A methodology to estimate the potential to move inpatient to one day surgery.

BACKGROUND: The proportion of surgery performed as a day case varies greatly between countries. Low rates suggest a large growth potential in many countries. Measuring the potential development of one day surgery should be grounded on a comprehensive list of eligible procedures, based on a priori criteria, independent of local practices. We propose an algorithmic method, using only routinely available hospital data to identify surgical hospitalizations that could have been performed as one day treatment. METHODS: Moving inpatient surgery to one day surgery was considered feasible if at least one surgical intervention was eligible for one day surgery and if none of the following criteria were present: intervention or affection requiring an inpatient stay, patient transferred or died, and length of stay greater than four days. The eligibility of a procedure to be treated as a day case was mainly established on three a priori criteria: surgical access (endoscopic or not), the invasiveness of the procedure and the size of the operated organ. Few overrides of these criteria occurred when procedures were associated with risk of immediate complications, slow physiological recovery or pain treatment requiring hospital infrastructure. The algorithm was applied to a random sample of one million inpatient US stays and more than 600 thousand Swiss inpatient stays, in the year 2002. RESULTS: The validity of our method was demonstrated by the few discrepancies between the a priori criteria based list of eligible procedures, and a state list used for reimbursement purposes, the low proportion of hospitalizations eligible for one day care found in the US sample (4.9 versus 19.4% in the Swiss sample), and the distribution of the elective procedures found eligible in Swiss hospitals, well supported by the literature. There were large variations of the proportion of candidates for one day surgery among elective surgical hospitalizations between Swiss hospitals (3 to 45.3%). CONCLUSION: The proposed approach allows the monitoring of the proportion of inpatient stay candidates for one day surgery. It could be used for infrastructure planning, resources negotiation and the surveillance of appropriate resource utilization.

The neural basis for writing from dictation in the temporoparietal cortex.

Cortical electrical stimulation mapping was used to study neural substrates of the function of writing in the temporoparietal cortex. We identified the sites involved in oral language (sentence reading and naming) and writing from dictation, in order to spare these areas during removal of brain tumours in 30 patients (23 in the left, and 7 in the right hemisphere). Electrostimulation of the cortex impaired writing ability in 62 restricted cortical areas (.25 cm2). These were found in left temporoparietal lobes and were mostly located along the superior temporal gyrus (Brodmann's areas 22 and 42). Stimulation of right temporoparietal lobes in right-handed patients produced no writing impairments. However there was a high variability of location between individuals. Stimulation resulted in combined symptoms (affecting oral language and writing) in fourteen patients, whereas in eight other patients, stimulation-induced pure agraphia symptoms with no oral language disturbance in twelve of the identified areas. Each detected area affected writing in a different way. We detected the various different stages of the auditory-to-motor pathway of writing from dictation: either through comprehension of the dictated sentences (word deafness areas), lexico-semantic retrieval, or phonologic processing. In group analysis, barycentres of all different types of writing interferences reveal a hierarchical functional organization along the superior temporal gyrus from initial word recognition to lexico-semantic and phonologic processes along the ventral and the dorsal comprehension pathways, supporting the previously described auditory-to-motor process. The left posterior Sylvian region supports different aspects of writing function that are extremely specialized and localized, sometimes being segregated in a way that could account for the occurrence of pure agraphia that has long-been described in cases of damage to this region.

Electronic Business Model for International Software Market

Tämän diplomityön tavoitteena on muodostaa sähköinen liiketoimintamalli kansainvälisen ohjelmistoyrityksen tarpeisiin. Ohjelmiston uusi ominaisuus antaa kolmansille osapuolille mahdollisuuden määritellä itse rakennusmallintamisessa tarvittavia komponentteja, mikä luo mahdollisuuden uuteen liiketoimintaan. Liiketoimintamallien teoria ja asiantuntijoiden haastattelut tulevat osoittamaan, että paras ratkaisu tässä tapauksessa on portaali, joka rakentuu komponenttimarkkinoista, e-kaupasta ja virtuaaliyhteisöstä. Komponenttimarkkinat on jaettu vapaaseen vaihdantaan ja sertifioitujen kehittäjien kaupankäyntiin. Tämä tarjoaa mahdollisuuksia kehittäjille valita sitoutuneisuutensa taso, samoin kuin motivoi heitä osallistumaan. E-kauppa on suunniteltu sovelluksille ja monimutkaisemmille komponenteille. Virtuaaliyhteisön kautta käyttäjät voivat keskustella mielipiteistään ja saada tukea ohjelmiston käyttämiseen sekä komponenttien kehittämiseen.

Novel FOXF1 Mutations in Sporadic and Familial Cases of Alveolar Capillary Dysplasia with Misaligned Pulmonary Veins Imply a Role for its DNA Binding Domain.

Alveolar capillary dysplasia with misalignment of pulmonary veins (ACD/MPV) is a rare and lethal developmental disorder of the lung defined by a constellation of characteristic histopathological features. Nonpulmonary anomalies involving organs of gastrointestinal, cardiovascular, and genitourinary systems have been identified in approximately 80% of patients with ACD/MPV. We have collected DNA and pathological samples from more than 90 infants with ACD/MPV and their family members. Since the publication of our initial report of four point mutations and 10 deletions, we have identified an additional 38 novel nonsynonymous mutations of FOXF1 (nine nonsense, seven frameshift, one inframe deletion, 20 missense, and one no stop). This report represents an up to date list of all known FOXF1 mutations to the best of our knowledge. Majority of the cases are sporadic. We report four familial cases of which three show maternal inheritance, consistent with paternal imprinting of the gene. Twenty five mutations (60%) are located within the putative DNA-binding domain, indicating its plausible role in FOXF1 function. Five mutations map to the second exon. We identified two additional genic and eight genomic deletions upstream to FOXF1. These results corroborate and extend our previous observations and further establish involvement of FOXF1 in ACD/MPV and lung organogenesis.

Family Alliance as a Moderator of the Link Between Maternal Postpartum Depression and Child Symptoms Assessed by Both Parents

We investigated the moderating effect of family relationships on the links between maternal postpartum depression and child symptoms in a low-risk community sample of families with 3-month-old infants (n = 57). The level of maternal depression was assessed by the Montgomery-Asberg Depression Rating Scale from a clinical interview, child symptoms by the Symptom Check List completed by both parents, and family relationships by direct observation of father-mother-baby interactions (Lausanne Trilogue Play). Families were categorized as high coordination or low coordination from their overall coordination level throughout the play. Results showed no significant links between maternal depression level and child symptoms reported by both parents. Mothers with a high depressive level in high coordination families tended to report more symptoms in their child than did mothers with lower depressive scores, whereas this link was not found in low coordination families. Prevention perspectives and clinical implications of these results are discussed.

Does the working environment influence health care professionals' values, meaning in life and religiousness? Palliative care units compared with maternity wards.

CONTEXT: Increased altruism, self-transcendence, and quests for meaning in life (MiL) have been found in palliative care (PC) patients and their families who experience the finiteness of life. Similar changes were observed in healthy subjects who were experimentally confronted with their mortality. OBJECTIVES: The study investigated how daily experiences of the transitoriness of life influence PC health care professionals' (HCPs) values, MiL, and religiousness. METHODS: In a cross-sectional study, the Schwartz Value Survey, the Schedule for Meaning in Life Evaluation, and the Idler Index of Religiosity were used to investigate personal values, MiL, and private religiousness. HCPs working in PC (confronted with death) were compared with a control group of HCPs working at maternity wards (MWs) using multivariate models. Differences were considered to be statistically significant at P < 0.05. RESULTS: Seventy PC- and 70 MW-HCPs took part in the study (response rate 74.0%). No differences between the groups were found in overall MiL satisfaction scores. PC-HCPs were significantly more religious than MW-HCPs; they listed spirituality and nature experience more often as areas in which they experience MiL. Furthermore, hedonism was more important for PC-HCPs, and they had higher scores in openness-to-change values (stimulation and self-direction). MW-HCPs were more likely to list family as a MiL area. They assigned more importance to health and scored higher in conservation values (conformity and security). Duration of professional experience did not influence these results. CONCLUSION: Basic differences in values, MiL, and religiousness between PC-HCPs and MW-HCPs might have influenced the choice of working environment because no effect of job duration was observed. Longitudinal research is needed to confirm this hypothesis.

Autonvalmistajan toimitusketjun tehostaminen Suomen sisäisellä yhteistyöllä

Tutkimuksen tavoitteena on selvittää, kuinka globaalin autonvalmistajan toimitusketjua voidaan tehostaa Suomen sisäisten yhteistyökumppaneiden kesken.Tarkoituksena on saada yksittäisten yritysten välisestä yhteistyöstä mahdollisimman paljon synergiaa koko toimitusketjun tehostamiseksi. Tutkimuksessa on käytetty hyväksi alan kirjallisuutta, case- yrityksen tietokantoja ja kerätty aineistoa haastattelemalla toimitusketjussa toimivien yritysten edustajia. Informaatiotekniikan kehitys on ollut runsasta viime vuosikymmenien aikana, mikä on mahdollistanut reaaliaikaisen yhteistyön globaaleissa toimitusketjuissa. Toimivan yhteistyöverkoston edellytyksenä ovat kuitenkin hyvin rakennetut toimintamallit, joissa toimitaan tehokkaasti koko toimitusketjun edun saavuttamiseksi. Tutkimuksen empiirisessä osassa esitellään vaihtoehtoisia toimintamalleja, joilla voidaan lisätä yhteistyötä jokaista osapuolta hyödyttävällä tavalla. Näintoimitusketjusta saadaan karsittua osaoptimointia ja tehotonta toimintaa. Tämänlisäksi annetaan ehdotuksia informaatiotekniikan laajempaan hyväksikäyttöön toimitusketjun eri yritysten välillä.

FPGA-Based Control Design for Power Electronic Applications

Tehoelektoniikkalaitteella tarkoitetaan ohjaus- ja säätöjärjestelmää, jolla sähköä muokataan saatavilla olevasta muodosta haluttuun uuteen muotoon ja samalla hallitaan sähköisen tehon virtausta lähteestä käyttökohteeseen. Tämä siis eroaa signaalielektroniikasta, jossa sähköllä tyypillisesti siirretään tietoa hyödyntäen eri tiloja. Tehoelektroniikkalaitteita vertailtaessa katsotaan yleensä niiden luotettavuutta, kokoa, tehokkuutta, säätötarkkuutta ja tietysti hintaa. Tyypillisiä tehoelektroniikkalaitteita ovat taajuudenmuuttajat, UPS (Uninterruptible Power Supply) -laitteet, hitsauskoneet, induktiokuumentimet sekä erilaiset teholähteet. Perinteisesti näiden laitteiden ohjaus toteutetaan käyttäen mikroprosessoreja, ASIC- (Application Specific Integrated Circuit) tai IC (Intergrated Circuit) -piirejä sekä analogisia säätimiä. Tässä tutkimuksessa on analysoitu FPGA (Field Programmable Gate Array) -piirien soveltuvuutta tehoelektroniikan ohjaukseen. FPGA-piirien rakenne muodostuu erilaisista loogisista elementeistä ja niiden välisistä yhdysjohdoista.Loogiset elementit ovat porttipiirejä ja kiikkuja. Yhdysjohdot ja loogiset elementit ovat piirissä kiinteitä eikä koostumusta tai lukumäärää voi jälkikäteen muuttaa. Ohjelmoitavuus syntyy elementtien välisistä liitännöistä. Piirissä on lukuisia, jopa miljoonia kytkimiä, joiden asento voidaan asettaa. Siten piirin peruselementeistä voidaan muodostaa lukematon määrä erilaisia toiminnallisia kokonaisuuksia. FPGA-piirejä on pitkään käytetty kommunikointialan tuotteissa ja siksi niiden kehitys on viime vuosina ollut nopeaa. Samalla hinnat ovat pudonneet. Tästä johtuen FPGA-piiristä on tullut kiinnostava vaihtoehto myös tehoelektroniikkalaitteiden ohjaukseen. Väitöstyössä FPGA-piirien käytön soveltuvuutta on tutkittu käyttäen kahta vaativaa ja erilaista käytännön tehoelektroniikkalaitetta: taajuudenmuuttajaa ja hitsauskonetta. Molempiin testikohteisiin rakennettiin alan suomalaisten teollisuusyritysten kanssa soveltuvat prototyypit,joiden ohjauselektroniikka muutettiin FPGA-pohjaiseksi. Lisäksi kehitettiin tätä uutta tekniikkaa hyödyntävät uudentyyppiset ohjausmenetelmät. Prototyyppien toimivuutta verrattiin vastaaviin perinteisillä menetelmillä ohjattuihin kaupallisiin tuotteisiin ja havaittiin FPGA-piirien mahdollistaman rinnakkaisen laskennantuomat edut molempien tehoelektroniikkalaitteiden toimivuudessa. Työssä on myösesitetty uusia menetelmiä ja työkaluja FPGA-pohjaisen säätöjärjestelmän kehitykseen ja testaukseen. Esitetyillä menetelmillä tuotteiden kehitys saadaan mahdollisimman nopeaksi ja tehokkaaksi. Lisäksi työssä on kehitetty FPGA:n sisäinen ohjaus- ja kommunikointiväylärakenne, joka palvelee tehoelektroniikkalaitteiden ohjaussovelluksia. Uusi kommunikointirakenne edistää lisäksi jo tehtyjen osajärjestelmien uudelleen käytettävyyttä tulevissa sovelluksissa ja tuotesukupolvissa.

ME - Mobile Electronic Personality

Digital services require personal information for a variety of reasons. Due to advances in communication technology, new types of services are evolving alongwith traditional Internet services. Due to the diversity of services, the traditional approaches to personal information handling designed for Internet services are inadequate. Therefore, new approaches are necessary. In this thesis, a solution where personal information is stored in and accessed from the user's mobile device is presented. This approach is called Mobile Electronic Personality (ME). The ME approach is compared to the existing approaches which rely on a database either at a service, a trusted third party or a client program. Various personal information properties are taken into account in the comparison of storage locations. The thesis presents both the internal and the communication architecture of the ME. The internal architecture defines how the information is stored in the mobile device. The communication architecture defines how the information can be accessed by different types of services from the ME. The use of the architecture is described for services in different environments. A simple ME based solution for the authentication of a user is defined. The authentication of service, which is required to protect the privacy of the users is also presented.

Evaluation of an electronic nose to assess fruit ripeness

The main goal of our study was to see whether an artificial olfactory system can be used as a nondestructive instrument to measure fruit maturity. In order to make an objective comparison, samples measured with our electronic nose prototype were later characterized using fruit quality techniques. The cultivars chosen for the study were peaches, nectarines, apples, and pears. With peaches and nectarines, a PCA analysis on the electronic nose measurements helped to guess optimal harvest dates that were in good agreement with the ones obtained with fruit quality techniques. A good correlation between sensor signals and some fruit quality indicators was also found. With pears, the study addressed the possibility of classifying samples regarding their ripeness state after different cold storage and shelf-life periods. A PCA analysis showed good separation between samples measured after a shelf-life period of seven days and samples with four or less days. Finally, the electronic nose monitored the shelf-life ripening of apples. A good correlation between electronic nose signals and firmness, starch index, and acidity parameters was found. These results prove that electronic noses have the potential of becoming a reliable instrument to assess fruit ripeness.

Guia de Microsoft Word 2003

Aquesta guia és una introducció a la creació de documents digitals accessibles amb el processador de textos Microsoft Word 2003.

Guia de Microsoft Word 2007

Aquesta guia és una introducció a la creació de documents digitals accessibles amb el processador de textos Microsoft Word 2007.

Guia per convertir documents Microsoft Word 2003 i 2007 a PDF

Aquesta guia explica com convertir documents Microsoft Word 2003 i 2007 a documents PDF.

Bioinspired electronic white cane implementation based on a LIDAR, a tri-axial accelerometer and a tactile belt

This work proposes the creation of a bioinspired electronic white cane for blind people using the whiskers principle for short-range navigation and exploration. Whiskers are coarse hairs of an animal's face that tells the animal that it has touched something using the nerves of the skin. In this work the raw data acquired from a low-size terrestrial LIDAR and a tri-axial accelerometer is converted into tactile information using several electromagnetic devices configured as a tactile belt. The LIDAR and the accelerometer are attached to the user’s forearm and connected with a wire to the control unit placed on the belt. Early validation experiments carried out in the laboratory are promising in terms of usability and description of the environment.

Ultrasonic and LIDAR sensors for electronic canopy characterization in vineyards: advances to improve pesticide application methods

Canopy characterization is a key factor to improve pesticide application methods in tree crops and vineyards. Development of quick, easy and efficient methods to determine the fundamental parameters used to characterize canopy structure is thus an important need. In this research the use of ultrasonic and LIDAR sensors have been compared with the traditional manual and destructive canopy measurement procedure. For both methods the values of key parameters such as crop height, crop width, crop volume or leaf area have been compared. Obtained results indicate that an ultrasonic sensor is an appropriate tool to determine the average canopy characteristics, while a LIDAR sensor provides more accuracy and detailed information about the canopy. Good correlations have been obtained between crop volume (CVU) values measured with ultrasonic sensors and leaf area index, LAI (R2 = 0.51). A good correlation has also been obtained between the canopy volume measured with ultrasonic and LIDAR sensors (R2 = 0.52). Laser measurements of crop height (CHL) allow one to accurately predict the canopy volume. The proposed new technologies seems very appropriate as complementary tools to improve the efficiency of pesticide applications, although further improvements are still needed.