconto "Ten' oblaka na drugom beregu" (L'ombra di una nuvola sull'altra riva), parte della raccolta di racconti "Vos'merka" dello scrittore Zachar Prilepin, una delle figure di maggior spicco nella scena letteraria russa contemporanea. La raccolta in questione non è mai stata tradotta verso l'italiano. Ho scelto questo racconto perché mi è sembrato particolarmente esemplificativo delle tematiche e del linguaggio dell'autore. Il mio lavoro include, oltre alla traduzione, anche un'introduzione, nella quale contestualizzo Prilepin all'interno del panorama letterario contemporaneo; e una nota alla traduzione, nella quale parlo più specificatamente di quel determinato racconto.

Addizione di Michael organocatalitica asimmetrica di composti 1,3-dicarbonilici ad orto-chinoni metidi: un nuovo e semplice approccio alla preparazione di 4H-cromeni e croman-2-oni otticamente attivi

The work described in this thesis deals with the development of the asymmetric organocatalytic conjugate addition reaction of 1,3-dicarbonyl compounds to ortho-quinone methides. Due to their instability, these synthetically appealing intermediates have not been fully exploited in catalytic asymmetric settings. In this work, the instability of ortho-quinone methides is overcome by their generation in situ under mild basic conditions, starting from the corresponding sulfonyl derivatives. The bifunctional catalysts used are able to activate both substrates for the reaction, by means of a synergic action of the two catalytic sites, inducing at the same time high enantioselection in the addition step. The reaction leads to the generation of a 2-alkylphenolic framework, featuring a chiral centre at the benzylic position. In particular, the employment of acetylacetone and Meldrum acid as nucleophiles has allowed the obtainment of 4H-chromenes and chroman-2-ones in good yields and generally excellent enantioselectivities. These compounds are synthetic precursors of several natural products, some of which showing interesting biological activity, and of some active pharmaceutical ingredients used in commercial drugs.

Ten-year results of a three-arm prospective cohort study on implants in periodontally compromised patients. Part 1: implant loss and radiographic bone loss

OBJECTIVES: The aim of this study was to compare the long-term outcomes of implants placed in patients treated for periodontitis periodontally compromised patients (PCP) and in periodontally healthy patients (PHP) in relation to adhesion to supportive periodontal therapy (SPT). MATERIAL AND METHODS: One hundred and twelve partially edentulous patients were consecutively enrolled in private specialist practice and divided into three groups according to their initial periodontal condition: PHP, moderate PCP and severe PCP. Perio and implant treatment was carried out as needed. Solid screws (S), hollow screws (HS) and hollow cylinders (HC) were installed to support fixed prostheses, after successful completion of initial periodontal therapy (full-mouth plaque score <25% and full-mouth bleeding score <25%). At the end of treatment, patients were asked to follow an individualized SPT program. At 10 years, clinical measures and radiographic bone changes were recorded by two calibrated operators, blinded to the initial patient classification. RESULTS: Eleven patients were lost to follow-up. During the period of observation, 18 implants were removed because of biological complications. The implant survival rate was 96.6%, 92.8% and 90% for all implants and 98%, 94.2% and 90% for S-implants only, respectively, for PHP, moderate PCP and severe PCP. The mean bone loss was 0.75 (+/- 0.88) mm in PHP, 1.14 (+/- 1.11) mm in moderate PCP and 0.98 (+/- 1.22) mm in severe PCP, without any statistically significant difference. The percentage of sites, with bone loss > or =3 mm, was, respectively, 4.7% for PHP, 11.2% for moderate PCP and 15.1% for severe PCP, with a statistically significant difference between PHP and severe PCP (P<0.05). Lack of adhesion to SPT was correlated with a higher incidence of bone loss and implant loss. CONCLUSION: Patients with a history of periodontitis presented a lower survival rate and a statistically significantly higher number of sites with peri-implant bone loss. Furthermore, PCP, who did not completely adhere to the SPT, were found to present a higher implant failure rate. This underlines the value of the SPT in enhancing the long-term outcomes of implant therapy, particularly in subjects affected by periodontitis, in order to control reinfection and limit biological complications.