Development and Application of Predictive Models for Survival, Growth, and Death of Enteric Pathogens in Leafy Greens Supply Chain

Leafy greens are essential part of a healthy diet. Because of their health benefits, production and consumption of leafy greens has increased considerably in the U.S. in the last few decades. However, leafy greens are also associated with a large number of foodborne disease outbreaks in the last few years. The overall goal of this dissertation was to use the current knowledge of predictive models and available data to understand the growth, survival, and death of enteric pathogens in leafy greens at pre- and post-harvest levels. Temperature plays a major role in the growth and death of bacteria in foods. A growth-death model was developed for Salmonella and Listeria monocytogenes in leafy greens for varying temperature conditions typically encountered during supply chain. The developed growth-death models were validated using experimental dynamic time-temperature profiles available in the literature. Furthermore, these growth-death models for Salmonella and Listeria monocytogenes and a similar model for E. coli O157:H7 were used to predict the growth of these pathogens in leafy greens during transportation without temperature control. Refrigeration of leafy greens meets the purposes of increasing their shelf-life and mitigating the bacterial growth, but at the same time, storage of foods at lower temperature increases the storage cost. Nonlinear programming was used to optimize the storage temperature of leafy greens during supply chain while minimizing the storage cost and maintaining the desired levels of sensory quality and microbial safety. Most of the outbreaks associated with consumption of leafy greens contaminated with E. coli O157:H7 have occurred during July-November in the U.S. A dynamic system model consisting of subsystems and inputs (soil, irrigation, cattle, wildlife, and rainfall) simulating a farm in a major leafy greens producing area in California was developed. The model was simulated incorporating the events of planting, irrigation, harvesting, ground preparation for the new crop, contamination of soil and plants, and survival of E. coli O157:H7. The predictions of this system model are in agreement with the seasonality of outbreaks. This dissertation utilized the growth, survival, and death models of enteric pathogens in leafy greens during production and supply chain.

Avaliação de alguns parâmetros da qualidade da anchoita (Engraulis anchoita) enlatada em óleo de girassol e em molho de tomate

O consumo de pescado no Brasil cresceu 40% nos últimos 7 anos passando de 6,46 para 9,03 kg/habitante/ano, valor que se aproxima do recomendado pela Organização Mundial de Saúde. A razão está relacionada com a subutilização de determinadas espécies e a falta de diversificação da indústria processadora para a produção de alimentos com maior valor agregado. Considerando o esgotamento de determinadas espécies com a utilização da sobrepesca, é possível o emprego da anchoita na forma de conservas através da utilização de meios de cobertura como molho de tomate e óleo comestível. Este trabalho teve como objetivo elaborar conservas de anchoita (Engraulis anchoita) com a utilização de 2 meios de cobertura: molho de tomate e óleo de girassol, submetidas a tempos de salmouragem diferenciados, 2 e 5 min e com o emprego ou não de pré-cozimento. De acordo com os padrões estabelecidos, as amostras de pescado fresco utilizadas para a execução dos enlatados apresentaram resultados físico químicos adequados comprovando o frescor do pescado envolvido no processo, ou sejam: 16,29 mg/100 g amostra para N-BVT, 7,90 mg/100 g amostra para N-TMA e pH 6,5. As conservas em molho de tomate submetidas a operação de salmouragem durante 2 min, com e sem pré-cozimento apresentaram, respectivamente, 16,57 e 16,24% proteínas, 3,94 e 4,66% lipídios, 73,0 e 73,28% umidade, 3,22 e 3,67% cinzas, 0,17 e 0,19% de cloretos (NaCl). As conservas com molho de tomate, utilizando anchoita eviscerada salmourada por 5 min, com e sem pré-cozimento, apresentaram respectivamente, 15,94 e 15,31% proteínas, 3,15 e 4,90 lipídios%, 73,70 e 73,98% umidade, 3,80 e 4,10% cinzas, 0,21 e 0,24% cloretos (NaCl). Para as conservas de anchoita em óleo de girassol, utilizando tempo de salmouragem de 2 min, com e sem pré-cozimento, apresentaram 16,97 e 16,76% proteínas, 7,68 e 5,70% lipídios, 65,87 e 68,74% umidade, 3,16 e 3,28% cinzas, 0,10 e 0,12% cloretos (NaCl), respectivamente. As conservas utilizando o pescado previamente submetido a salmouragem por 5 min e posteriormente enlatado com a adição de óleo de girassol, com e sem pré-cozimento apresentaram respectivamente, 15,97 e 15,89% proteínas, 7,91 e 5,19% lipídios, 66,26 e 68,23% umidade, 3,78 e 3,87% cinzas, 0,13 e 0,21% NaCl. As análises microbiológicas das conservas submetidas aos diferentes tratamentos mostraram ausência de Salmonella spp, Staphylococcus coagulase positiva e Clostridium sulfito-redutor, resultados estes, de acordo com o estabelecido pela legislação higiênico-sanitária brasileira. Nos testes de esterilidade comercial não foram constatadas alterações visíveis nos enlatados submetidos a incubação por 5 dias a 36 ± 1°C (determinação de micro-organismos aeróbios viáveis) e a 7-10 dias a 55 ± 1°C (termófilos). Considerando as quantidades de pescado enlatado (80, 90 e 100g), o rendimento para todas as amostras apresentaram, no mínimo, 50% de pescado em relação ao peso líquido. A avaliação sensorial realizada por teste de ordenação para a avaliação da preferência não apresentou diferenças significativas entre as amostras.

Avances y desafíos de la agenda de cambio climático en la Zona Costero-Marina de El Salvador

Central America is one of the most vulnerable regions to the adverse effects of climate change, due to the rise of frequency and intensity that hydrometeorological phenomena have occurred in recent years. In El Salvador 484 people died and 800,000 more were affected because these extreme events and economic losses reached up to 6.711 million dollars. According to the climate projections over the next 50 years in the territory, is expected that extreme events such as droughts and rainfall will intensify. Within the last 30 years, July of 2014 is considered the one with less rainfall. Meanwhile, Tropical Depression 12E in 2011 provoked an outstanding rainfall average of 1,137 mm, affecting more than 500,000 people; most of them live in the coastal zone. The death of 34 people and living economic losses of 840.4 million was recorded, equivalent to 4% of GDP. El Salvador has policies, national plans and strategies aimed to reducing vulnerability, promoting adaptation to these changes and more effective risk management. This paper compiles the impacts of climate variability in El Salvador and the efforts of the State on adaptation to improve environmental and social resilience.

A comparison of the physiological demands of rugby union match-play when determined by absolute (ABS) or individual (IND) velocity bands in Global Positioning System (GPS) analysis

Since turning professional in 1995 there have been considerable advances in the research on the demands of rugby union, largely using Global Positioning System (GPS) analysis over the last 10 years. A systematic review on the use of GPS, particularly the setting of absolute (ABS) and individual (IND) velocity bands in field based, intermittent, high-intensity (HI) team sports was undertaken. From 3669 records identified, 38 studies were included for qualitative analysis. Little agreement on the definition of movement intensities within team sports was found, only three papers, all on rugby union, had used IND bands, with only one comparing ABS and IND methods. Thus, the aim of this study was to determine if there is a difference in the demands within positions when comparing ABS and IND methods for GPS analysis and if these differences are significantly different between the forward and back positional groups. A total of 214 data files were recorded from 26 players in 17 matches of the 2015/2016 Scottish BT Premiership. ABS velocity zones 1-7 were set at 1) 0-6, 2) 6.1-11, 3) 11.1-15, 4) 15.1-18, 5) 18.1-21, 6) 21.1-15 and 7) 25.1-40km.h-1 while IND zones 1-7 were 1) <20, 2) 20-40, 3) 40-50, 4) 50-70, 5) 70-80, 6) 80-95 and 7) 95-100% of player’s individually determined maximum velocity (Vmax). A 40m sprint test measured Vmax using OptaPro S4 10 Hz (catapult, Australia) GPS units to derive IND bands. The same GPS units were worn during matches. GPS outputs analysed were % distance, % time, high intensity efforts (HIEs) over 18.1 km.h-1 / 70% max velocity and repeated high intensity efforts (RHIEs) which consists of three HIEs in 21secs. General linear model (GLM) analysis identified a significant difference in the measurement of % total distance covered, between the ABS and IND methods in all zones for forwards (p<0.05) and backs (p<0.05). This difference was also significant between forwards and backs in zones 1, shown as mean difference ± standard deviation (3.7±0.7%), 6 (1.2±0.4%) and 7 (1.0±0.0%) respectively (p<0.05). Percentage time estimations were significantly different between ABS and IND analysis within forwards in zones 1 (1.7±1.7%), 2 (-2.9±1.3%), 3 (1.9±0.8%), 4 (-1.4±0.8%) and 5 (0.2±0.4%), and within backs in zones 1 (-10±1.5%), 2 (-1.2±1.1%), 3 (1.8±0.9%) and 5 (0.6±0.5%) (p<0.05). The difference between groups was significant in zones 1, 2, 4 and 5 (p<0.05). The number of HIEs was significantly different between forwards and backs in zones 6 (6±2) and 7 (3±2). RHIEs were significantly different between ABS and IND for forwards (1±2, p<0.05) although not between groups. Until more research on the differences in ABS and IND methods is carried out, then neither can be deemed a criterion method. In conclusion, there are significant differences between the ABS and IND methods of GPS analysis of the physical demands of rugby union, which must be considered when used to inform training load and recovery to improve performance and reduce injuries.

A gestão da floresta e o planeamento do uso do solo

A temática desta dissertação é a gestão sustentável da actividade florestal. Tem como objectivo o desenvolvimento e aplicação de metodologias de planeamento e gestão do uso do solo. As preocupações com as intervenções na paisagem e com a incorporação das componentes que a constituem no planeamento e na gestão do território tem vindo a ter um maior desenvolvimento desde a década de 70. Por sua vez, as iniciativas políticas nacionais e internacionais na área do ambiente tiveram um maior impulso a partir dessa época, conduzindo a uma situação em que as preocupações com a sua conservação, gestão e qualificação assumem um papel fundamental. Um aumento da qualidade das paisagens implica um correcto planeamento do uso do solo e um subsequente esquema de incentivos à realidade sócioeconómica, potenciadores de um desenvolvimento sustentável. A gestão e o desenvolvimento sustentável pressupõem, por um lado, uma utilização parcimoniosa dos recursos, mas também uma articulação correcta dos usos às potencialidades do território, num quadro de planeamento e gestão do espaço que permita e promova o desenvolvimento de actividades económicas viáveis. Reconhecendo a forte influência que a acção antrópica tem exercido sobre a paisagem, privilegia-se a avaliação do factor evolução do uso do solo e a relação destas alterações com origem na actividade humana e com causas naturais de forma a determinar as causas específicas das alterações de uso. Nesta perspectiva efectua-se uma avaliação retrospectiva do impacto das diversas medidas de gestão com reflexo nas paisagens do Concelho de Arganil. A metodologia desenvolvida divide-se em cinco fases e tem como resultados os cenários de evolução do uso do solo e da demografia bem como a proposta de um modelo de ocupação sustentável. A escolha deste concelho como território de estudo para aplicação da investigação produzida prende-se com o facto de se considerar que ele é representativo de toda uma realidade da actividade florestal numa região vasta e de características razoavelmente idênticas, na qual existiram mudanças acentuadas de uso do solo e do meio sócio-económico nos últimos 50 anos, e de apresentar tendências evolutivas semelhantes às dos outros concelhos envolventes, o que permitirá aplicar a metodologia desenvolvida a outras áreas.

A relevância dos exercícios físicos para indivíduos de 30 a 50 anos de ambos os sexos portadores da Síndrome da Imunodeficiência Adquirida (HIV/AIDS) com Lipodistrofia causada pelo uso de anti-retrovirais

Introdução: Neste estudo será apresentado experimento sobre um programa de atividades físicas para diminuir os efeitos metabólicos da lipodistrofia, causada pela prescrição dos anti-retrovirais, medicamentos utilizados por portadores pelo vírus HIV\AIDIS. Objetivo: Investigar os benefícios dos exercícios físicos para indivíduos portadores do HIV\AIDS e combatendo doenças causadas pela lipodistrofia proveniente da terapia com anti-retrovirais. Metodologia: Foram 40 sujeitos divididos em grupo de exercício e grupo de controle. Os sujeitos participaram de palestra, exames e testes, tendo o grupo de exercício participado num programa de exército com duração de 24 semanas. As variáveis estudadas foram composição corporal, parâmetros bioquímicos e hemodinâmicos, e aptidão física e o questionário CEAT-VIH, versão em português do Brasil. Resultados: O programa de exercício apresentado foi positivo na composição corporal, parâmetros bioquímicos e hemodinâmicos e no questionário, CEAT-VIH, versão em português do Brasil. Na aptidão física o programa de exercício não obteve a resposta que esperávamos. Conclusão: O programa de exercício aplicado permitiu obter uma redução na massa corporal, IMC, glicose e colesterol, e melhoria ao nível da flexibilidade. Permitiu igualmente aumentar o cumprimento do seguimento da farmacologia prescrita pelos médicos; The Relevance of Physical Exercises for Individuals 30 to 50 years of Both Sexes Bearers of Acquired Immunodeficiency Syndrome (HIV \ AIDS) with Lipodystrophy Caused by the use of Anti-Retroviral. Summary: Introduction: In this study will be presented experiment on a physical activity program to decrease the metabolic effects of lipodystrophy, caused by the prescription of anti-retroviral drugs used by patients with HIV \ AIDIS. Objective: To investigate the benefits of exercise for people living with HIV subjects \ AIDS and combating diseases caused by lipodystrophy from therapy with antiretrovirals. Methods: 40 subjects were divided into exercise group and control group. The subjects participated in lecture, exams and tests, and the exercise group participated in an army program of 24 weeks duration. The variables studied were body composition, biochemical and hemodynamic parameters, and physical fitness and the CEAT-HIV questionnaire, version in Portuguese of Brazil. Results: The submitted exercise program was positive in body composition, biochemical and hemodynamic parameters and questionnaire, CEAT-HIV, version in Portuguese of Brazil. Physical fitness exercise program did not get the answer we expected. Conclusion: The applied exercise program yielded a reduction in body weight, body mass index, glucose and cholesterol, and improved level of flexibility. It has also increase compliance of following the prescribed pharmacology by doctors.

Precatórios da Justiça Federal no Orçamento da União de 2014 : diagnóstico sobre composição, distribuição, custo, origem e duração processual

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Economia, Administração e Contabilidade, Programa de Pós-Graduação em Administração, Mestrado Profissional em Administração, 2015.

Precatórios da Justiça Federal no Orçamento da União de 2014 : diagnóstico sobre composição, distribuição, custo, origem e duração processual

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Economia, Administração e Contabilidade, Programa de Pós-Graduação em Administração, Mestrado Profissional em Administração, 2015.

Biotechnological, nutritional and therapeutic uses of Pleurotus spp. (Oyster mushroom) related with its chemical composition: A review on the past decade findings

The particular characteristics of growth and development of mushrooms in nature result in the accumulation of a variety of secondary metabolites, several of them with biological activities. The genus Pleurotus is a cosmopolitan group of mushrooms with high nutritional value and therapeutic properties, besides a wide array of biotechnological and environmental applications. Scope and approach: The present report aims to provide a critical review on aspects related to chemical compounds isolated from the genus Pleurotus with possible biotechnological, nutritional and therapeutic uses. Investigations on the genus have immensely accelerated during the last ten years, so that only reports published after 2005 have been considered. Key findings and conclusions: The most important Pleurotus species cultivated in large scale are P. ostreatus and P. pulmonarius. However, more than 200 species have already been investigated to various degrees. Both basidiomata and mycelia of Pleurotus are a great renewable and easily accessible source of functional foods/nutraceuticals and pharmaceuticals with antioxidant, antimicrobial, anti-inflammatory, antitumor and immunomodulatory effects. A series of compounds have already been precisely defined including several polysaccharides, phenolics, terpenes and sterols. However, intensification of structure determination is highly desirable and demands considerable efforts. Further studies including clinical trials need to be carried out to ascertain the safety of these compounds as adequate alternatives to conventional drugs. Not less important is to extend the search for novel bioactives to less explored Pleurotus species.

Establishing a children’s orthopaedic hospital for Malawi: A review after 10 years

Background BEIT CURE International Hospital (BCIH) opened in 2002 providing orthopaedic surgical services to children in Malawi. This study reviews the hospital’s progress 10 years after establishment of operational services. In addition we assess the impact of the hospital’s Malawi national clubfoot programme (MNCP) and influence on orthopaedic training. Methods All operative paediatric procedures performed by BCIH services in the 10th operative year were included. Data on clubfoot clinic locations and number of patients treated were obtained from the MNCP. BCIH records were reviewed to identify the number of healthcare professionals who have received training at the BCIH. Results 609 new patients were operated on in the 10th year of hospital service. Patients were treated from all regions; however 60% came from Southern regions compared with the 48% in the 5th year. Clubfoot, burn contracture and angular lower limb deformities were the three most common pathologies treated surgically. In total BCIH managed 9,842 patients surgically over a 10-year period. BCIH helped to establish and co-ordinate the MNCP since 2007. At present the program has a total of 29 clinics, which have treated 5748 patients. Furthermore, BCIH has overseen the full or partial training of 5 orthopaedic surgeons and 82 orthopaedic clinical officers in Malawi. Conclusion The BCIH has improved the care of paediatric patients in a country that prior to its establishment had no dedicated paediatric orthopaedic service, treating almost 10,000 patients surgically and 6,000 patients in the MNCP. This service has remained consistent over a 10-year period despite times of global austerity. Whilst the type of training placement offered at BCIH has changed in the last 10 years, the priority placed on training has remained paramount. The strategic impact of long-term training commitments are now being realised, in particular by the addition of Orthopaedic surgeons serving the nation.

Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições

The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles

Adding Value to Manufacturing: Thirty Years of European Framework Program Activity

Part 1: Introduction

Marketing de cinema : a supply chain do sector cinematografico português

Mestrado em Marketing

Functionalized Carbon Micro/Nanostructures for Biomolecular Detection

Advancements in the micro-and nano-scale fabrication techniques have opened up new avenues for the development of portable, scalable and easier-to-use biosensors. Over the last few years, electrodes made of carbon have been widely used as sensing units in biosensors due to their attractive physiochemical properties. The aim of this research is to investigate different strategies to develop functionalized high surface carbon micro/nano-structures for electrochemical and biosensing devices. High aspect ratio three-dimensional carbon microarrays were fabricated via carbon microelectromechanical systems (C-MEMS) technique, which is based on pyrolyzing pre-patterned organic photoresist polymers. To further increase the surface area of the carbon microstructures, surface porosity was introduced by two strategies, i.e. (i) using F127 as porogen and (ii) oxygen reactive ion etch (RIE) treatment. Electrochemical characterization showed that porous carbon thin film electrodes prepared by using F127 as porogen had an effective surface area (Aeff 185%) compared to the conventional carbon electrode. To achieve enhanced electrochemical sensitivity for C-MEMS based functional devices, graphene was conformally coated onto high aspect ratio three-dimensional (3D) carbon micropillar arrays using electrostatic spray deposition (ESD) technique. The amperometric response of graphene/carbon micropillar electrode arrays exhibited higher electrochemical activity, improved charge transfer and a linear response towards H2O2 detection between 250μM to 5.5mM. Furthermore, carbon structures with dimensions from 50 nano-to micrometer level have been fabricated by pyrolyzing photo-nanoimprint lithography patterned organic resist polymer. Microstructure, elemental composition and resistivity characterization of the carbon nanostructures produced by this process were very similar to conventional photoresist derived carbon. Surface functionalization of the carbon nanostructures was performed using direct amination technique. Considering the need for requisite functional groups to covalently attach bioreceptors on the carbon surface for biomolecule detection, different oxidation techniques were compared to study the types of carbon–oxygen groups formed on the surface and their percentages with respect to different oxidation pretreatment times. Finally, a label-free detection strategy using signaling aptamer/protein binding complex for platelet-derived growth factor oncoprotein detection on functionalized three-dimensional carbon microarrays platform was demonstrated. The sensor showed near linear relationship between the relative fluorescence difference and protein concentration even in the sub-nanomolar range with an excellent detection limit of 5 pmol.

Risk premiumin the global creditMarkets: 2006-2012

¿What have we learnt from the 2006-2012 crisis, including events such as the subprime crisis, the bankruptcy of Lehman Brothers or the European sovereign debt crisis, among others? It is usually assumed that in firms that have a CDS quotation, this CDS is the key factor in establishing the credit premiumrisk for a new financial asset. Thus, the CDS is a key element for any investor in taking relative value opportunities across a firm’s capital structure. In the first chapter we study the most relevant aspects of the microstructure of the CDS market in terms of pricing, to have a clear idea of how this market works. We consider that such an analysis is a necessary point for establishing a solid base for the rest of the chapters in order to carry out the different empirical studies we perform. In its document “Basel III: A global regulatory framework for more resilient banks and banking systems”, Basel sets the requirement of a capital charge for credit valuation adjustment (CVA) risk in the trading book and its methodology for the computation for the capital requirement. This regulatory requirement has added extra pressure for in-depth knowledge of the CDS market and this motivates the analysis performed in this thesis. The problem arises in estimating of the credit risk premium for those counterparties without a directly quoted CDS in the market. How can we estimate the credit spread for an issuer without CDS? In addition to this, given the high volatility period in the credit market in the last few years and, in particular, after the default of Lehman Brothers on 15 September 2008, we observe the presence of big outliers in the distribution of credit spread in the different combinations of rating, industry and region. After an exhaustive analysis of the results from the different models studied, we have reached the following conclusions. It is clear that hierarchical regression models fit the data much better than those of non-hierarchical regression. Furthermore,we generally prefer the median model (50%-quantile regression) to the mean model (standard OLS regression) due to its robustness when assigning the price to a new credit asset without spread,minimizing the “inversion problem”. Finally, an additional fundamental reason to prefer the median model is the typical "right skewness" distribution of CDS spreads...