730 resultados para Decomposition (Mathematics)
Resumo:
Spectral decomposition has rarely been used to investigate complex networks. In this work we apply this concept in order to define two kinds of link-directed attacks while quantifying their respective effects on the topology. Several other kinds of more traditional attacks are also adopted and compared. These attacks had substantially diverse effects, depending on each specific network (models and real-world structures). It is also shown that the spectrally based attacks have special effects in affecting the transitivity of the networks.
Resumo:
We examined the effects of soil mesofauna and the litter decomposition environment (above and belowground) on leaf decomposition rates in three forest types in southeastern Brazil. To estimate decomposition experimentally, we used litterbags with a standard substrate in a full-factorial experimental design. We used model selection to compare three decomposition models and also to infer the importance of forest type, decomposition environment, mesofauna, and their interactions on the decomposition process. Rather than the frequently used simple and double-exponential models, the best model to describe our dataset was the exponential deceleration model, which assumed a single organic compartment with an exponential decrease of the decomposition rate. Decomposition was higher in the wet than in the seasonal forest, and the differences between forest types were stronger aboveground. Regarding litter decomposition environment, decomposition was predominantly higher below than aboveground, but the magnitude of this effect was higher in the seasonal than in wet forests. Mesofauna exclusion treatments had slower decomposition, except aboveground into the Semi-deciduous Forest, where the mesofauna presence did not affect decomposition. Furthermore, the effect of mesofauna was stronger in the wet forests and belowground. Overall, our results suggest that, in a regional scale, both decomposers activity and the positive effect of soil mesofauna in decomposition are constrained by abiotic factors, such as moisture conditions.
Resumo:
This study investigates two lanthanide compounds (La(3+) and Sm(3+)) obtained in water/ethyl alcohol solutions employing the anionic surfactant diphenyl-4-amine sulfonate (DAS) as ligand. Both sulfonates were characterized through IR, TG/DTG (O(2) and N(2)). The thermal treatment of both compounds at 1273 K under air leaves residues containing variable percentages of lanthanide oxysulfide/oxysulfate phases shown by synchrotron high-resolution XRD pattern including the Rietveld analysis. The phase distributions found in the residues evidence the differences in the relative stability of the precursors.
Resumo:
In this paper, a general scheme for generating extra cuts during the execution of a Benders decomposition algorithm is presented. These cuts are based on feasible and infeasible master problem solutions generated by means of a heuristic. This article includes general guidelines and a case study with a fixed charge network design problem. Computational tests with instances of this problem show the efficiency of the strategy. The most important aspect of the proposed ideas is their generality, which allows them to be used in virtually any Benders decomposition implementation.
Resumo:
This work aimed to develop plurimetallic electrocatalysts composed of Pt, Ru, Ni, and Sn supported on C by decomposition of polymeric precursors (DPP), at a constant metal:carbon ratio of 40:60 wt.%, for application in direct ethanol fuel cell (DEFC). The obtained nanoparticles were physico-chemically characterized by X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX). XRD results revealed a face-centered cubic crystalline Pt with evidence that Ni, Ru, and Sn atoms were incorporated into the Pt structure. Electrochemical characterization of the nanoparticles was accomplished by cyclic voltammetry (CV) and chronoamperometry (CA) in slightly acidic medium (0.05 mol L-1 H2SO4), in the absence and presence of ethanol. Addition of Sn to PtRuNi/C catalysts significantly shifted the ethanol and CO onset potentials toward lower values, thus increasing the catalytic activity, especially for the quaternary composition Pt64Sn15Ru13Ni8/C. Electrolysis of ethanol solutions at 0.4 V vs. RHE allowed determination of acetaldehyde and acetic acid as the main reaction products. The presence of Ru in alloys promoted formation of acetic acid as the main product of ethanol oxidation. The Pt64Sn15Ru13Ni8/C catalyst displayed the best performance for DEFC.
Resumo:
[EN] Background: The paradox of health refers to the improvement in objective measures of health and the increase in the reported prevalence of chronic conditions. The objective of this paper is to test the paradox of health in Catalonia from 1994 to 2006. Methods: Longitudinal cross-sectional study using the Catalonia Health Interview Survey of 1994 and 2006. The approach used was the three-fold Blinder - Oaxaca decomposition, separating the part of the differential in mean visual analogue scale value (VAS) due to group differences in the predictors (prevalence effect), due to differences in the coefficients (severity effect), and an interaction term. Variables included were the VAS value, education level, labour status, marital status, all common chronic conditions over the two cross-sections, and a variable for non-common chronic conditions and other conditions. Sample weights have been applied. Results: Results show that there is an increase in mean VAS for men aged 15-44, and a decrease in mean VAS for women aged 65-74 and 75 and more. The increase in mean VAS for men aged 15-44 could be explained by a decrease in the severity effect, which offsets the increase in the prevalence effect. The decrease in mean VAS for women aged 65-74 and 75 and more could be explained by an increase in the prevalence effect, which does not offset the decrease in the severity effect. Conclusions: The results of the present analysis corroborate the paradox of health hypothesis for the population of Catalonia, and highlight the need to be careful when measuring population health over time, as well as their usefulness to detect population's perceptions.
Resumo:
In this thesis, numerical methods aiming at determining the eigenfunctions, their adjoint and the corresponding eigenvalues of the two-group neutron diffusion equations representing any heterogeneous system are investigated. First, the classical power iteration method is modified so that the calculation of modes higher than the fundamental mode is possible. Thereafter, the Explicitly-Restarted Arnoldi method, belonging to the class of Krylov subspace methods, is touched upon. Although the modified power iteration method is a computationally-expensive algorithm, its main advantage is its robustness, i.e. the method always converges to the desired eigenfunctions without any need from the user to set up any parameter in the algorithm. On the other hand, the Arnoldi method, which requires some parameters to be defined by the user, is a very efficient method for calculating eigenfunctions of large sparse system of equations with a minimum computational effort. These methods are thereafter used for off-line analysis of the stability of Boiling Water Reactors. Since several oscillation modes are usually excited (global and regional oscillations) when unstable conditions are encountered, the characterization of the stability of the reactor using for instance the Decay Ratio as a stability indicator might be difficult if the contribution from each of the modes are not separated from each other. Such a modal decomposition is applied to a stability test performed at the Swedish Ringhals-1 unit in September 2002, after the use of the Arnoldi method for pre-calculating the different eigenmodes of the neutron flux throughout the reactor. The modal decomposition clearly demonstrates the excitation of both the global and regional oscillations. Furthermore, such oscillations are found to be intermittent with a time-varying phase shift between the first and second azimuthal modes.
Resumo:
[EN]A natural generalization of the classical Moore-Penrose inverse is presented. The so-called S-Moore-Penrose inverse of a m x n complex matrix A, denoted by As, is defined for any linear subspace S of the matrix vector space Cnxm. The S-Moore-Penrose inverse As is characterized using either the singular value decomposition or (for the nonsingular square case) the orthogonal complements with respect to the Frobenius inner product. These results are applied to the preconditioning of linear systems based on Frobenius norm minimization and to the linearly constrained linear least squares problem.
Resumo:
[EN]Applying a CLIL methodological approach marks a shift in emphasis from language learning based on linguistic form and grammatical progression to a more ‘language acquisition’ one which takes account language functions. In this article we will study the elements of the “language of instruction” of the area of Maths in Secondary Education, by focusing on the analysis of the communicative functions, and the lexical and the cultural items present in the textbook in use. Our aim is to present the CLIL teacher with the linguistic and didactic implications that he or she should take into consideration when implementing the bilingual syllabuses with their students. In order to do that, we will present our conclusions emphasizing the need for coordination in different content areas, linguistic and communicative contents, between the foreign language teacher and the CLIL subject one.
Resumo:
Die protokollbasierte Medizin stellt einen interdisziplinären Brennpunkt der Informatik dar. Als besonderer Ausschnitt der medizinischen Teilgebiete erlaubt sie die relativ formale Spezifikation von Prozessen in den drei Bereichen der Prävention, Diagnose und Therapie.Letzterer wurde immer besonders fokussiert und gilt seit jeher im Rahmen klinischer Studien als Projektionsfläche für informationstechnologische Konzepte. Die Euphorie der frühen Jahre ernüchtert sich jedoch bei jeder Bilanz. Nur sehr wenige der unzählbaren Projekte haben ihre Routine in der alltäglichen Praxis gefunden. Die meisten Vorhaben sind an der Illusion der vollständigen Berechenbarkeit medizinischer Arbeitsabläufe gescheitert. Die traditionelle Sichtweise der klinischen Praxis beruht auf einer blockorientierten Vorstellung des Therapieausführungsprozesses. Sie entsteht durch seine Zerlegung in einzelne Therapiezweige, welche aus vordefinierten Blöcken zusammengesetzt sind. Diese können sequentiell oder parallel ausgeführt werden und sind selbst zusammengesetzt aus jeweils einer Menge von Elementen,welche die Aktivitäten der untersten Ebene darstellen. Das blockorientierte Aufbaumodell wird ergänzt durch ein regelorientiertes Ablaufmodell. Ein komplexes Regelwerk bestimmt Bedingungen für die zeitlichen und logischen Abhängigkeiten der Blöcke, deren Anordnung durch den Ausführungsprozeß gebildet wird. Die Modellierung der Therapieausführung steht zunächst vor der grundsätzlichen Frage, inwieweit die traditionelle Sichtweise für eine interne Repräsentation geeignet ist. Das übergeordnete Ziel besteht in der Integration der unterschiedlichen Ebenen der Therapiespezifikation. Dazu gehört nicht nur die strukturelle Komponente, sondern vorallem die Ablaufkomponente. Ein geeignetes Regelmodell ist erforderlich, welches den spezifischen Bedürfnissen der Therapieüberwachung gerecht wird. Die zentrale Aufgabe besteht darin, diese unterschiedlichen Ebenen zusammenzuführen. Eine sinnvolle Alternative zur traditionellen Sichtweise liefert das zustandsorientierte Modell des Therapieausführungsprozesses. Das zustandsorientierte Modell beruht auf der Sichtweise, daß der gesamte Therapieausführungsprozeß letztendlich eine lineare Folge von Zuständen beschreibt, wobei jeder Zustandsübergang durch ein Ereignis eingeleitet wird, an bestimmte Bedingungen geknüpft ist und bestimmte Aktionen auslösen kann. Die Parallelität des blockorientierten Modells tritt in den Hintergrund, denn die Menge der durchzuführenden Maßnahmen sind lediglich Eigenschaften der Zustände und keine strukturellen Elemente der Ablaufspezifikation. Zu jedem Zeitpunkt ist genau ein Zustand aktiv, und er repräsentiert eine von endlich vielen klinischen Situationen, mit all ihren spezifischen Aktivitäten und Ausführungsregeln. Die Vorteile des zustandsorientierten Modells liegen in der Integration. Die Grundstruktur verbindet die statische Darstellung der möglichen Phasenanordnungen mit der dynamischen Ausführung aktiver Regeln. Die ursprünglichen Inhalte des blockorientierten Modells werden als gewöhnliche Eigenschaften der Zustände reproduziert und stellen damit nur einen Spezialfall der zustandsbezogenen Sicht dar.Weitere Möglichkeiten für die Anreicherung der Zustände mit zusätzlichen Details sind denkbar wie sinnvoll. Die Grundstruktur bleibt bei jeder Erweiterung jedoch die gleiche. Es ergibt sich ein wiederverwendbares Grundgerüst,ein gemeinsamer Nenner für die Erfüllung der Überwachungsaufgabe.