Distribuição dos Hydrozoa até agora conhecidos nas costas do Brasil

This work was done with the aim of computing all the species of Hydrozoa (Siphonophora excluded) that have been collected on the Brazilian coast, or in the pelagial, near the coast (some of the "Meteor" Stations). Nutting's (1900, 1904, 1915) and Mayer's (1910) monographs were taken as starting points and later papers and the Zoological Record used to check posterior findings. As a whole, 116 different valid names, among species and forms, have been mentioned from the Brazilian coast, distributed among 60 genera. Of the 116 species, 82 are represented by hydropolyps, 30 by hydromedusae (11 of which belong to the Trachylina and therefore lack a polypoid generation) and finally, by 4 species of which are known both polypoid and medusoid generations. The subdivision of the coast has been made at random, on account of the scarcity of the findings, except for the best known district, that goes from the latitude of Vitoria (State of Espirito Santo, at about 20ºlat.S.) to the bay of Santos (State of São Paulo, about 24ºlat.S.). The latitude of Cabo Frio (23ºlat.S.) was considered as a possible natural barrier, and the results of the global counting of the distribution of the hydropolyps North and South of 23ºlat.S. is the following: 29 species are known only North of Cabo Frio, 26 only from the same latitude (see direction of the coast, along parallel 23ºS.) or further South and 28 species are known both North and South of the coast (of these, 5 species are "cosmopolitan"). Therefore it seems quite possible that Cabo Frio really is a barrier to the distribution of 55 species. 26 species are endemic to the Brazilian coast, of these, only 5 are found both North and South of the Cape, while-14 are found only North and 7 only South. No studies can be done, on the bathymetric distribution in relation to the latitude. These results must be considered as provisory since more extensive researches will probably alter these figures. However, I believe that they are significative as a mean index of the condition of the hydrozoan fauna of the Brazilian coast. A tentative working hypothesis is presented as to the possible factors that confer such a zoogeographic importance to the region of Cabo Frio, a fact that has been foreseen by Ekman (1935, p. 73). Geographic position, currents, latitude and nature of the sea bottom between the continent and the oceanic island of Trindade have been taken in consideration, and all of them seem to be possible eficient factors of separation. Furthermore, according to the data obtained by the "Meteor" Expedition in July 2, 1926, at station 164 (23º8'lat.S. - 42º5'long.W.) and station 165 (23º35'lat.S. - 40º52'long.W.) and by what is known by hearsay and local experience of the region (exact continued study is urgently needed), it seems possible that, off from the sharp curve that the coast has at Cabo Frio, there may be an irregularity of the general scheme of the current and local upwelling may be present that would explain the local low temperature, low salinity and high density of the superficial layers as well as the abundance of fishes; these factors might contribute towards the establishement of a zoogeographical barrier. Further work is needed and nothing more than an hypothesis can be presented for the moment.

Kustannukset ja kannattavuus RFID- ja toiminnanohjausjärjestelmien integrointiprojektissa

Maailmantalouden jyrkkä lasku vuonna 2008 ajoi yritykset säästökuurille. Säästöjä pyritään saamaan esimerkiksi automatisoimalla toimintoja. Yksi tapa luoda kustannussäästöjä on käyttää RFIDteknologiaa varastoinnin toimien tehostukseen. Tämän tutkimuksen pääasiallisena tavoitteena on ollut rakentaa yksinkertainen laskentamalli RFID- ja toiminnanohjausjärjestelmien integrointiprojektin kustannusten ja kannattavuuden laskemiseen. Toisena tavoitteena on ollut selvittää, mitkä tekijät vaikuttavat investoinnin kannattavuuteen. Tutkimus rajattiin tarkastelemaan varaston saapuvan tavaran vastaanoton prosessia ja sen toimintojen automatisointia RFID-järjestelmän avulla. Laskentamalli muodostuu kolmesta osasta: investoinnin kokonaiskustannusten arvioinnista, investoinnista saatavien kustannussäästöjen arvioinnista ja kannattavuuslaskelmista. Investointien kokonaiskustannusten arviointia varten rakennettiin luettelo yleisimmistä kustannuslajeista. Investoinnista saatavien kustannussäästöjen arviointi tehtiin analysoimalla nykyprosesseja ja etsimällä niistä toimintoja, jotka tehostuvat RFID-järjestelmän avulla. Varsinaisina kannattavuuslaskentamenetelminä käytettiin investoinnin takaisinmaksuajan menetelmää sekä pääoman tuottoasteen menetelmää. Tutkimuksen tuloksena todettiin rakennetun laskentamallin soveltuvan hyvin investoinnin kustannusten ja kannattavuuden arviointiin. Samalla havaittiin yrityksen toimialan, saapuvien lähetysten määrän ja lähetysten rivimäärän vaikuttavan merkittävästi RFID- jatoiminnanohjausjärjestelmän integrointiprojektin kannattavuuteen.

Electrometric studies on formation of cerium vanadates as a function of pH

The precise nature of the reaction between nitric acid and sodium ortho-vanadate solutions has been studied by means of electrometric techniques involving potentiometric and conductometric titrations. The well defined inflections and breaks in the titration curves confirm the existence of the anions, pyro-V2O7(4-), meta-VO3- and poly-H2V10O28(4-) corresponding to the ratios of VO4(3-):H+ as 1:1, 1:2 and 1:2.6 in the neighborhood of pH 10.5, 7.4 and 3.6, respectively. The interaction of cerium(III) nitrate with sodium vanadate solutions, at specific pH levels 12.4, 10.5, 7.4 and 3.6 was also studied by potentiometric and conductometric titrations between the reactants. The end-points obtained from the sharp inflections in the titration curves provide definite evidence for the formation and precipitation of cerium ortho-Ce2O3.V2O5, pyro-2Ce2O3.3V2O5 and meta-Ce2O3.3V2O5 vanadates in the neighborhood of pH 7.4, 6.2 and 4.8, respectively. Analytical investigations on the precipitates formed confirm the results of the electrometric study.

Diameter structure of stratum and ecological groups of a Semideciduous Forest area in Dionísio-MG

The objective of this study was to obtain homogeneous groups of species and information on their density, dominance and volume, in terms of ecological group and diameter structure of an area of Submontane Semideciduous forest (Mata do Mumbaça) in Dionísio, MG. This work was conducted with data of the diameter distribution per species from floristic and phytosociological (Mata do Mumbaça) survey of 120 plots with 10 x 10 m each one. The 120 plots were contiguous and corresponding to a total sample area of 12,000 m² distributed over the topographic units (Low Ramp, Lower Slope, Upper Slope and Hill Top). The topographic units Low Ramp, Lower Slope and Upper Slope were in the middle stage of succession as they presented incipient stratification into two strata (canopy and understory) i.e. canopy ranging from 5 to 12 m high. However, the stratum Hill Top was classified as intermediate/advanced succession because it had a total height equal to or greater than 12 m. The distribution of individual trees of the four strata on diameter classes showed a typical J-inverted pattern that is, high concentration of individuals in smaller diameter classes and a sharp reduction towards the larger classes. In relation to absolute dominance and total volume of species, the ecological group that stood out in the four strata (Low Ramp, Lower Slope, Upper Slope and Hill Top) was the initial secondary, which were in the intermediate stage of secondary, rapidly developing into the mature phase.

Energiapuun haketuksen ja murskauksen kustannukset

Energiapuun tuotannossa puu on hienonnettava kuljettimille ja kattilaan sopivaan kokoon. Tämä tehdään Suomessa yleensä joko metsätien varressa välivarastolla, keskitetyssä terminaalissa tai voimalaitoksella. Puu hienonnetaan joko terävillä terillä hakettamalla tai tylpemmillä työkaluilla murskaamalla. Hakkeessa on vähemmän käsittelyä haittaavia pitkiä tikkuja ja sen valmistamiseen tarvittava energia on hiukan pienempi kuin murskaimilla. Viimeksi mainitulla on merkitystä lähinnä karsittua puuta haketettaessa. Murskain puolestaan sallii enemmän epäpuhtauksia raaka-aineessa, joten esimerkiksi kantoja käsitellään vain murskaimilla. Tässä tarkastellaan erityisesti pienpuun haketuksen ja murskauksen kustannuksia. Pienpuuta saadaan nuoren metsän kunnostuksista ja ensiharvennuksista. Se voi olla joko karsimatonta kokopuuta tai karsittua rankaa. Kokonaiskustannukset pienpuun haketukselle tai murskaukselle ovat tämän tutkimuksen mukaan välivarastolla noin 3,4 euroa/MWh ja terminaalilla tai voimalaitoksella noin 2 euroa/MWh. Pääomakustannukset ovat pienpuulla tavallisesti 1-1,2 euroa/MWh, keskitetyllä terminaalilla toimittaessa noin kolmanneksen vähemmän, jos pääomalle asetetaan 10% tuottovaatimus. Työvoimakustannukset ovat 30-80 snt/MWh varaston ja laitteen koosta riippuen, käyttöenergia dieselmoottoria käytettäessä noin 50 snt/MWh, sähkömoottorilla noin 30 snt/MWh. Muut kulut, mm. huolto, ovat yhteensä 40-80 snt/MWh. Energiapuun hankinnan kokonaiskustannuksista raaka-aineen hienontamisen osuus on 10-30% puutavaran lajista ja käytetystä työmenetelmästä riippuen. Terminaaleilla ja voimalaitoksilla toimittaessa on usein kiinnitettävä huomiota melun- ja pölyntorjuntaan. Muun muassa näistä syistä saattaa kiinteä, sähkökäyttöinen murska olla sopiva sellaisiin kohteisiin, joissa käsiteltävät määrät ovat suuria ja toiminta pysyvää. Melun ja pölyn kunnollinen torjunta vaatii suuria rakenteita, joita on vaikea yhdistää liikuteltaviin laitteisiin.

Mechanical damage during harvest and loading affect orange postharvest quality

Brazil is the world’s largest orange producer; however, part of this production is lost during postharvest. This loss can be minimized by controlling incidence of physical damage throughout the harvest and loading operations. Impacts can negatively modify quantitative and qualitative fruits aspects. The main goal of this study was to measure the impact magnitude in two types of harvest (manual and detachment) and during all steps from picking into bags until loading for transport to the processing industry and additionally evaluating, in laboratory, the physico-chemical quality of the fruit subjected to various impacts, similar to those found in the field. In order to evaluate the impact magnitude, an instrumented sphere was used (760 mm, Techmark, Inc, USA). The following physico-chemical parameters were evaluated during 6-days of storage: weight loss, soluble solids contents, titratable acidity, ascorbic acid content, pH, firmness and peel color. The greatest impacts were observed during harvest, during the detachment practice, and when loading and unloading from bulk storage, with average acceleration values between 249.5 and 531.52G. The impact incidence in oranges were responsible for reducing the soluble solids, titratable acidity, ascorbic acid and weight by to 5.5%; 8.7%; 4.6% and 0.5%, respectively, compared to the control. Impacts during harvest and the various pre-industry manipulation steps must be controlled as they interfere in postharvest quality and physiology of ‘Valência’ oranges.

Protocolo eletrônico para coleta estruturada de dados clínicos para pacientes pediátricos em terapia nutricional utilizando o SINPE© (Sistema Integrado de Protocolos Eletrônicos)

OBJETIVO: Criar uma base de dados clínicos de terapia nutricional de pacientes pediátricos, informatizar os dados transformando-os em protocolo eletrônico, criar um meio de integração com outros centros médicos a fim de aplicar a base de dados de maneira multicêntrica. MÉTODO: a base de dados foi desenvolvida a partir de busca na literatura médica, em livros-texto e artigos científicos sobre terapia nutricional em pediatria. Inicialmente foi organizado um protocolo mestre, e posteriormente o mesmo foi dividido em dois protocolos específicos, um de admissão e outro de evolução do paciente. A informatização da base de dados foi realizada mediante programa de computador, desenvolvido em linguagem C# (C - Sharp), pelo laboratório eletrônico de pesquisas clínicas do Hospital de Clínicas da Universidade Federal do Paraná. RESULTADOS: o protocolo eletrônico desenvolvido permite armazenar informações clínicas, laboratoriais e complementares de pacientes pediátricos em terapia nutricional. Após a inclusão hierarquizada de todos os itens, foram distribuídos 6694 itens no protocolo mestre, sendo 392 no item Admissão e 6302 em Evolução. CONCLUSÃO: a criação de uma base de coleta de dados de pacientes pediátricos em terapia nutricional foi possível, a informatização da mesma foi factível e existe a possibilidade de integração de diferentes centros para realização de estudos multicêntricos.

Bioactive Glass in Lumbar Spondylodesis. A Pre-Clinical and Clinical Study

Bioactive glasses (BGs) form a group of synthetic, surface-active, composition-dependent, silica-based biomaterials with osteoconductive, osteopromotive, and even angiogenic, as well as antibacterial, properties. A national interdisciplinary research group, within the Combio Technology Program (2003–2007), developed a porous load-bearing composite for surgical applications made of BG 1–98 and polymer fibers. The pre-clinical part of this thesis focused on the in vitro and in vivo testing of the composite materials in a rabbit femur and spinal posterolateral fusion model. The femur model failed to demonstrate the previously seen positive effect of BG 1–98 on osteogenesis, probably due to the changed resorption properties of BG in the form of fibers. The spine study was terminated early due to adverse events. In vitro cultures showed the growth inhibition of human mesenchymal stems next to BG 1–98 fibers and radical pH changes. A prospective, long-term, follow-up study was conducted on BG–S53P4 and autogenous bone used as bone graft substitutes for instrumented posterolateral spondylodesis in the treatment of degenerative spondylolisthesis (n=17) and unstable burst fractures (n=10) during 1996–1998. The operative outcome was evaluated from X-rays and CT scans, and a clinical examination was also performed. On the BG side, a solid fusion was observed in the CT scans of 12 patients, and a partial fusion was found in 5 patients, the result being a total fusion rate in all fusion sites (n=41) 88% for levels L4/5 and L5/S1 in the spondylolisthesis group. In the spine fracture group, solid fusion was observed in five patients, and partial fusion was found in five resulting in a total fusion rate of 71% of all fusion sites (n=21). The pre-clinical results suggest that under certain conditions the physical form of BG can be more critical than its chemical composition when a clinical application is designed. The first long-term clinical results concerning the use of BG S53P4 as bone graft material in instrumented posterolateral spondylodesis seems to be a safe procedure, associated with a very low complication rate. BG S53P4 used as a stand-alone bone substitute cannot be regarded as being as efficient as AB in promoting solid fusion.

Prevalence of radiographic markers of femoroacetabular impingement in asymptomatic adults

OBJECTIVE: to determine the prevalence of radiographic signs of femoroacetabular impingement (FAI) in asymptomatic adults and correlate them with data from physical examinations. METHODS: We conducted a cross-sectional study with 82 asymptomatic volunteers, 164 hips, between 40 and 60 years of age, selected by convenience. They were submitted to anamnesis and clinical examination of the hip, anteroposterior (AP) pelvis radiographs with three incidences, Dunn 45° and Lequesne false profile of each hip, to measure the variables. We measured the alpha angle, anterior offset of the femoral neck, cervical diaphyseal angle, CE angle of Wiberg, acetabular index, Sharp angle, and the crossing, ischial spine and posterior wall signs. RESULTS: our sample consisted of 66% women, mean age of 50.4 years. The average alpha angle was 45.10°, SD=8.6. One quarter of the hips showed alpha angle greater than or equal to 50°; among men the prevalence was 34%, and among women, 11%. We found indicative radiographic signs of femoroacetabular impingement in 42.6% of hips, whether femoral or acetabular, and the increased alpha angle was related to the decrease in hip internal rotation (p<0.001). CONCLUSION: the radiographic findings of femoroacetabular impingement in asymptomatic patients were frequent in the studied sample. The increase in alpha angle was associated with decreased internal rotation.

Medico-legal litigation in Obstetrics: a characterization analysis of a decade in Portugal

PURPOSE: It was to analyse the most critical areas in Obstetrics and to suggest measures to reduce or avoid the situations most often involved in these disputes. METHODS: Obstetrics cases submitted to the Medico-legal Council since the creation of the National Institute of Legal Medicine and Forensic Sciences in 2001 until 2011 were evaluated. A comprehensive characterization, determination of absolute/relative frequencies, hypothesis of a linear trend over the years and the association between each parameter was done. RESULTS: The analysis has shown no significantly linear trend. The most common reasons for disputes were perinatal asphyxia (50%), traumatic injuries of the newborn (24%), maternal sequelae (19%) and issues related to prenatal diagnosis and/or obstetric ultrasound (5.4%). Perinatal asphyxia showed no significantly linear trend (p=0.58) and was usually related to perinatal deaths or permanent neurologic sequelae in newborn children. Traumatic injuries of the newborn, mostly related to instrumented deliveries, shoulder dystocia or vaginal delivery in breech presentation, has shown a significantly increased linear trend (p<0.001), especially related to instrumented deliveries. The delay/absence of cesarean section was the clinical procedure questioned in a significantly higher number of cases of perinatal asphyxia (68.7%) and of traumatic lesions of the newborn due to instrumented deliveries (20.5%). CONCLUSION: It is important to improve and correct theoretical/practical daily clinical performance in these highlighted areas, in order to reduce or even avoid situations that could end up in medico-legal litigations.

Surface transformation hardening of carbon steel with high power fiber laser

This study investigated the surface hardening of steels via experimental tests using a multi-kilowatt fiber laser as the laser source. The influence of laser power and laser power density on the hardening effect was investigated. The microhardness analysis of various laser hardened steels was done. A thermodynamic model was developed to evaluate the thermal process of the surface treatment of a wide thin steel plate with a Gaussian laser beam. The effect of laser linear oscillation hardening (LLOS) of steel was examined. An as-rolled ferritic-pearlitic steel and a tempered martensitic steel with 0.37 wt% C content were hardened under various laser power levels and laser power densities. The optimum power density that produced the maximum hardness was found to be dependent on the laser power. The effect of laser power density on the produced hardness was revealed. The surface hardness, hardened depth and required laser power density were compared between the samples. Fiber laser was briefly compared with high power diode laser in hardening medium-carbon steel. Microhardness (HV0.01) test was done on seven different laser hardened steels, including rolled steel, quenched and tempered steel, soft annealed alloyed steel and conventionally through-hardened steel consisting of different carbon and alloy contents. The surface hardness and hardened depth were compared among the samples. The effect of grain size on surface hardness of ferritic-pearlitic steel and pearlitic-cementite steel was evaluated. In-grain indentation was done to measure the hardness of pearlitic and cementite structures. The macrohardness of the base material was found to be related to the microhardness of the softer phase structure. The measured microhardness values were compared with the conventional macrohardness (HV5) results. A thermodynamic model was developed to calculate the temperature cycle, Ac1 and Ac3 boundaries, homogenization time and cooling rate. The equations were numerically solved with an error of less than 10-8. The temperature distributions for various thicknesses were compared under different laser traverse speed. The lag of the was verified by experiments done on six different steels. The calculated thermal cycle and hardened depth were compared with measured data. Correction coefficients were applied to the model for AISI 4340 steel. AISI 4340 steel was hardened by laser linear oscillation hardening (LLOS). Equations were derived to calculate the overlapped width of adjacent tracks and the number of overlapped scans in the center of the scanned track. The effect of oscillation frequency on the hardened depth was investigated by microscopic evaluation and hardness measurement. The homogeneity of hardness and hardened depth with different processing parameters were investigated. The hardness profiles were compared with the results obtained with conventional single-track hardening. LLOS was proved to be well suitable for surface hardening in a relatively large rectangular area with considerable depth of hardening. Compared with conventional single-track scanning, LLOS produced notably smaller hardened depths while at 40 and 100 Hz LLOS resulted in higher hardness within a depth of about 0.6 mm.

Lectin histochemical aspects of the ovarian lamellae epithelium of Genypterus blacodes (Schneider, 1801)

The composition and distribution of the glycoconjugates (GCs) secreted by the epithelium of ovarian lamellae with reference to the reproductive biology of Genypterus blacodes (Schneider, 1801) through lectin hi stochemistry is here discussed. In this species, the epithelial cells that line the ovarian cavity presented sharp morphological variations along the reproductive cycle related to the mucus secretion that accompanies oocyte ma turation. During sp awning season, residues of mannose and N-acetylglucosamine were detected in the glycocalyx of those cells using lectinhistochemistry. N- acetylgalactosamine and fucose were also observed in the same zone. The greatest variations in the lectinhistochemical pattern were found in the apical cytoplasm composition in comparison to the basal zone of the cells. The results of the present study were discussed by comparing their possible functional implications.

Hyperbolic type metrics and distortion of quasiconformal map pings

This Ph.D. thesis consists of four original papers. The papers cover several topics from geometric function theory, more specifically, hyperbolic type metrics, conformal invariants, and the distortion properties of quasiconformal mappings. The first paper deals mostly with the quasihyperbolic metric. The main result gives the optimal bilipschitz constant with respect to the quasihyperbolic metric for the M¨obius self-mappings of the unit ball. A quasiinvariance property, sharp in a local sense, of the quasihyperbolic metric under quasiconformal mappings is also proved. The second paper studies some distortion estimates for the class of quasiconformal self-mappings fixing the boundary values of the unit ball or convex domains. The distortion is measured by the hyperbolic metric or hyperbolic type metrics. The results provide explicit, asymptotically sharp inequalities when the maximal dilatation of quasiconformal mappings tends to 1. These explicit estimates involve special functions which have a crucial role in this study. In the third paper, we investigate the notion of the quasihyperbolic volume and find the growth estimates for the quasihyperbolic volume of balls in a domain in terms of the radius. It turns out that in the case of domains with Ahlfors regular boundaries, the rate of growth depends not merely on the radius but also on the metric structure of the boundary. The topic of the fourth paper is complete elliptic integrals and inequalities. We derive some functional inequalities and elementary estimates for these special functions. As applications, some functional inequalities and the growth of the exterior modulus of a rectangle are studied.

Decreased expression of cardiac troponin C is associated with cardiac lesions in Amorimia exotropica poisoned cattle

The plants which cause sudden death of cattle in Brazil occupy a leading position for losses in the cattle industry. Amorimia exotropica is one of the plants pertaining to this group. Diagnostic findings in these cases may be inconclusive; further knowledge is necessary. This paper identifies cardiac lesions through anti-cardiac troponin C (cTnC) immunehistochemistry performed in tissues from cattle poisoned after consumption of A.exotropica in southern Brazil. Heart fragments from nine A. exotropica-poisoned cattle were studied immunohistochemically using anti-human cTnC as the primary antibody. In the hearts from all of the poisoned cattle, there was a sharp decrease in the cTnC expression level in the cytoplasm of groups of cardiomyocytes. A significant decrease in anti-cTnC immunoreactivity occurred particularly in degenerated or necrotic cardiomyocytes. Occasional groups of cells showed complete loss of immunolabeling. In the remaining intact cardiomyocytes from poisoned cattle and in cardiomyocytes from six cattle that died from other causes there was intense cytoplasmic staining.

Macroscopic description of the external and middle ear of paca (Cuniculus paca Linnaeus, 1766)

Abstract: Paca (Cuniculus paca), one of the largest rodents of the Brazilian fauna, has inherent characteristics of its species which can conribute as a new option for animal experimantation. As there is a growing demand for suitable experimental models in audiologic and otologic surgical research, the gross anatomy and ultrastructural ear of this rodent have been analyzed and described in detail. Fifteen adult pacas from the Wild Animals Sector herd of Faculdade de Ciências Agrárias e Veterinárias, Unesp-Jaboticabal, were used in this study. After anesthesia and euthanasia, we evaluated the entire composition of the external ear, registering and ddescribing the details; the temporal region was often dissected for a better view and detailing of the tympanic bulla which was removed and opened to expose the ear structures analyzed mascroscopically and ultrastructurally. The ear pinna has a triangular and concave shape with irregular ridges and sharp apex. The external auditory canal is winding in its path to the tympanic mebrane. The tympanic bulla is is on the back-bottom of the skull. The middle ear is formed by a cavity region filled with bone and membranous structures bounded by the tympanic membrane and the oval and round windows. The tympanic membrane is flat and seals the ear canal. The anatomy of the paca ear is similar to the guinea pig and from the viewpoint of experimental model has major advantages compared with the mouse ear.