Thermal modelling of semiconductor switches in three-level Neutral Point Clamped Medium Voltage DTC-inverter

The aim of this thesis is to investigate the thermal loading of medium voltage three-level NPC inverter’s semiconductor IGCT switches in different operation points. The objective is to reach both a fairly accurate off-line simulation program and also so simple a simulation model that its implementation into an embedded system could be reasonable in practice and a real time use should become feasible. Active loading limitation of the inverter can be realized with a thermal model which is practical in a real time use. Determining of the component heating has been divided into two parts; defining of component losses and establishing the structure of a thermal network. Basics of both parts are clarified. The simulation environment is Matlab-Simulink. Two different models are constructed – a more accurate one and a simplified one. Potential simplifications are clarified with the help of the first one. Simplifications are included in the latter model and the functionalities of both models are compared. When increasing the calculation time step a decreased number of considered components and time constants of the thermal network can be used in the simplified model. Heating of a switching component is dependent on its topological position and inverter’s operation point. The output frequency of the converter defines mainly which one of the switching components is – because of its losses and heating – the performance limiting component of the converter. Comparison of results given by different thermal models demonstrates that with larger time steps, describing of fast occurring switching losses becomes difficult. Generally articles and papers dealing with this subject are written for two-level inverters. Also inverters which apply direct torque control (DTC) are investigated rarely from the heating point of view. Hence, this thesis completes the former material.

Identification of the major fungitoxic component of cinnamon bark oil

The study was done to identify the most active fungitoxic component of cinnamon bark (Cinnamomum zeylanicum) oil that can be used as a marker for standardization of cinnamon extract or oil based natural preservative of stored seeds. Aspergillus flavus and A. ruber were used as test fungi. The hexane extracted crude oil and the hydro-distilled essential oil from cinnamon bark had complete growth inhibition concentration (CGIC) of 300 and 100 µl/l, respectively. Both oils produced three fractions on preparative thin layer silica-gel chromatography plates. The fraction-2 of either oil was the largest and most active, with CGIC of 200 µl/l, but the fungitoxicity was also retained in the other two fractions. The fraction-1 and 3 of the crude oil reduced growth of both the fungal species by 65%, and those of distilled oil by 45% at 200 µl/l. The CGIC of these fractions from both the sources was above 500 µl/l. The gas chromatography and mass spectrometry (GC-MS) of the fraction-2 of the hexane extract revealed that it contained 61% cinnamaldehyde, 29% cinnamic acid, and two minor unidentified compounds in the proportion of 4% and 6%. The GC-MS of the fraction-2 of the distilled oil revealed that it contained 99.1% cinnamaldehyde and 0.9% of an unidentified compound. The CGIC of synthetic cinnamaldehyde was 300 µl/l and that of cinnamic acid above 500 µl/l. The 1:1 mixture of cinnamaldehyde and cinnamic acid had CGIC of 500 µl/l. The data revealed that cinnamaldehyde was the major fungitoxic component of hexane extract and the distilled essential oil of cinnamon bark, while other components have additive or synergistic effects on total fungitoxicity. It is suggested that the natural seed preservative based on cinnamon oil can be standardized against cinnamaldehyde.

Imaging and Characterisation of Dirt Particles in Pulp and Paper

Dirt counting and dirt particle characterisation of pulp samples is an important part of quality control in pulp and paper production. The need for an automatic image analysis system to consider dirt particle characterisation in various pulp samples is also very critical. However, existent image analysis systems utilise a single threshold to segment the dirt particles in different pulp samples. This limits their precision. Based on evidence, designing an automatic image analysis system that could overcome this deficiency is very useful. In this study, the developed Niblack thresholding method is proposed. The method defines the threshold based on the number of segmented particles. In addition, the Kittler thresholding is utilised. Both of these thresholding methods can determine the dirt count of the different pulp samples accurately as compared to visual inspection and the Digital Optical Measuring and Analysis System (DOMAS). In addition, the minimum resolution needed for acquiring a scanner image is defined. By considering the variation in dirt particle features, the curl shows acceptable difference to discriminate the bark and the fibre bundles in different pulp samples. Three classifiers, called k-Nearest Neighbour, Linear Discriminant Analysis and Multi-layer Perceptron are utilised to categorize the dirt particles. Linear Discriminant Analysis and Multi-layer Perceptron are the most accurate in classifying the segmented dirt particles by the Kittler thresholding with morphological processing. The result shows that the dirt particles are successfully categorized for bark and for fibre bundles.

Immersion enthalpy variation of surface-modified mineral activated carbon in lead (II) aqueous solution adsorption: the relation between immersion enthalpy and adsorption capacity

An activated carbon was obtained by chemical activation with phosphoric acid, CM, from a mineral carbon. Afterwards, the carbon was modified with 2 and 5 molL-1, CMox2 and CMox5 nitric acid solutions to increase the surface acid group contents. Immersion enthalpy at pH 4 values and Pb2+ adsorption isotherms were determined by immersing activated carbons in aqueous solution. The surface area values of the adsorbents and total pore volume were approximately 560 m².g-1 and 0.36 cm³g-1, respectively. As regards chemical characteristics, activated carbons had higher acid sites content, 0.92-2.42 meq g-1, than basic sites, 0.63-0.12 meq g-1. pH values were between 7.4 and 4.5 at the point of zero charge, pH PZC. The adsorbed quantity of Pb2+ and the immersion enthalpy in solution of different pH values for CM activated carbon showed that the values are the highest for pH 4, 15.7 mgg-1 and 27.6 Jg-1 respectively. Pb2+ adsorption isotherms and immersion enthalpy were determined for modified activated carbons and the highest values were obtained for the activated carbon that showed the highest content of total acid sites on the surface.

Design of an adsorbent employing activated carbon fiber to remove lead

Zorflex® activated carbon fibers (ACF), reference FM100 198B, are used before and after an oxidizing procedure with H3PO4 to study the adsorption of Pb2+. The point of zero charge was determined for the modified and unmodified fiber giving values of 2.3 and 4.3, respectively. After oxidizing the ACF, the fiber showed to have a greater Pb2+ adsorption capacity in comparison with the unmodified fiber, which is related with the acid sites increase, where lead was mainly adsorbed. Determination of the BET area was carried out by nitrogen physisorption at 77K. ACFs presented superficial areas between 1000 and 1500 m²/g showing mostly, a microporous structure. The preliminary design of an adsorbent using the modified fiber is presented where the fiber superior physicochemical properties over the unmodified one are observed.

DEVELOPMENT OF LOGIC IN INDIA: SIGNIFICANCE OF 'THE DUOLOGUE BETWEEN PĀYĀSI AND KASSAPA' ("LONG DISCOURSES")

ABSTRACT 'The Duologue of King/Governor Pāyāsi' ("Long Discourses") has long been recognised as a source for the proto-materialism current at the time of the Buddha. What needs to be stressed is the significance of the text as a pointer to the development of Logic in India. Perception (observation and experiment employing the joint method of agreement and difference), which is an accepted method of experimental enquiry, and reasoning from analogy, which can lead at best to a probable conclusion - these two are the only means employed to settle the dispute concerning the existence of the other-world. The Jain version of the same duologue-cum-parable, though varying in minor details regarding the name and identity of the monk refuting the king/governor, contains the same contrast, namely, perception versus analogical reasoning. There can be little doubt that the original parable was conceived with a view to asserting the existence of the other-world. In the Kaṭha Upaniṣad (sixth century BCE), an earlier Brahmanical text, however, instead of argument by analogy, verbal testimony (śabda) was invoked to settle the same point. Naciketas is assailed by doubt about the existence of a person after his or her death. The authority of Yama, the Pluto of Indian mythology, is invoked to convince him that the other-world does exist. Thus, the three parables taken together exhibit three means of knowledge in operation: verbal testimony and argument by analogy pitted against perception.

Classification, comorbidity, heredity, and risk factors of female sexual dysfunctions

Female sexual dysfunctions, including desire, arousal, orgasm and pain problems, have been shown to be highly prevalent among women around the world. The etiology of these dysfunctions is unclear but associations with health, age, psychological problems, and relationship factors have been identified. Genetic effects explain individual variation in orgasm function to some extent but until now quantitative behavior genetic analyses have not been applied to other sexual functions. In addition, behavior genetics can be applied to exploring the cause of any observed comorbidity between the dysfunctions. Discovering more about the etiology of the dysfunctions may further improve the classification systems which are currently under intense debate. The aims of the present thesis were to evaluate the psychometric properties of a Finnish-language version of a commonly used questionnaire for measuring female sexual function, the Female Sexual Function Index (FSFI), in order to investigate prevalence, comorbidity, and classification, and to explore the balance of genetic and environmental factors in the etiology as well as the associations of a number of biopsychosocial factors with female sexual functions. Female sexual functions were studied through survey methods in a population based sample of Finnish twins and their female siblings. There were two waves of data collection. The first data collection targeted 5,000 female twins aged 33–43 years and the second 7,680 female twins aged 18–33 and their over 18–year-old female siblings (n = 3,983). There was no overlap between the data collections. The combined overall response rate for both data collections was 53% (n = 8,868), with a better response rate in the second (57%) compared to the first (45%). In order to measure female sexual function, the FSFI was used. It includes 19 items which measure female sexual function during the previous four weeks in six subdomains; desire, subjective arousal, lubrication, orgasm, sexual satisfaction, and pain. In line with earlier research in clinical populations, a six factor solution of the Finnish-language version of the FSFI received supported. The internal consistencies of the scales were good to excellent. Some questions about how to avoid overestimating the prevalence of extreme dysfunctions due to women being allocated the score of zero if they had had no sexual activity during the preceding four weeks were raised. The prevalence of female sexual dysfunctions per se ranged from 11% for lubrication dysfunction to 55% for desire dysfunction. The prevalence rates for sexual dysfunction with concomitant sexual distress, in other words, sexual disorders were notably lower ranging from 7% for lubrication disorder to 23% for desire disorder. The comorbidity between the dysfunctions was substantial most notably between arousal and lubrication dysfunction even if these two dysfunctions showed distinct patterns of associations with the other dysfunctions. Genetic influences on individual variation in the six subdomains of FSFI were modest but significant ranging from 3–11% for additive genetic effects and 5–18% for nonadditive genetic effects. The rest of the variation in sexual functions was explained by nonshared environmental influences. A correlated factor model, including additive and nonadditive genetic effects and nonshared environmental effects had the best fit. All in all, every correlation between the genetic factors was significant except between lubrication and pain. All correlations between the nonshared environment factors were significant showing that there is a substantial overlap in genetic and nonshared environmental influences between the dysfunctions. In general, psychological problems, poor satisfaction with the relationship, sexual distress, and poor partner compatibility were associated with more sexual dysfunctions. Age was confounded with relationship length but had over and above relationship length a negative effect on desire and sexual satisfaction and a positive effect on orgasm and pain functions. Alcohol consumption in general was associated with better desire, arousal, lubrication, and orgasm function. Women pregnant with their first child had fewer pain problems than nulliparous nonpregnant women. Multiparous pregnant women had more orgasm problems compared to multiparous nonpregnant women. Having children was associated with less orgasm and pain problems. The conclusions were that desire, subjective arousal, lubrication, orgasm, sexual satisfaction, and pain are separate entities that have distinct associations with a number of different biopsychosocial factors. However, there is also considerable comorbidity between the dysfunctions which are explained by overlap in additive genetic, nonadditive genetic and nonshared environmental influences. Sexual dysfunctions are highly prevalent and are not always associated with sexual distress and this relationship might be moderated by a good relationship and compatibility with partner. Regarding classification, the results supports separate diagnoses for subjective arousal and genital arousal as well as the inclusion of pain under sexual dysfunctions.

Formation of beetroot seedlings in different protected environments, substrates and containers in Aquidauana region, State of Mato Grosso do Sul, Brazil

This study with beetroot seedlings, cultivar Top Tall Early Wonder, was carried out at the State University of Mato Grosso do Sul (UEMS/Aquidauana), from October to November 2008. Three environments of cultivation were used: greenhouse; nursery with monofilament screen of 50 % of shading; and nursery with aluminized thermal reflective screen of 50% of shading. In these environments, three polystyrene trays of 72, 128 and 200 cells, filled with four substrates, were tested: soil; Plantmax®; coconut fiber and vermiculite. There were no replication environments and then each one was considered an experiment alone. For each environment, it was adopted a completely randomized design in factorial scheme 3x4 (three trays x four substrates), with four replications, performing individual analysis of variance and joint analysis of experiments for environment comparisons. The monofilament screen is the best environment for seedlings produced in tray of 72 cells, and the greenhouse was the best environment for seedlings produced in trays of 128 cells. The best seedlings were formed in the tray of 72 cells. Vermiculite was the best substrate.

Development of racemization catalysts for dynamic kinetic resolution

Preparation of optically active compounds is of high importance in modern medicinal chemistry. Despite recent advances in the field of asymmetric synthesis, resolution of racemates still remains the most utilized way for preparation of single enantiomers in industrial scale due to its cost-efficiency and simplicity. Enzymatic kinetic resolution (KR) of racemates is a classical method for separation of enantiomers. One of its drawbacks is the limitation of target enantiomer yield to 50%. Dynamic Kinetic Resolution (DKR) allows to reach yields up to 100% by in situ racemization of the less reactive enantiomer. In the first part of this thesis, a number of half-sandwich ruthenium complexes were prepared and evaluated as catalysts for racemization of optically active secondary alcohols. A leading catalyst, Bn5CpRu(CO)2Cl, was identified. The catalyst discovered was extensively characterized by its application for DKR of a broad range of secondary alcohols in a wide range of reaction loadings (1 mmol – 1 mol). Cost-efficient chromatography-free procedure for preparation of this catalyst was developed. Further, detailed kinetic and mechanistic studies of the racemization reactions were performed. Comparison of racemization rates in the presence of Bn5CpRu(CO)2Cl and Ph5CpRu(CO)2Cl catalysts reveals that the performance of the catalytic system can be adjusted by matching of the electronic properties of the catalysts and the substrates. Moreover, dependence of the rate-limiting step from the electronic properties of the reagents was observed. Important conclusions about reaction mechanism were made. Finally, an alternative approach to DKR of amines based on space separated vessels was addressed. This procedure allows the combination of thermolabile enzyme with racemization catalysts active only at high temperatures.

Applications and Benefits of Adaptive Pulsed GMAW

In ship and offshore terminal construction, welded cross sections are thick and the number of welds very high. Consequently, there are two aspects of great importance; cost and heat input. Reduction in the welding operation time decreases the costs of the work force and avoids excessive heat, preventing distortion and other weld defects. The need to increase productivity while using a single wire in the GMAW process has led to the use of a high current and voltage to improve the melting rate. Unfortunately, this also increases the heat input. Innovative GMAW processes, mostly implemented for sheet plate sections, have shown significant reduction in heat input (Q), low distortion and increase in welding speed. The aim of this study is to investigate adaptive pulsed GMAW processes and assess relevant applications in the high power range, considering possible benefits when welding thicker sections and high yield strength steel. The study experimentally tests the usability of adaptive welding processes and evaluates their effects on weld properties, penetration and shapes of the weld bead.The study first briefly reviews adaptive GMAW to evaluate different approaches and their applications and to identify benefits in adaptive pulsed. Experiments are then performed using Synergic Pulsed GMAW, WiseFusionTM and Synergic GMAW processes to weld a T-joint in a horizontal position (PB). The air gap between the parts ranges from 0 to 2.5 mm. The base materials are structural steel grade S355MC and filler material G3Si1. The experiment investigates heat input, mechanical properties and microstructure of the welded joint. Analysis of the literature reveals that different approaches have been suggested using advanced digital power sources with accurate waveform, current, voltage, and feedback control. In addition, studies have clearly indicated the efficiency of lower energy welding processes. Interest in the high power range is growing and a number of different approaches have been suggested. The welding experiments in this study reveal a significant reduction of heat input and a weld microstructure with the presence of acicular ferrite (AF) beneficial for resistance to crack propagation. The WiseFusion bead had higher dilution, due to the weld bead shape, and low defects. Adaptive pulse GMAW processes can be a favoured choice when welding structures with many welded joints. The total heat reduction mitigates residual stresses and the bead shape allows a higher amperage limit. The stability of the arc during the process is virtually spatter free and allows an increase in welding speed.

Taxonomy, species richness and biogeography of Finnish crane flies (Diptera, Tipuloidea).

Biodiversity is unequally spread throughout terrestrial ecosystems. The highest species richness of animals and plants is encountered around the Equator, and naturalists observe a decrease in the number of creatures with increasing latitude. Some animal groups, however, display an anomalous species richness pattern, but these are exceptions to the general rule. Crane flies (Diptera, Tipuloidea) are small to large sized, non-biting nematoceran insects, being mainly associated with moist environments. The species richness of crane flies is highest in the tropics, but these insects are species rich and abundant in all biogeographic realms, boreal and arctic biomes included. The phylogeny and systematics of crane flies are still at an early stage and somewhat controversial. New species are constantly discovered even from temperate Europe, faunistically the best known continent. Crane flies have been rather neglected group of insects in Finland. The history of Finnish crane fly taxonomy and faunistics started in 1907, the year when Carl Lundström published his two first articles on tipuloids. Within roughly 100 years there have been only a handful of entomologists studying the Finnish fauna, and the species richness and natural history of these flies have remained poorly understood and mapped. The aim of this thesis is to clarify the taxonomy of Finnish crane flies, present an updated and annotated list of species and seek patterns in regional species richness and assemblage composition. Tipula stackelbergi Alexander has been revised (I). This species was elevated to a species rank from a subspecific rank under T. pruinosa Wiedemann and T. stackelbergi was also deleted from the list of European crane flies. Two new synonyms were found: T. subpruinosa Mannheims is a junior synonym of T. freyana Lackschewitz and T. usuriensis Alexander is a junior synonym of T. pruinosa. A new species Tipula recondita Pilipenko & Salmela has been described (II). Both morphology and COI (mtDNA) sequences were used in the assessment of the status of the species. The new species is highly disjunct, known from Finland and Russian Far East. A list of Finnish crane flies was presented, including the presence of species in the Finnish biogeographical provinces (III). A total of twenty-four species were formally reported for the first time from Finland and twenty-two previously reported species were deleted from the list. A short historical review on the studies of Finnish crane flies has been provided. The current list of Finnish species consists of 338 crane flies (IV, Appendix I). Species richness of all species and saproxylic/fungivorous species is negatively correlated with latitude, but mire-dwelling species show a reversed species richness gradient (i.e. an increase in the number of species toward north). Provincial assemblages displayed a strong latitudinal gradient and faunistic distance increased with increasing geographical distance apart of the provinces. Nearly half (48 %) of the Finnish crane flies are Trans-Palaearctic, roughly one-third (34 %) are West Palaearctic and only 16 and 2 % are Holarctic and Fennoscandian, respectively. Due to the legacy of Pleistocene glaciations, endemic Fennoscandian species are problematic and it is thus concluded that there are probably no true endemic crane flies in this region. Finally, there are probably species living within Finnish borders that have hitherto remained unnoticed. Based on subjective assessment, the number of “true” (i.e. recorded + unknown species) species count of Finnish crane flies is at minimum 350.

Leukograms of healthy Holstein calves within the first month of life

To establish reference values and to assess the influence of age on the leukograms of healthy Holstein calves, blood samples were obtained from 300 animals. These samples were distributed equally (n=20) among 15 experimental groups according to age: birth to 8 hours, 9 to 16 hours, 17 to 24 hours, 2 days, 3 days, 4 days, 5 days, 6 to 7 days, 8 to 9 days, 10 to 11 days, 12 to 13 days, 14 to 15 days, 16 to 20 days, 21 to 25 days and 26 to 30 days of age. The maximum numbers of leukocytes (9,305.0/mL), segmented neutrophils (6,551.2/mL) and total neutrophils (6,678.3/mL) were noted within the first 8 hours of life, while band neutrophils peaked in number (133.3/mL) between 9 and 16 hours after birth. Meanwhile, the maximum total lymphocyte (4,992.1/µL) and typical lymphocyte (4,686.1/µL) counts occurred between 21 and 25 days, whereas atypical lymphocytes (388.5/µL) reached their maximum number between 26 and 30 days, demonstrating an inversion of the neutrophil:lymphocyte ratio over time. Thus, the influence of age on the leukocyte count of the evaluated calves was verified. The release of endogenous corticosteroids during labor or at birth may contribute to this variation in leukograms with age.

Impact of ivermectin-resistant gastrointestinal nematodes in feedlot cattle in Argentina

The aim was to evaluate for 75 days the impact on production of the remaining burden of ivermectin (IVM)-resistant parasites in naturally infected feedlot calves. The herds came from tick-infested areas of cattle breeding where the systematic use of IVM to control tick increases the gastrointestinal parasites resistant to this drug. This investigation was carried out in two commercial feedlots in Buenos Aires province. In feedlot A, two groups of 35 animal each received IVM 1% and the other received ricobendazole (RBZ) 10% respectively. The same was done in feedlot B. On day 0, two groups of 35 animals were made in feedlots A and B. Fecal samples were taken on days 0, 22, 54 and 75 pos-treatment (PT), and body weight was registered, from each animal. Fecal samples were processed for individual count of eggs per gram (EPG) and pooled fecal culture was carried out for identification of the parasite genus in each sampling. Fecal egg count reduction test (FECR) was calculated on day 22 PT. The study design used was a totally randomized block, with commercial feedlot and sex as block variables. For data analysis, a mixed model of the SAS statistical program was used. The FECR average on day 22 was 28.4% in the IVM group, and 94,2 % in the RBZ group . From this date on, significant differences in EPG were kept until day 54. EPG counts were only equal near the end of the trial, on day 75 (p=0.16). In both commercial feedlots, especially in the IVM group, Cooperia spp. was the most prevalent parasite in the fecal cultures. Significant differences in weight (P<0.01) on post-treatment day 75 was found between the average weight in the RBZ and the IVM group (246 vs. 238 kg respectively), what means a difference of 8.3% in gains. The importance for production in the antiparasite failure treatment in commercial feedlots was demonstrated, and the need of pos-treatment controls to evaluate the efficacy of the antiparasitic administered is emphasized.

The analysis of bifurcations in the spatially distributed Langford system

In this thesis the bifurcational behavior of the solutions of Langford system is analysed. The equilibriums of the Langford system are found, and the stability of equilibriums is discussed. The conditions of loss of stability are found. The periodic solution of the system is approximated. We consider three types of boundary condition for Langford spatially distributed system: Neumann conditions, Dirichlet conditions and Neumann conditions with additional requirement of zero average. We apply the Lyapunov-Schmidt method to Langford spatially distributed system for asymptotic approximation of the periodic mode. We analyse the influence of the diffusion on the behavior of self-oscillations. As well in the present work we perform numerical experiments and compare it with the analytical results.

Factors predicting mortality in type 2 diabetes. With special reference to physical exercise, blood pressure, proteinuria, inflammation and P wave duration

Background: Type 2 diabetes patients have a 2-4 fold risk of cardiovascular disease (CVD) compared to the general population. In type 2 diabetes, several CVD risk factors have been identified, including obesity, hypertension, hyperglycemia, proteinuria, sedentary lifestyle and dyslipidemia. Although much of the excess CVD risk can be attributed to these risk factors, a significant proportion is still unknown. Aims: To assess in middle-aged type 2 diabetic subjects the joint relations of several conventional and non-conventional CVD risk factors with respect to cardiovascular and total mortality. Subjects and methods: This thesis is part of a large prospective, population based East-West type 2 diabetes study that was launched in 1982-1984. It includes 1,059 middle-aged (45-64 years old) participants. At baseline, a thorough clinical examination and laboratory measurements were performed and an ECG was recorded. The latest follow-up study was performed 18 years later in January 2001 (when the subjects were 63-81 years old). The study endpoints were total mortality and mortality due to CVD, coronary heart disease (CHD) and stroke. Results: Physically more active patients had significantly reduced total, CVD and CHD mortality independent of high-sensitivity C-reactive protein (hs-CRP) levels unless proteinuria was present. Among physically active patients with a hs-CRP level >3 mg/L, the prognosis of CVD mortality was similar to patients with hs-CRP levels ≤3 mg/L. The worst prognosis was among physically inactive patients with hs-CRP levels >3 mg/L. Physically active patients with proteinuria had significantly increased total and CVD mortality by multivariate analyses. After adjustment for confounding factors, patients with proteinuria and a systolic BP <130 mmHg had a significant increase in total and CVD mortality compared to those with a systolic BP between 130 and 160 mmHg. The prognosis was similar in patients with a systolic BP <130 mmHg and ≥160 mmHg. Among patients without proteinuria, a systolic BP <130 mmHg was associated with a non-significant reduction in mortality. A P wave duration ≥114 ms was associated with a 2.5-fold increase in stroke mortality among patients with prevalent CHD or claudication. This finding persisted in multivariable analyses. Among patients with no comorbidities, there was no relationship between P wave duration and stroke mortality. Conclusions: Physical activity reduces total and CVD mortality in patients with type 2 diabetes without proteinuria or with elevated levels of hs-CRP, suggesting that the anti-inflammatory effect of physical activity can counteract increased CVD morbidity and mortality associated with a high CRP level. In patients with proteinuria the protective effect was not, however, present. Among patients with proteinuria, systolic BP <130 mmHg may increase mortality due to CVD. These results demonstrate the importance of early intervention to prevent CVD and to control all-cause mortality among patients with type 2 diabetes. The presence of proteinuria should be taken into account when defining the target systolic BP level for prevention of CVD deaths. A prolongation of the duration of the P wave was associated with increased stroke mortality among high-risk patients with type 2 diabetes. P wave duration is easy to measure and merits further examination to evaluate its importance for estimation of the risk of stroke among patients with type 2 diabetes.