Great characters of the New Testament /

"Reprinted June 1925"--T.p. verso.

Dynamically balanced and plausible trajectory planning for human-like characters

International audience

Variation, correlation and heritability of interest characters for selection of African eggplant

The eggplant ( Solanum aethiopicum ) is the species of the Solanum genus, whose geographical distribution is broadest. It is grown throughout tropical Africa, and includes three groups of cultivars commonly called African or indigenous eggplant. Kumba group or “bitter eggplant” is an important Solanaceous vegetable crop in Burkina Faso. The objective of this study was to determine genetic variability, strength of association and level of heritability among agronomic interest traits. Phenotypic and genotypic variations and heritability of 14 traits were estimated in 61 accessions at Institut de Développement Rural (IDR), Gampela in Burkina Faso. High phenotypic and genotypic coefficients of variation were observed for fruit diameter, number of seeds per fruit, fruit weight, leaf blade length and width, and height at flowering. In addition, genetic and phenotypic variances were high for the number of seed, fruit weight, plant height at flowering and days to 50% flowering. High heritability estimates were recorded for all traits. Fruit weight showed a positive association with fruit diameter and thickness. The fifty percent flowering cycle registered positive correlations with plant height and fruit diameter. Fruit number showed a negative association with fruit weight and diameter, and 50% flowering cyle.

Larval development of Notolopas brasiliensis Miers, 1886 (Brachyura: Majoidea: Pisidae) described from laboratory reared material and a reappraisal of the characters of Pisidae

O completo desenvolvimento larval de Notolopas brasiliensis é descrito, a partir de material criado em laboratório, com ênfase na morfologia externa de Majoidea e comparado aos demais gêneros de Pisidae. O desenvolvimento larval de N. brasiliensis consiste em dois estágios de zoea e um de megalopa. A duração media de cada estágio foi de 4.2 ± 1.0 dias para a Zoea I e 3.8 ± 0.7 dias para a Zoea II, a megalopa aparece entre 8.1 ± 0.4 dias após a eclosão. Os caracteres previamente utilizados para definir as formas larvais de Pisidae ou são simplesiomórficos ou altamente homoplásticos. Foi observado que não existe um conjunto de caracteres capazes de definir Pisidae até o presente.Contudo foi mostrado que uma combinação de caracteres pode ser utilizada para diferenciar Notolopas dos demais gêneros da família.

Self-ordered pointing as a test of working memory in typically developing children

The self-ordered pointing test (SOPT; Petrides & Milner, 1982) is a test of non-spatial executive working memory requiring the ability to generate and monitor a sequence of responses. Although used with developmental clinical populations there are few normative data against which to compare atypical performance. Typically developing children (5!11 years) and young adults performed two versions of the SOPT, one using pictures of familiar objects and the other hard-to-verbalise abstract designs. Performance improved with age but the children did not reach adult levels of performance. Participants of all ages found the object condition easier than the abstract condition, suggesting that verbal processes are utilised by the SOPT. However, performance on the task was largely independent from verbal and nonverbal cognitive ability. Overall the results suggest that the SOPT is a sensitive measure of executive working memory.

Intelligent system for interaction with virtual characters based on volumetric sensors

Dissertação de Mestrado, Engenharia Elétrica e Eletrónica, Instituto Superior de Engenharia, Universidade do Algarve, 2015

Synthesis of Ordered Mesoporous Carbon Materials by Dry Etching

A novel synthesis method for ordered mesoporous carbons is presented. The inverse replication of a silica template was achieved using the carbonization of sucrose within mesoporous KIT-6. Instead of liquid acid etching, as in classical nanocasting, a novel dry chlorine etching procedure for template removal is presented for the first time. The resultant ordered mesostructured carbon material outperforms carbons obtained by conventional hard templating with respect to high specific micro- and mesopore volumes (0.6 and 1.6 cm3 g−1, respectively), due to the presence of a hierarchical pore system. A high specific surface area of 1671 m2 g−1 was achieved, rendering this synthesis route a highly convenient method to produce ordered mesoporous carbons.

Ordered mesoporous titanium oxide for thin film microbatteries with enhanced lithium storage

A 3D mesoporous TiO2 material with well-developed mesostructure is prepared in the form of a binder-free thin (100 nm) film and studied as potential candidate for the negative electrode in lithium microbatteries. By appropriate thermal treatments, the selected crystal structure (anatase, rutile, or amorphous), and micro-/mesostructure of the materials was obtained. The effects of voltage window and prelithiation treatment improved first cycle reversibility up to 86% and capacity retention of 90% over 100 cycles. After a prolonged intercalation of lithium ions in ordered mesoporous TiO2 appeared small particles assigned to Li2Ti2O4 with cubic structure as observed from ex-situ TEM micrographs. This study highlights the flexibility of the potential window to which the electrode can operate. Maximum capacity values over 100 cycles of 470 μA h cm−2 μm−1 and 177 μA h cm−2 μm−1 are obtained for voltage ranges of 0.1–2.6 V and 1.0–2.6 V, respectively. The observed values are between 6 and 2 times higher than those obtained for films with 600 nm (80 μA h cm−2 μm−1) and 900 nm (92 μA h cm−2 μm−1) lengths. This indicates that 100 nm thin TiO2 films with high accessibility show finite-length type diffusion which is interesting for this particular application.

Demonstration of (In, Ga)N/GaN Core-Shell Micro Light-Emitting Diodes Grown by Molecular Beam Epitaxy on Ordered MOVPE GaN Pillars

This work reports on the growth of (In, Ga)N core−shell micro pillars by plasma-assisted molecular beam epitaxy using an ordered array of GaN cores grown by metal organic vapor phase epitaxy as a template. Upon (In, Ga)N growth, core−shell structures with emission at around 3.0 eV are formed. Further, the fabrication of a core−shell pin structure is demonstrated.

The families of plants, with their natural characters, according to the number, figure, situation, and proportion of all the parts of fructification.

"An alphabetical catalogue of English and Scotch names of plants ...": vol. II, p. [809]-840.

Estrutura, personagens e enganos: introdução à leitura de As Báquides de Plauto /// Structure, characters and deceptions: an introduction to the study of Plautus’ Bacchides

Esta publicação apresenta um estudo sobre as As Báquides de Plauto, no qual se analisam o contexto e as características da peça, a estrutura e as personagens, e ainda o problema da originalidade plautina na conceptualização do ‘terceiro engano’.

Hydrazine-hydrate intercalated halloysite under controlled-rate thermal analysis conditions

The thermal behaviour of halloysite fully expanded with hydrazine-hydrate has been investigated in nitrogen atmosphere under dynamic heating and at a constant, pre-set decomposition rate of 0.15 mg min-1. Under controlled-rate thermal analysis (CRTA) conditions it was possible to resolve the closely overlapping decomposition stages and to distinguish between adsorbed and bonded reagent. Three types of bonded reagent could be identified. The loosely bonded reagent amounting to 0.20 mol hydrazine-hydrate per mol inner surface hydroxyl is connected to the internal and external surfaces of the expanded mineral and is present as a space filler between the sheets of the delaminated mineral. The strongly bonded (intercalated) hydrazine-hydrate is connected to the kaolinite inner surface OH groups by the formation of hydrogen bonds. Based on the thermoanalytical results two different types of bonded reagent could be distinguished in the complex. Type 1 reagent (approx. 0.06 mol hydrazine-hydrate/mol inner surface OH) is liberated between 77 and 103°C. Type 2 reagent is lost between 103 and 227°C, corresponding to a quantity of 0.36 mol hydrazine/mol inner surface OH. When heating the complex to 77°C under CRTA conditions a new reflection appears in the XRD pattern with a d-value of 9.6 Å, in addition to the 10.2 Ĺ reflection. This new reflection disappears in contact with moist air and the complex re-expands to the original d-value of 10.2 Å in a few h. The appearance of the 9.6 Å reflection is interpreted as the expansion of kaolinite with hydrazine alone, while the 10.2 Å one is due to expansion with hydrazine-hydrate. FTIR (DRIFT) spectroscopic results showed that the treated mineral after intercalation/deintercalation and heat treatment to 300°C is slightly more ordered than the original (untreated) clay.

An infrared spectroscopic study of the some Autunite minerals

A series of selected autunites with phosphate as the anion have been studied using infrared spectroscopy. Each autunite mineral has its own characteristic spectrum. The spectra for different autunites with the same composition are different. It is proposed that this difference is due to the structure of water and hydrated cations in the interlayer region between the uranyl phosphate sheets. This structure is different for different autunites. The position of the water hydroxyl stretching bands is related to the strength of the hydrogen bonds as determined by hydrogen bond distance. The highly ordered structure of water is also observed in the water HOH bending modes where a high wavenumber bands are observed. The phosphate and uranyl stretching vibrations overlap and are obtained by curve resolution.

A Method of Preparing Future Hourly Weather Data for the Study of Global Warming Impact on the Built Environment

The dynamic interaction between building systems and external climate is extremely complex, involving a large number of difficult-to-predict variables. In order to study the impact of global warming on the built environment, the use of building simulation techniques together with forecast weather data are often necessary. Since all building simulation programs require hourly meteorological input data for their thermal comfort and energy evaluation, the provision of suitable weather data becomes critical. Based on a review of the existing weather data generation models, this paper presents an effective method to generate approximate future hourly weather data suitable for the study of the impact of global warming. Depending on the level of information available for the prediction of future weather condition, it is shown that either the method of retaining to current level, constant offset method or diurnal modelling method may be used to generate the future hourly variation of an individual weather parameter. An example of the application of this method to the different global warming scenarios in Australia is presented. Since there is no reliable projection of possible change in air humidity, solar radiation or wind characters, as a first approximation, these parameters have been assumed to remain at the current level. A sensitivity test of their impact on the building energy performance shows that there is generally a good linear relationship between building cooling load and the changes of weather variables of solar radiation, relative humidity or wind speed.