933 resultados para technology acceptance
Resumo:
The government is sitting on its hands when an overhaul of the patent system is necessary to keep up with advances in technology in the 21st century.
Resumo:
Apple Inc. has often portrayed itself as the champion of consumers, with its advertising campaigns on “1984”, “Think Different”, and “Rip, Mix, Burn”. However, this reputation has been called into question after Apple refused to appear before the Parliament’s inquiry into IT Pricing in Australia and explain its pricing policies in Australia.
Resumo:
This research investigates how to obtain accurate and reliable positioning results with global navigation satellite systems (GNSS). The work provides a theoretical framework for reliability control in GNSS carrier phase ambiguity resolution, which is the key technique for precise GNSS positioning in centimetre levels. The proposed approach includes identification and exclusion procedures of unreliable solutions and hypothesis tests, allowing the reliability of solutions to be controlled in the aspects of mathematical models, integer estimation and ambiguity acceptance tests. Extensive experimental results with both simulation and observed data sets effectively demonstrate the reliability performance characteristics based on the proposed theoretical framework and procedures.
Resumo:
The system for high utilization of LNG cold energy is proposed by use of process simulator. The proposed design is a closed loop system, and composed by a Hampson type heat exchanger, turbines, pumps and advanced humid air turbine (AHAT) or Gas turbine combined cycle (GTCC). Its heat sources are Boil-off gas and cooling water for AHAT or GTCC. The higher cold exergy recovery to power can be about 38 to 56% as compared to the existing cold power generation of about 20% with a Rankine cycle of a single component. The advantage of the proposed system is to reduce the number of heat exchangers. Furthermore, the environmental impact is minimized because the proposed design is a closed loop system. A life cycle comparative cost is calculated to demonstrate feasibility of the proposed design. The development of the Hampson type exchangers is expected to meet the key functional requirements and will result in much higher LNG cold exergy recovery and the overall system performance i.e. re-gasification. Additionally, the proposed design is expected to provide flexibility to meet different gas pressure suited for the deregulation of energy system in Japan and higher reliability for an integrated boil-off gas system.
Holistically approaching curriculum renewal: A case study of the Queensland University of Technology
Resumo:
There are still many programs in Australia and overseas where curricula comprise largely 20th Century-relevant graduate outcomes, framed in 20th Century learning and teaching approaches. A ‘Dynamic and Deliberative Model for Curriculum Renewal’ (DDMCR) model exists for undertaking such curriculum renewal that draws on the experiences of educators around the world, however there are few experiences to date in applying this model. At the Queensland University of Technology, the 2012 accreditation by Engineers Australia observed that, despite being exposed to relevant discipline-specific engineering curriculum and practice, students did not seem to be aware of the relevance of sustainable development to their degree, beyond first year exposure. In addressing this feedback, level 8 Australian Qualifications Framework, and drawing ideas from the DDMCR model, faculty senior management undertook a full review of the engineering curriculum.
Resumo:
This thesis presents the results of a study into ways that technology can be appropriated and designed to support urban rail commuters in their daily journeys. The study evaluated a mobile application prototype deployed along the Brisbane passenger rail network. This prototype was designed to support social interaction between passengers sharing the same trains. This thesis provides a step forward in showing the relevance of increasingly creating solutions that contribute to a more enjoyable and attractive public transport service.
Resumo:
This article presents the results of a single-day census of radiation therapy (RT) treatment and technology use in Australia. The primary aim of the study was to ascertain patterns of RT practice and technology in use across Australia. These data were primarily collated to inform curriculum development of academic programs, thereby ensuring that training is matched to workforce patterns of practice. Methods: The study design was a census method with all 59 RT centres in Australia being invited to provide quantitative summary data relating to patient case mix and technology use on a randomly selected but common date. Anonymous and demographic-free data were analysed using descriptive statistics. Results: Overall data were provided across all six Australian States by 29 centres of a possible 59, yielding a response rate of 49% and representing a total of 2743 patients. Findings from this study indicate the increasing use of emerging intensity-modulated radiotherapy (IMRT), image fusion and image-guided radiation therapy (IGRT) technology in Australian RT planning and delivery phases. IMRT in particular was used for 37% of patients, indicating a high uptake of the technology in Australia when compared to other published data. The results also highlight the resource-intensive nature of benign tumour radiotherapy. Conclusions: In the absence of routine national data collection, the single-day census method offers a relatively convenient means of measuring and tracking RT resource utilisation. Wider use of this tool has the potential to not only track trends in technology implementation but also inform evidence-based guidelines for referral and resource planning.
Resumo:
Introduction Behavioural interventions have been shown to improve outcomes in patients with type 1 diabetes mellitus (T1DM). There are a small number of studies that suggest text-messages (TM), native mobile applications (NMAs), and other mobile tools may be useful platforms for delivering behavioural interventions to adolescents. Aim The aim of this study was to explore, by way of a systematic review of available literature, (a) the outcomes of interventions using mobile technology for youth with T1DM and (b) what mobile technologies, functional design elements and aesthetic design elements have the best evidence to support their use. Methods A search of six online databases returned 196 unique results, of which 13 met the inclusion criteria. Results Four studies were randomised controlled trials (RCTs), and all others prospective cohort studies. TM (10) was the most common intervention technology, while NMAs were used in four studies. The most common outcome measured was HbA1c (9); however, only three studies showed a significant decrease. Similarly, the results reported for other outcome measures were mixed. The studies included in this review suggest that interventions which have data collection and clinician support functionality may be more effective in improving adherence and glycaemic control, but more evidence is needed. Further, the evidence base supporting the use of NMAs in T1DM management for adolescents is weak, with most studies adopting TM as the intervention tool. Overall, the studies lack adequate descriptions of their methodology, and better quality studies are required to inform future intervention design.
Resumo:
This research used design science research methods to develop, instantiate, implement, and measure the acceptance of a novel software artefact. The primary purpose of this software artefact was to enhance data collection, improve its quality and enable its capture in classroom environments without distracting from the teaching activity. The artefact set is an iOS app, with supporting web services and technologies designed in response to teacher and pastoral care needs. System analysis and design used Enterprise Architecture methods. The novel component of the iOS app implemented proximity detection to identify the student through their iPad and automatically link to that student's data. The use of this novel software artefact and web services was trialled in a school setting, measuring user acceptance and system utility. This integrated system was shown to improve the accuracy, consistency, completeness and timeliness of captured data and the utility of the input and reporting systems.
Resumo:
Phage display is an advanced technology that can be used to characterize the interactions of antibody with antigen at the molecular level. It provides valuable data when applied to the investigation of IgE interaction with allergens. The aim of this rostrum article is to provide an explanation of the potential of phage display for increasing the understanding of allergen- IgE interaction, the discovery of diagnostic reagents, and the development of novel therapeutics for the treatment of allergic disease. The significance of initial studies that have applied phage display technology in allergy research will be highlighted. Phage display has been used to clone human IgE to timothy grass pollen allergen Phl p 5, to characterize the epitopes for murine and human antibodies to a birch pollen allergen Bet v 1, and to elucidate the epitopes of a murine mAb to the house dust mite allergen Der p 1. The technology has identified peptides that functionally mimic sites of human IgE constant domains and that were used to raise antiserum for blocking binding of IgE to the FcεRI on basophils and subsequent release of histamine. Phage display has also been used to characterize novel peanut and fungal allergens. The method has been used to increase our understanding of the molecular basis of allergen-IgE interactions and to develop clinically relevant reagents with the pharmacologic potential to block the effector phase of allergic reactions. Many advances from these early studies are likely as phage display technology evolves and allergists gain expertise in its research applications.
Resumo:
The Australian construction industry is often criticized for its comparatively low productivity. The most significant future productivity gains are predicted to arise from improvement in the firm’s project management. Information Communication Technologies (ICTs) are thought to offer such improvement. ICT adoption is particularly poor among Small and Medium Enterprises (SMEs). Existing studies provide only a general overview of adoption and diffusion of ICTs in SMEs, with no previous research measuring their readiness to adopt ICT. This paper outlines a theoretical approach to address this gap, exploring how to improve ICT adoption in Australian construction SMEs. A review of literature is undertaken to address the research question ‘What is the best conceptual approach to understanding ICT adoption in SMEs?’ The results emphasize the efficacy of a novel Technology Readiness and Acceptance Model (TRAM) to assess SMEs’ ICT implementation readiness. The proposed model consists of four major constructs to measure readiness comprising: - (1) optimism, - (2) innovativeness, - (3) discomfort and - (4) insecurity; two major constructs to measure technological acceptance comprising: - (1) perceived ease of use and - (2) perceived usefulness; and two extension variables comprising: - (1) self-efficacy and - (2) facilitating conditions. A limitation is that the performance of the conceptual model is yet to be tested empirically. Such research is planned in the coming year by the authors.
Resumo:
Mobile devices are very popular among tertiary student populations. This study looks at student use of hand-held mobile devices within the context of a first year programming unit. This research sought for ways in which an educational app on these devices could be successfully integrated into such a class's learning.
Resumo:
Purpose This paper aims to use the Model of Goal-Directed Behavior (MGB) to examine the factors affecting consumers’ continued use of emerging technology-based self-services (TBSSs) with credence qualities. Professional services, which traditionally require specialized knowledge and high levels of interpersonal interaction to produce owing to their credence qualities, are increasingly delivered via self-service technologies. Health services delivered via mobile devices, for example, facilitate self-care without direct involvement from health professionals. Design/methodology/approach A mental health service delivered via the Internet and mobile phone, myCompass, was selected as the research context. Twenty interviews were conducted with users of myCompass and the data were thematically analyzed. Findings The findings of the study showcase the unique determinants of consumers’ continued use of TBSSs with credence qualities relative to the more routine services which have been the focus of extant research. The findings further provide support for the utility of the MGB in explaining service continuance, although the importance of distinguishing between extrinsic and intrinsic motivational components of behavioral desire and capturing the impact of social influence beyond subjective norms is also highlighted. Originality/value This study contributes to recent research examining differences in consumer responses across TBSSs and behavioral loyalty to these services. It also provides empirical evidence for broadening and deepening the MGB within this behavioral domain.
Resumo:
This action research study investigated face-to-face and wiki technology collaboration to enhance students' English writing skills in a second language (L2) class in Vietnam. The thesis is underpinned by socio-cultural theory and argues that collaborative learning using wikis led to an enhancement in L2 writing skills. The findings show that collaborating via wikis challenged traditional L2 writing pedagogy in the following ways: increased student autonomy; understanding formative feedback; and awareness of process writing, genre and audiences. This study contributes practical knowledge about affordances and constraints of collaborative writing using wikis in Vietnam and other countries where traditional pedagogies are prevalent.