Blattmeier

Technische Produktionssysteme und Prozesse - welcher Technologie auch immer - müssen den Bedürfnissen der industriellen Bauteilherstellung für Endanwendungen im Automobilbau entsprechen. Es stellt sich zunächst die Frage, auf welchem technologischen Reifegrad sich die generativen Technologien für den Automobilbau derzeit befinden? Welche außerordentlichen Vorteile können generative Prozessketten gegenüber konventionellen Herstellungsverfahren bieten und welche Hürden müssen genommen werden? Im Vordergrund der Untersuchung steht die Betrachtung von Pre-, In- und Post-Prozessen generativer wie auch konventioneller Produktionsverfahren. Bei der Gegenüberstellung der Prozessketten werden Maßstäbe angesetzt, die derzeit bei der Bauteilherstellung im Automobilbau Gültigkeit haben und auf Kriterien wie Effizienz, Reproduzierbarkeit und Kontrollierbarkeit aufbauen. Schließlich findet eine Einschätzung aus der Perspektive der Technologieintegration in derzeitige Produktionssysteme und Lieferketten statt. Es werden Restriktionen und Handlungsfelder von generativen Prozessen deutlich, die für den Einsatz für Endkunden-Bauteile im Fahrzeugbau behandelt werden müssen.

Funktionales Konstruieren – Rapid Technologien für Architektur und Baukonstruktion

Nicht nur in der Medizintechnik, in der Luftfahrt und in der Automobilindustrie werden die generativen Verfahren zunehmend mehr als wichtige Produktionsverfahren angesehen. Auch die (Bau-) Industrie nimmt mehr und mehr die Möglichkeiten und Chancen wahr, welche diese Verfahren für andersartige Konstruktionen und Details eröffnen. Die Ergründung von Veränderungen und Auswirkungen dieser neuen Technologien auf den Entwurf und auf die Umsetzung von Architektur und Baukonstruktion ist Schwerpunkt der Forschungstätigkeiten von Dipl.-Ing. Holger Strauß an den Hochschulstandorten TU Delft, Niederlande und an der Hochschule Ostwestfalen-Lippe in Detmold. Das erste, umfangreiche Forschungsprojekt zu diesem Thema - „Influence of Additive Processes on the development of facade constructions“ - wurde 2008 in Kooperation mit der international agierenden Firma Kawneer-Alcoa im Forschungsschwerpunkt „ConstructionLab“ an der Detmolder Schule für Architektur und Innenarchitektur etabliert. Der Fokus der Bestrebungen liegt zunächst auf der Ergründung von Möglichkeiten für die generative Herstellung von Bauteilen als Ergänzung der Standardprodukte in Systemfassaden. Die Verwendung der Additiven Verfahren und Hightech CAD-CAM Anwendungen bedingt eine neue Art des Konstruierens. Nämlich nicht mehr das fertigungsgerechte, sondern das funktionsgerechte – das „Funktionale Konstruieren“. Neben der Bereicherung der Forschung und Lehre an den Hochschulen durch eine praxisnahe und zielorientierte Aufgabenstellung, fließen alle Ergebnisse in die Promotion von Holger Strauß an der Technischen Universität in Delft am Lehrstuhl Design of Construction bei Prof. Dr.-Ing. Ulrich Knaack ein.

Technologische Reife von generativen Herstellungsverfahren für Endanwendungen im Automobilbau

Technische Produktionssysteme und Prozesse - welcher Technologie auch immer - müssen den Bedürfnissen der industriellen Bauteilherstellung für Endanwendungen im Automobilbau entsprechen. Es stellt sich zunächst die Frage, auf welchem technologischen Reifegrad sich die generativen Technologien für den Automobilbau derzeit befinden? Welche außerordentlichen Vorteile können generative Prozessketten gegenüber konventionellen Herstellungsverfahren bieten und welche Hürden müssen genommen werden? Im Vordergrund der Untersuchung steht die Betrachtung von Pre-, In- und Post-Prozessen generativer wie auch konventioneller Produktionsverfahren. Bei der Gegenüberstellung der Prozessketten werden Maßstäbe angesetzt, die derzeit bei der Bauteilherstellung im Automobilbau Gültigkeit haben und auf Kriterien wie Effizienz, Reproduzierbarkeit und Kontrollierbarkeit aufbauen. Schließlich findet eine Einschätzung aus der Perspektive der Technologieintegration in derzeitige Produktionssysteme und Lieferketten statt. Es werden Restriktionen und Handlungsfelder von generativen Prozessen deutlich, die für den Einsatz für Endkunden-Bauteile im Fahrzeugbau behandelt werden müssen.

Knowledge-Production Processes in Practice Research - Outcomes and Critical Elements

The welfare sector has seen considerable changes in its operational context. Welfare services respond to an increasing number of challenges as citizens are confronted with life’s uncertainties and a variety of complex situations. At the same time the service-delivery system is facing problems of co-operation and the development of staff competence, as well as demands to improve service effectiveness and outcomes. In order to ensure optimal user outcomes in this complex, evolving environment it is necessary to enhance professional knowledge and skills, and to increase efforts to develop the services. Changes are also evident in the new emergent knowledge-production models. There has been a shift from knowledge acquisition and transmission to its construction and production. New actors have stepped in and the roles of researchers are subject to critical discussion. Research outcomes, in other words the usefulness of research with respect to practice development, is a topical agenda item. Research is needed, but if it is to be useful it needs to be not only credible but also useful in action. What do we know about different research processes in practice? What conceptions, approaches, methods and actor roles are embedded? What is the effect on practice? How does ‘here and now’ practice challenge research methods? This article is based on the research processes conducted in the institutes of practice research in social work in Finland. It analyses the different approaches applied by elucidating the theoretical standpoints and the critical elements embedded in them, and reflects on the outcomes in and for practice. It highlights the level of change and progression in practice research, arguing for diverse practice research models with a solid theoretical grounding, rigorous research processes, and a supportive infrastructure.

Ansätze zur Verbesserung von Qualität und Wirtschaftlichkeit bei generativen Verfahren durch Optimierung des Pre-Processes

Mittels generativer Fertigung ist es heute möglich die, Entwicklungszeit und Ferti-gungsdauer von Prototypen, Produkten und Werkzeugen zu verkürzen. Neben dieser Zeitersparnis sind die im Vergleich zu konventionellen Fertigungsverfahren unwe-sentlichen Geometriebeschränkungen für den Anwender von besonderem Interesse. Dieses Alleinstellungsmerkmal der generativen Fertigung macht es möglich auch komplexe Geometrie wirtschaftlich herzustellen. Voraussetzung für eine wirtschaftli-che und fehlerminimierte Fertigung ist hierbei eine möglichst optimale Prozessvorbe-reitung (Pre-Processing). Dabei sind insbesondere die Schritte der Bauteilorientie-rung, der Stützkonstruktionserzeugung, der Schichtzerlegung sowie der Bauraum-ausnutzung von Interesse. Auch wenn diese Punkte wesentlich zur Qualität und Wirtschaftlichkeit beitragen, sind die Erkenntnisse für den unerfahrenen Anwender nur unzureichend dokumentiert, wodurch eine möglichst effiziente Fertigung zu-nächst ausgeschlossen werden kann. Anhand unterschiedlicher Beispiele sollen dem Anwender hier die Möglichkeiten zur Optimierung dieser Pre-Processing Schritte er-läutert werden. In diesem Rahmen werden die aktuellen Forschungsergebnisse des Lehrstuhls Rechnereinsatz in der Konstruktion, Institut für Produkt Engineering der Universität Duisburg-Essen in Bezug auf die Optimierung der Bauteilorientierung, der variablen Schichtzerlegung und der Optimierung der Bauraumausnutzung vorgestellt.

Vergleich von additiv und herkömmlich gefertigten Strukturen für ein neuartiges Regalfahrzeug

Der Einsatz additiver Fertigungsverfahren ist in den vergangenen Jahren stark angestiegen. Technische Weiterentwicklungen der Maschinen machen den Einsatz dieser Fertigungsverfahren für Industrieanwen-dungen immer attraktiver. In einer Untersuchung am Fraunhofer-Institut für Materialfluss und Logistik IML wurden die Einsatzmöglichkeiten additiver Fertigungsverfahren im Bereich autonomer Regalfahrzeuge analysiert. Die Adaption eines neuartigen Förderfahrzeuges für den Einsatz in Regalanlagen steht hierbei im Fokus der Untersuchung. Diese Analyse stellt die Besonderheiten der additiven Fertigung heraus und vergleicht den Herstellungsprozess mit herkömmlichen Verfahren.

The German business and information technologies project

The Business and Information Technologies (BIT) project strives to reveal new insights into how modern IT impacts organizational structures and business practices using empirical methods. Due to its international scope, it allows for inter-country comparison of empirical results. Germany — represented by the European School of Management and Technologies (ESMT) and the Institute of Information Systems at Humboldt-Universität zu Berlin — joined the BIT project in 2006. This report presents the result of the first survey conducted in Germany during November–December 2006. The key results are as follows: • The most widely adopted technologies and systems in Germany are websites, wireless hardware and software, groupware/productivity tools, and enterprise resource planning (ERP) systems. The biggest potential for growth exists for collaboration and portal tools, content management systems, business process modelling, and business intelligence applications. A number of technological solutions have not yet been adopted by many organizations but also bear some potential, in particular identity management solutions, Radio Frequency Identification (RFID), biometrics, and third-party authentication and verification. • IT security remains on the top of the agenda for most enterprises: budget spending was increasing in the last 3 years. • The workplace and work requirements are changing. IT is used to monitor employees' performance in Germany, but less heavily compared to the United States (Karmarkar and Mangal, 2007).1 The demand for IT skills is increasing at all corporate levels. Executives are asking for more and better structured information and this, in turn, triggers the appearance of new decision-making tools and online technologies on the market. • The internal organization of companies in Germany is underway: organizations are becoming flatter, even though the trend is not as pronounced as in the United States (Karmarkar and Mangal, 2007), and the geographical scope of their operations is increasing. Modern IT plays an important role in enabling this development, e.g. telecommuting, teleconferencing, and other web-based collaboration formats are becoming increasingly popular in the corporate context. • The degree to which outsourcing is being pursued is quite limited with little change expected. IT services, payroll, and market research are the most widely outsourced business functions. This corresponds to the results from other countries. • Up to now, the adoption of e-business technologies has had a rather limited effect on marketing functions. Companies tend to extract synergies from traditional printed media and on-line advertising. • The adoption of e-business has not had a major impact on marketing capabilities and strategy yet. Traditional methods of customer segmentation are still dominating. The corporate identity of most organizations does not change significantly when going online. • Online sales channel are mainly viewed as a complement to the traditional distribution means. • Technology adoption has caused production and organizational costs to decrease. However, the costs of technology acquisition and maintenance as well as consultancy and internal communication costs have increased.

Potentials and pitfalls of clinical peptidomics and metabolomics

Clinical peptidomics and metabolomics are two emerging "-omics" technologies with the potential not only to detect disease-specific markers, but also to give insight into the disease dependency of degradation processes and metabolic pathway alterations. However, despite their rapid evolution and major investments, a clinical breakthrough, such as the approval of a major cancer biomarker, is still out of sight. What are the reasons for this failure? In this review we focus on three important factors: sensitivity, specificity and the avoidance of bias. The way to clinical implementation of peptidomics and metabolomics is still hampered by many of the problems that had to be solved for genomics and proteomics in the past, as well as new ones that require the creation of new analytic, computational and interpretative techniques. The greatest challenge, however, will be the integration of information from different "-omics" subdisciplines into straightforward answers to clinical questions, for example, in the form of new, superior "meta-markers".

Academic cooperation to foster research and advocacy competences in the occupied Palestinian territory (West Bank)

Palestinians living in the West Bank, a territory occupied by the State of Israel according to International Law, face deprived access to land and a limited ability to move freely which pertains to the presence of Israeli settlements and other infrastructure (closures, restricted or forbidden roads, etc.). This confinement has significant impacts on their economic and social livelihoods, and it is even worsening with the on-going construction of a 709 km long Barrier which mainly runs inside the West Bank. With regard to this situation, there is a clear need to strengthen the capacity of civil society and its representatives to apply sound research processes as a basis for improved advocacy for Palestinian human rights. Monitoring processes and tools are needed to assess the impacts of the Palestinians’ confinement, particularly in relation to the Barrier’s construction. Reliable data has also to be collected, managed, and above all, shared. These challenges have been addressed within the Academic Cooperation Palestine Project (ACPP) that brings together academic partners from the occupied Palestinian territory (oPt) West Bank (WB), and Switzerland as well as other international academic institutions and Palestinian governmental and non-governmental agencies. ACPP started in early 2011 and is designed as a large cooperation networking platform involving researchers, students, public servants and experts from the oPt WB. A large set of actions have already been developed during the first year of the project, including courses, training, and research actions. First relevant results and impacts of the different actions are presented in this paper. Taken as a whole, the project produces valuable results for all partners: useful advocacy material for the Palestinian partners, and a unique “real-scale laboratory” where investigations are jointly conducted to develop novel confinement and change indicators.

Spatial cognition, body representation and affective processes: the role of vestibular information beyond ocular reflexes and control of posture

A growing number of studies in humans demonstrate the involvement of vestibular information in tasks that are seemingly remote from well-known functions such as space constancy or postural control. In this review article we point out three emerging streams of research highlighting the importance of vestibular input: (1) Spatial Cognition: Modulation of vestibular signals can induce specific changes in spatial cognitive tasks like mental imagery and the processing of numbers. This has been shown in studies manipulating body orientation (changing the input from the otoliths), body rotation (changing the input from the semicircular canals), in clinical findings with vestibular patients, and in studies carried out in microgravity. There is also an effect in the reverse direction; top-down processes can affect perception of vestibular stimuli. (2) Body Representation: Numerous studies demonstrate that vestibular stimulation changes the representation of body parts, and sensitivity to tactile input or pain. Thus, the vestibular system plays an integral role in multisensory coordination of body representation. (3) Affective Processes and Disorders: Studies in psychiatric patients and patients with a vestibular disorder report a high comorbidity of vestibular dysfunctions and psychiatric symptoms. Recent studies investigated the beneficial effect of vestibular stimulation on psychiatric disorders, and how vestibular input can change mood and affect. These three emerging streams of research in vestibular science are—at least in part—associated with different neuronal core mechanisms. Spatial transformations draw on parietal areas, body representation is associated with somatosensory areas, and affective processes involve insular and cingulate cortices, all of which receive vestibular input. Even though a wide range of different vestibular cortical projection areas has been ascertained, their functionality still is scarcely understood.

Volumetric analysis of lung nodules in computed tomography (CT): comparison of two different segmentation algorithm softwares and two different reconstruction filters on automated volume calculation.

BACKGROUND A precise detection of volume change allows for better estimating the biological behavior of the lung nodules. Postprocessing tools with automated detection, segmentation, and volumetric analysis of lung nodules may expedite radiological processes and give additional confidence to the radiologists. PURPOSE To compare two different postprocessing software algorithms (LMS Lung, Median Technologies; LungCARE®, Siemens) in CT volumetric measurement and to analyze the effect of soft (B30) and hard reconstruction filter (B70) on automated volume measurement. MATERIAL AND METHODS Between January 2010 and April 2010, 45 patients with a total of 113 pulmonary nodules were included. The CT exam was performed on a 64-row multidetector CT scanner (Somatom Sensation, Siemens, Erlangen, Germany) with the following parameters: collimation, 24x1.2 mm; pitch, 1.15; voltage, 120 kVp; reference tube current-time, 100 mAs. Automated volumetric measurement of each lung nodule was performed with the two different postprocessing algorithms based on two reconstruction filters (B30 and B70). The average relative volume measurement difference (VME%) and the limits of agreement between two methods were used for comparison. RESULTS At soft reconstruction filters the LMS system produced mean nodule volumes that were 34.1% (P < 0.0001) larger than those by LungCARE® system. The VME% was 42.2% with a limit of agreement between -53.9% and 138.4%.The volume measurement with soft filters (B30) was significantly larger than with hard filters (B70); 11.2% for LMS and 1.6% for LungCARE®, respectively (both with P < 0.05). LMS measured greater volumes with both filters, 13.6% for soft and 3.8% for hard filters, respectively (P < 0.01 and P > 0.05). CONCLUSION There is a substantial inter-software (LMS/LungCARE®) as well as intra-software variability (B30/B70) in lung nodule volume measurement; therefore, it is mandatory to use the same equipment with the same reconstruction filter for the follow-up of lung nodule volume.

Complexity and non-linearity in earth surface processes - concepts, methods and applications

Complexity has long been recognized and is increasingly becoming mainstream in geomorphology. However, the relative novelty of various concepts and techniques associated to it means that ambiguity continues to surround complexity. In this commentary, we present and discuss a variety of recent contributions that have the potential to help clarify issues and advance the use of complexity in geomorphology.

Efficiency of frost-cracking processes through space and time: An example from the eastern Italian Alps

It is widely accepted that climate has a strong impact and exerts important feedbacks on erosional processes and sediment transport mechanisms. However, the extent at which climate influences erosion is still a matter of debate. In this paper we test whether frost-cracking processes and related temperature variations can influence the sediment production and surface erosion in a small catchment situated in the eastern Italian Alps. To this extent, we first present a geomorphic map of the region that we complement with published 10Be-based denudation rates. We then apply a preexisting heat-flow model in order to analyze the variations of the frost-cracking intensity (FCI) in the study area, which could have controlled the sediment production in the basin. Finally, we compare the model results with the pattern of denudation rates and Quaternary deposits in the geomorphic map. The model results, combined with field observations, mapping, and quantitative geomorphic analyses, reveal that frost-cracking processes have had a primary role in the production of sediment where the intensity of sediment supply has been dictated and limited by the combined effect of temperature variations and conditions of bedrock preservation. These results highlight the importance of a yet poorly understood process for the production of sediment in mountain areas.

Economic benefits and costs of Sustainable Land Management Technologies: An analysis of WOCAT's global data

Perceived profitability is a key factor in explaining farmers' decision to adopt or not adopt sustainable land management (SLM) technologies. Despite this importance, relatively little is known about the economics of SLM. This paper contributes to the literature by analysing data on costs and perceived cost/benefit ratios of SLM technologies. Data are taken from the World Overview of Conservation Approaches and Technologies technology database and cover 363 case studies conducted in a variety of countries between 1990 and 2012. Based on an in-depth descriptive analysis, we determine what costs accrue to local stakeholders and assess perceived short-term and long-term cost/benefit ratios. Our results show that a large majority of the technologies in our sample are perceived as being profitable: 73% were perceived to have a positive or at least neutral cost/benefit ratio in the short term, while 97% were perceived to have a positive or very positive cost/benefit ratio in the long term. An additional empirical analysis confirms that economic factors are key determinants of land users' decisions to adopt or not adopt SLM technologies. We conclude that a wide range of existing SLM practices generate considerable benefits not only for land users, but for other stakeholders as well. High initial investment costs associated with some practices may, however, constitute a barrier to their adoption; short-term support for land users can help to promote these practices where appropriate.