Writing in French in secondary schools in England and Germany: are the British really 'bad language learners’?

It is widely assumed that the British are poorer modern foreign language (MFL) learners than their fellow Europeans. Motivation has often been seen as the main cause of this perceived disparity in language learning success. However, there have also been suggestions that curricular and pedagogical factors may play a part. This article reports a research project investigating how German and English 14- to 16-year-old learners of French as a first foreign language compare to one another in their vocabulary knowledge and in the lexical diversity, accuracy and syntactic complexity of their writing. Students from comparable schools in Germany and England were set two writing tasks which were marked by three French native speakers using standardised criteria aligned to the Common European Framework of Reference (CEF). Receptive vocabulary size and lexical diversity were established by the X_lex test and a verb types measure respectively. Syntactic complexity and formal accuracy were respectively assessed using the mean length of T-units (MLTU) and words/error metrics. Students' and teachers' questionnaires and semi-structured interviews were used to provide information and participants' views on classroom practices, while typical textbooks and feedback samples were analysed to establish differences in materials-related input and feedback in the two countries. The German groups were found to be superior in vocabulary size, and in the accuracy, lexical diversity and overall quality – but not the syntactic complexity – of their writing. The differences in performance outcomes are analysed and discussed with regard to variables related to the educational contexts (e.g. curriculum design and methodology).

A Lab-in-a-briefcase for rapid prostate specific antigen (PSA) screening from whole blood

We present a new concept for rapid and fully portable Prostate Specific Antigen (PSA) measurement, termed “Lab-in-a-Briefcase”, which integrates an affordable microfluidic ELISA platform utilising a melt-extruded fluoropolymer Micro Capillary Film (MCF) containing 10 bore, 200 μm internal diameter capillaries, a disposable multi-syringe aspirator (MSA) plus a sample tray pre-loaded with all required immunoassay reagents, and a portable film scanner for colorimetric signal digital quantitation. Each MSA can perform 10 replicate microfluidic immunoassays on 8 samples, allowing 80measurements to be made in less than 15 minutes based on semi-automated operation and norequirement of additional fluid handling equipment. An assay was optimised for measurement of a clinically relevant range of PSA from 0.9 to 60.0 ng/ml in 15 minutes with CVs in the order of 5% based on intra-assay variability when read using a consumer flatbed film scanner. The PSA assay performance in the MSA remained robust in the presence of undiluted or 1:2 diluted human serum or whole blood, and the matrix effect could simply be overcome by extending sample incubation times. The PSA "Lab-in-a-briefcase" is particularly suited to a low-resource health setting where diagnostic labs and automated immunoassay systems are not accessible, by allowing PSA measurement outside the laboratory using affordable equipment.

Progress report on longitudinal and cross-sectional study of carbon disclosure strategies: evidence from UK listed companies

Global warming has attracted attention from all over the world and led to the concern about carbon emission. Kyoto Protocol, as the first major international regulatory emission trading scheme, was introduced in 1997 and outlined the strategies for reducing carbon emission (Ratnatunga et al., 2011). As the increased interest in carbon reduction the Protocol came into force in 2005, currently there are already 191 nations ratifying the Protocol(UNFCCC, 2012). Under the cap-and-trade schemes, each company has its carbon emission target. When company’s carbon emission exceeds the target the company will either face fines or buy emission allowance from other companies. Thus unlike most of the other social and environmental issues carbon emission could trigger cost for companies in introducing low-emission equipment and systems and also emission allowance cost when they emit more than their targets. Despite the importance of carbon emission to companies, carbon emission reporting is still operating under unregulated environment and companies are only required to disclose when it is material either in value or in substances (Miller, 2005, Deegan and Rankin, 1997). Even though there is still an increase in the volume of carbon emission disclosures in company’s financial reports and stand-alone social and environmental reports to show their concern of the environment and also their social responsibility (Peters and Romi, 2009), the motivations behind corporate carbon emission disclosures and whether carbon disclosures have impact on corporate environmental reputation and financial performance have not yet to explore. The problems with carbon emission lie on both the financial side and non-financial side of corporate governance. On one hand corporate needs to spend money in reducing carbon emission or paying penalties when they emit more than allowed. On the other hand as the public are more interested in environmental issues than before carbon emission could also impact on the image of corporate regarding to its environmental performance. The importance of carbon emission issue are beginning to be recognized by companies from different industries as one of the critical issues in supply chain management (Lee, 2011) and 80% of companies analysed are facing carbon risks resulting from emissions in the companies’ supply chain as shown in a study conducted by the Investor Responsibility Research Centre Institute for Corporate Responsibility (IRRCI) and over 80% of the companies analysed found that the majority of greenhouse gas (GHG) emission are from electricity and other direct suppliers (Trucost, 2009). The review of extant literature shows the increased importance of carbon emission issues and the gap in the study of carbon reporting and disclosures and also the study which links corporate environmental reputation and corporate financial performance with carbon reporting (Lohmann, 2009a, Ratnatunga and Balachandran, 2009, Bebbington and Larrinaga-Gonzalez, 2008). This study would focus on investigating the current status of UK carbon emission disclosures, the determinant factors of corporate carbon disclosure, and the relationship between carbon emission disclosures and corporate environmental reputation and financial performance of UK listed companies from 2004-2012 and explore the explanatory power of classical disclosure theories.

Resources, staff beliefs and organizational culture: factors in the use of information and communication technology for adults with intellectual disabilities

Background  Access to, and the use of, information and communication technology (ICT) is increasingly becoming a vital component of mainstream life. First-order (e.g. time and money) and second-order factors (e.g. beliefs of staff members) affect the use of ICT in different contexts. It is timely to investigate what these factors may be in the context of service provision for adults with intellectual disabilities given the role ICT could play in facilitating communication and access to information and opportunities as suggested in Valuing People. Method  Taking a qualitative approach, nine day service sites within one organization were visited over a period of 6 months to observe ICT-related practice and seek the views of staff members working with adults with intellectual disabilities. All day services were equipped with modern ICT equipment including computers, digital cameras, Internet connections and related peripherals. Results  Staff members reported time, training and budget as significant first-order factors. Organizational culture and beliefs about the suitability of technology for older or less able service users were the striking second-order factors mentioned. Despite similar levels of equipment, support and training, ICT use had developed in very different ways across sites. Conclusion  The provision of ICT equipment and training is not sufficient to ensure their use; the beliefs of staff members and organizational culture of sites play a substantial role in how ICT is used with and by service users. Activity theory provides a useful framework for considering how first- and second-order factors are related. Staff members need to be given clear information about the broader purpose of activities in day services, especially in relation to the lifelong learning agenda, in order to see the relevance and usefulness of ICT resources for all service users.

Up-scaled synthesis process of sulphur-based thermoelectric materials

The scale up of Spark Plasma Sintering (SPS) for the consolidation of large square monoliths (50 × 50 × 3 mm3) of thermoelectric material is demonstrated and the properties of the fabricated samples compared with those from laboratory scale SPS. The SPS processing of n-type TiS2 and p-type Cu10.4Ni1.6Sb4S13 produces highly dense compacts of phase pure material. Electrical and thermal transport property measurements reveal that the thermoelectric performance of the consolidated n- and p-type materials is comparable with that of material processed using laboratory scale SPS, with ZT values that approach 0.8 and 0.35 at 700 K for Cu10.4Ni1.6Sb4S13 and TiS2, respectively. Mechanical properties of the consolidated materials shows that large-scale SPS processing produces highly homogeneous materials with hardness and elastic moduli that deviate little from values obtained on materials processed on the laboratory scale.

Effect of temperature and strain rate on the compressive behaviour of supramolecular polyurethane

Supramolecular polyurethanes (SPUs) possess thermoresponsive and thermoreversible properties, and those characteristics are highly desirable in both bulk commodity and value-added applications such as adhesives, shape-memory materials, healable coatings and lightweight, impact-resistant structures (e.g. protection for mobile electronics). A better understanding of the mechanical properties, especially the rate and temperature sensitivity, of these materials are required to assess their suitability for different applications. In this paper, a newly developed SPU with tuneable thermal properties was studied, and the response of this SPU to compressive loading over strain rates from 10−3 to 104 s−1 was presented. Furthermore, the effect of temperature on the mechanical response was also demonstrated. The sample was tested using an Instron mechanical testing machine for quasi-static loading, a home-made hydraulic system for moderate rates and a traditional split Hopkinson pressure bars (SHPBs) for high strain rates. Results showed that the compression stress-strain behaviour was affected significantly by the thermoresponsive nature of SPU, but that, as expected for polymeric materials, the general trends of the temperature and the rate dependence mirror each other. However, this behaviour is more complicated than observed for many other polymeric materials, as a result of the richer range of transitions that influence the behaviour over the range of temperatures and strain rates tested.

FT-IR spectroscopy assessment of aesthetic dental materials irradiated with low-dose therapeutic ionizing radiation

The aim of the present study was to evaluate the effects of low-dose therapeutic ionizing radiation on different aesthetic dental materials. Forty five specimens (n = 45) of three different aesthetic restorative materials were prepared and randomly divided into five groups: G1 (control group); G2, G3, G4, G5 experimental groups irradiated respectively with 0.25, 0.50, 0.75, and 1.00 Gy of gamma radiation by the (60)Co teletherapy machine. Chemical analyses were performed using a FT-IR Nicolet 520 spectrophotometer with reflectance diffuse technique. Even a minimal exposition at ionizing radiation in therapeutic doses can provide chemical changes on light-cured composite resins. The three studied restorative materials showed changes after exposure at gamma radiation, however the increase of the radiation dose did not contribute to an increase in this effect.

MACHINE VISION FOR AUTOMATICVISUAL INSPECTION OF WOODENRAILWAY SLEEPERS USING UNSUPERVISED NEURAL NETWORKS

The motivation for this thesis work is the need for improving reliability of equipment and quality of service to railway passengers as well as a requirement for cost-effective and efficient condition maintenance management for rail transportation. This thesis work develops a fusion of various machine vision analysis methods to achieve high performance in automation of wooden rail track inspection.The condition monitoring in rail transport is done manually by a human operator where people rely on inference systems and assumptions to develop conclusions. The use of conditional monitoring allows maintenance to be scheduled, or other actions to be taken to avoid the consequences of failure, before the failure occurs. Manual or automated condition monitoring of materials in fields of public transportation like railway, aerial navigation, traffic safety, etc, where safety is of prior importance needs non-destructive testing (NDT).In general, wooden railway sleeper inspection is done manually by a human operator, by moving along the rail sleeper and gathering information by visual and sound analysis for examining the presence of cracks. Human inspectors working on lines visually inspect wooden rails to judge the quality of rail sleeper. In this project work the machine vision system is developed based on the manual visual analysis system, which uses digital cameras and image processing software to perform similar manual inspections. As the manual inspection requires much effort and is expected to be error prone sometimes and also appears difficult to discriminate even for a human operator by the frequent changes in inspected material. The machine vision system developed classifies the condition of material by examining individual pixels of images, processing them and attempting to develop conclusions with the assistance of knowledge bases and features.A pattern recognition approach is developed based on the methodological knowledge from manual procedure. The pattern recognition approach for this thesis work was developed and achieved by a non destructive testing method to identify the flaws in manually done condition monitoring of sleepers.In this method, a test vehicle is designed to capture sleeper images similar to visual inspection by human operator and the raw data for pattern recognition approach is provided from the captured images of the wooden sleepers. The data from the NDT method were further processed and appropriate features were extracted.The collection of data by the NDT method is to achieve high accuracy in reliable classification results. A key idea is to use the non supervised classifier based on the features extracted from the method to discriminate the condition of wooden sleepers in to either good or bad. Self organising map is used as classifier for the wooden sleeper classification.In order to achieve greater integration, the data collected by the machine vision system was made to interface with one another by a strategy called fusion. Data fusion was looked in at two different levels namely sensor-level fusion, feature- level fusion. As the goal was to reduce the accuracy of the human error on the rail sleeper classification as good or bad the results obtained by the feature-level fusion compared to that of the results of actual classification were satisfactory.

Accelerated aging of thick glass second surface silvered reflectors under sandstorm conditions

Concentrated solar power systems are expected to be sited in desert locations where the direct normal irradiation is above 1800 kWh/m2.year. These systems include large solar collector assemblies, which account for a significant share of the investment cost. Solarreflectors are the main components of these solar collector assemblies and dust/sand storms may affect their reflectance properties, either by soiling or by surface abrasion. While soiling can be reverted by cleaning, surface abrasion is a non reversible degradation.The aim of this project was to study the accelerated aging of second surface silvered thickglass solar reflectors under simulated sandstorm conditions and develop a multi-parametric model which relates the specular reflectance loss to dust/sand storm parameters: wind velocity, dust concentration and time of exposure. This project focused on the degradation caused by surface abrasion.Sandstorm conditions were simulated in a prototype environmental test chamber. Material samples (6cm x 6cm) were exposed to Arizona coarse test dust. The dust stream impactedthese material samples at a perpendicular angle. Both wind velocity and dust concentrationwere maintained at a stable level for each accelerated aging test. The total exposure time in the test chamber was limited to 1 hour. Each accelerated aging test was interrupted every 4 minutes to measure the specular reflectance of the material sample after cleaning.The accelerated aging test campaign had to be aborted prematurely due to a contamination of the dust concentration sensor. A robust multi-parametric degradation model could thus not be derived. The experimental data showed that the specular reflectance loss decreasedeither linearly or exponentially with exposure time, so that a degradation rate could be defined as a single modeling parameter. A correlation should be derived to relate this degradation rate to control parameters such as wind velocity and dust/sand concentration.The sandstorm chamber design would have to be updated before performing further accelerated aging test campaigns. The design upgrade should improve both the reliability of the test equipment and the repeatability of accelerated aging tests. An outdoor exposure test campaign should be launched in deserts to learn more about the intensity, frequencyand duration of dust/sand storms. This campaign would also serve to correlate the results of outdoor exposure tests with accelerated exposure tests in order to develop a robust service lifetime prediction model for different types of solar reflector materials.

Maternal health care professionals perspective on the provision and use of antenatal and delivery care : a qualitative descriptive study in rural Vietnam

Background. High quality maternal health care is an important tool to reduce maternal and neonatal mortality. Services offered should be evidence based and adapted to the local setting. This qualitative descriptive study explored the perspectives and experiences of midwives, assistant physicians and medical doctors on the content and quality of maternal health care in rural Vietnam. Method. The study was performed in a rural district in northern Vietnam. Four focus group discussions with health care professionals at primary health care level were conducted. The data was analysed using qualitative manifest and latent content analysis. Result. Two main themes emerged: "Contextual conditions for maternal health care" and "Balancing between possibilities and constraints". Contextual conditions influenced both pregnant women's use of maternal health care and health care professionals' performance. The study participants stated that women's uses of maternal health care were influenced by economical constraints and cultural norms that impeded their autonomy in relation to childbearing. Structural constraints within the health care system included inadequate financing of the primary health care, resulting in lack of human resources, professional re-training and adequate equipment. Conclusion. Contextual conditions strongly influenced the performance and interaction between pregnant women and health care professionals within antenatal care and delivery care in a rural district of Vietnam. Although Vietnam is performing comparatively well in terms of low maternal and child mortality figures, this study revealed midwives' and other health care professionals' perceived difficulties in their daily work. It seemed maternal health care was under-resourced in terms of staff, equipment and continuing education activities. The cultural setting in Vietnam constituting a strong patriarchal society and prevailing Confucian norms limits women's autonomy and reduce their possibility to make independent decisions about their own reproductive health. This issue should be further addressed by policy-makers. Strategies to reduce inequities in maternal health care for pregnant women are needed. The quality of client-provider interaction and management of pregnancy may be strengthened by education, human resources, re-training and provision of essential equipment.

Bringing Japanese manufacturing systems to America: the feasibility of implementing just-in-time production in the United States

This paper addresses the feasibility of implementing Japanese manufacturing systems in the United States. The recent success of Japanese transplant companies suggests that Just-In-Time (JIT) production is possible within America's industrial environment. Once American workers receive proper training, they have little difficulty participating in rapid setup procedures and utilizing the kanban system. Japanese transplants are gradually developing Japanese-style relationships with their American supplier companies by initiating long-term, mutually beneficial agreements. They are also finding ways to cope with America's problem of distance, which is steadily decreasing as an obstacle to JIT delivery. American companies, however, encounter Significant problems in trying to convert traditionally organized, factories to the JIT system. This paper demonstrates that it is both feasible and beneficial for American manufacturers to implement JIT production techniques. Many of the difficulties manufacturers experience center around a general lack of information about JIT. Once a company realizes its potential for setup-time reduction, a prerequisite for the JIT system, workers and managers can work together to create a new process for handling equipment changeover. Significant results are possible with minimal investment. Also, supervisors often do not realize that the JIT method of ordering goods from suppliers is compatible with current systems. This "kanban system" not only enhances current systems but also reduces the amount of paperwork and scheduling involved. When arranging JlT delivery of supplier goods, American manufacturers tend to overlook important aspects of JIT supplier management. However, by making long-tenn commitments, initiating the open exchange of information, assisting suppliers in reaching new standards of performance, increasing the level of conununication, and relying more on suppliers' engineering capabilities, even American manufacturers can develop Japanese-style supplier relationships that enhance the effectiveness of the system.

Theoretical and experimental optical holography

The intent of this paper is to present an analysis of optical holography. Both the physical theory behind holography and the experimental techniques used in making holograms will be presented. To accomplish this goal, the paper is divided into two independent sections: the theoretical section followed by the experimental section. Each section is intended to be a complete unit. The Theoretical Section is an exposure to the theory behind holography. This consists of a review of the concepts of interference and diffraction. followed by a brief review of partial coherence. The remaining part of the Theoretical Section is devoted to the mathematical analysis of optical holography. The Experimental Section begins with an introduction to the equipment and facilities currently available for optical holography at Colby College. Holographic procedures is dominated by the description of transmission holography (v.s. reflection. or white-light. holography). After these general holographic procedures a few variations on the basic transmission hologram are presented. The experimental section will end with an introduction to holographic interferometry, a major application of holographic techniques.

Como desenvolver e implementar um programa de segurança empresarial - o caso da fundação getulio vargas

A Segurança Empresarial é um programa preventivo que visa proteger os valores de uma empresa, para preservação das condições operacionais dentro da normalidade. As empresas estão sujeitas a ameaças relacionadas às suas atividades no mercado em que atuam. Muitas dessas ameaças são conhecidas e identificadas e, dentro do possível, é estabelecido um programa de proteção de seus interesses. Entretanto, as ameaças aos demais bens da empresa não são evidentes, nem perceptíveis tão facilmente. As medidas tomadas para prevenir a efetivação dessas ameaças, por meio de um Programa de Segurança Empresarial ou para minorar os problemas decorrentes da concretização dessas ameaças, até a volta às condições habituais de operação das empresas, por meio da execução de um Plano de Contingência, são vistas, não raramente, como despesas e poucas vezes como investimento com retomo. Nem geram resultados operacionais para a empresa. o objetivo final desta dissertação de mestrado foi estabelecer um Programa de Segurança Empresarial para a Fundação Getulio Vargas - FGV, recomendando a revisão das normas e procedimentos de segurança que comporão o Manual de Segurança e sugerir que a FGV o inclua no Plano Estratégico. Para alcançar o objetivo final. foram definidos: Conceitos Básicos de Segurança e Contingência; Critérios de Classificação de Dados; Gestão do Processo de Segurança e Contingência; Função Administração de Segurança. Alguns tipos de pesquisa foram aplicados. Quanto aos meios, caracterizou-se como estudo de caso; para a elaboração das recomendações de revisão das normas e procedimentos de segurança, foram aplicadas pesquisas bibliográfica, documental e de campo. Quanto ao fim, pesquisa aplicada, motivada pela necessidade de resolver problemas concretos, com finalidade prática. Foram efetuadas visitas e entrevistas nas instalações da sede da FGV e no prédio da Bolsa de Valores do Rio de Janeiro - BVRJ. Dada a complexidade e abrangência da Segurança Empresarial, o estudo foi limitado a tratar de segurança física. Foi observada a necessidade da FGV rever as Normas e Procedimentos de Segurança Empresarial, buscando melhorar o nível de segurança geral e adotar instrumentos modernos de prevenção de ocorrência de sinistros que ponham em risco os valores da FGV, a saber: pessoas, instalações físicas, equipamentos, informações, suprimentos e facilidades de comunicação. Está sendo recomendada a adoção da metodologia Sistemática Integrada de Segurança e Contingência - SISC, para minimizarão dos impactos de situações emergências.

Um modelo exploratório para o processo de compra de MRO baseadas na internet Michelin Brasil

A presente dissertação tem por objetivo criar um modelo de compras de rMRO (manutenção, reparos e operações) baseado na Internet, para a Michelin no Brasil. Atualmente, a empresa Michelin está participando de uma comunidade virtual, sob a forma de um "vertal", criada pelas maiores empresas da indústria de pneu e borracha (Michelin, Goodyear, Pirelli, Continental, Cooper, Sumitomo, entre outras), e cuja intenção é desenvolver uma praça de mercado global para realização das suas compras e aprovisionamentos. A Rubbernetwork.com (RNC) foi fundada como uma empresa independente, reunindo o conjunto das compras da indústria de pneu e borracha, representando um valor de mais de cinqüenta bilhões de dólares por ano gastos em matérias-primas, equipamentos, maquinário, bens e serviços. Esta central de compras permitirá a seus membros aumentar a eficácia de suas operações e realizar economias substanciais nos custos de transação. Cada transação será protegida por apropriados sistemas advindos da implementação da tecnologia da informação, a fim de garantir a confidencialidade de todas as atividades comerciais de cada empresa individualmente. Os membros participantes estão convencidos de que a iniciativa possibilitará economias significativas e melhorará a eficiência de suas cadeias de valor. A comunidade virtual será aberta a todos os fabricantes e fornecedores relacionados à indústria de pneu e borracha, sendo também bem vindas oportunidades 2 de interação com outras comunidades virtuais, especialmente aquelas associadas à indústria automotiva. É dentro do contexto de implementação do projeto Rubbernetwork.com (RNC) que a dissertação se desenvolverá, tecendo estratégias e modelos de negócios concernentes aos processos de compras relacionados a MRO (manutenção, reparos e operações). O desenvolvimento de um "vertal" na Internet não impede que portais horizontais complementares, e não excludentes, sejam também acrescidos como alternativa de negócios. Há de se dar um tratamento específico às compras diárias que envolvem um grande número de diferentes fornecedores, várias áreas internas na empresa e consomem tempo desnecessário em trabalhos burocráticos, sem fins estratégicos. Cabe ressaltar que tal categoria de compras, denominada MRO, apesar de seu baixo valor por produto ou serviço adquirido, gera um elevado volume de transações e um alto impacto operacional. Pelo fato de tratar-se de uma experiência inovadora em setor de características próprias - mercado de pneu e borracha -, e de estar-se criando uma expectativa de cooperação entre empresas concorrentes, em busca da racionalização do processo de compras e divisão de custos operacionais, a metodologia utilizada, quanto aos seus fins, será exploratória e aplicada I. Quanto aos meios de investigação, a pesquisa realizada será: de campo, estudo de caso e bibliográfica. O universo da pesquisa restringir-se-á à empresa Michelin, onde o processo de compras de MRO baseado na Internet será contemplado, através de levantamento de dados nos E.UA e França, a fim de propor-se um modelo para a Michelin Brasil.

Acumulação de competências tecnológicas e os processos subjacentes de aprendizagem na indústria de bens de capital: O caso KVAERNER PULPING no Brasil

This dissertation is concerned with the implications of the learning processes for the technological capability accumulation at the firm level. This relationship was examined in Kvaerner Pulping over the period from 1980 to 2000. The firm is located in Curitiba/PR and supplies equipment and complete plants (capital goods) for pulp mills. In other words, based on an individual case study, this dissertation examines how the learning processes influence the building and accumulation of technological capability. The accumulation of technological capabilities is crucial for the survival and the competitive performance of the firms. An analytical framework already available in the literature was used to describe the paths (way and speed) of technological capability accumulation in the firm studied. However, the framework was adapted specifically for the capital goods industry for the pulp & paper sector. The paths of technological capability accumulation are analysed for three different technological functions: ¿engineering activities and project management¿, ¿operational processes and practices¿ and ¿process equipment¿. The learning mechanisms were examined in the light of four key features: variety, intensity, functioning and interaction. During the 1980s and 1990s the firm accumulated different levels of technological capability in the technological functions studied. It was only when the firm started to coordinate systematically the efforts to acquire and convert the knowledge from the individual to the organizational level, at the mid 1990s, that the accumulation of technological capability was accelerated. By the end of this decade the firm was able to accumulate innovative capabilities in all the functions analysed. Similarly to previous studies that investigated other types of firms, the conclusion of this dissertation suggests that the way and rate by which the firm accumulates technological capability can be explained by the learning process and its key features over time.