Influence of the rapid thermal annealing on the properties of thin a-Si films

The variation of the structure, morphology and the electrical properties of thin amorphous silicon films caused by Rapid Thermal Annealing is studied. The films annealed at 1200degreesC for 2 minutes change their structure to polycrystalline and as a result their resistivity decreases by 4 orders of magnitude. Due to the small thickness of the as deposited amorphous silicon the obtained poly-Si is strongly irregular and has many discontinuities in its texture.

Bubble Dynamics and Heat Transfer in Microgravity Pool Boiling

Boiling is an extremely complicated and illusive process. Microgravity experiments offer a unique opportunity to study the complex interactions without external forces, such as buoyancy, which can affect the bubble dynamics and the related heat transfer. Furthermore, they can also provide a means to study the actual influence of gravity on the boiling. Two research projects on pool boiling in microgravity have been conducted aboard the Chinese recoverable satellites. Ground-based experiments both in normal gravity and in short-term microgravity in the Drop Tower Beijing and numerical simulations have also been performed. Steady boiling of R113 on thin platinum wires was studied with a temperature-controlled heating method, while quasi-steady boiling of FC-72 on a plane plate was investigated with an exponentially increasing heating voltage. It was found that the bubble dynamics in microgravity has a distinct difference from that in normal gravity, and that the heat transfer characteristic is depended upon the bubble dynamics. Lateral motions of bubbles on the heaters were observed before their departure in microgravity. The surface oscillation of the merged bubbles due to lateral coalescence between adjacent bubbles drove it to detach from the heaters. Slight enhancement of heat transfer on wires is observed in microgravity, while diminution is evident for high heat flux in the plate case.

低极性化合物的电喷雾质谱检测方法及几种中藏药材的活性成分研究

本学位论文首先报道了为解决低极性化合物的电喷雾质谱（ESI-MS）分析难题而建立的一种衍生化分析方法；然后从色谱-质谱联用分析、分离纯化和结构鉴定等方面分别报道了几种中藏药材的活性成分研究。论文由下述六章组成： 第一章报道了盐酸羟胺衍生化方法在电喷雾质谱 (ESI-MS) 分析中的应用。该方法利用盐酸羟胺和羰基成肟的快速反应，建立了针对三萜酮等含酮或醛羰基低极性化合物的ESI-MS 信号增强技术。此方法不仅可应用于增强羰基化合物的ESI-MS 质谱信号，还可检测化合物中羰基的个数以及辨别涉及羰基官能团的同分异构体。此外，通过简单的氧化反应，还可将该方法拓展到三萜醇、甾醇等含羟基的低极性化合物，增强它们的ESI-MS 信号。对比已报道的相关ESI-MS 增强质谱信号的衍生化方法，此方法有经济、实用、快速和简便的显著特点。 第二章是关于野生羌活及其栽培品种化学成分的色谱-质谱联用分析。对不同产地野生羌活生长过程中活性成分的动态变化、野生羌活不同形态部位和人工栽培羌活中的活性成分含量进行了HPLC 定量分析。结果表明主要活性成分羌活醇和异欧前胡素都随生长期存在规律性变化，羌活不同形态部位中的活性成分含量也有明显不同。这些实验结果有些较好地印证了传统中医的用药理论，有些也对羌活的传统使用方法提出了新的建议。 第三章介绍了几种传统中藏药材的色谱-质谱联用及串联质谱分析。通过GC-MS 方法，从藏药材长花党参挥发油中共分离鉴定出45 个化合物；利用HPLC方法测定了该藏药材中的主要化学成分——木犀草素的含量（0.7%）；利用串联质谱技术，对西番莲和射干中的主要成分进行了快速鉴定，从西番莲中鉴定了4个黄酮碳苷；从不同产地的射干和川射干中鉴定了8 个主要异黄酮成分，其中包括一个未见报道的化合物。 第四章的内容为藏药材石莲叶点地梅的活性成分研究。从植物石莲叶点地梅(Androsace integra (Maxim.) Hand.-Mazz.) 乙醇提取物的正丁醇萃取部分共分离和鉴定了6 个化合物，利用MS 和NMR 等现代波谱学技术阐明了它们的结构：其中包括4 个三萜类化合物：分别是androsacin (1)、 ardisiacrispin A (2) 、saxifragifolin A (3) 和20(29)-lupen-3-one (4)；一个神经酰胺：4-羟基-Δ8,9(Z)-鞘氨醇-2'-羟基正二十四碳酸酰胺(5)；一个甾体类化合物：胡萝卜苷(6)。化合物1为新的13,28-epoxy-oleanane 型三萜皂苷，在其结构表征的过程中，采用LC-MS 进行糖分析，获得了值得推广的好结果。通过活性筛选发现化合物1~3 对HepG2肝癌细胞表现出不同程度的抑制活性，其中化合物2 活性最好，其IG50 为1.65μg/mL。 第五章是关于一些传统中藏药材的农药活性筛选。利用Syngenta 公司的活性筛选平台对68 种传统中藏药材醇提物进行了抗菌和除草的生物源农药活性筛选。结果表明所筛选的68 种植物提取物中，共有14 种样品表现出明显的除草/杀虫活性，其中水母雪莲花、松萝和茯神木等植物提取物还具有多种生物活性。活性成分还有待进一步追踪分离、纯化和结构鉴定。 第六章为文献综述，概述了羌活药材的研究进展。对羌活属及药用羌活植物从分类学、本草学、品质评价、人工栽培、化学成分及药理作用等方面进行了文献归纳和总结。 In this dissertation, an electrospray ionization mass spectrometry (ESI-MS) signal enhancement method, as well as the work of bioactive components study, HPLC-MS/MS application, bioassay screening, chromatograph separation and structure identification of the metabolites in several medicinal herbs have been reported. First chapter expounded a rapid, simple ESI-MS sensitivity enhancement method for detecting carbonyl groups in natural products has been developed by using hydroxylamine hydrochloride (NH2OH·HCl) as a derivatization reagent. We use the oxime formed during the derivatization reactions and its Beckmann rearrangement intermediates as a means of detecting the carbonyl groups originally present in these triterpenoids. In comparison with other derivatization methods in the literature, this method is simple, specific and can be used to detect carbonyl groups in triterpenoids which have low polarity and are poorly or non-ionizable. Moreover, it can also be used to detect hydroxyl groups by using the Dess-Martin periodinane (DMP) to convert primary and secondary hydroxyls into carbonyl groups. Chapter 2 reported an HPLC-MS method for analyzing the main bioactive compounds in both wild and cultured Notopterygium incisum. The results indicated that the main bioactive compounds varied through different seasons regularly, and in different commercial parts of this herb the content of these compounds also differed from each other. The quantitative analysis results showed that in the traditional commercial parts, the content of main chemical constitutes in Silkworm Notopterygium, Bamboo Notopterygium and Irregular-nodal Notopterygium are higher than that in Striped Notopterygium. This result is tally with the traditionally concept that the quality of Notopterygium, Bamboo Notopterygium and Irregular-nodal Notopterygium are better than that of Striped Notopterygium, which means that the quality of rhizomes is better than main roots. The chemical constituents of cultured N. incisum is reported for the first time in this dissertation and the analysis results showed some growth curves of chemical constituents in this plant, but still left some questions unanswered. Chapter 3 discussed the GC/LC-MS analysis of the traditional Chinese medicines Codonopsis thalictrifolis, Passiflora incarnate, Belamcanda chinensis and Passiflora incarnate. The main constituent, luteolin was isolated and identified from the traditional Tibet medicine of C. thalictrifolis. The quantitative analysis by HPLC has revealed that the content of luteolin in this herb is 0.7%. GC-MS was employed to analyzed chemical constituents of the essential oil from the flower of C. thalictrifolis. More than 60 peaks were detected and 45 of them were identified by comparing their spectra with that of the standards in the database and literatures. ESI-MS/MS was used to analyze the n-butanol extract of Passiflora incarnate. Based on the information of pseudo molecular ions and fragment ions of the glycosides, four major flavone-C-glycosides have been detected and identified as 7-methoxyluteolin-6-C-β-D-glucopyranoside, vitexin, swertisin and orientin. The isoflavone compounds in theextracts of three samples of B. chinensis collected in Gansu, Sichuan and Hunan, and the extract of Iris tectorum collected in Sichuan were analyzed by using TOF-HRMS and IT-MS. From the extracts of these herbs, a new isoflavone, identified as 5’,5,6,7-tetrahydroxy-3’4’-dimethoxyl isoflavon, and 7 known ones have been identified by analyzing the fragmentation patterns and their molecular formulas given by HRMS and the tandem mass spectrometry acquired by IT-MS. Chapter 4 elucidated the isolation and identification of a new triterpene saponin, androsacin (1), along with five known compounds (2-6) were isolated from the whole plants of Androsace integra (Maxim.) Hand.-Mazz., an herb used in traditional Chinese and Tibetan medicine. The chemical structure of the new compound was established as 3β-O-{β-D-glucopyranosyl-(1→4)-O-β-D-xylopyranosyl-(1→2)-O-β-D-glucopyranosyl-(1→4)-[O-β-D-glucopyranosyl-(1→2)]-α-L-arabinopyranosyl}-16α-hydroxy-13β,28-epoxy-olean-30-al by analyzing its MS, 1D- and 2D-NMR spectra. Compound 2 was cytotoxic toward HepG2 cancer cell with the GI50 value of 1.65 μg/mL. Chapter 5 described the biogenic pesticide activity screening of 68 traditional Chinese and Tibetan medicine extractions. The intention of this study is to explore bioactive natural compounds from these traditional medicinal herbs for biogenic insecticides use. Based on Syngenta’s bioassay, 14 extractions of these traditional medicines showed pesticide activities, and some of them had multi-activities on antibacterial and insecticidal. Chapter 6 is a review on the chemical and bioactivity research progress of Notopterygium incisum and N. forbesii.

同源四倍体水稻三系亲本的遗传差异、细胞遗传学比较研究及低直链淀粉含量突变体Wx基因序列分析

同源四倍体水稻（2N=4X=48,AAAA）是由二倍体水稻（2N=2X=24,AA）通过秋水仙素诱导染色体加倍后得到的新品系，具有优良的抗病性以及较高的蛋白质含量。因此，在四倍体水平上挖掘水稻的增产潜力成为水稻育种的新手段。同源四倍体水稻具有很强的遗传可塑性和很弱的遗传保守性，利用其作为水稻远缘杂交的桥梁，从野生物种中不断地引进有益的基因，这将有助于杂交水稻的多代利用和固定水稻的杂种优势。但是迄今为止，还没有关于同源四倍体水稻遗传多样性，遗传背景的报道。目前世界关于同源四倍体水稻的研究主要集中在中国，主要研究方向为培育、筛选结实正常的亲本材料，配置和筛选结实率正常或接近正常的组合。经过几十年研究，虽然在材料构建，细胞学研究等方面取得了较大进展，但同样由于结实率低的瓶颈问题未解决，而使多倍体水稻育种未能取得实质性进展。而近年来一些关于同源四倍体水稻低结实率机理的细胞学研究也由于缺乏统计学数据而缺乏说明性。本文用SSR标记，对选取的36个结实率正常同源四倍体水稻三系亲本和14个来源二倍体亲本，分析他们的遗传差异和群体遗传结构。本文还利用我们培育的高、低结实率的同源四倍体水稻恢复系、优良保持系和杂种F1及二倍体对照为材料，进行系统深入的细胞遗传学研究，进一步探讨同源四倍体水稻有性传递后代的发育过程，探索分裂期染色体行为特征与遗传性状稳定性的关系，为进一步选育多倍体水稻品种并将其应用于生产提供理论依据。同源四倍体水稻突变株D4063-1直链淀粉含量比来源二倍体明恢63下降一半,即其直链淀粉含量为5.23%，为研究其直链淀粉含量下降的原因，本文还根据普通水稻Wx基因设计引物，扩增测序获得了D4063-1Wx基因的全序列，与已报道Wx基因进行比对分析，并根据D4063-1和籼稻、粳稻的序列差异并根据D4063-1在该片段上的特征序列位点设计了用于识别D4063-1的寡核苷酸片段,为快速、准确的鉴别低直链淀粉的D4063-1创造了条件。 SSR标记具有基因组分布广泛、数量丰富、多态性高、容易检测、共显性、结果稳定可靠、实验重现性好、操作简单、经济、易于高通量分析等许多优点，被认为是用于遗传多样性、品种鉴定、物种的系统发育、亲缘关系及起源等研究的非常有效的分子标记。本研究选取了中国科学院成都生物所培育的同源四倍体和二倍体水稻亲本，并用36个微卫星标记进行了遗传差异和种群遗传结构分析。在50个品系中，我们观察到较高水平的多态性，每基因等位基因数（Ae）分布于2至6之间（平均值3.028），多态性信息含量（PIC）分布于0.04至0.76之间（平均值0.366）；期望杂合度（He）分布于0.04至0.76之间（平均值0.370），Shannon指数（I）分布于0.098至1.613之间（平均值0.649）。同源四倍体品系的等位基因数，期望杂合性和Shannon指数都比二倍体品系高。在供试50个品系中，较多材料均发现Rare基因，根据SSR多态性指数我们构建了同源四倍体和二倍体水稻的核心指纹库。F-统计值表明遗传差异主要存在于同源四倍体品系中（Fst=0.066）。聚类分析结果表明50个品系可以分为4个组。I组包括所有的同源四倍体和二倍体籼稻保持系，以及一个同源四倍体籼稻雄性不育系及其来源二倍体。II组仅包括IR来源的品系。III组比II组和IV组更复杂，包括同源四倍体和二倍体籼稻恢复系品系。IV组包括同源四倍体和二倍体粳稻品系。此外,由于等位基因及配子的遗传差异,同源四倍体与二倍体品系中存在单位点和双位点的遗传差异。分析结果表明,二倍体和四倍体水稻基因库的不同,其中遗传变异可以区分四倍体与二倍体水稻。同源四倍体水稻具有长期而独立的遗传性，我们能够选育并得到与二倍体亲本相比有特殊优良农艺性状的品系。 本研究以高结实率的同源四倍体水稻恢复系DTP-4、D明恢63及优良保持系D46B为材料进行农艺性状及细胞遗传学比较研究。DTP-4、D明恢63及保持系D46B的的染色体组成均为2N=4X=48，花粉母细胞具有较为理想的减数分裂行为，配对染色体的比率在99%以上，这与理论染色体组构成相符。DTP-4和D明恢63PMC减数分裂各个时期单价体和三价体的比例都非常低，而在MI， PMC观察到较多的二价体和四价体且四价体多以环状形式出现，其最大频率的染色体构型分别为12II 6IV和10II 7IV。恢复系DTP-4和D明恢63在MI四价体频率分别为2.00/PMC和2.26/PMC，而保持系D46B在MI四价体频率为6.00/PMC，极显著地高于恢复系品系，表明保持系D46B具有更好的染色体配对性质；AI保持系D46B的染色体滞后频率为10.62%，远低于恢复系材料DTP－4和D明恢63的19.44％和23.14％，接近二倍体对照明恢63的7.30%水平；TI保持系D46B具有比恢复系更低频率的微核数。而在TII，D46B的正常四分小孢子比率不但高于恢复系品系甚至高于二倍体对照。对高低结实率的同源四倍体水稻恢复系和杂种F1代的花粉育性，结实率和细胞遗传学行为进行了比较研究。DTP-4, D明恢63, D46A´DTP-4和D46A´D明恢63的花粉育性和结实率比D什香和D46A´D什香显著提高。减数分裂分析的结果表明，DTP-4，D明恢63，D什香，D46A´DTP-4，D46A´D明恢63和D46A´D什香其减数分裂染色体构型分别为：0.05I +19.96 II (9.89棒状+10.07环状) +0.01III + 2.20 IV, 0.11I +19.17 II (8.90 棒状+10.37 环状) +0.09III + 2.26 IV + 0.01 VI, 1.33I +9.46 II (4.50 棒状+4.96 环状) +0.44III + 6.02 IV + 0.09VI + 0.09 VIII, 0.02I +14.36 II (6.44 棒状+7.91 环状) +0.01III + 4.80IV + 0.01VIII, 0.06 I +17.67 II (11.01 棒状+6.67 环状) +0.06 III + 3.10 IV + 0.01 VI and 1.11 I +11.31 II (5.80 棒状+5.51 环状) +0.41 III + 5.63 IV+0.03VI+0.03VIII。在同源四倍体水稻恢复系和杂种F1代材料中，最常见的染色体构型为16II +4IV和12II +6IV。在减数分裂过程中，结实率较高的材料染色体异常现象较少而结实率较低的材料染色体异常现象较严重。在杂种F1代中，二价体的比例要低于其相应的恢复系亲本，同样的，单价体，三价体和多价体的比例相比其恢复系亲本也偏低。然而，在减数分裂MI，杂种F1代中四价体的比例要显著高于其恢复系亲本。在中期I，每细胞单价体的比例和花粉育性呈现出极高的负相关(-0.996)，当单价体数目升高时，花粉育性下降。其次是每细胞三价体的比例(-0.987)，之后则是每细胞多价体的比例与花粉育性的负相关(-0.948)。但是统计分析表明，二价体和四价体的比例对花粉育性和结实率没有显著影响。这一结果表明出了花粉育性和细胞减数分裂行为的相关性，同源四倍体的减数分裂行为为筛选高结实率的同源四倍体种系提供了理论依据。 突变体是遗传学研究的基本材料。利用突变体克隆水稻基因,并进而研究基因的生物学功能是水稻功能基因组学的重要研究内容。本课题组在多年的四倍体水稻育种研究中已获得多个低直链淀粉含量突变体，其中一些突变体在直链淀粉含量下降的同时，胚乳外观也发生了显著改变，呈半透明或不透明。同源四倍体水稻突变株D4063-1直链淀粉含量比来源二倍体明恢63下降一半,即其直链淀粉含量为5.23%。为研究其直链淀粉含量下降的原因，我们根据普通水稻Wx基因设计引物，扩增测序获得了D4063-1Wx基因的全序列，与已报道Wx基因进行比对分析；同源四倍体水稻D4063-1Wx基因最显著变化为在外显子序列中发生了碱基缺失，导致移码突变，在第9外显子终止密码子提前出现。D4063-1Wx基因碱基位点的变化还导致了其序列上的酶切位点的变化,对常用限制性内切酶位点分析分析结果表明同源四倍体水稻相对于籼稻和粳稻多了2个sph1酶切位点，相对于粳稻减少了6个Acc1，增加了4个Xba1，1个Xho1，1个Pst1和1个Sal1酶切位点。聚类分析表明D4063-1Wx基因序列与籼稻亲源关系较近，由此推测D4063-1Wx基因来源于籼稻的Wxa基因型。另外，根据D4063-1Wx基因的碱基差异，我们推测D4063-1Wx基因外显子碱基变化导致的RNA加工障碍是其直链淀粉降低的主要原因，并可能与其米饭较软等品质相关。本文还根据D4063-1和籼稻、粳稻的序列差异并根据D4063-1在该片段上的特征序列位点设计了用于识别D4063-1的寡核苷酸片段,并作为PCR反应的引物命名为AUT4063-1,将该引物与我们设计的扩增普通籼稻、粳稻的Wx基因引物F5配合使用建立了识别D4063-1的显性和共显性两种检测方式的分子标记,为快速、准确的鉴别低直链淀粉的D4063-1创造了条件。 研究同源四倍体水稻基因组的遗传差异，探索同源四倍体水稻的遗传规律，研究分裂期染色体行为特征与遗传性状稳定性的关系,旨在揭示四倍体水稻中同源染色体配对能力的遗传差异，为进一步选育多倍体水稻品种并将其应用于生产提供理论依据。 Autotetraploid rice (2N=4X=48, AAAA) is a new germplasm developed from diploid rice (2N=2X=24, AA) through chromosomes doubling with colchicines and is an excellent resource for desirable resistance genes to the pathogens and high protein content. Therefore, heterosis utilization on polyploidy is becoming a new strategy in rice breeding. At present, the main research on autotetraploid rice centralizes in China. Breeding effort has been made to improve autotetraploid rice genetically, however, the progresses are limited due to higher degree of divergence between hybrid sterility and polygenic nature. But to date, almost nothing is reported about the genetic diversity, original and genetic background of autotetraploid rice. Despite several reports on cytological analysis of the mechanisms of low seed set in autotetraploid rice still the results are inconclusive due to lack the statistical evaluation. Therefore, the study on the mechanisms of low seed set in autotetraploid is a priority for rice breeding. Microsatellites or simple sequence repeats (SSRs) are the widely used marker for estimating genetic diversity in many species, including wild, weedy, and cultivated rice. In our research, genetic diversity and population genetic structure of autotetraploid and diploid populations collected from Chengdu Institute of Biology, Chinese Academy of Sciences were studied based on 36 microsatellite loci. For the total of 50 varieties, a moderate to high level of genetic diversity was observed at population levels with the number of alleles per locus (Ae) ranging from 2 to 6 (mean 3.028) and PIC ranging from 0.04 to 0.76 (mean 0.366). The expected heterozygosity (He) varied from 0.04 to 0.76 with the mean of 0.370 and Shannon’s index (I) ranging from 0.098 to 1.613 (mean 0.649). The autotetraploid populations showed a slightly higher level of effective alleles, the expected heterozygosity and Shannon’s index than that of diploid populations. Rare alleles were observed at most of the SSR loci in one or more of the 50 accessions and core fingerprint database of the autotetraploid and diploid rice was constructed. The F-statistics showed that genetic variability mainly existed among autotetraploid populations rather than among diploid populations (Fst=0.066). Cluster analysis of the 50 accessions showed four major groups. Group I contained all of the autotetraploid and diploid indica maintainer lines and a autotetraploid and its original diploid indica male sterile lines. Groups II contained only original of IR accessions. Group III was more diverse than either group II or IV and comprised of both autotetraploid and diploid indica restoring lines. Group IV included japonica cluster of the autotetraploid and diploid rices. Furthermore, genetic differences at the single-locus and two-locus levels, as well as components due to allelic and gametic differentiation, were revealed between autotetraploid and diploid varieties. This analysis indicated that the gene pools of diploid and autotetraploid rice are somewhat dissimilar, which made a variation that distinguishes autotetraploid from diploid rices. Using this variation, we can breed new autotetraploid varieties with some new important agricultural characters but the diploid rice has not. Cytogenetic characteristics in restorer lines DTP-4, DMinghui63 and maintainer line D46B of autotetraploid rices were studied. DTP-4, DMinghui63 and D46B showed the advantage of high seed set and biological yield. The meiotic chromosome behavior was slightly irregular in DTP-4, DMinghui63 and D46B. We observed less univalent, trivalent and multivalent at MI, but more bivalent and quadrivalent were observed. The most frequent chromosome configurations were 12II 6IVand 10II 7IV in restorer and maintainer lines, respectively. The quadrivalent frequency of DTP-4 and Dminghui63 at metaphase(MI) was respectively 2.00/PMC and 2.26/PMC. However that frequency of D46B was 6.00/PMC, which was greatly significantly higher than DTP-4 and Dminghui63. That indicates the maintainer D46B has better chromosome pairing capability in metaphase (MI). The frequency of lagging chromosomes of the maintainer D46B at anaphaseI (AI) was 10.62%, which was significantly lower than that of DTP-4(19.44%) and Dminghui63(23.14%) and nearly reaching the level of diploid CK(7.30%). In telophaseI (TI) maintainer D46B showed lower frequency of microkernel at TI and lower frequency of abnormal spores at telophaseII(TII). We also studied pollen fertility, seed set and cytogenetic characteristics of restorer lines and F1 hybrids of autotetraploid rice. DTP-4, DMinghui63, D46A´DTP-4 and D46A´DMinghui63 showed significantly higher pollen fertility and seed set than DShixiang and D46A´DShixiang. Pairing configurations in PMC of DTP-4, DMinghui63, DShixiang, D46A´DTP-4, D46A´DMinghui63 and D46A´DShixiang were 0.05 I+19.96 II (9.89 rod+10.07 ring)+0.01 III+2.20 IV, 0.11 I+19.17 II (8.90 rod+10.37 ring)+0.09 III+2.26 IV+0.01 VI, 1.33 I+9.46 II (4.50 rod+4.96 ring)+0.44 III+6.02 IV+0.09 VI+0.09 VIII, 0.02 I+14.36 II (6.44 rod+7.91 ring)+0.01 III+4.80 IV+0.01V III, 0.06 I+17.67 II (11.01 rod+6.67 ring)+0.06 III+3.10 IV+0.01 VI and 1.11 I+11.31 II (5.80 rod+5.51 ring)+0.41 III+5.63 IV+0.03 VI+0.03 VIII, respectively. Configuration 16 II+4 IV and 12 II+6 IV occurred in the highest frequency among the autotetraploid restorers and hybrids. Meiotic chromosome behaviors were less abnormal in the tetraploids with high seed set than those with low seed set. The hybrids had fewer frequencies of bivalents, univalents, trivalents and multivalents than the restorers, but higher frequency of quatrivalents than the restorers at MI. The frequency of univalents at M1 had the most impact on pollen fertility and seed set, i.e., pollen fertility decreased with the increase of univalents. The secondary impact factors were trivalents and multivalents, and bivalents and quatrivalents had no effect on pollen fertility and seed set. The correlative relationship between pollen fertility and cytogenetic behaviors could be utilized to improve seed set in autotetraploidy breeding. The amylose content of autotetraploid indica mutant Rice D4063-1 dropped by half than diploid Minghui 63, that is, its amylose content of 5.23%.The whole sequence of Waxy gene of D4063-1 is amplified and sequenced. And the discrepancy of bases is found comparing to the reported Waxy gene. The Waxy gene of autotetraploid Rice D4063-1 had a base deletion in exon sequence, which resulted frameshift mutation in exon 9 and termination codon occur early. The mutation of Wx also led to the change of some common restriction endonuclease sites. Results showed compared to indica and japonica, D4063-1 had two adding sph1 sites. Compared to japonica, D4063-1 had six decreasing Acc1, a adding Xho1, Pst1 and Sal1 restriction sites. Phylogeny analysis shows that the DNA sequence of Waxy gene of D4063-1 is closer to Indica, and we suppose that the Waxy gene of D4063-1 is origin from genotype Wxa. In addition, according to the base differences of Wx in D4063-1, we deduce that RNA processing obstacle led by base change of intron is the main cause to low the amylose content, and related to phenotype of its soft rice. Based on analysis of fragments of D4063-1, indica and japonica and according to the special point of the three species, primers as markers-AUT4063-I were designed for distinguishing the D4063-1 from other rice. Combining with primer pair F5, dominant and codominant ways were established for discriminating them., rapid and correct identification of D4063-1 from other rice could be done. The genetic analysis is important to ensure the original of autotetraploid rice, for maintaining the “distinctiveness” of autotetraploid varieties, and to differentiate between the various genetic background of autotetraploid rice. The autotetraploid breeding will benefit from detailed analysis of genetic diversity in the germplasm collections. Further investigation on mechanisms of meiotic stability should benefit polyploid breeding. These findings demonstrated opportunity to improve meiotic abnormalities as well as grain fertilities in autotetraploid rice.

Isoscalar Giant Monopole Resonance in Relativistic Continuum Random Phase Approximation

The isoscalar giant monopole resonance (ISGMR) in nuclei is studied in the framework of a fully consistent relativistic continuum random phase approximation (RCRPA). In this method the contribution of the continuum spectrum to nuclear excitations is treated exactly by the single particle Green's function technique. The negative energy states in the Dirac sea are also included in the single particle Green's function in the no-sea approximation. The single particle Green's function is calculated numerically by a proper product of the regular and irregular solutions of the Dirac equation. The strength distributions in the RCRPA calculations, the inverse energy-weighted sum rule m(-1) and the centroid energy of the ISGMR in Sn-120 and Pb-208 are analysed. Numerical results of the RCRPA are checked with the constrained relativistic mean field model and relativistic random phase approximation with a discretized spectrum in the continuum. Good agreement between them is achieved.

Photoionization of 1s electron and corresponding shake-up process in ground and excited lithium atoms

The cross sections of the 18 electron photoionization and corresponding shake-up processes for Li atoms in the ground state 1s(2)2s and excited states 1s(2)2p, 1s(2)3p, 1s(2)3p and 1s(2)3d are calculated using the multi-configuration Dirac-Fock method. The latest experimental photoelectron spectrum at hv = 100 eV [Cubaynes D et al. Phys. Rev. Lett. 99 (2007) 213004] has been reproduced by the present theoretical investigation excellently. The relative intensity of the shake-up satellites shows that the effects of correlation and relaxation become more important for the higher excited states of the lithium atom, which are explained very well by the spatial overlap of the initial and final state wavefunctions. In addition, strong dependence of the cross section on the atomic orbitals of the valence electrons are found, especially near the threshold.

Relativistic Continuum Random Phase Approximation and Applications I. Formalism

A fully consistent relativistic continuum random phase approximation (RCRPA) is constructed in terms of the Green's function technique. In this method the contribution of the continuum spectrum to nuclear excitations is treated exactly by the single particle Green's function, which includes also the negative states in the Dirac sea in the nose aapproximation. The theoretical formalism of RCRPA and numerical details are presented. The single particle Green's function is calculated numerically by a proper product of regular and irregular solutions of the Dirac equation. The numerical details and the formalism of RCRPA in the momentum representation are presented.

Band properties of the transitional nucleus Pt-189

High-spin states in Pt-189 have been studied with the in-beam gamma-spectroscopy method via the Yb-176(O-18, 5n) reaction at beam energies of 88 MeV and 95 MeV. A new level scheme of Pt-189 has been established. Rotational bands based on the upsilon i(13/2)(-1), upsilon f(5/2)(p(3/2)) and upsilon i(13/2)(-2)upsilon f(p(3/2)) configurations, as well as several structures with irregular level spacings, have been observed. Properties of rotational bands have been analyzed in the framework of triaxial particle-rotor model. A gamma similar to -30 degrees triaxial shape and a near prolate shape have been proposed to the upsilon i(13/2)(-1) and uf(5/2)(p(3/2)) bands, respectively. Two Delta I=2 transition sequences with similar energies have been observed, and they have been proposed to be associated with the upsilon i(13/2)(-1)upsilon f(5/2)(p(3/2)) configuration. According to the relevant Nilsson orbitals, the bands built on the upsilon i(13/2)(-1)upsilon f(5/2)(p(3/2)) configuration could be interpreted as a pair of pseudo-spin partner.

卫星表面光学反射特性建模与仿真研究

在研究空间相机成像效果探测问题时,针对提高探测相机成像真实效果的需要,研究了卫星表面光学反射特性的建模与仿真方法。利用双向反射分布函数(BRDF)仿真卫星表面的光学反射特性,将卫星表面物理特性与其光学反射特性有机地结合起来。在VC.Net环境下开发卫星表面光学反射特性仿真软件,并将软件集成到空间探测相机成像效果仿真平台上。利用平台进行成像仿真实验,生成真实感仿真图片。仿真结果表明,BRDF能够精确仿真卫星表面的光学反射特性,使成像效果仿真更加准确和逼真。

A discrete square global grid system based on the parallels plane projection

We developed a direct partitioning method to construct a seamless discrete global grid system (DGGS) with any resolution based on a two-dimensional projected plane and the earth ellipsoid. This DGGS is composed of congruent square grids over the projected plane and irregular ellipsoidal quadrilaterals on the ellipsoidal surface. A new equal area projection named the parallels plane (PP) projection derived from the expansion of the central meridian and parallels has been employed to perform the transformation between the planar squares and the corresponding ellipsoidal grids. The horizontal sides of the grids are parts of the parallel circles and the vertical sides are complex ellipsoidal curves, which can be obtained by the inverse expression of the PP projection. The partition strategies, transformation equations, geometric characteristics and distortions for this DGGS have been discussed. Our analysis proves that the DGGS is area-preserving while length distortions only occur on the vertical sides off the central meridian. Angular and length distortions positively correlate to the increase in latitudes and the spanning of longitudes away from a chosen central meridian. This direct partition only generates a small number of broken grids that can be treated individually.

One-step immobilization of tris(2,2 '-bipyridyl)ruthenium(II) via vapor-surface sol-gel deposition towards solid-state electrochemiluminescence detection

A novel method for immobilization of tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)(3)Cl-2) on electrode surfaces based on the vapor-surface sol-gel deposition strategy is first demonstrated in this paper. Ru(bpy)(3)Cl-2 immobilized sol-gel (Ru(bpy)(3)Cl-2/sol-gel) films were characterized by UV-vis spectroscopy and field-emitted scanning electron microscopy (FE-SEM). These results showed that Ru(bpy)(3)Cl-2 was successfully incorporated into the silica sol-gel film. it was found that many irregular Ru(bpy)(3)Cl-2/sol-gel clusters were formed on surfaces through one deposition and thick sol-gel films were observed after further deposition.

Fabrication of Iron Oxide Core/Gold Shell Submicrometer Spheres with Nanoscale Surface Roughness for Efficient Surface-Enhanced Raman Scattering

A method to synthesize Fe3O4 core/Au shell submicrometer structures with very rough surfaces on the nanoscale is reported. The Fe3O4 particles were first modified with uniform polymers through the layer-by-layer technique and then adsorbed a lot of gold nanoseeds for further Au shell formation. The shell was composed of a large number of irregular nanoscale An particles arranged randomly, and there were well-defined boundaries between these Au nanoparticles. The Fe3O4 core/Au shell particles showed strong plasmon resonance absorption in the near-infrared range, and can be separated quickly from solution by an external magnet.

Spontaneous formation of two-dimensional gold networks at the air-water interface and their application in surface-enhanced Raman scattering (SERS)

Two-dimensional (2-D) gold networks were spontaneously formed at the air-water interface after HAuCl4 reacted with fructose at 90 degrees C in a sealed vessel, in a reaction in which fructose acted as both a reducing and a protecting agent. Through fine-tuning of the molar ratio of HAuCl4 to fructose, the thus-formed 2-D gold networks can be changed from a coalesced pattern to an interconnected pattern. In the coalesced pattern, some well-defined single-crystalline gold plates at the micrometer-scale could be seen, while in the interconnected pattern, many sub-micrometer particles and some irregular gold plates instead of well-defined gold plates appeared. It is also found that the 2-D gold networks in the form of an interconnected pattern can be used as substrates for surface-enhanced Raman scattering (SERS) because of the strong localized electromagnetic field produced by the gaps between the neighboring particles in the 2-D gold networks.

Nanoelectrode ensembles based on semi-interpenetrating network of carbon nanotubes

A method for preparing nanoelectrode ensembles based on semi-interpenetrating network (SIN) of multi-walled carbon nanotubes (MWNTs) on gold electrode through phase-separation method is initially proposed. Individual nanoelectrode owns irregular three-dimensional MWNTs networks, which is denoted as SIN-MWNTs. On the as-prepared SIN-MWNTs nanoelectrode ensembles, the assembled MWNTs clusters in nanoscale serve as individual nanoelectrode and the electroinactive lipid networks located on the top of alkanethiol monolayer are used as a shielding layer. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), tapping-mode atomic force microscopy (TM-AFM) and scanning electron microscopy (SEM) were used to characterize the as-prepared SIN-MWNT nanoelectrode ensembles. Experimental results indicate that the well-defined nanoelectrode ensembles were prepared through self-assembly technology. Meantime, sigmoid curves in a wide scanning range can be obtained in CV experiments. This study may pave the way for the construction of truly nanoscopic nanoelectrode arrays by bottom-up strategy.

Effect of cerium on microstructure and electrochemical performance of Ti-V-Cr-Ni electrode alloy

Effect of cerium on the microstructure and electrochemical performance of the Ti0.25V0.35-xCexCr0.1Ni0.3 (x = 0, 0.005) electrode alloy was investigated by X-ray diffraction (XRD), field emission scanning electron microscopy/energy dispersive X-ray spectrometry (FESEM-EDS), and electrochemical impedance spectroscopy (EIS) measurements. On the basis of XRD and FESEM-EDS analysis, the alloy was mainly composed of V-based solid solution with body-centered-cubic structure and TiNi-based secondary phase. Ce did not exist in two phases, instead, it existed as Ce-rich small white particles, with irregular edges, distributed near the grain boundaries of the V-based solid solution phase. Discharge capacity, cycle stability, and high-rate discharge ability of the alloy electrode were effectively improved with the addition of Ce at 293 K. It was very surprising that the charge retention was abnormal with larger discharge capacity after standing at the open circuit for 24 h. EIS indicated that addition of Ce improved the dynamic performance, which caused the charge transfer resistance (R-T) to decrease and exchange current density (I-0) to increase markedly. The exchange current density of the electrochemical reaction on the alloy surface with Ce addition was about 2.07 and 3.10 times larger than that of the alloy without Ce at 303 and 343 K, respectively.