3D Face Reconstruction from 2D Pictures: First Results of a Web-Based Computer Aided System for Aesthetic Procedures

The human face is a vital component of our identity and many people undergo medical aesthetics procedures in order to achieve an ideal or desired look. However, communication between physician and patient is fundamental to understand the patient’s wishes and to achieve the desired results. To date, most plastic surgeons rely on either “free hand” 2D drawings on picture printouts or computerized picture morphing. Alternatively, hardware dependent solutions allow facial shapes to be created and planned in 3D, but they are usually expensive or complex to handle. To offer a simple and hardware independent solution, we propose a web-based application that uses 3 standard 2D pictures to create a 3D representation of the patient’s face on which facial aesthetic procedures such as filling, skin clearing or rejuvenation, and rhinoplasty are planned in 3D. The proposed application couples a set of well-established methods together in a novel manner to optimize 3D reconstructions for clinical use. Face reconstructions performed with the application were evaluated by two plastic surgeons and also compared to ground truth data. Results showed the application can provide accurate 3D face representations to be used in clinics (within an average of 2 mm error) in less than 5 min.

Randomized comparisons among health informatics students identify hypertutorial features as improving web-based instruction.

Hypertutorials optimize five features - presentation, learner control, practice, feedback, and elaborative learning resources. Previous research showed graduate students significantly and overwhelmingly preferred Web-based hypertutorials to conventional "Book-on-the-Web" statistics or research design lessons. The current report shows that the source of hypertutorials' superiority in student evaluations of instruction lies in their hypertutorial features. Randomized comparisons between the two methodologies were conducted in two successive iterations of a graduate level health informatics research design and evaluation course. The two versions contained the same text and graphics, but differed in the presence or absence of hypertutorial features: Elaborative learning resources, practice, feedback, and amount of learner control. Students gave high evaluations to both Web-based methodologies, but consistently rated the hypertutorial lessons as superior. Significant differences localized in the hypertutorial subscale that measured student responses to hypertutorial features.

Social skills as predictors of communication, performance and quality of collaboration in project-based learning

The assumption that social skills are necessary ingredients of collaborative learning is well established but rarely empirically tested. In addition, most theories on collaborative learning focus on social skills only at the personal level, while the social skill configurations within a learning group might be of equal importance. Using the integrative framework, this study investigates which social skills at the personal level and at the group level are predictive of task-related e-mail communication, satisfaction with performance and perceived quality of collaboration. Data collection took place in a technology-enhanced long-term project-based learning setting for pre-service teachers. For data collection, two questionnaires were used, one at the beginning and one at the end of the learning cycle which lasted 3 months. During the project phase, the e-mail communication between group members was captured as well. The investigation of 60 project groups (N = 155 for the questionnaires; group size: two or three students) and 33 groups for the e-mail communication (N = 83) revealed that personal social skills played only a minor role compared to group level configurations of social skills in predicting satisfaction with performance, perceived quality of collaboration and communication behaviour. Members from groups that showed a high and/or homogeneous configuration of specific social skills (e.g., cooperation/compromising, leadership) usually were more satisfied and saw their group as more efficient than members from groups with a low and/or heterogeneous configuration of skills.

Computer Vision-Based Carbohydrate Estimation for Type 1 Diabetic Patients Using Smartphones

Background: Individuals with type 1 diabetes (T1D) have to count the carbohydrates (CHOs) of their meal to estimate the prandial insulin dose needed to compensate for the meal’s effect on blood glucose levels. CHO counting is very challenging but also crucial, since an error of 20 grams can substantially impair postprandial control. Method: The GoCARB system is a smartphone application designed to support T1D patients with CHO counting of nonpacked foods. In a typical scenario, the user places a reference card next to the dish and acquires 2 images with his/her smartphone. From these images, the plate is detected and the different food items on the plate are automatically segmented and recognized, while their 3D shape is reconstructed. Finally, the food volumes are calculated and the CHO content is estimated by combining the previous results and using the USDA nutritional database. Results: To evaluate the proposed system, a set of 24 multi-food dishes was used. For each dish, 3 pairs of images were taken and for each pair, the system was applied 4 times. The mean absolute percentage error in CHO estimation was 10 ± 12%, which led to a mean absolute error of 6 ± 8 CHO grams for normal-sized dishes. Conclusion: The laboratory experiments demonstrated the feasibility of the GoCARB prototype system since the error was below the initial goal of 20 grams. However, further improvements and evaluation are needed prior launching a system able to meet the inter- and intracultural eating habits.

Biomechanical validation of computer assisted planning of periacetabular osteotomy: A preliminary study based on finite element analysis

Periacetabular Osteotomy (PAO) is a joint preserving surgical intervention intended to increase femoral head coverage and thereby to improve stability in young patients with hip dysplasia. Previously, we developed a CT-based, computer-assisted program for PAO diagnosis and planning, which allows for quantifying the 3D acetabular morphology with parameters such as acetabular version, inclination, lateral center edge (LCE) angle and femoral head coverage ratio (CO). In order to verify the hypothesis that our morphology-based planning strategy can improve biomechanical characteristics of dysplastic hips, we developed a 3D finite element model based on patient-specific geometry to predict cartilage contact stress change before and after morphology-based planning. Our experimental results demonstrated that the morphology-based planning strategy could reduce cartilage contact pressures and at the same time increase contact areas. In conclusion, our computer-assisted system is an efficient tool for PAO planning.

Object-Based Customization of Learning Content: Potentials and Pitfalls

Specification consortia and standardization bodies concentrate on e-Learning objects to en-sure reusability of content. Learning objects may be collected in a library and used for deriv-ing course offerings that are customized to the needs of different learning communities. How-ever, customization of courses is possible only if the logical dependencies between the learn-ing objects are known. Metadata for describing object relationships have been proposed in several e-Learning specifications. This paper discusses the customization potential of e-Learning objects but also the pitfalls that exist if content is customized inappropriately.

The Church Music Program: The Effect of Moving from Performance-based to Education-based Emphasis in a Church Music Program

This research project sought to answer the primary research question: What occurs when the music program in a church changes its emphasis from performance to education? This qualitative study of a church choir included participant observation of Wednesday evening and Sunday morning rehearsals over a 12 week period, individual interviews, group interviews, written responses, and written and visual assessment of musical skills. The goal was a rich description of the participants and emerging themes resulting from the shift in emphasis. Analysis of data occurred through inductive processing. Data was initially coded and then the codes were categorized into sub-themes, and finally into major themes. Early analysis of the data began with reflection in a researcher journal. Following the completion of the study the journal was entered into a word processor, as were transcriptions of videotaped rehearsals, and written reflections from the participants. After all data had been reviewed repeatedly and entered into the word processor, it was coded, reexamined, and finally categorized into sub-themes and themes. After coding and identification of major themes and sub-themes the finding were challenged by looking for disconfirming evidence. Finally, after the completion of the analysis stage, member checks were conducted. The results of the analysis of data revealed themes that could be associated either with the choir or the director. The key themes primarily associated with the choir were: Response to the change in rehearsal format; Attitude toward learning; Appropriateness of community learning model; and, Member's perceptions of the results of the program. The key themes associated with the director were identified as: Conductor assuming the role of educator; Conductor recognizing the choir as learners; Conductor treating rehearsals as a time for teaching and learning; and, Conductor's perception of the effectiveness of the change in focus. The study concluded that a change in focus from performance to education did not noticeably improve the sound of the choir after twelve-weeks. There were however, indications that improvements were being made by the individual members. Further study of the effects over a longer period of time is recommended.

Health, education and community: Assets and needs of a small urban community in north east Tamaulipas, Mexico: A community based participatory research assessment

This study explored the health, education, social assets, needs, attitudes, and behaviors of residents of Ferrocarril #4, a small urban community in Tamaulipas, Mexico. A collaborative Participatory Action Research approach was used to emphasize community involvement. Using Triangulation to ensure validity, qualitative methods included key informant in depth interviews, participant observation and participatory discussion groups with women and men. A personal interview with a probability sample of women was done. The median age of interviewees was 37 years. The majority was married or had a partner. Over half of respondents completed grades 6-9. Employed women (25%) earned a median weekly salary equivalent to ∼56 USD. Women with health insurance (67.7%) were covered mainly through Social Security and Seguro Popular. One in 5 reported bad health. Barriers to care were primarily money and transportation. To improve health care, women wanted a full service clinic in or close to the community and affordable health care. Socially, 28% of respondents had no close friends in the community and most did not participate in beneficial community activities. Many women did not socialize with others and help from neighbors was situational. Primary school teachers lacked parental support and it interfered with classroom efforts. Healthy community discussion groups focused on personal and environmental hygiene and safety. Valuable assets exist in the community. To date, collaborative efforts resulted in a school First Aid station, a school nurse visit weekly, posting of emergency contact phone numbers in the school and community center, and development of a student health information form. ^

Symposium for dental treatment of medically complex children: Practice based culminating experience a continuing education course

The purpose of this Continuing Education Course is to provide oral health professionals with information to address the unique dental needs of medically complex children. The objective is to train dentists to treat special needs patients so these children have more access to oral healthcare. ^ Under the auspice of Dell Children Hospital of Austin, Lisa Jacob DDS MS is administering this Continuing Education Course for dentists and dental staff from the 46 counties of central Texas served by the hospital.^ Needs assessment was determined through a survey questionnaire to collect data about the number of special needs patients seen by general dentists in Central Texas.^ In recent years, an increasing number of continuing education courses have been developed to help dentists learn techniques for providing dentistry in more understanding ways to patients with special needs. Dentists and dental staff are trained to provide care specifically in dentistry, regardless of who the patient is. This means dentists can perform a clinical examination, carry out procedures to diagnose and treat oral diseases, and provide restorations such as fillings and crowns. ^ Four prominent speakers will provide an instructional tool to address the need for dentists to increase their competence and comfort level in caring for individuals with developmental disabilities. Each speaker will address one of the most frequently encountered cases of medically complex children. The four topics selected by Dr. Lisa Jacob are Cancer, Mental Disability, Downs Syndrome, and Craniofacial Syndromes.^ The public health implications of this continuing education course are presented in providing dental service to this underserved population. When general dentist turn away patients with special needs because of lack of knowledge to treat them, these patients will, more than likely, postpone or abandon needed dental visits because of difficulties reaching pediatric dentists who may not be available in certain areas.^

A practice-based culminating experience: Writing a HRSA grant application with Texas Organ Sharing Alliance for public education efforts to increase solid organ donation

In November 2010, nearly 110,000 people in the United States were waiting for organs for transplantation. Despite the fact that the organ donor registration rate has doubled in the last year, Texas has the lowest registration rate in the nation. Due to the need for improved registration rates in Texas, this practice-based culminating experience was to write an application for federal funding for the central Texas organ procurement organization, Texas Organ Sharing Alliance. The culminating experience has two levels of significance for public health – (1) to engage in an activity to promote organ donation registration, and (2) to provide professional experience in grant writing. ^ The process began with a literature review. The review was to identify successful intervention activities in motivating organ donation registration that could be used in intervention design for the grant application. Conclusions derived from the literature review included (1) the need to specifically encourage family discussions, (2) religious and community leaders can be leveraged to facilitate organ donation conversations in families, (3) communication content must be culturally sensitive and (4) ethnic disparities in transplantation must be acknowledged and discussed.^ Post the literature review; the experience followed a five step process of developing the grant application. The steps included securing permission to proceed, assembling a project team, creation of a project plan and timeline, writing each element of the grant application including the design of proposed intervention activities, and completion of the federal grant application. ^ After the grant application was written, an evaluation of the grant writing process was conducted. Opportunities for improvement were identified. The first opportunity was the need for better timeline management to allow for review of the application by an independent party, iterative development of the budget proposal, and development of collaborative partnerships. Another improvement opportunity was the management of conflict regarding the design of the intervention that stemmed from marketing versus evidence-based approaches. The most important improvement opportunity was the need to develop a more exhaustive evaluation plan.^ Eight supplementary files are attached to appendices: Feasibility Discussion in Appendix 1, Grant Guidance and Workshop Notes in Appendix 2, Presentation to Texas Organ Sharing Alliance in Appendix 3, Team Recruitment Presentation in Appendix 5, Grant Project Narrative in Appendix 7, Federal Application Form in Appendix 8, and Budget Workbook with Budget Narrative in Appendix 9.^

The use of computers for graduate education in Project Management. Improving the integration to the industry.

This paper presents an initiative for monitoring the competence acquisition by a team of students with different backgrounds facing the experience of being working by projects and in a project. These students are graduated bachelor engineering are inexperienced in the project management field and they play this course on a time-shared manner along with other activities. The goal of this experience is to increase the competence levels acquired by using an structured web based portfolio tool helping to reinforce how relevant different project management approaches can result for final products and how important it becomes to maintain the integration along the project. Monitoring is carried out by means of have a look on how the work is being done and measuring different technical parameters per participant. The use of this information could make possible to bring additional information to the students involved in terms of their individual competencies and the identification of new opportunities of personal improvement. These capabilities are strongly requested by companies in their daily work as well as they can be very convenient too for students when they try to organize their PhD work.

New Methodology for Integrating Teams into Multidisciplinary Project Based Learning

This paper describes the collaboration among students and professors in four different subjects, to develop multidisciplinary projects. The objective is to simulate the conditions in a company environment. A new methodology based on student interaction and content development in a Wiki environment has been developed. The collaborative server created an ‘out of the classroom’ discussion forum for students of different subjects, and allowed them to compile a ‘project work’ portfolio. Students and professors participated with enthusiasm, due to the correct well-distributed work and the easiness of use of the selected platform in which only an internet connected computer is needed to create and to discuss the multidisciplinary projects. Quality of developed projects has been dramatically improved due to integration of results provided from the different teams.

An example of Learning based on competences: Use of Maxima in Linear Algebra for Engineers

This paper analyzes the role of Computer Algebra Systems (CAS) in a model of learning based on competences. The proposal is an e-learning model Linear Algebra course for Engineering, which includes the use of a CAS (Maxima) and focuses on problem solving. A reference model has been taken from the Spanish Open University. The proper use of CAS is defined as an indicator of the generic ompetence: Use of Technology. Additionally, we show that using CAS could help to enhance the following generic competences: Self Learning, Planning and Organization, Communication and Writing, Mathematical and Technical Writing, Information Management and Critical Thinking.