992 resultados para Demanda crescente


Relevância:

20.00% 20.00%

Publicador:

Resumo:

One of society concerns are preserving the environment and the growing energy demand. These two issues are in conflict since most of the energy used today in some way harms the environment. Then is essential to develop and implement ways to clean and renewable energy. In this way, solar energy stands out as a source of clean energy, renewable, abundant and acessible. Solar energy can be harnessed by photovoltaic cells or by solar collectors. The aim of this article is analysethe yield of the solar heather assembled with hydraulic conductive and plastic bottles using three different materials for hydraulic conductors, in order to compare these efficiences and analyze material which has the best cost-benefit in this type of application. The materials analyzed in this study were copper, aluminum and PVC. For this analysis were assembled three alike solar heaters using each one of these materials, and were done several series of measurements of the temperature water output to each heat with flow between 10 and 30 liters per hour. With these data we can analyze the yield and the performance of copper, aluminum and PVC in this application. So we can conclude that aluminum has a higher efficiency, followed by PVC, and the copper had the lowest efficiency. This behavior kept for all values of flow rates examined

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The crescent increasing demand of the electric power in Brazil has stimulated the implantation of Small Central Hydroelectric Power (SCHP) in several regions of the country. However, the silting up of the reservoirs is one of the main problems faced by hydroelectric power plants and SCHP. In this context, this research aimed evaluate the phenomenology and propose the enforcement of appropriate bioengineering techniques to control the intense erosive process of the hydrographical basin of the “Alto Rio Sucuriú,” that cause silting up of the reservoirs of the SCHP Costa Rica, located in the municipal district of Costa Rica (MS). In order to identify the phenomenology of the main falling in of this basin, a diagnosis of the conditions of the physical environment of the region (climate, geology, pedology, hydrology, and use of the ground) was realized. A surveying was also realized to specify the geometric feature of the falling in using the Total Station of the Ruide brand, series RTS 860R and the geodetic GPS of the Ashtech brand and the data obtained was used on the preparation of the Digital Elevation Model (DEM) of the falling in. Based on this diagnosis an official register of the falling in was done with identification of the different types of present erosion. Due to the advanced erosive stage of the falling in researched, the use of bioengineering techniques could be the best solution considering that the traditional engineering techniques make use of heavy material like concrete, iron and large machines that besides causing higher impact to the natural and esthetic aspects of the environment also require a higher investment of capital. This research establish a great cooperation to the knowledge of the erosive process and of the rehabilitation of the degraded areas with application of bioengineering techniques not only hydrographical basin of “Alto Rio Sucuriú” but also to other basins that show similar situation

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Atualmente a China é um ator essencial do cenário econômico mundial, sendo também um grande demandante de matérias primas para manter seu acelerado crescimento, resultando assim em importante e estratégico para a região latinoamericana, sobretudo, por ser um grande comprador. Por sua importância econômica, estratégica e demográfica a China se destaca em relação à maioria dos países do mundo sendo não apenas um ator chave, responsável por grandes mudanças ocorridas no nível e estrutura da demanda mundial, mas também importante fonte de recursos financeiros para manter os equilíbrios internacionais. Através da discussão das relações de comércio entre Brasil e China buscamos analisar os principais resultados em termos econômicos e sociais, principalmente a atuação do Brasil enquanto ator global dado sua importância crescente na dinâmica mundial. A intenção desta pesquisa é entender as dimensões da relação com o país asiático, a partir do posicionamento do Brasil como um dos principais parceiros comerciais de China, sobretudo como exportador de produtos primários. Em termos de exportações realizadas por setores desde o Brasil para a China existe uma grande concentração nos recursos naturais de matérias primas, particularmente os minérios, alimentos, e combustíveis; trata-se de um pequeno hall de produtos com baixo nível de processamento

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This paper work has as objective the study and forecasting of the demand behavior for the European commercial aviation industry. Once economy and demand has a straight relationship, the tool chosen to perform this forecast was the Econometry. In order to get a more efficient forecast, a complete analysis of the environment in which the aviation sector is, to understand all factors with influence over the market as a whole. Only then, the variables which would be tested for the correlation with the demand were picked. The final results of this study has achieved all objectives set and has given a better view over the European Commercial Aviation Market

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A intervenção psicológica na prática esportiva pode ser realizada através de determinados programas psicológicos de treinamento assim como através de aconselhamento e acompanhamento. As metas principais que podem ser alcançadas através de medidas psicológicas de treinamento são a melhoria planejada e sistemática das capacidades e habilidades psíquicas individuais do rendimento, estabilização e otimização do comportamento na competição e aceleração e otimização de processos de regeneração psicológica. A lesão no esporte tem sido alvo de atenção da psicologia do esporte, em função do número crescente de atletas lesionados, influenciados pela alta exigência do esporte de rendimento, bem como do desejo humano de cada vez querer ir além. Essa demanda máxima em busca do rendimento durante as competições juntamente com o aumento das cargas de trabalho durante os treinamentos ajudam a produzir um progressivo crescimento no número de lesões. Participaram desta pesquisa quinze atletas de futebol, sexo masculino, sendo dez atletas da categoria profissional, um atleta da categoria sub-20 e quatro atletas da categoria sub-17. Eles se encontravam lesionados ou em fase inicial de retorno às atividades, da cidade de Limeira, interior do Estado de São Paulo. A pesquisa, de vertente qualitativa, utilizou-se de um questionário subjetivo (Apêndice) contendo perguntas relacionadas à atual lesão do atleta e também a recuperação fisioterápica e psicológica; para análise dos dados foram feitas leituras e propostas de aglutinação de elementos, por categorização da amostra. A ausência de um psicólogo, em especial do esporte nas equipes, no programa de reabilitação dos atletas entrevistados, fez com que não houvesse a implementação de técnicas de atendimento psicológico, tais como as de visualização...(Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The increasing demand for devices for solid state applications in many technological areas has resulted in a high demand for new materials. Among these material have the advantage of being manufactured with different chemical compositions, and may have physical properties equal to or higher than the corresponding crystalline material. The aim of this paper was to produce borate glass system 50B2O3 – 15CuO – 20Li2O – 15X (X = Na2O, K2O, RbCl e Cs2O) to analyze the influence of the atomic radius of alkali in the physical properties of this glass system. The glasses were synthesized by the process of melting and molding. The characteristic temperatures were determined by the technique of scanning calorimetry (DSC). The non-crystalline was determined by x-ray diffraction. In order to determine the molar volume a density measurement by using the Archimedes method was used. The structural characterization was carried out using the technique of infrared spectroscopy

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The growing demand for electricity in Brazil has stimulated the implementation of Small Hydro Power (PCH) in various regions of the country. However, the silting of reservoirs is a major problem faced by power plants and power plants. In this context, this study aimed to evaluate the data hydrosedimentological strategic points of the watershed of the Alto Rio Sucuriú (MS) to identify the possible causes siltation of the reservoir PCH Costa Rica and suggest mitigation measures. Hydrosedimentological surveys were conducted during the rainy season (February / March 2012) and drought (August 2012), and obtained data flow, discharge liquid, suspended solids and bottom and organic matter content. Based on these results it was determined that the points 2, 4, 7 and 9 are the largest contributors to sedimentation, and point 4 got most liquid discharge (38,20 m3s-1), point 7 largest discharge of solid suspension (906,3 mg L-1), points 2 and 4 major discharges solid totals (231,59 t dia-1 and 238,185 t dia-1 respectively) and point 9 higher organic matter content (22,18%) . Found greater fraction of fine sand and very fine suspended solids and solid medium sand in the background. As mitigation measures for the process of silting of the reservoir PCH Costa Rica (MS) highlights the orientation of landowners in adopting conservation measures and planting of leguminous species native to the region in symbiosis with nitrogen-fixing bacteria

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Companies, in general, operate due to the work of its subsystems and this is possible thanks to operational planning that tries to promote the best way to integrate them without giving up the mission, vision and values of the company. The main purpose of a business is to serve customers, but to be successful must take into account other factors such as survival, profitability, growth and operational standpoint to use their resources effectively. The use of tools to support the process of analysis of management decision-making is gaining importance in the context of competitiveness in the world market. The objective of this paper is to present a simulation of the process of forecasting demand to obtain optimal results for a steel company, compare the actual results with order entry and assess the magnitude of the error

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Worldwide, growth is seen in the elderly population, which has prompted the use oftechnologies of care that include all stages of life and for that use, it is necessary toprepare professionals to meet this growing demand population. This work aims to understand how old people feel by their condition and identify how old people perceive this treatment in the Family Health Unit. The research is characterized asqualitative and Minayo second analysis was used Bardin. After, thematicinterviews, it was possible to appreciate the topics: Good, dissatisfaction through the life and likes / dislikes of the service unit. This work can be seen that the elderlywho were well, allied to good living with this family, with spouses, autonomy, respect they encounter in society. And when compared with those who have a complaint, we find that lack of family and age restrictions and diseases are the main complaints

Relevância:

20.00% 20.00%

Publicador:

Resumo:

With the growing world energy demand mainly from developing countries like Brazil, Russia, India and China, the search for efficient sources of energy becomes a challenge for the coming years. Among the most widely used alternative sources, biomass is the one that grows in a more pronounced way. This study will assess the real possibility of having it as a heat source in an Organic Rankine Cycle, which employ heat transfer fluids as working fluids instead of water. From a regional data collection in agricultural production and their potential rice production and the resulting husk was defined as more appropriate. The availability of husks together with an amount of eucalyptus wood, provided by a company in the region on a monthly basis, were analyzed, and the low participation of the wood was discarded by the thermal contribution of little significance. Based on this, it was established the calorific value of fuel for thermodynamic calculations and the cycle to be used. It was then carried out the choice of working fluid from the literature and their availability in the library of software used for the simulations, the Engineering Equation Solver - ESS. The fluid most appropriate for the burning of biomass, Octamethyltrisiloxane (OMTS), was not included in the software and so the R227ea and R134a were selected. After the initial parameters modeling definition, as condensing temperature, efficiency and live steam conditions, the simulations were performed, and only the R227ea remained within the feasible thermodynamic and technological ranges. With this fluid the turbine power output was 265.7 [kW] for a scenario of 24 hours/day burning, 800.3 [kW] to biomass burning for 8 hours/day and 2134 [kW] for burning only 3 hours/day. The thermal efficiency of the cycle remained in the range of 6%, and for plants operating with the most... (Complete Abstract click eletronic access below)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A simulação de tendências futuras no setor de fertilizantes encaminha o produtor rural a prevenir-se de bruscas variações de preços, possibilitando maior poder de concorrência no cenário internacional. Para tanto, propõe-se a utilização da metodologia ARIMA para se estimar a demanda do consumo de fertilizantes no Brasil. Primeiramente revisitando a literatura especializada, obtendo informações históricas relevantes, além de avaliar as vicissitudes do cenário atual. A segunda parte introduz os conceitos da metodologia ARIMA , e encerrando com a apresentação dos dados e análises estatísticas da previsão 2012 à 2016

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The increasing demand for electro-electronic devices, with high performance and multi-functional and the rapid advances of the nanotechnology require the development of new methods and techniques for the production and characterization of nanostructure materials and phenomenological models to describe/to predict some of its properties. The demand for multifunctionality requires, at least, new materials, that can integrate ferroelectric and magnetic properties of high technological interest. Inside of this context, multiferroics material can be considered suitable to integrate two or more physical properties of high technological interest. It can also provides new challenges in the processes of synthesis of new materials, and development of new devices with controlling and simulation of its physical properties and modeling. For this Calcium (Ca)-doped bismuth ferrite (BiFeO3) thin films prepared by using the polymeric precursor method (PPM) were characterized by X-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM), transmission electron microscopy (TEM), polarization and piezoelectric measurements.In order to study the behavior and determine which are the most important parameters to achieve the optimal property to be applied to a multiferroic materials