Gottschalk children at swim club forming a pyramid; Hannover, Germany.

Seated on grass Kurt Godshaw; left to right Walter, Freddy, Ursula; seated on ball Hal Godshaw

Oikein, nurin - miten Suomessa kudin : Tutkimus neulonnan työotteista.

The aim of this work was to study what kind of working grips people use to knit in Finland and decide if one grip is superior to others. I investigated how knitters have adopted their grips and how they experience their knitting. I also explored whether it is possible to change one's grip. To provide a theoretical basis for the research I observed knitting in terms of culture, skill and ergonomics. The first part of the study material comprised video recordings of the grips of 95 knitters together with background information collected via a questionnaire during the education of craft teachers at the University of Helsinki in spring 2004, 2005 and 2006. Using the data obtained I focused on three knitters, whose grip of the knitting needles clearly differed from the ergonomically good grip. In addition to them I interviewed one student, who had changed over to more ergonomic way of knitting after participating in the first part of this study. In this respect my study is a several events' case study. In order to analyse my data I used both qualitative and quantitative content analysis methods to complement each other. Most of my research participants had learned to knit in first years of elementary school or comprehensive school. Almost everyone had adopted the basics of knitting by imitating, and many of them had corrected "incorrect" positions from verbal instructions. Through practice the imitated position had gradually become the style unique to each knitter. The findings showed that students' background in knitting is quite varied due to the diverse level of craft teaching. This is reflected in their knitting grips and their interest in knitting. Students do not think that there is one right working grip. The most important thing is that working seems as fluent and relaxed as possible, at which point knitting is easy and flows freely. They often consider their own style so pleasing and well-functioning that they do not think there could be any room for improvement. This study pointed out that, while it is possible to change a knitter's working grip, there is a bigger challenge in acknowledging weaknesses in one's know how. According to the results of my research, the most common working grip among Finnish knitters' corresponds with the grip that has been described as ergonomically good. Over one third of all participants knitted this way. Hands keep the knitting firmly but without tension. The forefinger that guides the yarn from the ball rests gently against the knitting needle, and the yarn goes in front of the first joint of the forefinger. The position of the hands and loops is the same as in the ergonomically good grip, i.e. the fingertips of both hands and the loops are near the tips of the knitting needles, so that the fingers only have to move small distances. When knitters purl and plain, they commonly pick up the yarn from the back of the knitting needle in the same way as when knitting. While researching the common features of working grips I have learned what abnormal grips are like. Although I recognized many different ways to knit, all the peculiar grips were modifications of the continental way of knitting. The results of this study give a clear picture of those points knitters should focus their attention on in order to gain a good hold of the needles.

An elementary approach to gap theorems

Using elementary comparison geometry, we prove: Let (M, g) be a simply-connected complete Riemannian manifold of dimension >= 3. Suppose that the sectional curvature K satisfies -1-s(r) <= K <= -1, where r denotes distance to a fixed point in M. If lim(r ->infinity) e(2r) s(r) = 0, then (M, g) has to be isometric to H-n.The same proof also yields that if K satisfies -s(r) <= K <= 0 where lim(r ->infinity) r(2) s(r) = 0, then (M, g) is isometric to R-n, a result due to Greene and Wu.Our second result is a local one: Let (M, g) be any Riemannian manifold. For a E R, if K < a on a geodesic ball Bp (R) in M and K = a on partial derivative B-p (R), then K = a on B-p (R).

Size effect on the lattice parameter of KCl during mechanical milling

The size effect on the lattice parameter of ionic KCl nanocrystals was studied systematically during mechanical milling of Pure KCl powder under vacuum. The results suggest anomalous lattice expansion, with the lattice parameter increasing from 6.278 angstrom at d = 6 mu m to 6.30307 angstrom at d = 85 mn. The defects generated during ball milling of KCl and surface stress are deemed to be responsible for this lattice parameter expansion. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Gottschalk children at swim club forming a pyramid; Hannover, Germany.

Seated on grass Kurt Godshaw; left to right Walter, Freddy, Ursula; seated on ball Hal Godshaw

Gottschalk children at swim club forming a pyramid; Hannover, Germany.

Seated on grass Kurt Godshaw; left to right Walter, Freddy, Ursula; seated on ball Hal Godshaw

Using wheat flour in the production of organic banana prawns

Banana prawn (Fenneropenaeus merguiensis) juveniles (1-2 g) were compared for survival, growth and condition after feeding in tanks over one month with several simple diets based on organically certified whole wheat flour. All feeds were applied once per day at 6% of the starting body weight, and produced high survival (>94%). A commercial Australian prawn feed used as the control diet produced the highest (P<0.05) growth (101% weight gain) and condition measured as the length of antennae (13.2 cm). The unfed control had significantly (P<0.05) lower survival (56%), and resulted in a weight loss (3.1%) and the shortest antennae (9.4 cm). Adding free flour to tanks produced lower (P<0.05) growth (6.9%) and shorter (P<0.05) antennae (10.3 cm) than adding pelletised flour with low levels (dry weight) of additional nutritional substances and feed attractants (chicken’s whole egg: 1.5%, polychaete slurry: 1.1% and 6.8%, molasses: 4.2%). Rolling the flour into a dough ball also appeared to marginally improve its direct utilisation by the prawns. These results are considered within the context of appropriate nutrition for Penaeids and successfully producing certified organic prawns in Australia.

Mechanical testing of internal fixation devices: A theoretical and practical examination of current methods

Successful healing of long bone fractures is dependent on the mechanical environment created within the fracture, which in turn is dependent on the fixation strategy. Recent literature reports have suggested that locked plating devices are too stiff to reliably promote healing. However, in vitro testing of these devices has been inconsistent in both method of constraint and reported outcomes, making comparisons between studies and the assessment of construct stiffness problematic. Each of the methods previously used in the literature were assessed for their effect on the bending of the sample and concordant stiffness. The choice of outcome measures used in in vitro fracture studies was also assessed. Mechanical testing was conducted on seven hole locked plated constructs in each method for comparison. Based on the assessment of each method the use of spherical bearings, ball joints or similar is suggested at both ends of the sample. The use of near and far cortex movement was found to be more comprehensive and more accurate than traditional centrally calculated inter fragmentary movement values; stiffness was found to be highly susceptible to the accuracy of deformation measurements and constraint method, and should only be used as a within study comparison method. The reported stiffness values of locked plate constructs from in vitro mechanical testing is highly susceptible to testing constraints and output measures, with many standard techniques overestimating the stiffness of the construct. This raises the need for further investigation into the actual mechanical behaviour within the fracture gap of these devices.

Variability in exposure to ambient ultrafine particles in urban schools: Comparative assessment between Australia and Spain

Ambient ultrafine particle number concentrations (PNC) have inhomogeneous spatio-temporal distributions and depend on a number of different urban factors, including background conditions and distant sources. This paper quantitatively compares exposure to ambient ultrafine particles at urban schools in two cities in developed countries, with high insolation climatic conditions, namely Brisbane (Australia) and Barcelona (Spain). The analysis used comprehensive indoor and outdoor air quality measurements at 25 schools in Brisbane and 39 schools in Barcelona. PNC modes were analysed with respect to ambient temperature, land use and urban characteristics, combined with the measured elemental carbon concentrations, NOx (Brisbane) and NO2 (Barcelona). The trends and modes of the quantified weekday average daily cycles of ambient PNC exhibited significant differences between the two cities. PNC increases were observed during traffic rush hours in both cases. However, the mid-day peak was dominant in Brisbane schools and had the highest contribution to total PNC for both indoors and outdoors. In Barcelona, the contribution from traffic was highest for ambient PNC, while the mid-day peak had a slightly higher contribution for indoor concentrations. Analysis of the relationships between PNC and land use characteristics in Barcelona schools showed a moderate correlation with the percentage of road network area and an anti-correlation with the percentage of green area. No statistically significant correlations were found for Brisbane. Overall, despite many similarities between the two cities, school-based exposure patterns were different. The main source of ambient PNC at schools was shown to be traffic in Barcelona and mid-day new particle formation in Brisbane. The mid-day PNC peak in Brisbane could have been driven by the combined effect of background and meteorological conditions, as well as other local/distant sources. The results have implications for urban development, especially in terms of air quality mitigation and management at schools.

Case study 1: Nursing informatics and eHealth in Australia

There are currently many changes happening in nursing and healthcare in Australia. Healthcare reform has been high on the national government agenda and has created many changes in healthcare including eHealth. Healthcare information technologies and informatics are providing many challenges and excitement for the future of healthcare in Australia. The challenge for professional nursing organisations and nursing leaders of Australia is to be proactive in developments and initiatives for nursing to remain visible and viable in health care systems to safeguard the profession for the future as health care reform is implemented.

Biofuels from food processing wastes

Food processing industry generates substantial high organic wastes along with high energy uses. The recovery of food processing wastes as renewable energy sources represents a sustainable option for the substitution of fossil energy, contributing to the transition of food sector towards a low-carbon economy. This article reviews the latest research progress on biofuel production using food processing wastes. While extensive work on laboratory and pilot-scale biosystems for energy production has been reported, this work presents a review of advances in metabolic pathways, key technical issues and bioengineering outcomes in biofuel production from food processing wastes. Research challenges and further prospects associated with the knowledge advances and technology development of biofuel production are discussed.

Convex-transitive Banach spaces and their hyperplanes

The topic of this dissertation is the geometric and isometric theory of Banach spaces. This work is motivated by the known Banach-Mazur rotation problem, which asks whether each transitive separable Banach space is isometrically a Hilbert space. A Banach space X is said to be transitive if the isometry group of X acts transitively on the unit sphere of X. In fact, some weaker symmetry conditions than transitivity are studied in the dissertation. One such condition is an almost isometric version of transitivity. Another investigated condition is convex-transitivity, which requires that the closed convex hull of the orbit of any point of the unit sphere under the rotation group is the whole unit ball. Following the tradition developed around the rotation problem, some contemporary problems are studied. Namely, we attempt to characterize Hilbert spaces by using convex-transitivity together with the existence of a 1-dimensional bicontractive projection on the space, and some mild geometric assumptions. The convex-transitivity of some vector-valued function spaces is studied as well. The thesis also touches convex-transitivity of Banach lattices and resembling geometric cases.

Making the most of spatial information in health: A tutorial in Bayesian disease mapping for areal data

Disease maps are effective tools for explaining and predicting patterns of disease outcomes across geographical space, identifying areas of potentially elevated risk, and formulating and validating aetiological hypotheses for a disease. Bayesian models have become a standard approach to disease mapping in recent decades. This article aims to provide a basic understanding of the key concepts involved in Bayesian disease mapping methods for areal data. It is anticipated that this will help in interpretation of published maps, and provide a useful starting point for anyone interested in running disease mapping methods for areal data. The article provides detailed motivation and descriptions on disease mapping methods by explaining the concepts, defining the technical terms, and illustrating the utility of disease mapping for epidemiological research by demonstrating various ways of visualising model outputs using a case study. The target audience includes spatial scientists in health and other fields, policy or decision makers, health geographers, spatial analysts, public health professionals, and epidemiologists.

Dance card

Dance card: Hebrew Charity Ball. Black ink on pink paper. Inside is printed with red ink on white paper. 4 pages.

Principals of audit: Testing, data and ‘implicated advocacy’

Historically, school leaders have occupied a somewhat ambiguous position within networks of power. On the one hand, they appear to be celebrated as what Ball (2003) has termed the ‘new hero of educational reform'; on the other, they are often ‘held to account’ through those same performative processes and technologies. These have become compelling in schools and principals are ‘doubly bound’ through this. Adopting a Foucauldian notion of discursive production, this paper addresses the ways that the discursive ‘field’ of ‘principal’ (within larger regimes of truth such as schools, leadership, quality and efficiency) is produced. It explores how individual principals understand their roles and ethics within those practices of audit emerging in school governance, and how their self-regulation is constituted through NAPLAN – the National Assessment Program, Literacy and Numeracy. A key effect of NAPLAN has been the rise of auditing practices that change how education is valued. Open-ended interviews with 13 primary and secondary school principals from Western Australia, South Australia and New South Wales asked how they perceived NAPLAN's impact on their work, their relationships within their school community and their ethical practice.