853 resultados para vapor recovery
Resumo:
Topics of research related to energy and environment have significantly grown in recent years, with the need of its own energy as hydrogen. More particularly, numerous researches have been focused on hydrogen as energy vector. The main portion of hydrogen is presently obtained by reforming of methane or light hydrocarbons (steam, oxy, dry or auto reforming). During the methane steam reforming process the formation of CO2 undesirable (the main contributor to the greenhouse effect) is observed. Thus, an oxide material (sorbent) can be used to capture the CO2 generated during the process and simultaneously shifting the equilibrium of water gas shift towards thermodynamically more favorable production of pure hydrogen. The aim of this study is to develop a material with dual function (catalyst/sorbent) in the reaction of steam reforming of methane. CaO is well known as CO2 sorbent due to its high efficiency in reactions of carbonation and easy regeneration through calcination. However the kinetic of carbonation decreases quickly with time and carbonation/calcination cycles. A calcium aluminate (Ca12Al14O33) should be used to avoid sintering and increase the stability of CaO sorbents for several cycles. Nickel, the industrial catalyst choice for steam reforming has been added to the support from different manners. These bi-functional materials (sorbent/catalyst) in different molar ratios CaO.Ca12Al14O33 (48:52, 65:35, 75:25, 90:10) were prepared by different synthesis methodologies, among them, especially the method of microwave assisted self-combustion. Synthesis, structure and catalytic performances of Ni- CaO.Ca12Al14O33 synthesized by the novel method (microwave assisted selfcombustion) proposed in this work has not being reported yet in literature. The results indicate that CO2 capture time depends both on the CaO excess and on operating conditions (eg., temperature and H2O/CH4 ratio). To be efficient for CO2 sorption, temperature of steam reforming needs to be lower than 700 °C. An optimized percentage corresponding to 75% of CaO and a ratio H2O/CH4 = 1 provides the most promising results since a smaller amount of water avoids competition between water and CO2 to form carbonate and hydroxide. If this competition is most effective (H2O/CH4 = 3) and would have a smaller amount of CaO available for absorption possibly due to the formation of Ca(OH)2. Therefore, the capture time was higher (16h) for the ratio H2O/CH4 = 1 than H2O/CH4 = 3 (7h) using as catalyst one prepared by impregnating the support obtained by microwave assisted self-combustion. Therefore, it was demonstrated that, with these catalysts, the CO2 sorption on CaO modifies the balance of the water gas-shift reaction. Consequently, steam reforming of CH4 is optimized, producing pure H2, complete conversion of methane and negligible concentration of CO2 and CO during the time of capture even at low temperature (650 °C). This validates the concept of the sorption of CO2 together with methane steam reforming
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
INTRODUÇÃO: A decisão de quando iniciar a diálise em pacientes com lesão renal aguda (LRA) que apresentam síndrome urêmica está bem estabelecida, entretanto, com ureia < 200 mg/dl o melhor momento para iniciar a diálise torna-se incerto. OBJETIVO: Este estudo teve como objetivo avaliar a mortalidade e a recuperação da função renal em pacientes com LRA, cujo início da diálise ocorreu em diferentes níveis de ureia. MÉTODOS: Estudo retrospectivo desenvolvido em hospital escola, no estado de São Paulo, Brasil, envolvendo 86 pacientes submetidos à diálise. RESULTADOS: A diálise foi iniciada com uréia > 150 mg/dl em 23 pacientes (grupo I) e uréia > 150 mg/dl em 63 pacientes (grupo II). Hipervolemia e mortalidade foram mais frequentes no grupo I que no grupo II (65,2 x 14,2% - p < 0,05; 39,1 x 68,9% - p < 0,05, respectivamente). Entre os sobreviventes, a recuperação renal foi maior no grupo I (71,4 e 36,8%, respectivamente, p < 0,05). A análise multivariada mostrou risco independente de mortalidade relacionado à sepse, idade > 60 anos, diálise peritoneal e uréia > 150 mg/dl no início da diálise. CONCLUSÃO: Menor mortalidade e maior recuperação renal estão associadas com o diálise iniciada precocemente, conforme baixos níveis de ureia, em pacientes com LRA.
Resumo:
The molecular distillation is show as an alternative for separation and purification of various kinds of materials. The process is a special case of evaporation at high vacuum, in the order from 0.001 to 0.0001 mmHg and therefore occurs at relatively lower temperatures, preserves the material to be purified. In Brazil, molecular distillation is very applied in the separation of petroleum fractions. However, most studies evaluated the temperature of the evaporator, condenser temperature and flow such variables of the molecular distillation oil. Then, to increase the degree of recovery of the fraction of the distillate obtained in the process of the molecular distillation was evaluated the use nonionic surfactants of the class of nonylphenol ethoxylate, molecules able to interact in the liquid-liquid and liquid-vapor interface various systems. In this context, the aim of this work was to verify the influence of commercial surfactant (Ultranex-18 an Ultranex-18-50) in the molecular distillation of a crude oil. The physicochemical characterization of the oil was realized and the petroleum shown an API gravity of 42°, a light oil. Initially, studied the molecular distillation without surfactant using star design experimental (2H ± ) evaluated two variables (evaporator temperature and condenser temperature) and answer variable was the percentage in distillate obtained in the process (D%). The best experimental condition to molecular distillation oil (38% distillate) was obtained at evaporator and condenser temperatures of 120 °C and 10 ° C, respectively. Subsequently, to determine the range of surfactant concentration to be applied in the process, was determined the critical micellar concentration by the technique of scattering X-ray small angle (SAXS). The surfactants Ultranex-18 an Ultranex-18-50 shown the critical micelle concentration in the range of 10-2 mol/L in the hydrocarbons studied. Then, was applied in the study of distillation a concentration range from 0.01 to 0.15 mol/L of the surfactants (Ultranex- 18 and 50). The use of the nonionic surfactant increased the percentage of hydrocarbons in the range from 5 to 9 carbons in comparison to the process carried out without surfactant, and in some experimental conditions the fraction of light compounds in the distilled was over 700% compared to the conventional process. The study showed that increasing the degree of ethoxylation of Ultranex18 to Ultranex-50, the compounds in the range of C5 to C9 reduced the percentage in the distilled, since the increase of the hydrophilic part of the surfactant reduces its solubility in the oil. Finally, was obtained an increase in the degree of recovery of light hydrocarbons, comparing processes with and without surfactant, obtained an increase of 10% and 4% with Ultranex-18 and Ultranex-50, respectively. Thus, it is concluded that the Ultranex- 18 surfactant showed a higher capacity to distillation compared with Ultranex-50 and the application of surfactant on the molecular distillation from petroleum allowed for a greater recovery of light compounds in distillate
Resumo:
background. The prevalence of resistance to imipenem and ceftazidime among Pseudomonas aeruginosa isolates is increasing worldwide.objective. Risk factors for nosocomial recovery ( defined as the finding of culture- positive isolates after hospital admission) of imipenemresistant P. aeruginosa ( IRPA) and ceftazidime- resistant P. aeruginosa ( CRPA) were determined.design. Two separate case- control studies were conducted. Control subjects were matched to case patients ( ratio, 2: 1) on the basis of admission to the same ward at the same time as the case patient. Variables investigated included demographic characteristics, comorbid conditions, and the classes of antimicrobials used.setting. The study was conducted in a 400- bed general teaching hospital in Campinas, Brazil that has 14,500 admissions per year. Case patients and control subjects were selected from persons who were admitted to the hospital during 1992 - 2002.results. IRPA and CRPA isolates were obtained from 108 and 55 patients, respectively. Statistically significant risk factors for acquisition of IRPA were previous admission to another hospital ( odds ratio [ OR], 4.21 [ 95% confidence interval {CI}, 1.40- 12.66];), hemodialysis Pp. 01 ( OR, 7.79 [ 95% CI, 1.59- 38.16];), and therapy with imipenem ( OR, 18.51 [ 95% CI, 6.30- 54.43];), amikacin ( OR, 3.22 Pp. 01 P !.001 [ 95% CI, 1.40- 7.41];), and/ or vancomycin ( OR, 2.48 [ 95% CI, 1.08- 5.64];). Risk factors for recovery of CRPA were Pp. 005 Pp. 03 previous admission to another hospital ( OR, 18.69 [ 95% CI, 2.00- 174.28];) and amikacin use ( OR, 3.69 [ 95% CI, 1.32- 10.35]; Pp. 01). Pp. 01conclusion. Our study suggests a definite role for several classes of antimicrobials as risk factors for recovery of IRPA but not for recovery of CRPA. Limiting the use of only imipenem and ceftazidime may not be a wise strategy to contain the spread of resistant P. aeruginosa strains.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The objective of the present study was to evaluate the effects of double uterine flushing on the recovery of embryos/ova in cattle. Two hundred and ten embryo recovery procedures were conducted using a double uterine flushing method, and the results were compared with 432 conventional single-flushing procedures. Cyclic Limousin (n = 403) and Guzera (n = 239) donor cows received an intravaginal progesterone releasing device and 2 mg of estradiol benzoate on Day 0. Between Days 5 and 9, donors received decreasing doses of FSH, which ranged from 200 to 300 IU (Bos indicus) and 300 to 500 IU (Bos taut-us). on the afternoon of Day 7, donors received an injection of 500 mu g cloprostenol and progesterone implants were removed 12 It later (morning of Day 8). Artificial insemination was performed between 14 and 26 h after first detection of behavioral estrus. Cows were randomly assigned to have embryos recovered by a double-flushing method (n = 210) or the conventional single-flushing procedure (n = 432). For the double-flushing procedure, after first flushing the whole uterus with 1 L of Dubelco's Phosphate Buffered Saline (DPBS), a Foley catheter was positioned in the uterine body to permit refilling of the uterus with fresh DPBS (80-150 mL). The catheter was closed with the plunger of a disposable 5 mL syringe, and the donors were allowed to rest in a holding area for 30 min. Thereafter, a second flush was performed to recover the solution remaining in the uterus. Animals from the control group were subjected to a single uterine flush. From 2 10 double-flushing procedures, 1409 viable embryos were recovered. In comparison, from 432 cows receiving the single-flushing procedure, 1993 embryos were recovered. Double flushing increased (P < 0.05) the number of embryos recovered per procedure compared to single flushing (6.7 +/- 0.4 versus 4.6 +/- 0.2, respectively; mean +/- S.E.M.). When double flushing was performed, average recovered embryos/ova increased (P < 0.05) from 8.3 +/- 0.4 to 12.7 +/- 0.7 in Limousin and from 7.9 to 11.5 in Guzera. Also, utilization of double flushing increased (P < 0.05) the number of viable embryos from 4.7 +/- 0.3 to 6.9 +/- 0.5 in Limousin and from 4.5 +/- 0.4 to 6.4 +/- 0.7 in Guzera. Mean total embryos/ova was similar (P > 0.05) between the control group and after the first uterine flushing in the double-flushing group; therefore, both flushings were conducted efficiently. In conclusion, double uterine flushing increased embryo recovery in cattle. (C) 2004 Elsevier B.V. All rights reserved.
Resumo:
The aim of this study was to compare the micromorphology of CVD diamond tips coupled to ultrasound with conventional high speed diamond tips after cavity preparations, and to measure the width and depth of the cavities obtained. Two hundred bovine teeth were divided into 20 subgroups. Each of the diamond tips (10 CVD and 10 conventional) were used to prepare 10 standardized cavities, using an apparatus that controlled the time (t: 27 s), speed (5.3 mm/s) and load (0.012 KGF) of the tip against the teeth during preparation. The unused and the used (after one, five and 10 preparations) tips were analyzed by scanning electronic microscopy. The images were randomly assessed by 3 examiners with regard to the presence or absence of micromorphologic alterations. Cavity measurements were made after visualization under a stereoscopic microscope. Cavity widths and depths were analyzed by the ANOVA Factorial test (p < 0.05). The CVD diamond tips presented less wear than the conventional tips after all the cavity preparations performed, but produced shallower cavities that were equivalent in width to those made by conventional tips after the fifth preparation. CVD diamond tips may be suggested as an alternative to conventional diamond tips due to their conservative preparation and greater longevity.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)