Cutting of Frozen Wood

The objective of this master's thesis was to develop a system for measuring the cutting forces of frozen wood. In northern parts of the world cuttingof frozen wood is one of the major problem. During winter and early spring the temperature inside the wood cells will fall below Zero degrees that strongly influences on the properties of the wood. These variations of properties will effects on the blade nomenclature while cutting the frozen wood. However the end results will cause uneven cutting forces. Cutting forces, Chip formation, wearing of the blade and the quality of the machined surface are difficult task. In this project we are attempting to find the variation of cutting forces and properties of frozen wood at four different temperatures (-20 , -10, 0 and + 10 degrees). The linear planning machine was used for measuring the cuttingforces. The cutting was done parallel to the long axis of wood due to the nature of pine wood and the structure of the plane. A considerable amount of work andtime was used for collecting and processing the numerical information from the sensors of the measuring system. There were some alterations suggested to the construction of the plane and the sensor system.

Development of Order-Delivery Process in Purchasing

Diplomityön tavoitteena oli kehittää Fazer Suklaan oston tilaus-toimitusprosesseja, jotta raaka-aineet ja pakkausmateriaalit pystytään hoitamaan mahdollisimman tehokkaasti. Ensin selvitettiin kirjallisuuden avulla tilaus-toimitusprosessin päävaiheet ja niihin vaikuttavat tekijät. Empiirisessä osassa lähdettiin liikkeelle käymällä läpi Fazer Suklaan oston nykytilanne, joka tehtiin ostajille suunnatun aikaselvityksen, haastatteluiden ja nykyisten tilaus-toimitusprosessien kuvaamisen avulla. Tavoitetilanteen rakentaminen aloitettiin ostettavien materiaalien ja toimittajien luokittelemisella. Tämän perusteella nämä materiaalit voitiin jakaa kolmen eri tilaus toimitusprosessin alle. Automaattisessa tilaus-toimitusprosessissa eri vaiheet automatisoidaan yhdessäavain toimittajien kanssa. Puoliautomaattinen prosessi perustuu systeemiin, jossa toimittaja näkee internetin kautta Fazerin tuotantosuunnitelman ja tekee tämän perusteella materiaalien täydennykset. Yksinkertaisessa prosessissa ostoarvoltaan alhaiset materiaalit hoidetaan mahdollisimman lähellä käyttöpistettä ja prosessin vaiheet tehdään mandollisimman pienellä työmäärällä. Tavoiteprosessien implementoinnilla todettiin suurimmiksi eduiksi prosessivaiheiden vähentyminen ja manuaalisen työn automatisoituminen. Tätä kautta saatiin prosessin eri vaiheiden työmäärää vähennettyä, sekä alennettua varastotasoja ja näin tilaus toimitusprosessin kokonaiskustannuksia pystyttiin pienentämään.

Functions of the human papillomavirus type 16 E4 protein

1. Abstract Cervical cancer is thought to be the consequence of infection by human papillomaviruses (HPV). In the majority of cases, DNA from HPV type 16 (HPV16) is found in malignant cervical lesions. The initial steps leading to transformation of an infected cell are not clearly understood but in most cases, disruption and integration of the episomal viral DNA must take place. As a consequence, the E2 and E4 genes are usually not expressed whereas the E6 and E7 oncogenes are highly expressed. However, in a normal infection in which the viral DNA is maintained as an episome, all viral genes are expressed. The pattern according to which the viral proteins are made, and therefore the life cycle of the virus, is tightly linked to the differentiation process of the host keratinocyte. The study of the viral oncogenes E6 and E7 has revealed crucial functions in the process of malignant transformation such as degradation of the p53 tumor suppressor protein, deregulation of the Retinoblastoma protein pathway and activation of the telomerase ribonucleoprotein. All these steps are necessary for cancerous lesions to develop. However, the loss of the E2 gene product seems to be necessary for sufficient expression of E6 and E7 in order to achieve such effects. In normal infections, the E4 protein is made abundantly in the later stages of the viral life cycle. Though extensive amounts of work have been carried out to define the function of E4, it still remains unclear. In this study, several approaches have been used to try and determine the functions of E4. First, a cell-penetrating fusion protein was designed and produced in order to circumvent the chronic difficulties of expressing E4 in mammalian cells. Unfortunately, this approach was not successful due to precipitation of the purified fusion protein. Second, the observation that E4 accumulates in cells having modified their adhesion properties led to the hypothesis that E4 might be involved in the differentiation process of keratinocytes. Preliminary results suggest that E4 triggers differentiation. Last, as E4 has been reported to collapse the cytokeratin network of keratinocytes, a direct approach using atomic force microscopy has allowed us to test the potential modification of mechanical properties of cells harboring reorganized cytokeratin networks. If so, a potential role for E4 in viral particle release could be hypothesized. 2. Résumé Il a été établi que le cancer du col de l'utérus se développe essentiellement à la suite d'une infection par le virus du papillome humain (HPV). Dans la majorité des cas analysés, de l'ADN du HPV de type 16 (HPV16) est détecté. Les étapes initiales de la transformation d'une cellule infectée sont mal connues mais il semble qu'une rupture du génome viral, normalement épisomal, suivi d'une intégration dans le génome de la cellule hôte soient des étapes nécessaires dans la plupart des cas. Or il semble qu'il y ait une sélection pour les cas où l'expression des oncogènes viraux E6 et E7 soit favorisée alors que l'expression des gènes E2 et E4 est en général impossible. Par contre, dans une infection dite normale où le génome viral n'est pas rompu, il n'y pas développement de cancer et tous les gènes viraux sont exprimés. L'ordre dans lequel les protéines virales sont produites, et donc le cycle de réplication du virus, est intimement lié au processus de différentiation de la cellule hôte. L'étude des protéines oncogènes E6 et E7 a révélé des fonctions clés dans le processus de transformation des cellules infectées telles que la dégradation du suppresseur de tumeur p53, la dérégulation de la voie de signalisation Rb ainsi que l'activation de la télomérase. Toutes ces activités sont nécessaires au développement de lésions cancéreuses. Toutefois, il semble que l'expression du gène E2 doit être empêchée afin que suffisamment des protéines E6 et E7 soient produites. Lorsque le gène E2 est exprimé, et donc lorsque le génome viral n'est pas rompu, les protéines E6 et E7 n'entraînent pas de telles conséquences. Le gène E4, qui se trouve dans la séquence codante de E2, a aussi besoin d'un génome viral intact pour être exprimé. Dans une infection normale, le gène E4 est exprimé abondamment dans les dernières étapes de la réplication du virus. Bien que de nombreuses études aient été menées afin de déterminer la fonction virale à E4, aucun résultat n'apparaît évident. Dans ce travail, plusieurs approches ont été utilisées afin d'adresser cette question. Premièrement, une protéine de fusion TAT-E4 a été produite et purifiée. Cette protéine, pouvant entrer dans les cellules vivantes par diffusion au travers de la membrane plasmique, aurait permis d'éviter ainsi les problèmes chroniques rencontrés lors de l'expression de E4 dans les cellules mammifères. Malheureusement, cette stratégie n'a pas pu être utilisée à cause de la précipitation de la protéine purifiée. Ensuite, l'observation que E4 s'accumule dans les cellules ayant modifié leurs propriétés d'adhésion a suggéré que E4 pourrait être impliqué dans le procédé de différentiation des kératinocytes. Des résultats préliminaires supportent cette possibilité. Enfin, il a été montré que E4 pouvait induire une réorganisation du réseau des cytokératines. Une approche directe utilisant le microscope à force atomique nous a ainsi permis de tester une potentielle modification des propriétés mécaniques de cellules ayant modifié leur réseau de cytokératines en présence de E4. Si tel est le cas, un rôle dans la libération de particules virales peut être proposé pour E4.

Applying the principles of life cycle assessment and costing in process modeling to examine profit-making capability

Static process simulation has traditionally been used to model complex processes for various purposes. However, the use of static processsimulators for the preparation of holistic examinations aiming at improving profit-making capability requires a lot of work because the production of results requires the assessment of the applicability of detailed data which may be irrelevant to the objective. The relevant data for the total assessment gets buried byirrelevant data. Furthermore, the models do not include an examination of the maintenance or risk management, and economic examination is often an extra property added to them which can be performed with a spreadsheet program. A process model applicable to holistic economic examinations has been developed in this work. The model is based on the life cycle profit philosophy developed by Hagberg and Henriksson in 1996. The construction of the model has utilized life cycle assessment and life cycle costing methodologies with a view to developing, above all, a model which would be applicable to the economic examinations of complete wholes and which would require the need for information focusing on aspects essential to the objectives. Life cycle assessment and costing differ from each other in terms of the modeling principles, but the features of bothmethodologies can be used in the development of economic process modeling. Methods applicable to the modeling of complex processes can be examined from the viewpoint of life cycle methodologies, because they involve the collection and management of large corpuses of information and the production of information for the needs of decision-makers as well. The results of the study shows that on the basis of the principles of life cycle modeling, a process model can be created which may be used to produce holistic efficiency examinations on the profit-making capability of the production line, with fewer resources thanwith traditional methods. The calculations of the model are based to the maximum extent on the information system of the factory, which means that the accuracyof the results can be improved by developing information systems so that they can provide the best information for this kind of examinations.

Origins of production errors and significance of employee empowerment in reducing production error amount in sheet metal fabricating industry

The market place of the twenty-first century will demand that manufacturing assumes a crucial role in a new competitive field. Two potential resources in the area of manufacturing are advanced manufacturing technology (AMT) and empowered employees. Surveys in Finland have shown the need to invest in the new AMT in the Finnish sheet metal industry in the 1990's. In this run the focus has been on hard technology and less attention is paid to the utilization of human resources. In manymanufacturing companies an appreciable portion of the profit within reach is wasted due to poor quality of planning and workmanship. The production flow production error distribution of the sheet metal part based constructions is inspectedin this thesis. The objective of the thesis is to analyze the origins of production errors in the production flow of sheet metal based constructions. Also the employee empowerment is investigated in theory and the meaning of the employee empowerment in reducing the overall production error amount is discussed in this thesis. This study is most relevant to the sheet metal part fabricating industrywhich produces sheet metal part based constructions for electronics and telecommunication industry. This study concentrates on the manufacturing function of a company and is based on a field study carried out in five Finnish case factories. In each studied case factory the most delicate work phases for production errors were detected. It can be assumed that most of the production errors are caused in manually operated work phases and in mass production work phases. However, no common theme in collected production error data for production error distribution in the production flow can be found. Most important finding was still that most of the production errors in each case factory studied belong to the 'human activity based errors-category'. This result indicates that most of the problemsin the production flow are related to employees or work organization. Development activities must therefore be focused to the development of employee skills orto the development of work organization. Employee empowerment gives the right tools and methods to achieve this.

Warlike outlines of the securitarian state. Life control and the exclusion of people

Present book collects some of the thoughts developed during the 5 years (2004-2009) of work in the frame of the CHALLENGE project, "The Changing Landscape of European Liberty and Security". The project has related academic knowledge and research with the analysis of the policies and practices of the member States of the European Union [EU] around the couple liberty and security

An alternative approach to the prevention of doping in cycling

The article proposes an alternative approach to policies for preventing doping in cycling, based on in-depth analysis of the functioning of nine of the 40 world professional teams and the careers of the 2,351 riders who were or have been professionals since 2005. The first part shows that the instruments of prevention have been based on a questionable understanding of doping as an individual moral fault, and have not produced the expected results. The second part proposes to analyse the ways in which teams and riders produce their achievments, so as to put forward an alternative to the anti-doping policies used hitherto, which have little impact on riders. The study shows that it is more pertinent to examine the forms of employment and the business models, because these have important effects on cycling professionals' conditions of work. It makes it possible to identify three dimensions of the risk of doping on which organisations can act in their antidoping policies: team organisation, riders' preparation and workload, and the precarity of employment.

The Key Features of Knowledge and Knowledge Management in Product Development Process

Tutkimusongelmana oli kuinka tiedon johtamisella voidaan edesauttaa tuotekehitysprosessia. Mitkä ovat ne avaintekijät tietoympäristössä kuin myös itse tiedossa, joilla on merkitystä erityisesti tuotekehitysprosessin arvon muodostumiseen ja prosessien kehittämiseen? Tutkimus on laadullinen Case-tutkimus. Tutkimusongelmat on ensin selvitetty kirjallisuuden avulla, jonka jälkeen teoreettinen viitekehys on rakennettu tutkimaan rajattua ongelma-aluetta case-yrityksestä. Empiirisen tutkimuksen materiaali koostuu pääasiallisesti henkilökohtaisten teemahaastattelujen aineistosta. Tulokset merkittävimmistä tiedon hyväksikäytön haittatekijöistä, kuten myös parannusehdotukset on lajiteltu teoreettisessa viitekehyksessä esitettyjen oletustekijöiden mukaan. Haastatteluissa saadut vastaukset tukevat kirjallisuudesta ja alan ammattilaiselta saatua käsitystä tärkeimmistä vaikuttavista tekijöistä. Tärkeimmät toimenpiteet ja aloitteet joilla parannettaisiin tiedon muodostumista, koskivat ennnen kaikkea työnteon ulkoisia olosuhteita, eikä niinkään tiedon muodostumisen prosessia itseään. Merkittävimpiä haittatekijöitä olivat kultturiin, fyysiseen ja henkiseen tilaan ja henkilöstöresursseihin liittyvät ongelmat. Ratkaisuja ongelmiin odotettiin saatavan lähinnä tietotekniikan, henkilöstöresurssien ja itse tiedon muokkaamisen avulla. Tuotekehitysprosessin ydin tietovirtojen ja –pääomien luokittelu ja tulkitseminen tiedon muodostusta kuvaavan Learning Spiralin avulla antoi lähinnä teoreettisia viitteitä siitä millaisia keinoja on olemassa tiedon lisäämiseen ja jakamiseen eri tietotyypeittäin. Tulosten perusteella caseyrityksessä pitäisi kiinnittää erityistä huomiota tiedon dokumentointiin ja jakamiseen erityisesti sen tiedon osalta, joka on organisaatiossa vain harvalla ja/tai luonteeltaan hyvin tacitia.

Diverse Routes from School, via Higher Education, to Employment. A Comparison of Nine European Countries

The central theme for this study is graduate employment and employability in European-wide discussion. In this study, the complex relationships between higher education and the world of work are explored from the vantage point of how individuals make use of the higher education system in their transition from education to employment. The variation among individual transition processes in nine European countries is analysed with the help of a comparable graduate survey. Countries in this study are Italy, Spain, France, Austria, Germany, the Netherlands, the United Kingdom, Finland, and Norway. The data used for the study is commonly known as the “CHEERS” or “Careers after Higher Education, A European Research Survey.” The data was collected in 1999. The study discusses the possibilities and limitations the higher education system has in supporting the initial education-to-work transitions of youth. The study also addresses problems with comparing national higher education systems in terms of enrolment and graduate employability. A central purpose for this study is to reflect on concerns about the prolongation of individual transitions with a framework that simultaneously considers both the graduate employability and the duration of the education-to-work transition process. The key concept for this study is the standard student/graduate; synonym concepts are the traditional and the conventional student/graduate. Standard graduates are relatively young individuals who are performing their initial transition from education to working-life and who complete the degree-earning process within the stipulated time frame. In all nine countries, standard graduates make up a considerable share of the student flow, passing from higher education to the labour markets. The share of standard graduates is by far the largest in France, where they comprise the overwhelming mass. The proportion of the standard graduates is the lowest in Italy, Finland, and Austria where approximately one in four graduates completed the process of higher education within the stipulated time frame. Of the nine countries compared, employability of the whole graduate population is the greatest in Norway, the UK, Finland, and the Netherlands. Compared with employability of the whole graduate population, variation among the countries is considerably reduced when reviewing the employability of only the standard graduates. Thereby, even though the ranking among countries remains largely unchanged, the variations among them are smaller when the duration of degree earning process is standardized. The study also discusses other ideal types of student careers (or transition processes) besides the standard student/graduate. Results of regression analyses indicate that that at the pan-European level analysis, the graduate labour markets are not heavily segmented in terms of the type of the individual transition process. When considering within-country differences between the graduates, the field of studies is clearly a more powerful explanatory variable than the type of the transition process. There are, nevertheless, clear indications that, irrespective of the country, chances of finding a high status job are, on the average, highest amongst those who graduate within the stipulated duration of the degree program and who thereby have experienced the standard student career, whereas, participating in working life while studying protects against unemployment after finishing one’s degree.

Why Women Rarely Rise to the Top: A Social Identity Model of Leader Prototypes.

Purpose We propose a social identity model of leader prototypes to address why the maleness of leader prototypes is more pronounced among men than among women (e.g., Schein, 2001). Specifically, we argue that individuals project their ingroup prototype (e.g., a male prototype) onto a valued other category (e.g., leaders) (e.g., Wenzel, Mummendey, Weber, & Waldzus, 2003) in order to maintain a positive ingroup (e.g., gender) identity. We hypothesized that both women and men engage in ingroup projection of their gender prototype on their leader prototype, and we expected this effect to be stronger for men than women. We also investigated intelligence as a moderator of ingroup projection. Methodology Participants (276 students, University of Lausanne) assessed to what extent attributes on a list of gender traits were characteristic of a successful leader. We computed relative ingroup similarity scores (e.g., Waldzus & Mummendey, 2004) representing the difference between how characteristic ingroup traits are for a successful leader, and how characteristic outgroup traits are for a successful leader. Results Results showed that men engaged in ingroup projection while women engaged in outgroup projection, and that men engaged in ingroup projection to a greater extent. We also found a small, but positive effect of intelligence on ingroup projection among men. Limitations The use of a student sample might limit the external validity of our findings. Implications Our findings contribute to research on the under-representation of women in managerial roles, and introduce intelligence as a predictor of ingroup projection. Value Our study allows for a more fine-grained understanding of the cognitive representations of leaders of men and women.

Individual differences in gene expression : insights from transcriptional control of the CSL gene and from human population studies

CSL is a key transcription factor, mostly acting as a repressor, which has been shown to have a highly context-dependent function. While known as the main effector of Notch signaling, it can also exert Notch-independent functions. The downstream effects of the Notch/CSL signaling pathway and its involvement in several biological processes have been intensively studied. We recently showed that CSL is important to maintain skin homeostasis, as its specific deletion in mouse dermal fibroblasts -or downmodulation in human stromal fibroblasts- creates an inducing environment for squamous cell carcinoma (SCC) development, possibly due to the conversion of stromal fibroblasts into cancer associated fibroblasts (CAFs). Despite the wide interest in CSL as a transcriptional regulator, the mechanism of its own regulation has so far been neglected. We show here that CSL expression levels differ between individuals, and correlate among others with genes involved in DNA damage response. Starting from this finding we show that in dermal fibroblasts CSL is under transcriptional control of stress inducers such as UVA irradiation and Reactive Oxygen Species (ROS) induction, and that a main player in CSL transcriptional regulation is the transcription factor p53. In a separate line of work, we focused on individual variability, studying the differences in gene expression between human populations in various cancer types, particularly focusing on the Caucasian and African populations. It is indeed widely known that these populations have different incidences and mortalities for various cancers, and response to cancer treatment may also vary between them. We show here several genes that are differentially expressed and could be of interest in the study of population differences in cancer. -- CSL est un facteur de transcription agissant essentiellement comme répresseur, et qui a une fonction hautement dépendant du contexte. C'est l'effecteur principal de la voie de signalisation de Notch, mais il peut également exercer ses fonctions dans une façon Notch- indépendante. Nous avons récemment montré que CSL est important pour maintenir l'homéostasie de la peau. Sa suppression spécifique dans les fibroblastes dermiques de la souris ou dans les fibroblastes stromales humaines crée un environnement favorable pour le développement du carcinome épidermoïde (SCC), probablement en raison de la conversion des fibroblastes en fibroblastes associé au cancer (CAF). Malgré le grand intérêt de CSL comme régulateur transcriptionnel, le mécanisme de sa propre régulation a été jusqu'ici négligée. Nous montrons ici que dans les fibroblastes dermiques CSL est sous le contrôle transcriptionnel de facteurs de stress tels que l'irradiation UVA et l'induction des ROS dont p53 est l'acteur principal de cette régulation. Nous montrons aussi que les niveaux d'expression de CSL varient selon les individus, en corrélation avec d'autres gènes impliqués dans la réponse aux dommages de l'ADN. Dans une autre axe de recherche, concernant la variabilité individuelle, nous avons étudié les différences dans l'expression des gènes dans différents types de cancer entre les populations humaines, en se concentrant particulièrement sur les populations africaines et caucasiennes. Il est en effet bien connu que ces populations montrent des variations dans l'incidence des cancers, la mortalité, ainsi que pour les réponses au traitement. Nous montrons ici plusieurs gènes qui sont exprimés différemment et pourraient être digne d'intérêt dans l'étude du cancer au sein de différentes populations.

Current and future trens in the quality control of pharmaceuticals and biopharmaticals : impacts on Cost of Goods Sold (COGS)

[Summary] 2. Roles of quality control in the pharmaceutical and biopharmaceutical industries. - 2.1. Pharmaceutical industry. - 2.2. Biopharmaceutical industry. - 2.3. Policy and regulatory. - 2.3.1. The US Food and Drug Administration (FDA). - 2.3.2. The European Medicine Agency (EMEA). - 2.3.3. The Japanese Ministry of Work, Labor and Welfare (MHLW). - 2.3.4. The Swiss Agency for Therapeutic Products (Swissmedic). - 2.3.5. The International Conference on Harmonization (ICH). - - 3. Types of testing. - 3.1. Microbiological purity tests. - 3.2. Physiochemical tests. - 3.3. Critical to quality steps. - 3.3.1. API starting materials and excipients. - 3.3.2. Intermediates. - 3.3.3. APIs (drug substances) and final drug product. - 3.3.4. Primary and secondary packaging materials fro drug products. - - 4. Manufacturing cost and quality control. - 4.1.1. Pharmaceutical manufacturing cost breakdown. - 4.1.2. Biopharmaceutical manufacturing cost breakdown. - 4.2. Batch failure / rejection / rework / recalls. - - 5. Future trends in the quality control of pharmaceuticals and biopharmaceuticals. - 5.1. Rapid and real time testing. - 5.1.1. Physio-chemicals testing. - 5.1.2. Rapid microbiology methods

Is Transnational Private Regulation Potentially an Effective Means of Promoting Collective Industrial Relations?

This paper asks whether collective industrial relations can be promoted by means other than seeking change in public policy. Recent research points to the increasing significance of transnational private regulation (TPR) in developing economies. There is an emerging consensus that market incentives to improve wages and conditions of work can have a modest positive effect on measurable outcomes like hours of work, and health and safety. However, it appears that TPR has little impact on the capacity of workers to pursue such improvements for themselves via collective action. The paper takes a closer look at the potential of TPR to enhance worker voice and participation. It argues that this potential cannot be properly evaluated without understanding how local actors mobilise the social and political resources that TPR provides. The case studies presented show how different TPR schemes have been used by unions in Africa as a means to pursue the interests of members. The authors found that the scale of the impact of TPR in all of the contexts studied depended almost entirely on the existing capacities and resources of the unions involved. TPR led to the creation of collective industrial relations processes, or helped unions to ensure that certain enterprises participated in existing industrial relations processes, but did virtually nothing to enhance the political and organisational capacity of the unions to influence the outcomes of those processes in terms of wages and conditions of employment. The paper concludes that the potential of TPR to promote the emergence of collective industrial relations systems is very low.

Study of linkage between miniature and singed genes in Drosophila melanogaster

We have developed a practical exercise for undergraduate students whose main aim is to identify, using genetic crosses, a pair of D. melanogaster mutations (miniature and singed). Each student receives a vial with the problem strain containing two unknown mutations. The first step is to observe and describe both mutations. Then, the students carry out genetic crosses between mutant and normal strains: (P) ♀ mutant strain × ♂ normal strain (P) ♀ normal strain × ♂ mutant strain A different offspring is expected in these crosses: in the first one we will obtain normal females and m sn males, whereas in the second all individuals will present normal phenotype. It is possible to deduce that both are sex linked mutations. With this information and to simplify the amount of work, only F1 individuals from the first cross will be used (m+sn+ / m sn × m sn / Y chrom.) to obtain the F2 generation. By counting the number of miniature (recombinant type), singed (recombinant type), miniature-singed (parental type) and normal (parental type) flies it is possible to estimate the recombination frequency between both genes. Knowing the phenotype, their chromosomal location (X chromosome) and the genetic distance between both mutations, it is possible to identify them by finding all this information in a Drosophila melanogaster genetic map. Additionally, a statistical analysis can be carried out to compare the number of expected F2 individuals with those observed in the experiment. As the distance between both genes is 15.1 m.u., then the expected percentages for each phenotype would be: normal (42.45%), miniature-signed (42.45%), miniature (7.55%) and singed (7.55%). Multiplying the frequency of each class by the total number of individuals obtained in the F2 it is possible to estimate the expected number of flies for each class. Finally, a χ2 test can be computed to ascertain whether there are significant differences between expected and observed number of individuals.

Quality in work and aggregate productivity

We explore the relationship between quality in work and aggregate productivity in regions and sectors. Using recent Spanish aggregate data for the period 2001-2006, we find that quality in work may be an important factor to explain productivity levels in sectors and regions. We use two alternatives definitions of quality in work: one from survey data and the other from a social indicators approach. We also use two different measurements of labour productivity to test the robustness of our results. The estimates are run using a simultaneous equation model for our panel of data, and find important differences between high tech and low tech sectors: a positive relationship between quality in work and productivity in the former case, and a negative relationship in the latter. Consequently, on the one hand we see that quality in work is not only an objective per se, but may also be a production factor able to increase the wealth of regions; on the other hand, at the aggregate level, we may also find that high productivity levels coincide with lower quality in work conditions.