Viral Delivery of the Fat-1 Gene to Treat Post-Traumatic Arthritis with Diet-Induced Obesity

Post-traumatic arthritis (PTA) is arthritis that develops following joint injury, including meniscus and ligament tears. Current treatments for PTA range from over-the-counter medication to knee replacement; however, in the presence of obesity, the levels of pro-inflammatory cytokines, such as interleukin-1 (IL-1) and tumor necrosis factor alpha (TNF-α,) are more elevated than in non-obese individuals. The role of fatty acids, obesity, and PTA has been examined, with omega-3 fatty acids showing promise as an anti-inflammatory after injury due to its ability to suppress IL-1 and TNF-α. Due to the difficulty in switching patients’ diets, an alternative solution to increasing omega-3 levels needs to be developed. The Fat-1 enzyme, an omega-3 desaturase that has the ability to convert omega-6 to omega-3 fatty acids, may be a good target for increasing the omega-3 levels in the body.

In the first study, we examined whether Fat-1 transgenic mice on a high-fat diet would exhibit lower levels of PTA degeneration following the destabilization of the medial meniscus (DMM). Both male and female Fat-1 and wild-type (WT) littermates were put on either a control diet (10% fat) or an omega-6 rich high-fat diet (60% fat) and underwent DMM surgery. Arthritic changes were examined 12 weeks post-surgery. Fat-1 mice on both the control and high-fat diet showed protection from PTA-related degeneration, while WT mice showed severe arthritic changes. These findings suggest that the omega-6/omega-3 ratio plays an important role in reducing PTA following injury, and demonstrates the potential therapeutic benefit of the Fat-1 enzyme in preventing PTA in both normal and obese patients following acute injury.

Following this, we needed to establish a translatable delivery mechanism for getting the Fat-1 enzyme, which is not present in mammalian cells, into patients. In the second study, we examined whether anti-inflammatory gene delivery of the Fat-1 enzyme would prevent PTA following DMM surgery. In vitro testing of both lentivirus (LV) and adeno-associated virus (AAV) was completed to confirm functionality and conformation of the Fat-1 enzyme after transduction. Male WT mice were placed on an omega-6 rich high-fat diet (60% fat) and underwent DMM surgery; either local or systemic AAV injections of the Fat-1 enzyme or Luciferase, a vector control, were given immediately following surgery. 12 weeks post-surgery, arthritic changes were assessed. The systemic administration of the Fat-1 enzyme showed protection from synovial inflammation and osteophyte formation, while administration of Luciferase did not confer protection. These findings suggest the utility of gene therapy to deliver the Fat-1 enzyme, which has potential as a therapeutic for injured obese patients for the prevention of PTA.

A new genus Abyssogena from deep-water vents and seeps

A new genus Abyssogena is established for A. phaseoliformis (Métivier, Okutani & Ohta, 1986) and A. kaikoi (Okutani & Métivier, 1986), which were previously assigned to the genus Calyptogena Dall, 1891, and also for two new species, A. southwardae and A. novacula. The most characteristic features of Abyssogena are an elongate shell up to about 280 mm in length; a pallial line starting from the ventral margin of the anterior adductor scar; secondary pallial attachment scars developed dorsal to the pallial line; radially arranged hinge teeth with a reduced anterior cardinal tooth in the right valve; and presence of an inner ctenidial demibranch only. Abyssogena occurs in deep water from 2,985 to 6,400 m and is distributed in the Pacific and Atlantic Oceans at cold seeps along continental margins and hydrothermal vents at mid-oceanic ridges. Some species have a remarkably wide geographic distribution; A. southwardae is present throughout the Atlantic and A. phaseoliformis is present in Japan, Kuril-Kamchatka, as well as Aleutian Trenches. No fossils of Abyssogena are known.

SCAPHOID AND LUNATE CARPAL MECHANICS OVER THE SPECTRUM OF HEALTHY FUNCTION

When ligaments within the wrist are damaged, the resulting loss in range of motion and grip strength can lead to reduced earning potential and restricted ability to perform important activities of daily living. Left untreated, ligament injuries ultimately lead to arthritis and chronic pain. Surgical repair can mitigate these issues but current procedures are often non-anatomic and unable to completely restore the wrist’s complex network of ligaments. An inability to quantitatively assess wrist function clinically, both before and after surgery, limits the ability to assess the response to clinical intervention. Previous work has shown that bones within the wrist move in a similar pattern across people, but these patterns remain challenging to predict and model. In an effort to quantify and further develop the understanding of normal carpal mechanics, we performed two studies using 3D in vivo carpal bone motion analysis techniques. For the first study, we measured wrist laxity and performed CT scans of the wrist to evaluate 3D carpal bone positions. We found that through mid-range radial-ulnar deviation range of motion the scaphoid and lunate primarily flexed and extended; however, there was a significant relationship between wrist laxity and row-column behaviour. We also found that there was a significant relationship between scaphoid flexion and active radial deviation range of motion. For the second study, an analysis was performed on a publicly available database. We evaluated scapholunate relative motion over a full range of wrist positions, and found that there was a significant amount of variation in the location and orientation of the rotation axis between the two bones. Together the findings from the two studies illustrate the complexity and subject specificity of normal carpal mechanics, and should provide insights that can guide the development of anatomical wrist ligament repair surgeries that restore normal function.

PROGNOSTIC FACTORS PREDICTING FUNCTIONAL OUTCOME AT FOUR MONTHS FOLLOWING ACUTE ANKLE SPRAIN

PROGNOSTIC FACTORS PREDICTING FUNCTIONAL OUTCOME AT FOUR MONTHS FOLLOWING ACUTE ANKLE SPRAINBleakley C.M.1, O'Connor S.R.1, Tully M.A.2, Rocke L.G.3, MacAuley D.C.1, Bradbury I.4, Keegan S.4, McDonough S.M.11University of Ulster, Health & Rehabilitation Sciences Research Institute, Newtownabbey, United Kingdom, 2Queen's University, UKCRC Centre of Excellence for Public Health (NI), Belfast, United Kingdom, 3Royal Victoria Hospital, Department of Emergency Medicine, Belfast, United Kingdom, 4Frontier Science (Scotland), Kincraig, Inverness-shire, United KingdomPurpose: To identify clinically relevant factors assessed following acute ankle sprain that predict functional recovery at four months post-injury.Relevance: Ankle sprains are one of the most common musculoskeletal injuries with an estimated 5000 new cases occurring each day in the United Kingdom. In the acute phase, ankle sprains may be associated with pain and loss of function. In the longer-term there is a risk of residual problems including chronic pain or reinjury. Few studies have sought to examine factors associated with a poor long-term prognosis.Participants: 101 patients (Age: Mean (SD) 25.9 (7.9) years; Body Mass Index (BMI): 25.3 (3.5) kg/m2) with an acute grade 1 or 2 ankle sprain attending an accident and emergency department or sports injury clinic. Exclusion criteria included complete (grade 3) rupture of the ankle ligament complex, bony ankle injury or multiple injuries.Methods: Participants were allocated as part of a randomised controlled trial to an accelerated intervention incorporating intermittent ice and early therapeutic exercise or a standard protection, rest, ice, compression, and elevation intervention for one week. Treatment was then standardised in both groups and consisted of ankle rehabilitation exercises focusing on muscle strengthening, neuromuscular training, and sports specific functional exercises for a period of approximately four to six weeks. On initial assessment age, gender, mechanism of injury, presence of an audible pop or snap and the presence of contact during the injury were recorded. The following factors were also recorded at baseline and at one and four weeks post-injury: weight-bearing dorsi-flexion test, lateral hop test, presence of medial pain on palpation and a positive impingement sign. Functional status was assessed using the Karlsson score at baseline, at week four and at four months. Reinjury rates were recorded throughout the intervention phase and at four months.Analysis: A mixed between-within subjects analysis of variance (ANOVA) was used to determine the effect of each factor on functional status at week four and at four months. Significance was set at a Bonferroni adjusted level of 0.0125 (0.05/4).Results: Eighty-five participants (84%) were available at final follow-up assessment. Pain on weight-bearing dorsi-flexion and lateral hop tests at week four were both associated with a lower functional score at four months post-injury (P = 0.011 and P = 0.001). No other significant interactions were observed at any other timepoint (baseline or week one). There were only two reinjuries within the four month follow-up period with a further two reported at approximately six months post-injury. We were therefore unable to determine whether any factors were associated with an increased risk of reinjury.Conclusions: Potential prognostic factors on initial or early examination after acute ankle sprain did not help predict functional recovery at four months post-injury. However, pain on weight-bearing dorsi-flexion and lateral hop tests observed at four weeks were associated with a slower rate of recovery.Implications: Some clinical tests may help identify patients at risk of poor functional recovery after acute ankle sprain. However, further work is required to examine factors which may be predictive on initial assessment.Key-words: 1. Prognostic factors 2. Recovery 3. Ankle sprainFunding acknowledgements: Physiotherapy Research Foundation, Chartered Society of Physiotherapy, Strategic Priority Fund; Department of Employment and Learning, Northern Ireland.Ethics approval: Office for Research Ethics Committee (UK).

Proprioception in ankle sprain from exercises and bandages

Ankle sprains are the most common injuries in sports, usually causing damage to the lateral ligaments. Recurrence has as usual result permanent instability, and thus loss of proprioception. This fact, together with residual symptoms, is what is known as chronic ankle instability, CAI, or FAI, if it is functional. This problem tries to be solved by improving musculoskeletal stability and proprioception by the application of bandages and performing exercises. The aim of this study has been to review articles (meta-analisis, systematic reviews and revisions) published in 2009-2015 in PubMed, Medline, ENFISPO and BUCea, using keywords such as “sprain instability”, “sprain proprioception”, “chronic ankle instability”. Evidence affirms that there does exist decreased proprioception in patients who suffer from CAI. Rehabilitation exercise regimen is indicated as a treatment because it generates a subjective improvement reported by the patient, and the application of bandages works like a sprain prevention method limiting the range of motion, reducing joint instability and increasing confidence during exercise. As podiatrists we should recommend proprioception exercises to all athletes in a preventive way, and those with CAI or FAI, as a rehabilitation programme, together with the application of bandages. However, further studies should be generated focusing on ways of improving proprioception, and on the exercise patterns that provide the maximum benefit.

Modified patch repair of femoral hernia after inguinal herniorrhaphy

Background and aim. It has been reported that femoral hernias are rather common after a previous repair of inguinal hernia. We herein present a modified patch repair technique for large femoral hernias that develop after a Lichtenstein operation for ipsilateral inguinal hernia. Patients and methods. The modified technique for femoral hernia was applied to three patients who had a Lichtenstein repair for inguinal hernia. All patients were male. Hernia sac is dissected completely and sent back into to the preperitoneal space. Special attention should be given to the prevascular component of the sac. It is dissected as deep as possible into the preperitoneal space over the femoral vein. The defect is quite wide in this particular type of femoral hernia following Lichtenstein repair. A prosthetic patch that matches the defect is prepared. The medial edge of the mesh is configured to correspond to the pubic corner and lacunar ligament. The lateral margin of the patch is cut to create several petals for inverting the mesh above and medial to the femoral vein to prevent prevascular herniation. The mesh is secured to inguinal ligament, ilioinguinal tract, lacunar ligament, and Cooper ligament. Few sutures are put on the pubic corner and lacunar ligament. Results. One patient was discharged after two hours, other two stayed overnight. Readmission because of seroma development was recorded in two cases where standard polypropylene meshes were used. No complication was observed in the other patient who received lightweight meshes. No early recurrences were recorded after 4, 9, and 30 months. Conclusion. Femoral recurrence after previous inguinal hernia repair seems to be a specific entity. It has a prevascular component and the hernia defect can be much larger than that of a primary femoral hernia. A patch repair with infra-inguinal approach can be a valuable alternative with low complication rate.

A aplicação de plasma rico em plaquetas na regeneração dos tecidos periodontais

O periodonto é uma unidade biológica e funcional, constituída pela gengiva, pelo cemento, pelo ligamento periodontal e pelo osso alveolar. O seu processo de cicatrização envolve mecanismos fisiológicos complexos que requerem a ação dos fatores de crescimento, péptidos oriundos da desgranulação das plaquetas. Neste sentido surge o Plasma Rico em Plaquetas como um produto autólogo, obtido a partir da centrifugação do sangue do próprio paciente e que visa melhorar a cicatrização dos tecidos após procedimentos enquadrados na Medicina Dentária. Esta revisão bibliográfica baseou-se numa pesquisa realizada na base de dados MEDLINE, via pubmed. Foram utilizadas as palavras-chave “plasma rich in growth factors”, “platelet-rich plasma”, “oral surgery”, “dental implants”, “sinus lift”, “third molar surgery” e “bone regeneration”. Após leitura de 40 artigos, foram descartados 9 pela sua pouca relevância no contexto. O objetivo é avaliar a efetividade da aplicação de plasma rico em plaquetas na regeneração dos tecidos periodontais em situações clínicas como alvéolos pós-extracionais, cirurgias de implantes, cirurgias de elevação do seio maxilar e na regeneração óssea. A efetividade em tecidos moles parece ser consensual. A efetividade no tecido ósseo é alvo de contradição entre os diversos autores, concluindo-se que há necessidade de mais estudos randomizados e controlados para que se possa responder à questão com evidência científica suficiente.

Considerações anatómicas sobre o envelhecimento do aparelho estomatognático

Introdução: com o crescente aumento da expectativa de vida, o conhecimento das alterações anatómicas e fisiológicas que ocorrem no aparelho estomatognático durante o envelhecimento é de suma importância para a correta avaliação do paciente idoso. Objetivos: descrição e abordagem das principais estruturas anatómicas do indivíduo, adulto e idoso. Estabelece-se uma anatomia comparativa e evolutiva durante o processo de envelhecimento. Pretende-se contribuir para o conhecimento e reflexão sobre o tema em questão e demonstrar a aplicabilidade deste conhecimento em contexto clínico. Métodos: realizou-se pesquisa bibliográfica, nas bases de dados Pubmed, b-on SciElo e Elsevier, no período entre 2006-2016. Resultados: Maxila - ocorre reabsorção óssea, alteração no contorno do arco da maxila, retrusão maxilar, rotação da maxila no sentido horário, diminuição gradual e constante do ângulo maxilar e redução vertical da altura maxilar. Mandíbula - aumento do ângulo da mandíbula, diminuição da densidade e volume ósseo. Articulação gonfose e Articulação Temporo-Mandibular - pode ocorrer tanto anquilose, como perda das estruturas de suporte. Observa-se degeneração e/ou perfuração do disco radicular e alteração do formato do côndilo. Dentes - cáries radiculares, fraturas dentárias e desgaste dentário. Ocorrem modificações histológicas no esmalte, dentina e polpa dentária. Periodonto: reabsorção do osso alveolar, gengiva atrófica com tendência a migração apical, deposição apical das camadas incrementais e desgaste de cemento exposto, ligamento periodontal fino, irregular e diminuição do espaço periodontal. Conclusões: as alterações anatómicas decorrentes do envelhecimento fisiológico são múltiplas. O Médico Dentista diante de um paciente idoso, deverá conhecer e distinguir entre uma alteração decorrente do envelhecimento fisiológico e uma alteração patológica, para o correto diagnóstico clínico e uma excelente decisão terapêutica. O Médico Dentista deverá contribuir para o envelhecimento saudável e para tal deve ser conhecedor em pleno da temática do presente trabalho.

Fraturas dentárias

Uma lesão traumática é, a seguir à cárie dentária, um dos problemas mais comuns da saúde oral. O traumatismo dentário consiste numa agressão que afeta os dentes ou os tecidos de suporte, podendo levar ao rompimento do ligamento periodontal, fratura dentária, fratura óssea ou alterações pulpares. Este problema causa desconforto físico, emocional e comprometimento estético. Quando os traumatismos afetam os tecidos duros ou polpa denominam-se de fraturas dentárias. Estas podem ser divididas em fraturas coronárias de esmalte; fraturas coronárias de esmalte e dentina sem exposição pulpar; fraturas coronárias de esmalte e dentina com exposição pulpar; fraturas corono-radiculares de esmalte, dentina e cemento sem exposição pulpar; fraturas corono-radiculares com exposição pulpar e fratura radicular envolvendo cemento, dentina e polpa. O objetivo deste trabalho monográfico foi fazer uma revisão bibliográfica de estudos científicos sobre fraturas dentárias. Assim, serão abordados os diversos tipos de fraturas dentárias, as suas etiologias, prevalências e fatores associados, também definir planos de tratamento, técnicas de restauração direta de fraturas coronárias e possíveis medidas de prevenção. A pesquisa bibliográfica para esta revisão foi realizada em bases eletrónicas de referência como Pubmed, Scielo, selecionando artigos entre os anos 2006 e 2016. Foram também utilizados como elementos de pesquisa o site Dental Trauma Guide (DTG), o site International Association of Dental Traumatology (IADT), livros da especialidade existentes na Biblioteca da Universidade Fernando Pessoa que embora com datas de publicação mais antigas (2001) foram imprescindíveis para o desenvolvimento da monografia. A pesquisa foi realizada em duas línguas, português e inglês. Como conclusão pode-se dizer que nos dias de hoje, o médico dentista tem muitas opções de tratamento de dentes fraturados. Para restaurar a fratura o médico pode optar por colar o fragmento, restaurar usando uma matriz guia ou restaurar à mão livre. A escolha da técnica deve ser estudada de acordo com cada paciente e suas expectativas.

Quantification of variable palmar ligaments around the triquetrum-hamate joint determined by lunate type

The ligaments of the wrist are highly variable and poorly described, which is more obvious on the ulnar side of the wrist. Previous studies highlighted the potential differences within the ligaments of the wrist but no consensus has been reached. Poor tissue description and inconsistent use of terminology hindered the reproducibility of the results. Improved understanding of the morphological variations between carpal bones may facilitate improved understanding of the ligamentous structure within the wrist. This study aims to identify the potential variations between carpal bones that could be used to separate palmar ligamentous patterns around the triquetrum-hamate joint into subgroups within the sample population. Investigations were performed following a detailed nomenclature and a clear definition of ligamentous structures to facilitate detailed description and reproducible results. Quantitative analyses were conducted using 3D modelling technique. Histological sections were then analysed to identify the structure of each ligamentous attachment. Variable patterns of ligamentous attachments were identified. Differences were not only obvious between samples but also between the right and left hands of the same person. These identifications suggested that the palmar ligamentous patterns around the triquetrum-hamate joint are best described as a spectrum with a higher affinity of the triquetrum-hamate-capitate ligament and the lunate-triquetrum ligament to be associated with type I lunate wrists on one extreme and type II lunate wrists with the palmar triquetrum-hamate ligament, triquetrum-hamate-capitate ligament and palmar radius-lunate-triquetrum ligament attachments at the other extreme. Histological analyses confirmed pervious established work regarding the mechanical role of ligaments in wrist joint biomechanics. Also, there were no significant differences between the quantitative data obtained from the Genelyn-embalmed and unembalmed specimens (p>0.05). The current study demonstrated variable ligamentous patterns that suggest different bone restraints and two different patterns of motion. These findings support previous suggestions regarding separating the midcarpal joint into two distinct functional types. Type I wrists were identified with ligamentous attachments that are suggestive of rotating/translating hamate whilst type II wrists identified with ligamentous attachments that are suggestive of flexing/extending hamate motion based upon the patterns of the ligamentous attachments in relation to the morphological features of the underlying lunate type of the wrist. This opens the horizon for particular consideration and/or modification of surgical procedures, which may enhance the clinical management of wrist dysfunction.

A geometric study of liquid retention in open-cell metal foams

Open-cell metal foams show promise as an emerging novel material for heat exchanger applications. The high surface-area-to-volume ratio suggests increased compactness and decrease in weight of heat exchanger designs. However, the metal foam structure appears conducive to condensate retention, which would degenerate heat transfer performance. This research investigates the condensate retention behavior of aluminum open-cell metal foams through the use of static dip tests and geometrical classification via X-ray Micro-Computed Tomography. Aluminum open-cell metal foam samples of 5, 10, 20, and 40 pores per inch (PPI), all having a void fraction greater than 90%, were included in this investigation. In order to model the condensate retention behavior of metal foams, a clearer understanding of the geometry was required. After exploring the ideal geometries presented in the open literature, X-ray Micro-Computed Tomography was employed to classify the actual geometry of the metal foam samples. The images obtained were analyzed using specialized software from which geometric information including strut length and pore shapes were extracted. The results discerned a high variability in ligament length, as well as features supporting the ideal geometry known as the Weaire-Phelan unit cell. The static dip tests consisted of submerging the metal foam samples in a liquid, then allowing gravity-induced drainage until steady-state was reached and the liquid remaining in the metal foam sample was measured. Three different liquids, water, ethylene glycol, and 91% isopropyl alcohol, were employed. The behaviors of untreated samples were compared to samples subjected to a Beomite surface treatment process, and no significant differences in retention behavior were discovered. The dip test results revealed two distinct regions of condensate retention, each holding approximately half of the total liquid retained by the sample. As expected, condensate retention increased as the pores sizes decreased. A model based on surface tension was developed to predict the condensate retention in the metal foam samples and verified using a regular mesh. Applying the model to both the ideal and actual metal foam geometries showed good agreement with the dip test results in this study.

Relação entre caracteres morfológicos e produtivos em vacas Holstein-Frísia em S. Miguel

Dissertação de Mestrado, Engenharia Zootécnica, 18 de Julho de 2016, Universidade dos Açores.