Two decades of tuberculosis in a city in Northeastern Brazil: advances and challenges in time and space

Abstract: INTRODUCTION This study presents two decades of epidemiological data on tuberculosis (TB), in order to understanding the disease profile and its spatiotemporal dynamics. METHODS This descriptive study was performed in the City of Olinda/Pernambuco, Brazil, from 1991-2010, and it analyzed new patients with TB living in the city. We used the χ²-test with a p-value <0.05 to identify differences in trends. Incidence and cluster distribution were identified using spatial scan statistics. RESULTS In total, 6202 new cases were recorded during the two decades. The highest incidence occurred in 1995 (110 cases/100,000 inhabitants), and the lowest occurred in 2009 (65 cases/100,000 inhabitants) (β=-1.44; R²=0.43; p=0.0018). The highest mortality occurred in 1998 (16 deaths/100,000 inhabitants), and the lowest occurred in 2008 (5 deaths/100,000 inhabitants) (β=-0.19; R²=0.17; p=0.07). There was a male predominance (65%), and ages ranged from 20-49 years (65%). There was a substantial increase in the number of patients that were cured after treatment (60% to 67%; p<0.001) as well as those tested for HIV (1.9% to 58.5%; p<0.001). During the first decade, clusters with p-values <0.05 included 29% of the total notified cases, and in the second decade, that percentage was 12%. CONCLUSIONS We observed a decreasing trend in incidence, which was significant, and mortality rates, which was not significant. The increased number of laboratory tests performed reflects advances in surveillance, and a reduction in the proportion of cases in primary clusters suggests, among other things, that the disease is spreading across the region.

Aortofemoral thromboendarterectomy

PURPOSE: To study whether endarterectomy is feasible in all patients with aortofemoral atherosclerotic obstruction, considering early and late results. METHODS: A clinical, prospective, and descriptive study carried out in a university hospital. Inclusion criteria were atherosclerotic aortofemoral obstructive disease, clinical status compatible with major surgery, and absence of prior restorative procedure. Exclusion criteria were aneurysm, inflammatory arterial disease, and prior restorative procedure found during surgery. Eighty patients entered the protocol, but 9 were excluded (11.2%). Seventy-one patients, mean age of 57.3 years, underwent endarterectomy. Operative indications were intermittent claudication and critical ischemia. A ring-stripper endarterectomy technique was employed in all patients. Results were related to age, gender, symptoms, presence of diabetes mellitus, extension of endarterectomy, and extent of obstructive disease. Chi square or Fisher exact tests were used when appropriate, and the Wilkoxon (Gehan) test was used to compare survival curves. RESULTS: Sixty-eight (100%) endarterectomies were patent at discharge. The mortality rate was 4.2%. The amputation rate (4.3%) was higher in diabetic patients and when there was associated femoropopliteal obstruction. The 5-year survival rate was 83.3%, and late deaths were mostly cardiovascular. Diabetes mellitus, age above 65 years, and associated femoropopliteal obstruction lowered the survival rate. The 5-year patency rate was 87.0%. Critical ischemia and less extensive endarterectomies were associated with a lower patency rate. There were no anastomotic aneurysms or deep infections. CONCLUSIONS: Aortofemoral thromboendarterectomy is feasible in 90% of patients, early mortality rate is low, diabetic patients and those with associated femoropopliteal obstructive disease have a higher mortality rate, amputation rate is low, late deaths are mostly cardiovascular, and late patency rate is high, and even higher in the intermittent claudication group.

Histopathologic and biochemical liver test abnormalities in chronic asymptomatic or oligosymptomatic alcoholics: a review

PURPOSE: To review the medical literature regarding the histopathologic and biochemical liver test abnormalities in chronic asymptomatic or oligosymptomatic alcoholics. METHODS: Review of articles in the MEDLINE and LILACS databases regarding serum levels and prevalence of alterations in aspartate-aminotransferase, alanine-aminotransferase, alkaline phosphatase, and total bilirubin, in relation to liver histopathology, with or without discrimination of types of histopathologic alteration. RESULTS: Global mean prevalence rates of aspartate-aminotransferase and alanine-aminotransferase alterations were 86.3% and 51.1%; in cases with steatosis they were 79.1% and 38.5%; and in cases of hepatitis, 90.1% and 58%. In all studies, prevalence rates of aspartate-aminotransferase alterations were significantly higher with lower variability than those of alanine-aminotransferase. Mean aspartate-aminotransferase levels were higher than 2N (N is the upper normal limit of the method employed) in all cases with hepatitis histopathology, while those of alanine-aminotransferase were 1.48N, in the same cases. Prevalence of alkaline phosphatase and total bilirubin abnormalities were 74.5% and 74.9% globally; in cases of steatosis, they were 70.9% and 67.9%; and in cases of hepatitis, 75.9% and 77.7%. Mean alkaline phosphatase levels were above the upper normal limit in all cases, but those of total bilirubin were above normal in 4 of 7 hepatitis studies. CONCLUSIONS: Prevalence of aspartate-aminotransferase alteration was consistently related to presence of histopathologic abnormalities; an enzyme level higher than 2N suggests the diagnosis of alcoholic hepatitis.

Sperm tail flexibility test: a simple test for selecting viable spermatozoa for intracytoplasmic sperm injection from semen samples without motile spermatozoa

PURPOSE: The objective was to describe the results of the injection of immotile spermatozoa with flexible tails when only immotile spermatozoa are present in the semen sample. METHODS: A retrospective study was conducted to analyze the procedure results for 10 couples who participated in our intracytoplasmic sperm injection program. The sperm tail was considered flexible when it moved up and down independently of the head movement, and it was considered inflexible when the movement occurred together (tail plus head). The fertilization and pregnancy rate were analyzed. RESULTS: The normal fertilization rate (presence of 2 pronuclei) was 30.3% (40/132), and the abnormal fertilization rate (presence of less than or more than 2 pronuclei) was 6.81% (9/132). A total of 52 embryos were obtained with 9 transfer procedures performed (pregnancy rate: 11.12%). CONCLUSIONS: The sperm tail flexibility test (STFT) is an easy and cost-effective way for selecting viable immotile spermatozoa and can be used as an alternative method for determining the viability of spermatozoa. This test seems to be a simple and risk-free method when compared to the swelling test.

Induction of experimental mammary carcinogenesis in rats with 7,12-dimethylbenz(a)anthracene

PURPOSE: To test an experimental model of chemical mammary carcinogenesis induction in rats. METHODS: Twenty young virgin Sprague-Dawley female rats, aged 47 days, received 20 mg of 7,12-dimethylbenz(a)anthracene (DMBA) intragastrically by gavage. Afterwards, at 8 and 13 weeks, their mammary glands were examined. At the end of the experiment, the animals were sacrificed, and the mammary tumors were measured and weighed. Tumor fragments were analyzed using light microscopy. RESULTS: Eight weeks after DMBA injection, 16 rats presented at least 1 breast tumor (80%). After 13 weeks, all of them (100%) developed breast carcinomas that were confirmed by histopathological analysis. CONCLUSION: This experimental animal model of chemical mammary induced carcinogenesis is feasible and can be used in further experiments on the role of tumorigenic biomodulator substances.

A practical approach to execute and test a lean startup

This paper practically applies the “Lean Startup Approach” by identifying, analyzing and executing a newly developed web-based business idea. Hypotheses were designed and tested with the construction of a minimum viable product – i.e. a landing page. In-depth interviews allowed deciding either to pivot or persevere the initial launch strategy. Overall, the aim was to collect as much valuable response as possible from customers and ultimately decide for a superior strategy while devoting the smallest amount of time and money.

Tensile properties of polymer repair materials - effect of test parameters

In this research, five types of polymer repair materials were selected for investigation of the influence of sample shape, deformation rate and test temperature on the mechanical properties determined with an uniaxial tensile test. The results showed the clear effect of measurement conditions on tensile strength, elongation and modulus of elasticity. The highest tensile strength and modulus of elasticity were exhibited by epoxy resin for the filling of concrete cracks, which achieved 1% elongation. The lowest coefficient of dispersion characterized the results of tensile test carried out using dumbbell samples at a deformation rate of 50 mm/min. The effect of temperature varied with the material type.

Assessment of overlay masonry strengthening system under in-plane monotonic and cyclic loading using the diagonal tensile test

The development of novel strengthening techniques to address the seismic vulnerability of masonry elements is gradually leading to simpler, faster and more effective strengthening strategies. In particular, the use of fabric reinforced cementitious matrix systems is considered of great potential, given the increase of ductility achieved with simple and economic strengthening procedures. To assess the effectiveness of these strengthening systems, and considering that the seismic action is involved, one important component of the structural behaviour is the in-plane cyclic response. In this work is discussed the applicability of the diagonal tensile test for the assessment of the cyclic response of strengthened masonry. The results obtained allowed to assess the contribution of the strengthening system to the increase of the load carrying capacity of masonry elements, as well as to evaluate the damage evolution and the stiffness degradation mechanisms developing under cyclic loading.

Bond of NSM FRP strengthened concrete: round robin test initiative

Despite the extensive research that has been conducted on the debonding behaviour of FRP strengthening systems, no standard methodology has been yet established on its experimental characterization. In this context, to assess the performance and reliability of small scale testing on NSM (near surface mounted) FRP strengthening systems, an experimental program was carried out on a series of nine NSM FRP strengthening systems, in the framework of an international Round Robin Testing (RRT). Eleven laboratories and seven manufacturers and suppliers participated in this extensive international exercise, which regarded both NSM and EBR FRP strengthening systems. Test results obtained for the NSM systems by the participating laboratories are discussed and compared in this paper to investigate the feasibility of the adopted single/double pulling shear test method, to investigate the mechanism of bond between NSM FRP reinforcement and concrete, and to investigate the level of variability obtained between the participating laboratories testing the same material batches. It is concluded that the tested variants in the adopted single/double shear pulling test have a significant influence, stressing the importance of the level of detail of standardized test protocols for bond verification. On overall, given the variants included in this study, the obtained variation in bond stress-slip behaviour between the laboratories remained fairly limited.

Qualitative risk assessment during polymer mortar test specimens preparation - methods comparison

Polymer binder modification with inorganic nanomaterials (NM) could be a potential and efficient solution to control matrix flammability of polymer concrete (PC) materials without sacrificing other important properties. Occupational exposures can occur all along the life cycle of a NM and “nanoproducts” from research through scale-up, product development, manufacturing, and end of life. The main objective of the present study is to analyse and compare different qualitative risk assessment methods during the production of polymer mortars (PM) with NM. The laboratory scale production process was divided in 3 main phases (pre-production, production and post-production), which allow testing the assessment methods in different situations. The risk assessment involved in the manufacturing process of PM was made by using the qualitative analyses based on: French Agency for Food, Environmental and Occupational Health & Safety method (ANSES); Control Banding Nanotool (CB Nanotool); Ecole Polytechnique Fédérale de Lausanne method (EPFL); Guidance working safely with nanomaterials and nanoproducts (GWSNN); Istituto Superiore per la Prevenzione e la Sicurezza del Lavoro, Italy method (ISPESL); Precautionary Matrix for Synthetic Nanomaterials (PMSN); and Stoffenmanager Nano. It was verified that the different methods applied also produce different final results. In phases 1 and 3 the risk assessment tends to be classified as medium-high risk, while for phase 2 the more common result is medium level. It is necessary to improve the use of qualitative methods by defining narrow criteria for the methods selection for each assessed situation, bearing in mind that the uncertainties are also a relevant factor when dealing with the risk related to nanotechnologies field.

Towards automated test and validation of SIP solutions

IP networks are currently the major communication infrastructure used by an increasing number of applications and heterogeneous services, including voice services. In this context, the Session Initiation Protocol (SIP) is a signaling protocol widely used for controlling multimedia communication sessions such as voice or video calls over IP networks, thus performing vital functions in an extensive set of public and enter- prise solutions. However, the SIP protocol dissemination also entails some challenges, such as the complexity associated with the testing/validation processes of IMS/SIP networks. As a consequence, manual IMS/SIP testing solutions are inherently costly and time consuming tasks, being crucial to develop automated approaches in this specific area. In this perspective, this article presents an experimental approach for automated testing/validation of SIP scenarios in IMS networks. For that purpose, an automation framework is proposed allowing to replicate the configuration of SIP equipment from the pro- duction network and submit such equipment to a battery of tests in the testing network. The proposed solution allows to drastically reduce the test and validation times when compared with traditional manual approaches, also allowing to enhance testing reliability and coverage. The automation framework comprises of some freely available tools which are conveniently integrated with other specific modules implemented within the context of this work. In order to illustrate the advantages of the proposed automated framework, a real case study taken from a PT Inovação customer is presented comparing the time required to perform a manual SIP testing approach with the one time required when using the proposed auto- mated framework. The presented results clearly corroborate the advantages of using the presented framework.

Screening of plants found in the State of Amazonas, Brazil for activity against Aedes aegypti larvae

Ethanol, methanol and water extracts representing mostly native plant species found in the Amazon region were prepared, respectively, by maceration, continuous liquid-solid extraction and infusion, followed by evaporation and freeze-drying. The freeze-dried extracts were tested for lethality toward Aedes aegypti larvae at test concentrations of 500 mg / mL. In general, methanol extracts exhibited the greatest larvicidal activity. The following 7 methanol extracts of (the parts of) the indicated plant species were the most active, resulting in 100% mortality in A. aegypti larvae: Tapura amazonica Poepp. (root), Piper aduncum L. (leaf and root), P. tuberculatum Jacq. (leaf, fruit and branch). and Simaba polyphylla (Cavalcante) W.W. Thomas (branch).

Inventário florestal a 100% em pequenas áreas sob manejo florestal madeireiro

O inventário é uma etapa básica do manejo florestal em que é avaliado a composição da floresta e a sua potencialidade para o manejo. O inventário a 100% tem o propósito de determinar o estoque de madeira existente para fins de planejamento da exploração. Este trabalho apresenta resultados de inventário florestal a 100% de um projeto de manejo florestal comunitário madeireiro conduzido pela Embrapa Acre em parceria com um grupo de produtores do Projeto de Colonização Pedro Peixoto, no estado Acre. A área total inventariada foi de 206,8 ha, composta por 57 talhões de tamanho médio de 3,6 ha cada um, correspondente a 48% da área total sob manejo de 12 pequenas propriedades. Foram abordadas todas as árvores com DAP ³ a 50,0 cm. Os resultados foram expressos, por espécie, por propriedade e para a área total em: número total de árvores (NT); abundância por hectare (AB); volume total (VT); volume por hectare (V); área basal total (ABsT); área basal por hectare (ABs); índice de importância da espécie (IND); e condição de aproveitamento da tora. Para a área total os resultados foram: NT = 3.518 árvores; AB = 17,01 árvores.ha-1; VT = 21.667,41 m³; V = 104,77 m³.ha-1; ABsT = 1.413,77 m²; e ABs = 6,84 m².ha-1. Foram reconhecidas em campo 204 espécies, pertencentes a 136 gêneros e a 43 famílias. Foi observado acentuada concentração dos dados dendrométricos em poucas espécies, pois somente cinco espécies respondem por um terço (33,6%) do IND total.

Prontidão escolar: validação de um instrumento Lollipop Test numa amostra portuguesa: crenças de progenitores e educadores de infância

Dissertação de mestrado integrado em Psicologia

LD5o of the bacteria Aeromonas hydrophila to matrinxã, Brycon amazonicus

In order to determine the lethal dose (96-h LD50) of the bacteria Aeromonas hydrophila to matrinxã, Brycon amazonicus, to be applied in challenge tests, 90 fish (63.23 ± 6.39 g) were divided into five treatments, with different bacterial solutions: T1 - Control (0.9% NaCl saline solution); T2 (4 x 10(11) cells/ mL); T3 (5 x 10(11) cells/ mL); T4 (1.36 x 10(12) cells/ mL) and T5 (3.06 x 10(12) cells/ mL). Fish were previously anesthetized with benzocaine (60 mg L-1), inoculated in the peritoneal cavity with the bacterial suspensions and then distributed into fifteen 80-L test chambers, where the water variables were monitored and fish mortality was observed. The experiment was randomly designed in three replicates and the 96-h LD50 was estimated according to the trimmed Spearman-Karber method. Water quality variables remained within adequate ranges for fish health and performance. Fish mortality rate increased with the bacterial concentrations of A. hydrophila (T1 = 0%; T2 = 16.66%; T3 = 44.44%; T4 = 72.22% and T5 = 100%), and the first mortalities were observed after 57 h, although the signs of the bacterial infection were already observed 24 h after the inoculation. The results indicate that the 96-h LD50 value of A. hydrophila to matrinxã is 6.66 x 10(11) cells/ mL.