The efficiency of Lutz, Kato-Katz and Baermann-Moraes (adapted) techniques association to the diagnosis of intestinal helmints

The association of Lutz/Kato-Katz and Lutz/Bermann-Moraes (adapted techniques was used to improve better results that ranged from 0.4 to 11 times in the search of eggs of Ascaris lumbricoides, Schistosoma mansoni, Trichiuris trichiura, Taenia sp. and larvae of Strongyloides stercoralis.

Plant tissue culture techniques

Plant cell and tissue culture in a simple fashion refers to techniques which utilize either single plant cells, groups of unorganized cells (callus) or organized tissues or organs put in culture, under controlled sterile conditions.

Computer-assisted placement technique in hip resurfacing arthroplasty: improvement in accuracy?

Freehand positioning of the femoral drill guide is difficult during hip resurfacing and the surgeon is often unsure of the implant position achieved peroperatively. The purpose of this study was to find out whether, by using a navigation system, acetabular and femoral component positioning could be made easier and more precise. Eighteen patients operated on by the same surgeon were matched by sex, age, BMI, diagnosis and ASA score (nine patients with computer assistance, nine with the regular ancillary). Pre-operative planning was done on standard AP and axial radiographs with CT scan views for the computer-assisted operations. The final position of implants was evaluated by the same radiographs for all patients. The follow-up was at least 1 year. No difference between both groups in terms of femoral component position was observed (p > 0.05). There was also no difference in femoral notching. A trend for a better cup position was observed for the navigated hips, especially for cup anteversion. There was no additional operating time for the navigated hips. Hip navigation for resurfacing surgery may allow improved visualisation and hip implant positioning, but its advantage probably will be more obvious with mini-incisions than with regular incision surgery.

Comparative study of human erythrocytes by digital holographic microscopy, confocal microscopy, and impedance volume analyzer.

Red blood cell (RBC) parameters such as morphology, volume, refractive index, and hemoglobin content are of great importance for diagnostic purposes. Existing approaches require complicated calibration procedures and robust cell perturbation. As a result, reference values for normal RBC differ depending on the method used. We present a way for measuring parameters of intact individual RBCs by using digital holographic microscopy (DHM), a new interferometric and label-free technique with nanometric axial sensitivity. The results are compared with values achieved by conventional techniques for RBC of the same donor and previously published figures. A DHM equipped with a laser diode (lambda = 663 nm) was used to record holograms in an off-axis geometry. Measurements of both RBC refractive indices and volumes were achieved via monitoring the quantitative phase map of RBC by means of a sequential perfusion of two isotonic solutions with different refractive indices obtained by the use of Nycodenz (decoupling procedure). Volume of RBCs labeled by membrane dye Dil was analyzed by confocal microscopy. The mean cell volume (MCV), red blood cell distribution width (RDW), and mean cell hemoglobin concentration (MCHC) were also measured with an impedance volume analyzer. DHM yielded RBC refractive index n = 1.418 +/- 0.012, volume 83 +/- 14 fl, MCH = 29.9 pg, and MCHC 362 +/- 40 g/l. Erythrocyte MCV, MCH, and MCHC achieved by an impedance volume analyzer were 82 fl, 28.6 pg, and 349 g/l, respectively. Confocal microscopy yielded 91 +/- 17 fl for RBC volume. In conclusion, DHM in combination with a decoupling procedure allows measuring noninvasively volume, refractive index, and hemoglobin content of single-living RBCs with a high accuracy.

Sistema de monitorització Open Source: projecte d'empresa per Computer Technology Catalunya

L’objectiu del projecte consisteix en l’estudi, simulació i implantació d’un conjunt d’aplicacions que permeten tenir un control sobre possibles problemes que puguin succeir a la nostra xarxa. Aquest projecte és la solució als problemes de detecció d’errors en el funcionament de les infraestructures de networking de les que disposen els nostres clients.

Indications et techniques actuelles de reconstruction mammaire après mastectomie [Indications and techniques of reconstruction after mastectomy].

Reconstructive surgery takes an important place in breast cancer treatment. Immediate breast reconstruction is performed during the same operation as mastectomy. It is contraindicated following radiotherapy. Reconstruction performed after mastectomy is called differed breast reconstruction. It is completed 6 months after chemotherapy and 1 year after radiotherapy. Prosthetic breast reconstruction is indicated when tissues are of good qualities and breast are small. Autologous reconstruction is performed in case of radiotherapy or large breast. After breast reconstruction, imperfections can be corrected with autologous fat injection.

A programme for computer aided identification of Phlebotomine sandflies of the Americas (CIPA): presentation and check-list of American species

The CIPA programme is a collaborative project including two entomologists from France and seven South and Central America countries. Its objective is the development of an expert system for computer aided identification of phlebotomine sandflies from the Americas. It also includes the formation of data bases for bibliographic, taxonomic and biogeographic data. Participant consensus on taxonomic prerequisites, standardization in bibliographic data collections and selection of descriptive variables for the final programme has been established through continous communication among participants and annual meetings. The adopted check-list of American sandflies presented here includes 386 specific taxa, ordered into genera and 28 sub-genera or species groups.

Techniques for analytical testing of unconventional samples.

Forensic scientists have long detected the presence of drugs and their metabolites in biological materials using body fluids such as urine, blood and/or other biological liquids or tissues. For doping analysis, only urine has so far been collected. In recent years, remarkable advances in sensitive analytical techniques have encouraged the analysis of drugs in unconventional biological samples such as hair, saliva and sweat. These samples are easily collected, although drug levels are often lower than the corresponding levels in urine or blood. This chapter reviews recent studies in the detection of doping agents in hair, saliva and sweat. Sampling, analytical procedures and interpretation of the results are discussed in comparison with those obtained from urine and blood samples.

Mejorando la robustez de aplicaciones frente a fallos transitorios

Computer chips implementation technologies evolving to obtain more performance are increasing the probability of transient faults. As this probability grows and on-chip solutions are expensive or tend to degrade processor performance, the efforts to deal with these transient faults in higher levels (such as the operating system or even at the application level) are increasing. Mostly, these efforts are trying to avoid silent data corruptions using hardware, software and hybrid based techniques to add redundancy to detect the errors generated by the transient faults. This work presents our proposal to improve the robustness of applications with source code based transformation adding redundancy. Also, our proposal takes account of the tradeoff between the improved robustness and the overhead generated by the added redundancy.

Projecte pilot d'innovació docent de l'assignatura Estructura de Computadors I

L'objectiu del projecte ha estat la millora de la qualitat docent de l'assignatura Estructura de Computadors I, impartida a la Facultat d'Informàtica de Barcelona (UPC) dins els estudis d'Enginyeria Informàtica, Enginyeria Tècnica en Informàtica de Sistemes i Enginyeria Tècnica en Informàtica de Gestió. S'ha treballat en quatre línies d'actuació: (i) aplicació de tècniques d'aprenentatge actiu a les classes; (ii) aplicació de tècniques d'aprenentage cooperatiu no presencials; (iii) implantació de noves TIC i adaptació de les ja emprades per tal d'habilitar mecanismes d'autoavaluació i de realimentació de la informació referent a l'avaluació; i (iv) difusió de les experiències derivades de les diferents actuacions. Referent a les dues primeres mesures s'avalua l'impacte de metodologies docents que afavoreixen l'aprenentatge actiu tant de forma presencial com no presencial, obtenint-se clares millores en el rendiment respecte a altres metodologies utilitzades anteriorment enfocades a la realització de classes del tipus magistral, en què únicament es posa a l'abast dels alumnes la documentació de l'assignatura per a què puguin treballar de forma responsable. Les noves metodologies fan especial èmfasi en el treball en grup a classe i la compartició de les experiències fora de classe a través de fòrums de participació. La mesura que ha requerit més esforç en aquest projecte és la tercera, amb el desenvolupament d'un entorn d'interfície web orientat a la correcció automàtica de programes escrits en llenguatge assemblador. Aquest entorn permet l'autoavaluació per part dels alumnes dels exercicis realitzats a l'assignatura, amb obtenció d'informació detallada sobre les errades comeses. El treball realitzat dins d'aquest projecte s'ha publicat en congressos rellevants en l'àrea docent tant a nivell estatal com internacional. El codi font de l'entorn esmentat anteriorment es posa a disposició pública a través d'un enllaç a la web.

Laboratori Assistit per Ordinador mitjançant eines ofimàtiques convencionals

El projecte "Laboratori Asssit per Ordinador Mitjançant Eines Ofimàtiques Convencionals" ha estat realitzat en la facultat de Física de la Universitat de Barcelona durant els anys 2007 i 2008 (projecte biennal). El principal objectiu d’aquest projecte és demostrar la possibilitat d’utilitzar les eines informàtiques més habituals en la realització d’experiències de laboratori assistit per ordinador (LAO). En particular, es proposa la utilització del Excel © juntament amb les seves macros (Visual Basic para Aplicacions, VBA) en pràctiques de laboratori d’assignatures en l’àrea de Física Aplicada. Excel és un full de càlcul molt conegut i usat tant per professors com pels estudiants. En aquest treball mostrem exemples concrets que abasten les diferents tècniques de control i adquisició de dades: programació del port sèrie (RS- 232) i paral·lel, i interfase GPIB. La implementació d’aquestes tècniques es realitza mitjançant macros VBA de Excel. La resta de programació de l’aplicació LAO, la representació gràfica i el tractament de les dades, es realitza de forma molt simple a partir del maneig habitual d’un full de càlcul. La realització del projecte ha demostrat la conveniència d’aquesta metodologia. Actualment pràcticament la totalitat de les pràctiques LAO de les quals és responsable el Departament de Física Aplicada utilitzen la programació a través del full de càlcul. La resposta dels estudiants ha estat molt positiva. La combinació de les característiques d’aquesta eina juntament amb la programació VBA té un enorme potencial i representa, probablement, una forma senzilla d’introduir tant a l’alumne com al professor en el món de la programació.

Comparison of Some Molecular-genetic Techniques for Identification of Leishmania Circulating in Natural Foci of Zoonotic Cutaneous Leishmaniasis in the Central Asia Region

Different molecular-genetic methods were used to identify a cohort of Leishmania strains from natural foci of zoonotic cutaneous leishmaniasis located in Central Asia, on the former USSR territory. The results obtained using isoenzymes, PCR, restriction fragment length polymorphisms of kDNA and molecular hybridization techniques are discussed in terms of their applicability, discrimination power and feasibility for answering questions related to molecular epidemiological research and for detecting mixed Leishmania infections

Neuroimaging techniques in Alzheimer's disease

Neuroimaging techniques provide valuable tools for diagnosing Alzheimer's disease (AD), monitoring disease progression and evaluating responses to treatment. There is currently a wide array of techniques available including computed tomography (CT), magnetic resonance imaging (MRI), positron emission tomography (PET), and, for recording electrical brain activity, electroencephalography (EEG). The choice of technique depends on the contrast between tissues of interest, spatial resolution, temporal resolution, requirements for functional data and the probable number of scans required. For example, while PET, CT and MRI can be used to differentiate between AD and other dementias, MRI is safer and provides better contrast of soft tissues. Neuroimaging is a technique spanning many disciplines and requires effective communication between doctors requesting a scan of a patient or group of patients and those with technical expertise. Consideration and discussion of the most suitable type of scan and the necessary settings to achieve the best results will help ensure appropriate techniques are chosen and used effectively. Neuroimaging techniques are currently expanding understanding of the structural and functional changes that occur in dementia. Further research may allow identification of early neurological signs ofAD, before clinical symptoms are evident, providing the opportunity to test preventative therapies. CombiningMRI and machine learning techniques may be a powerful approach to improve diagnosis ofAD and to predict clinical outcomes.