Radanohjaimen suunnittelu leveille päällystyskoneille

Radanohjaimia käytetään radan poikkisuuntaiseen paikoitukseen sekä oskillointiin ja ne ovat osa paperinvalmistuslinjojen radanhallintajärjestelmiä. Oikein suunnitellulla ja sijoitetulla radanohjaimella voidaan estää haitallisten ratasiirtymien esiintyminen, pienentää hylkymateriaalin määrää sekä parantaa rullauksen laatua. Ohjausperiaatteet sekä niihin liittyvä laitetekniikka on tunnettu jo vuosikymmenten ajan, joskin todelliset radanohjaustarpeet ja -laitteet ovat tähän asti rajoittuneet paino-, tekstiili- ja metalliteollisuudessa käytössä oleville kapeille radoille. Tämän työn tavoitteena oli selvittää 5… 12 metriä leveälle, modernissa päällystyskoneessa kulkevalle paperiradalle soveltuvat ohjausperiaatteet sekä muodostaa radan todennäköisimpiin vauriomuotoihin perustuvat suunnittelukriteerit kahdelle erityyppiselle ohjainkonstruktiolle. Yksitelainen, taivuttava radanohjain soveltuu kohteisiin, joissa ohjainta edeltää suhteellisen pitkä vapaa ratavienti. Kaksitelainen, taittava radanohjain on puolestaan sijoitettavissa huomattavasti lyhyempään ratavientiin. Radanohjauksen teoria pohjautuu pitävän telan ja radan väliseen kohtisuoran tulokulman periaatteeseen, jonka perusteella mikä tahansa yhdensuuntaisuuspoikkeama kahden telan välillä johtaa radan poikkisuuntaiseen siirtymään. Tämän periaatteen pohjalta voidaan dynaamista ohjaustilannetta approksimoida staattisin menetelmin sekä muodostaa kireysmuutoksiin ja aaltoiluun perustuvat geometrian mitoitusperiaatteet ohjaimen ympäristön ratavienneille. Nopean ohjauksen toteutus edellyttää radanohjaimen liikkeen olevan nivelen ympäri tapahtuvaa yhdistettyä translaatio- ja rotaatioliikettä. Ohjainkonstruktiot suunnitellaan siten, että teorian mukaiset optimaaliset liikeradat toteutuvat vaaditulla ohjausnopeudella. Suunnittelua ohjaavat tuotteille asetetut lujuus- ja värähtelykriteerit sekä aiheeseen liittyvät koneturvallisuusstandardit. Konstruointi suoritetaan järjestelmällisen tuotesuunnitteluprosessin vaiheiden ja menetelmien mukaisesti.

Jauhinterien valmistuksen kehittäminen

Diplomityö käsittelee eräälle paperiteollisuuden komponentteja valmistavalle yritykselle tehtyä tutkimusta, jossa tutkittiin erilaisia valmistusmenetelmiä, joilla voidaan valmistaa uudenlaisia jauhinteriä. Diplomityössä ideoitiin erilaisia jauhinteränkonstruktiovaihtoehtoja. Vaihtoehtoja havainnollistamaan piirrettiin jokaisesta ratkaisusta 3D- mallit. Vaihtoehtojen pohjalta päätettiin suoritettavat valmistustestaukset. Työssä suoritettiin valmistustestejä kuitulaserilla, hiilidioksidilaserilla sekä hienosädeplasmalla. Näiden testien perusteella saatiin näkemys siitä, mikä konstruktiovaihto on valmistusteknisesti paras, täyttäen samalla jauhinterälle asetetut vaatimukset. Diplomityön tuloksena syntyi toimiva ja kustannustehokas ratkaisu jauhinterien valmistamiseksi.

Rullakuljettimen mallinnuksen automatisointi

Tämä diplomityö käsittelee erään rullakuljettia valmistavan yrityksen suunniteluprosessin tehostamista suunnitteluautomaatilla. Diplomityön tavoitteena oli parametrisoida asiakkaan 3D-tuotemalli ja luoda erillinen käyttöliittymä, jolla mallia voidaan määrätyissä rajoissa varioida. Diplomityön tuloksena syntyi toimiva Microsoft Excelilla toteutettu suunnitteluautomaatti, jolla voitiin varioida SolidWorksilla luotua tuotemallia. Suunnitteluautomaatti päivitti mallin lisäksi myös tuotteen valmistuspiirustukset ja komponenttien valmistukseen käytettävät työstökoneiden ohjaustiedostot. Automaatin käyttö lyhensi tuotteen variointiin kuluvaa aikaa alkuperäisestä yhdestä työviikosta kahteen tuntiin, poisti suunnitteluvirheet lähes kokonaan ja vähensi yrityksen rutiinisuunnitteluun käyttämää työaikaa.

World Class Manufacturing (WCM) aineettoman pääoman johtamisen työkaluna

Tämän kvalitatiivisen tutkimuksen tavoitteena on tarkastella jatkuvan pa-rantamisen työkalun, WCM:n, roolia aineettoman pääoman johtajana. Tutkimuksen teoreettisessa osassa selvitetään aineettoman pääoman eri muotoja; inhimillistä, suhde- ja rakennepääomaa. Lisäksi tutkitaan WCM:n ideologiaa, sen käyttöönottoa ja eri osa-alueita. Teoriaosan lopussa selvite-tään WCM:n ja aineettoman pääoman yhteyttä toisiinsa ja niiden vaikutusta suorituskykyyn. Teoriaa tukemaan tehtiin empiirinen tutkimus case -organisaatiossa haastattelemalla organisaation toimihenkilöitä sekä työntekijöitä. Empiirisen tutkimuksen tavoitteena oli selvittää case –organisaation jatkuvan parantamisen mallin kehitystarpeita WCM:n ja inhimillisen pääoman näkö-kulmasta. Tutkimustulokset osoittivat, että WCM:llä voidaan johtaa aineettoman pää-oman eri muotoja – saaden siten myös suorituskykyä paremmaksi.

Sofosbuvir Inhibits Hepatitis E Virus Replication In Vitro and Results in an Additive Effect When Combined With Ribavirin.

Infection with hepatitis E virus genotype 3 may result in chronic hepatitis in immunocompromised patients. Reduction of immunosuppression or treatment with ribavirin or pegylated interferon-α can result in viral clearance. However, safer and more effective treatment options are needed. Here, we show that sofosbuvir inhibits the replication of hepatitis E virus genotype 3 both in subgenomic replicon systems as well as a full-length infectious clone. Moreover, the combination of sofosbuvir and ribavirin results in an additive antiviral effect. Sofosbuvir may be considered as an add-on therapy to ribavirin for the treatment of chronic hepatitis E in immunocompromised patients.

Quality potential of DIP and hardwood CTMP based raw materials in woodcontaining printing paper

The objective of the thesis was to define the quality potential of DIP and hardwood CTMP based raw material furnish for a printing paper production and to define the end product's pulp-based boundary conditions especially when thinking of Chinese markets. Although the Chinese paper industry expands rapidly, the production of some paper grades is still exiguous. Especially the softwood resources are limited in Asia, thus the purpose of the thesis was to find out the possibilities to produce printing paper in China from local raw materials. Bleached CTMP can be produced, for example, from fast-growing hardwood species like eucalyptus and poplar. Therefore in this thesis it was examined if good quality printing paper is possible to produce by using deinked pulp and hardwood CTMP based furnish. In the first section of experimental part, various deinked pulps and chemithermomechanical pulps were compared. The deinked pulps were from China, Central Europe and Finland. Central European was made for magazine papers, and the Chinese as well as the Finnish pulps were made for newsprints. Two of the BCTMPs were from China and those both were made from poplar, whereas one BCTMP was made from eucalyptus in a pilot plant. There were significant differences especially between BCTMPs and their paper properties. In the second section of experimental part, the deinked pulp and eucalyptus BCTMP were blended to produce handsheets. The results show that producing the highest quality printing paper would be difficult from these raw materials. Deinked pulp affected especially the strength and optical properties as well as calender blackening. The BCTMP was found to have effects mostly on the smoothness, strength and optical properties as well as calender blackening.

Managing manufacturing data and improving its accuracy

There are two main objects in this study: First, to prove the importance of data accuracy to the business success, and second, create a tool for observing and improving the accuracy of ERP systems production master data. Sub-objective is to explain the need for new tool in client company and the meaning of it for the company. In the theoretical part of this thesis the focus is in stating the importance of data accuracy in decision making and it's implications on business success. Also basics of manufacturing planning are introduced in order to explain the key vocabulary. In the empirical part the client company and its need for this study is introduced. New master data report is introduced, and finally, analysing the report and actions based on the results of analysis are explained. The main results of this thesis are finding the interdependence between data accuracy and business success, and providing a report for continuous master data improvement in the client company's ERP system.

Veneer Properties Determination for Plywood Manufacturing

The objective in this Master's Thesis was to determine and verify quality criteria for veneer in plywood manufacturing. In plywood manufacturing the veneer quality has a decisive part how well it can be produced to a final product. Modern equipment run at high speed and capacity. These machines require a good quality veneer to be able to maintain them. The quality criteria determination was done after the dominant veneer properties were determined. This research focuses to the birch veneer quality determination. The machines involved in the veneer manufacturing are introduced in the materials and methods section. The different veneer properties are determined and the measuring devices to measure these properties are examined. There are many parts in veneer manufacturing and these have different requirements to the veneer quality. To determine and verify these properties for every machine was the most demanding part of this Master's Thesis. During the research some new ideas and ways to measure veneer properties were also tested. Veneer properties and quality was followed in a factory environment and in a test runs at the Raute. Different machines were followed carefully in the production environment while for example test pieces were taken from veneers that broke on the line. Sample pieces were tested on site or delivered to Nastola for more extensive testing. Based on the tests and research the criteria for veneer to every machine involved in the veneer production were created. These veneer quality tolerances are recommendations to ensure that the machine operation will not be affected by the veneer quality.

Radioterapia externa conformada 3D para o carcinoma de próstata: experiência do Instituto do Radium de Campinas com 285 pacientes

OBJETIVO: Reportar resultados de tratamentos do câncer de próstata com radioterapia conformada 3D realizados em uma única instituição. MATERIAIS E MÉTODOS: De julho de 1997 a janeiro de 2002, 285 pacientes consecutivos com câncer de próstata foram submetidos a radioterapia conformada 3D com dose mediana de 7.920 cGy na próstata e analisados retrospectivamente. A distribuição segundo o grupo de risco foi a seguinte: baixo risco - 95 (33,7%); risco intermediário - 66 (23,4%); alto risco - 121 (42,9%) pacientes. RESULTADOS: Em seguimento mediano de 53,6 meses (3,6-95,3 meses), sobrevidas atuariais global, causa específica, livre de metástases a distância e livre de recidiva bioquímica em cinco anos foram de 85,1%, 97,0%, 94,2% e 75,8%, respectivamente. Sobrevidas atuariais livre de toxicidade retal e urinária tardias em cinco anos foram de 96,4% e 91,1%, respectivamente. Ressecção transuretral pré-radioterapia conformada 3D e doses > 70 Gy em 30% do volume da bexiga implicaram maior toxicidade urinária tardia grau 2-3 em cinco anos (p = 0,0002 e p = 0,0264, respectivamente). CONCLUSÃO: A primeira experiência relatada de radioterapia conformada 3D no Brasil permitiu altas doses de radiação, com toxicidades retal e urinária aceitáveis. A existência de ressecção transuretral de próstata pré-radioterapia conformada 3D pode sinalizar maior risco de toxicidade urinária tardia grau 2-3 após irradiação. Restrição da dose < 70 Gy em 30% do volume da bexiga à tomografia de planejamento pode reduzir complicações urinárias tardias.

Resultados preliminares en la caracterización geométrica 3D de un litosoma arenoso de progradación deltaica mediante Georadar (GPR) (Fm. Arenisca de Roda, Eoceno, Cuenca de Graus-Tremp).

A set of GPR profiles have been recorded in order to determine the 3D geometry of a prograding delta-front sandbody (Roda sandstone formation, Eocene, Graus-Tremp basin). Common Mid Points (CMP) also have been recorded to obtain the velocity of the electromagnetic wave in ground. In order to build the topsurface of a 3D prism a set of topographic points have been acquired. Most of the GPR profiles are oriented parallel to the progradation direction (NNE-SSW) and show the expected geometries. The 3D prism has been built from the individual profiles, which shows the three dimensional geometry of the sandy lithosome.

An Advocacy for the Use of 3D Stem Cell Culture Systems for the Development of Regenerative Medicine: An Emphasis on Photoreceptor Generation

The availability of stem cells is of great promise to study early developmental stages and to generate adequate cells for cell transfer therapies. Although many researchers using stem cells were successful in dissecting intrinsic and extrinsic mechanisms and in generating specific cell phenotypes, few of the stem cells or the differentiated cells show the capacity to repair a tissue. Advances in cell and stem cell cultivation during the last years made tremendous progress in the generation of bona fide differentiated cells able to integrate into a tissue after transplantation, opening new perspectives for developmental biology studies and for regenerative medicine. In this review, we focus on the main works attempting to create in vitro conditions mimicking the natural environment of CNS structures such as the neural tube and its development in different brain region areas including the optic cup. The use of protocols growing cells in 3D organoids is a key strategy to produce cells resembling endogenous ones. An emphasis on the generation of retina tissue and photoreceptor cells is provided to highlight the promising developments in this field. Other examples are presented and discussed, such as the formation of cortical tissue, the epithelial gut or the kidney organoids. The generation of differentiated tissues and well-defined cell phenotypes from embryonic stem (ES) cells or induced pluripotent cells (iPSCs) opens several new strategies in the field of biology and regenerative medicine. A 3D organ/tissue development in vitro derived from human cells brings a unique tool to study human cell biology and pathophysiology of an organ or a specific cell population. The perspective of tissue repair is discussed as well as the necessity of cell banking to accelerate the progress of this promising field.

Additive effects of rapamycin and aspirin on dendritic cell allostimulatory capacity.

Acting as antigen presenting cells, mature dendritic cells (DCs) initiate both innate and adaptive alloimmune responses. However, immature DCs are weak immunostimulators and mediate tolerogenic effects under certain conditions. Tolerogenic activities of immature DCs can be enhanced by pharmacological agents. Here, we compared pharmacological DC preconditioning with rapamycin and aspirin, applied alone or in combination, on LPS-induced DC maturation and T-cell allostimulatory capacity. Preconditioning with aspirin but not rapamycin tended to reduce the number of mouse bone marrow-derived immature DCs expressing CD40 and major histocompatibility complex class II molecules upon LPS stimulation. Conversely, DC preconditioning with rapamycin, but not aspirin, reduced T-cell alloproliferative responses. A combination of rapamycin and aspirin was more effective than either drug applied alone with respect to inhibition of T-cell alloproliferation. The two agents in combination reduced numbers of CD4(+)IFN-γ(+) Th1 and CD4(+)IL-17(+) Th17 effector cells while maintaining Foxp3(+) regulatory T cells. These results suggest aspirin may moderately enhance rapamycin-mediated inhibition of DC allostimulatory capacity.