Towards a hybrid approach for adapting web graphical user interfaces to heterogeneous devices using context

Ubiquitous Computing promises seamless access to a wide range of applications and Internet based services from anywhere, at anytime, and using any device. In this scenario, new challenges for the practice of software development arise: Applications and services must keep a coherent behavior, a proper appearance, and must adapt to a plenty of contextual usage requirements and hardware aspects. Especially, due to its interactive nature, the interface content of Web applications must adapt to a large diversity of devices and contexts. In order to overcome such obstacles, this work introduces an innovative methodology for content adaptation of Web 2.0 interfaces. The basis of our work is to combine static adaption - the implementation of static Web interfaces; and dynamic adaptation - the alteration, during execution time, of static interfaces so as for adapting to different contexts of use. In hybrid fashion, our methodology benefits from the advantages of both adaptation strategies - static and dynamic. In this line, we designed and implemented UbiCon, a framework over which we tested our concepts through a case study and through a development experiment. Our results show that the hybrid methodology over UbiCon leads to broader and more accessible interfaces, and to faster and less costly software development. We believe that the UbiCon hybrid methodology can foster more efficient and accurate interface engineering in the industry and in the academy.

The 3C cooperation model applied to the classical requirement analysis

Aspects related to the users' cooperative work are not considered in the traditional approach of software engineering, since the user is viewed independently of his/her workplace environment or group, with the individual model generalized to the study of collective behavior of all users. This work proposes a process for software requirements to address issues involving cooperative work in information systems that provide distributed coordination in the users' actions and the communication among them occurs indirectly through the data entered while using the software. To achieve this goal, this research uses ergonomics, the 3C cooperation model, awareness and software engineering concepts. Action-research is used as a research methodology applied in three cycles during the development of a corporate workflow system in a technological research company. This article discusses the third cycle, which corresponds to the process that deals with the refinement of the cooperative work requirements with the software in actual use in the workplace, where the inclusion of a computer system changes the users' workplace, from the face to face interaction to the interaction mediated by the software. The results showed that the highest degree of users' awareness about their activities and other system users contribute to a decrease in their errors and in the inappropriate use of the system.

Model-based reuse for crosscutting frameworks: assessing reuse and maintenance effort

Abstract Background Over the last years, a number of researchers have investigated how to improve the reuse of crosscutting concerns. New possibilities have emerged with the advent of aspect-oriented programming, and many frameworks were designed considering the abstractions provided by this new paradigm. We call this type of framework Crosscutting Frameworks (CF), as it usually encapsulates a generic and abstract design of one crosscutting concern. However, most of the proposed CFs employ white-box strategies in their reuse process, requiring two mainly technical skills: (i) knowing syntax details of the programming language employed to build the framework and (ii) being aware of the architectural details of the CF and its internal nomenclature. Also, another problem is that the reuse process can only be initiated as soon as the development process reaches the implementation phase, preventing it from starting earlier. Method In order to solve these problems, we present in this paper a model-based approach for reusing CFs which shields application engineers from technical details, letting him/her concentrate on what the framework really needs from the application under development. To support our approach, two models are proposed: the Reuse Requirements Model (RRM) and the Reuse Model (RM). The former must be used to describe the framework structure and the later is in charge of supporting the reuse process. As soon as the application engineer has filled in the RM, the reuse code can be automatically generated. Results We also present here the result of two comparative experiments using two versions of a Persistence CF: the original one, whose reuse process is based on writing code, and the new one, which is model-based. The first experiment evaluated the productivity during the reuse process, and the second one evaluated the effort of maintaining applications developed with both CF versions. The results show the improvement of 97% in the productivity; however little difference was perceived regarding the effort for maintaining the required application. Conclusion By using the approach herein presented, it was possible to conclude the following: (i) it is possible to automate the instantiation of CFs, and (ii) the productivity of developers are improved as long as they use a model-based instantiation approach.

Web Scale Discovery Systems – How to assess the best solution

The University of São Paulo has been experiencing the increase in contents in electronic and digital formats, distributed by different suppliers and hosted remotely or in clouds, and is faced with the also increasing difficulties related to facilitating access to this digital collection by its users besides coexisting with the traditional world of physical collections. A possible solution was identified in the new generation of systems called Web Scale Discovery, which allow better management, data integration and agility of search. Aiming to identify if and how such a system would meet the USP demand and expectation and, in case it does, to identify what the analysis criteria of such a tool would be, an analytical study with an essentially documental base was structured, as from a revision of the literature and from data available in official websites and of libraries using this kind of resources. The conceptual base of the study was defined after the identification of software assessment methods already available, generating a standard with 40 analysis criteria, from details on the unique access interface to information contents, web 2.0 characteristics, intuitive interface, facet navigation, among others. The details of the studies conducted into four of the major systems currently available in this software category are presented, providing subsidies for the decision-making of other libraries interested in such systems.

Aplicación web para la gestión de tareas siguiendo la metodología GTD

[ES] El Trabajo Final de Grado tiene por finalidad ofrecer una solución que ayude a las personas a gestionar sus tareas tanto personales como empresariales de una manera más productiva. Actualmente este tipo de aplicaciones tienen mucho éxito. Se decidió que el desarrollo de esta aplicación fuera con la metodología Getting Things Done (GTD) ya que es una metodología que aumenta la productividad y reduce el estrés laboral. A día de hoy, no hay muchas aplicaciones que utilice esta metodología y las que la utilizan lo hace de una forma muy básica. Junto a esta metodología y guiándonos de la experiencia del tutor se intentó combinar esta metodología con controles de tiempo para mejorar aún más la productividad de las personas que utiliza dicho software. El resultado obtenido de este trabajo final de grado fue la base de una aplicación web para la gestión de tareas. El software creado es totalmente funcional, muy fácil de usar, muy intuitivo, y usa la filosofía Getting Things Done . Básicamente los objetivos principales conseguidos en este proyecto fueron: la gestión de usuarios. La gestión de tareas y proyectos. Aplicación de la metodología GTD. Control del tiempo productivo, e improductivo, interrupciones, temporizadores. La aplicación ha sido realizada como Trabajo Final de Grado en Ingeniería Informática, cumpliendo con todas las fases del desarrollo del software, para obtener un producto funcional que fuera aprobado por el tutor que haría el rol de potencial cliente. En el presente proyecto se ha seguido la metodología RUP, dirigida por casos de uso, iterativa e incremental. Para completar el proceso se ha realizado la elaboración de una lista de características, la especificación de los casos de uso, una fase de análisis, una de diseño, implementación y prueba. Las tecnologías utilizadas han sido, principalmente, Ruby On Rails, HTML5, CSS , AJAX y JAVASCRIPT. El objetivo a largo plazo es que esta solución pueda ser tomada como base de implementación, donde haciendo las mejoras necesarias se pueda poner en el mercado un gran software de gestión de tareas siguiendo la metodología GTD.

SED Stroop Effect Detector prototype

[ES] El Detector de Efectos Stroop (SED - Stroop Effect Detector), es una herramienta informática de asistencia, desarrollada a través del programa de investigación de Desarrollo Tecnológico Social de la Universidad de Las Palmas de Gran Canaria, que ayuda a profesionales del sector neuropsicológico a identificar problemas en la corteza orbitofrontal de un individuo, usándose para ello la técnica ideada por Schenker en 1998. Como base metodológica, se han utilizado los conocimientos adquiridos en las diferentes materias de la adaptación al grado en Ingeniería Informática como Gestión del Software, Arquitectura del Software y Desarrollo de Interfaces de Usuario así como conocimiento adquirido con anterioridad en asignaturas de Programación e Ingeniería del Software I y II. Como para realizar este proyecto sólo el conocimiento informático no era suficiente, he realizado una labor de investigación acerca del problema, teniendo que recopilar información de otros documentos científicos que abordan el tema, consultas a profesionales del sector como son el Doctor Don Ayoze Nauzet González Hernández, neurólogo del hospital Doctor Negrín de Las Palmas de Gran Canaria y el psicólogo Don José Manuel Rodríguez Pellejero que habló de este problema en clase del máster de Formación del Profesorado y que actualmente estoy cursando. Este trabajo presenta el test de Stroop con las dos versiones de Schenker: RCN (Reading Color Names) y NCW (Naming Colored Words). Como norma general, ambas pruebas presentan ante los sujetos estudios palabras (nombres de colores) escritas con la tinta de colores diferentes. De esta forma, el RCN consiste en leer la palabra escrita omitiendo la tonalidad de su fuente e intentando que no nos influya. Por el contrario, el NCW requiere enunciar el nombre del color de la tinta con la que está escrita la palabra sin que nos influya que ésta última sea el nombre de un color.

Desarrollo de interfaces de usuario para una herramienta de telecontrol y automatización industrial

[ES] Este proyecto de fin de carrera aborda la actualización y refactorización de la aplicación Hecaton. Esta aplicación permite la monitorización y actuación en instalaciones industriales de manera remota a través de un interfaz web. Para ello hace uso de sensores y actuadores que, conectados a través de un equipo de adquisición de datos a un sistema informático servidor, permiten obtener, manipular y almacenar los datos y eventos recibidos. Hecaton ha sido desarrollado enteramente utilizando software libre. Además, el sistema permite ser personalizado, lo que posibilita su uso en todo tipo de escenarios, siendo el usuario quién define las reglas de funcionamiento. Este trabajo se trata del cuarto ciclo de desarrollo, pues la aplicación ha sido crea y ampliada en otros tres proyectos. En este último desarrollo se han actualizado las tecnologías y herramientas que forman parte de la aplicación. Se ha puesto especial énfasis en el rediseño de la interfaz web, adoptando el uso de las últimas tecnologías web que permiten un funcionamiento dinámico de la misma. Por otro lado se han corregido algunos errores de diseño e introducido el uso de nuevas herramientas para la gestión del proyecto software. Se trata por lo tanto de un ejercicio de refactorización software donde se ha puesto especial atención en conseguir un proyecto actualizado y que utilice metodologías de desarrollo actuales y que posibilite que sea actualizado en un futuro.

Entorno de desarrollo integral para el lenguaje de modelado Tara

Máster Universitario en Sistemas Inteligentes y Aplicaciones Numéricas en Ingeniería (SIANI)

Dynamic services in mobile ad hoc networks

The increasing diffusion of wireless-enabled portable devices is pushing toward the design of novel service scenarios, promoting temporary and opportunistic interactions in infrastructure-less environments. Mobile Ad Hoc Networks (MANET) are the general model of these higly dynamic networks that can be specialized, depending on application cases, in more specific and refined models such as Vehicular Ad Hoc Networks and Wireless Sensor Networks. Two interesting deployment cases are of increasing relevance: resource diffusion among users equipped with portable devices, such as laptops, smart phones or PDAs in crowded areas (termed dense MANET) and dissemination/indexing of monitoring information collected in Vehicular Sensor Networks. The extreme dynamicity of these scenarios calls for novel distributed protocols and services facilitating application development. To this aim we have designed middleware solutions supporting these challenging tasks. REDMAN manages, retrieves, and disseminates replicas of software resources in dense MANET; it implements novel lightweight protocols to maintain a desired replication degree despite participants mobility, and efficiently perform resource retrieval. REDMAN exploits the high-density assumption to achieve scalability and limited network overhead. Sensed data gathering and distributed indexing in Vehicular Networks raise similar issues: we propose a specific middleware support, called MobEyes, exploiting node mobility to opportunistically diffuse data summaries among neighbor vehicles. MobEyes creates a low-cost opportunistic distributed index to query the distributed storage and to determine the location of needed information. Extensive validation and testing of REDMAN and MobEyes prove the effectiveness of our original solutions in limiting communication overhead while maintaining the required accuracy of replication degree and indexing completeness, and demonstrates the feasibility of the middleware approach.

Tecniche per il controllo dinamico del consumo di potenza per piattaforme system-on-chip

Providing support for multimedia applications on low-power mobile devices remains a significant research challenge. This is primarily due to two reasons: • Portable mobile devices have modest sizes and weights, and therefore inadequate resources, low CPU processing power, reduced display capabilities, limited memory and battery lifetimes as compared to desktop and laptop systems. • On the other hand, multimedia applications tend to have distinctive QoS and processing requirementswhichmake themextremely resource-demanding. This innate conflict introduces key research challenges in the design of multimedia applications and device-level power optimization. Energy efficiency in this kind of platforms can be achieved only via a synergistic hardware and software approach. In fact, while System-on-Chips are more and more programmable thus providing functional flexibility, hardwareonly power reduction techniques cannot maintain consumption under acceptable bounds. It is well understood both in research and industry that system configuration andmanagement cannot be controlled efficiently only relying on low-level firmware and hardware drivers. In fact, at this level there is lack of information about user application activity and consequently about the impact of power management decision on QoS. Even though operating system support and integration is a requirement for effective performance and energy management, more effective and QoSsensitive power management is possible if power awareness and hardware configuration control strategies are tightly integratedwith domain-specificmiddleware services. The main objective of this PhD research has been the exploration and the integration of amiddleware-centric energymanagement with applications and operating-system. We choose to focus on the CPU-memory and the video subsystems, since they are the most power-hungry components of an embedded system. A second main objective has been the definition and implementation of software facilities (like toolkits, API, and run-time engines) in order to improve programmability and performance efficiency of such platforms. Enhancing energy efficiency and programmability ofmodernMulti-Processor System-on-Chips (MPSoCs) Consumer applications are characterized by tight time-to-market constraints and extreme cost sensitivity. The software that runs on modern embedded systems must be high performance, real time, and even more important low power. Although much progress has been made on these problems, much remains to be done. Multi-processor System-on-Chip (MPSoC) are increasingly popular platforms for high performance embedded applications. This leads to interesting challenges in software development since efficient software development is a major issue for MPSoc designers. An important step in deploying applications on multiprocessors is to allocate and schedule concurrent tasks to the processing and communication resources of the platform. The problem of allocating and scheduling precedenceconstrained tasks on processors in a distributed real-time system is NP-hard. There is a clear need for deployment technology that addresses thesemulti processing issues. This problem can be tackled by means of specific middleware which takes care of allocating and scheduling tasks on the different processing elements and which tries also to optimize the power consumption of the entire multiprocessor platform. This dissertation is an attempt to develop insight into efficient, flexible and optimalmethods for allocating and scheduling concurrent applications tomultiprocessor architectures. It is a well-known problem in literature: this kind of optimization problems are very complex even in much simplified variants, therefore most authors propose simplified models and heuristic approaches to solve it in reasonable time. Model simplification is often achieved by abstracting away platform implementation ”details”. As a result, optimization problems become more tractable, even reaching polynomial time complexity. Unfortunately, this approach creates an abstraction gap between the optimization model and the real HW-SW platform. The main issue with heuristic or, more in general, with incomplete search is that they introduce an optimality gap of unknown size. They provide very limited or no information on the distance between the best computed solution and the optimal one. The goal of this work is to address both abstraction and optimality gaps, formulating accurate models which accounts for a number of ”non-idealities” in real-life hardware platforms, developing novel mapping algorithms that deterministically find optimal solutions, and implementing software infrastructures required by developers to deploy applications for the targetMPSoC platforms. Energy Efficient LCDBacklightAutoregulation on Real-LifeMultimediaAp- plication Processor Despite the ever increasing advances in Liquid Crystal Display’s (LCD) technology, their power consumption is still one of the major limitations to the battery life of mobile appliances such as smart phones, portable media players, gaming and navigation devices. There is a clear trend towards the increase of LCD size to exploit the multimedia capabilities of portable devices that can receive and render high definition video and pictures. Multimedia applications running on these devices require LCD screen sizes of 2.2 to 3.5 inches andmore to display video sequences and pictures with the required quality. LCD power consumption is dependent on the backlight and pixel matrix driving circuits and is typically proportional to the panel area. As a result, the contribution is also likely to be considerable in future mobile appliances. To address this issue, companies are proposing low power technologies suitable for mobile applications supporting low power states and image control techniques. On the research side, several power saving schemes and algorithms can be found in literature. Some of them exploit software-only techniques to change the image content to reduce the power associated with the crystal polarization, some others are aimed at decreasing the backlight level while compensating the luminance reduction by compensating the user perceived quality degradation using pixel-by-pixel image processing algorithms. The major limitation of these techniques is that they rely on the CPU to perform pixel-based manipulations and their impact on CPU utilization and power consumption has not been assessed. This PhDdissertation shows an alternative approach that exploits in a smart and efficient way the hardware image processing unit almost integrated in every current multimedia application processors to implement a hardware assisted image compensation that allows dynamic scaling of the backlight with a negligible impact on QoS. The proposed approach overcomes CPU-intensive techniques by saving system power without requiring either a dedicated display technology or hardware modification. Thesis Overview The remainder of the thesis is organized as follows. The first part is focused on enhancing energy efficiency and programmability of modern Multi-Processor System-on-Chips (MPSoCs). Chapter 2 gives an overview about architectural trends in embedded systems, illustrating the principal features of new technologies and the key challenges still open. Chapter 3 presents a QoS-driven methodology for optimal allocation and frequency selection for MPSoCs. The methodology is based on functional simulation and full system power estimation. Chapter 4 targets allocation and scheduling of pipelined stream-oriented applications on top of distributed memory architectures with messaging support. We tackled the complexity of the problem by means of decomposition and no-good generation, and prove the increased computational efficiency of this approach with respect to traditional ones. Chapter 5 presents a cooperative framework to solve the allocation, scheduling and voltage/frequency selection problem to optimality for energyefficient MPSoCs, while in Chapter 6 applications with conditional task graph are taken into account. Finally Chapter 7 proposes a complete framework, called Cellflow, to help programmers in efficient software implementation on a real architecture, the Cell Broadband Engine processor. The second part is focused on energy efficient software techniques for LCD displays. Chapter 8 gives an overview about portable device display technologies, illustrating the principal features of LCD video systems and the key challenges still open. Chapter 9 shows several energy efficient software techniques present in literature, while Chapter 10 illustrates in details our method for saving significant power in an LCD panel. Finally, conclusions are drawn, reporting the main research contributions that have been discussed throughout this dissertation.

COBAMOS: Endnutzerprogrammierung auf Basis nachrichtenbasierter Komponentenvernetzung

Die Aufgabenstellung, welche dieser Dissertation zugrunde liegt, lässt sich kurz als die Untersuchung von komponentenbasierten Konzepten zum Einsatz in der Softwareentwicklung durch Endanwender beschreiben. In den letzten 20 bis 30 Jahren hat sich das technische Umfeld, in dem ein Großteil der Arbeitnehmer seine täglichen Aufgaben verrichtet, grundlegend verändert. Der Computer, früher in Form eines Großrechners ausschließlich die Domäne von Spezialisten, ist nun ein selbstverständlicher Bestandteil der täglichen Arbeit. Der Umgang mit Anwendungsprogrammen, die dem Nutzer erlauben in einem gewissen Rahmen neue, eigene Funktionalität zu definieren, ist in vielen Bereichen so selbstverständlich, dass viele dieser Tätigkeiten nicht bewusst als Programmieren wahrgenommen werden. Da diese Nutzer nicht notwendigerweise in der Entwicklung von Software ausgebildet sind, benötigen sie entsprechende Unterstützung bei diesen Tätigkeiten. Dies macht deutlich, welche praktische Relevanz die Untersuchungen in diesem Bereich haben. Zur Erstellung eines Programmiersystems für Endanwender wird zunächst ein flexibler Anwendungsrahmen entwickelt, welcher sich als Basis zur Erstellung solcher Systeme eignet. In Softwareprojekten sind sich ändernde Anforderungen und daraus resultierende Notwendigkeiten ein wichtiger Aspekt. Dies wird im Entwurf des Frameworks durch Konzepte zur Bereitstellung von wieder verwendbarer Funktionalität durch das Framework und Möglichkeiten zur Anpassung und Erweiterung der vorhandenen Funktionalität berücksichtigt. Hier ist zum einen der Einsatz einer serviceorientierten Architektur innerhalb der Anwendung und zum anderen eine komponentenorientierte Variante des Kommando-Musters zu nennen. Zum anderen wird ein Konzept zur Kapselung von Endnutzerprogrammiermodellen in Komponenten erarbeitet. Dieser Ansatz ermöglicht es, unterschiedliche Modelle als Grundlage der entworfenen Entwicklungsumgebung zu verwenden. Im weiteren Verlauf der Arbeit wird ein Programmiermodell entworfen und unter Verwendung des zuvor genannten Frameworks implementiert. Damit dieses zur Nutzung durch Endanwender geeignet ist, ist eine Anhebung der zur Beschreibung eines Softwaresystems verwendeten Abstraktionsebene notwendig. Dies wird durch die Verwendung von Komponenten und einem nachrichtenbasierten Kompositionsmechanismus erreicht. Die vorgenommene Realisierung ist dabei noch nicht auf konkrete Anwendungsfamilien bezogen, diese Anpassungen erfolgen in einem weiteren Schritt für zwei unterschiedliche Anwendungsbereiche.

Type Systems for Distributed Programs: Components and Sessions

Modern software systems, in particular distributed ones, are everywhere around us and are at the basis of our everyday activities. Hence, guaranteeing their cor- rectness, consistency and safety is of paramount importance. Their complexity makes the verification of such properties a very challenging task. It is natural to expect that these systems are reliable and above all usable. i) In order to be reliable, compositional models of software systems need to account for consistent dynamic reconfiguration, i.e., changing at runtime the communication patterns of a program. ii) In order to be useful, compositional models of software systems need to account for interaction, which can be seen as communication patterns among components which collaborate together to achieve a common task. The aim of the Ph.D. was to develop powerful techniques based on formal methods for the verification of correctness, consistency and safety properties related to dynamic reconfiguration and communication in complex distributed systems. In particular, static analysis techniques based on types and type systems appeared to be an adequate methodology, considering their success in guaranteeing not only basic safety properties, but also more sophisticated ones like, deadlock or livelock freedom in a concurrent setting. The main contributions of this dissertation are twofold. i) On the components side: we design types and a type system for a concurrent object-oriented calculus to statically ensure consistency of dynamic reconfigurations related to modifications of communication patterns in a program during execution time. ii) On the communication side: we study advanced safety properties related to communication in complex distributed systems like deadlock-freedom, livelock- freedom and progress. Most importantly, we exploit an encoding of types and terms of a typical distributed language, session π-calculus, into the standard typed π- calculus, in order to understand their expressive power.

Replaying past changes in multi-developer projects

What was I working on before the weekend? and What were the members of my team working on during the last week? are common questions that are frequently asked by a developer. They can be answered if one keeps track of who changes what in the source code. In this work, we present Replay, a tool that allows one to replay past changes as they happened at a fine-grained level, where a developer can watch what she has done or understand what her colleagues have done in past development sessions. With this tool, developers are able to not only understand what sequence of changes brought the system to a certain state (e.g., the introduction of a defect), but also deduce reasons for why her colleagues performed those changes. One of the applications of such a tool is also discovering the changes that broke the code of a developer.