The Pierre Auger Observatory scaler mode for the study of solar activity modulation of galactic cosmic rays

Since data-taking began in January 2004, the Pierre Auger Observatory has been recording the count rates of low energy secondary cosmic ray particles for the self-calibration of the ground detectors of its surface detector array. After correcting for atmospheric effects, modulations of galactic cosmic rays due to solar activity and transient events are observed. Temporal variations related with the activity of the heliosphere can be determined with high accuracy due to the high total count rates. In this study, the available data are presented together with an analysis focused on the observation of Forbush decreases, where a strong correlation with neutron monitor data is found.

A study of the effect of molecular and aerosol conditions in the atmosphere on air fluorescence measurements at the Pierre Auger Observatory

The air fluorescence detector of the Pierre Auger Observatory is designed to perforin calorimetric measurements of extensive air showers created by Cosmic rays of above 10(18) eV. To correct these measurements for the effects introduced by atmospheric fluctuations, the Observatory contains a group Of monitoring instruments to record atmospheric conditions across the detector site, ail area exceeding 3000 km(2). The atmospheric data are used extensively in the reconstruction of air showers, and are particularly important for the correct determination of shower energies and the depths of shower maxima. This paper contains a summary of the molecular and aerosol conditions measured at the Pierre Auger Observatory since the start of regular operations in 2004, and includes a discussion of the impact of these measurements oil air shower reconstructions. Between 10(18) and 10(20) eV, the systematic Uncertainties due to all atmospheric effects increase from 4% to 8% in measurements of shower energy, and 4 g cm(-2) to 8 g cm(-2) in measurements of the shower maximum. (C) 2010 Elsevier B.V. All rights reserved.

Comparative study of liponucleosides in Langmuir monolayers as cell membrane models

Liponucleosides may assist the anchoring of nucleic acid nitrogen bases into biological membranes for tailored nanobiotechnological applications. To this end precise knowledge about the biophysical and chemical details at the membrane surface is required. In this paper, we used Langmuir monolayers as simplified cell membrane models and studied the insertion of five lipidated nucleosides. These molecules varied in the type of the covalently attached lipid group, the nucleobase, and the number of hydrophobic moieties attached to the nucleoside. All five lipidated nucleosides were found to be surface-active and capable of forming stable monolayers. They could also be incorporated into dipalmitoylphosphatidylcholine (DPPC) monolayers, four of which induced expansion in the surface pressure isotherm and a decrease in the surface compression modulus of DPPC. In contrast, one nucleoside possessing three alkyl chain modifications formed very condensed monolayers and induced film condensation and an increase in the compression modulus for the DPPC monolayer, thus reflecting the importance of the ability of the nucleoside molecules to be arranged in a closely packed manner. The implications of these results lie on the possibility of tuning nucleic acid pairing by modifying structural characteristics of the liponucleosides. (C) 2010 Elsevier B.V. All rights reserved.

Experimental micromorphology in Tierra del Fuego (Argentina): building a reference collection for the study of shell middens in cold climates

Commonly used in archaeological contexts, micromorphology did not see a parallel advance in the field of experimental archaeology. Drawing from early work conducted in the 1990`s on ethnohistoric sites in the Beagle Channel, we analyze a set of 25 thin sections taken from control features and experimental tests. The control features include animal pathways and environmental contexts (beach samples, forest litter, soils from the proximities of archaeological sites), while the experimental samples comprise anthropic structures, such as hearths, and valves of Mytilus edulis (the most important component of shell middens in the region) heated from 200 degrees C to 800 degrees C. Their micromorphological study constitutes a modern analogue to assist archaeologists studying site formation and ethnographical settings in cold climates, with particular emphasis on shell midden contexts. (c) 2010 Elsevier Ltd. All rights reserved.

Surface active ionic liquids: Study of the micellar properties of 1-(1-alkyl)-3-methylimidazolium chlorides and comparison with structurally related surfactants

The impetus for the increasing interest in studying surface active ionic liquids (SAILs; ionic liquids with long-chain ""tails"") is the enormous potential for their applications, e.g., in nanotechnology and biomedicine. The progress in these fields rests on understanding the relationship between surfactant structure and solution properties, hence applications. This need has prompted us to extend our previous study on 1-(1-hexadecyl)-3-methylimidazolium chloride to 1-(1-alkyl)-3-methylimidazolium chlorides, with alkyl chains containing 10, 12, and 14 carbons. In addition to investigating relevant micellar properties, we have compared the solution properties of the imidazolium-based surfactants with: 1-(1-alkyl)pyridinium chlorides, and benzyl (2-acylaminoethyl)dimethylammonium chlorides. The former series carries a heterocyclic ring head-group, but does not possess a hydrogen that is as acidic as H2 of the imidazolium ring. The latter series carries an aromatic ring, a quaternary nitrogen and (a hydrogen-bond forming) amide group. The properties of the imidazolium and pyridinium surfactants were determined in the temperature range from 15 to 75 degrees C. The techniques employed were conductivity, isothermal titration calorimetry, and static light scattering. The results showed the important effects of the interactions in the interfacial region on the micellar properties over the temperature range studied. (C) 2011 Elsevier Inc. All rights reserved.

Study of electrochemical behavior of azoles for AISI 430 stainless steel in H(2)SO(4) 1 mol L(-1)

Corrosion is an undesirable process that occurs in metallic materials. Studied was the effect of inhibiting Benzotriazole (BTAH), Benzimidazole (BZM) and Indole in different concentrations-for the stainless steel (SS) AISI 430 in H(2)SO(4) mol The techniques employed this research were: anodic potenciostatic polarisation, electrochemical impedance spectroscopy, optical microscopy and scanning electron microscopy The curves of anodic polarisation showed that BTAH, BZM and Indol act as corrosion inhibitors for 430 SS, at concentrations of 1x10(-3) and 5x10(-4) mol L(-1) but do not inhibit corrosion for concentrations equal to or less than 1x10(-4) mol L(-1). The in-crease of the efficiency in relation to the inhibitory substances studied followed this order: Indol

Print quality study of a laboratory offset press

PAPRO operates within the Forest Research company and their mission is to develop value-addingindustry solutions. At present there are no good ways for mills to easily test the printing quality on newsprintpaper. There is a great need for a fast way to do this on different paper qualities; with a laboratory-offset press this can be both a time and money saving method. At PAPRO Forest Research, NewZealand, a laboratory offset press has been developed and designed, during the past seven years, concerningthis issue. Earlier projects were made concerning the press, e.g. to establish the optimal settings.The mission with this project was to partly determine the present variability of the print quality andto evaluate if the fountain solution, distilled water and 2% Diol green concentrate, used at the momentmixed with different percentages of Isopropanol could decrease the variability and contribute to morestabile results. Throughout the whole project the print quality showed a high variation and was evenmore variable when the Isopropanol was added. All in all 50 print rounds times twelve printed paperstrips was carried out through the project divided into three parts. To analyse the print quality, amicroscope with an image capture camera has been used. Data from the taken images was analysedand inserted into charts to see the variations.The conclusions of the whole project are not satisfying because no final evaluations were possible tomake. Main conclusions are that the additive of Isopropanol to the ordinary fountain solution, used atpresent, only contributed to more unstable results of the print quality. And it seems to be difficult toget some stable results from the lab press as long as the room where it is placed is not fully conditionedas required for the process of offset printing. And the fact that the airbrush which applies theamount of fountain solution is also variable, as shown in earlier projects, which contributes to unstableresults as well. For further work more exact parameters as a conditioned room are required and thepossibility to further design the laboratory press to use waterless offset printing instead.

ANALYSIS & STUDY OF AI TECHNIQUES FORAUTOMATIC CONDITION MONITORING OFRAILWAY TRACK INFRASTRUCTURE : Artificial Intelligence Techniques

Since the last decade the problem of surface inspection has been receiving great attention from the scientific community, the quality control and the maintenance of products are key points in several industrial applications.The railway associations spent much money to check the railway infrastructure. The railway infrastructure is a particular field in which the periodical surface inspection can help the operator to prevent critical situations. The maintenance and monitoring of this infrastructure is an important aspect for railway association.That is why the surface inspection of railway also makes importance to the railroad authority to investigate track components, identify problems and finding out the way that how to solve these problems. In railway industry, usually the problems find in railway sleepers, overhead, fastener, rail head, switching and crossing and in ballast section as well. In this thesis work, I have reviewed some research papers based on AI techniques together with NDT techniques which are able to collect data from the test object without making any damage. The research works which I have reviewed and demonstrated that by adopting the AI based system, it is almost possible to solve all the problems and this system is very much reliable and efficient for diagnose problems of this transportation domain. I have reviewed solutions provided by different companies based on AI techniques, their products and reviewed some white papers provided by some of those companies. AI based techniques likemachine vision, stereo vision, laser based techniques and neural network are used in most cases to solve the problems which are performed by the railway engineers.The problems in railway handled by the AI based techniques performed by NDT approach which is a very broad, interdisciplinary field that plays a critical role in assuring that structural components and systems perform their function in a reliable and cost effective fashion. The NDT approach ensures the uniformity, quality and serviceability of materials without causing any damage of that materials is being tested. This testing methods use some way to test product like, Visual and Optical testing, Radiography, Magnetic particle testing, Ultrasonic testing, Penetrate testing, electro mechanic testing and acoustic emission testing etc. The inspection procedure has done periodically because of better maintenance. This inspection procedure done by the railway engineers manually with the aid of AI based techniques.The main idea of thesis work is to demonstrate how the problems can be reduced of thistransportation area based on the works done by different researchers and companies. And I have also provided some ideas and comments according to those works and trying to provide some proposal to use better inspection method where it is needed.The scope of this thesis work is automatic interpretation of data from NDT, with the goal of detecting flaws accurately and efficiently. AI techniques such as neural networks, machine vision, knowledge-based systems and fuzzy logic were applied to a wide spectrum of problems in this area. Another scope is to provide an insight into possible research methods concerning railway sleeper, fastener, ballast and overhead inspection by automatic interpretation of data.In this thesis work, I have discussed about problems which are arise in railway sleepers,fastener, and overhead and ballasted track. For this reason I have reviewed some research papers related with these areas and demonstrated how their systems works and the results of those systems. After all the demonstrations were taking place of the advantages of using AI techniques in contrast with those manual systems exist previously.This work aims to summarize the findings of a large number of research papers deploying artificial intelligence (AI) techniques for the automatic interpretation of data from nondestructive testing (NDT). Problems in rail transport domain are mainly discussed in this work. The overall work of this paper goes to the inspection of railway sleepers, fastener, ballast and overhead.

Gender Equality a case study of Sweden : Gender Equality Gender Equity and policies of combating inequality at workplace to make the society equal.

The paper analyses Gender Equality, Gender Equity and policies of combating inequality at workplace to make the society equal as a case study of Sweden. The aim of paper is see the gender equality, gender equity, discrimination against women at workplace and to describe the policies combating inequality in the welfare state of Sweden. This work highlights the gender equality in terms of institutionalizing gender equality, gender equity, gender and pay gap, parental leave, gender and the pension system and sexual behavior directed towards women and policies combating inequality to bring equality in society. For my research I used the secondary data the fact sheets, scientific literature, statistics from eurostate of Sweden and case studies about Swedish society and the theoretical explanation to explain the phenomena. To achieve my aim I used the combination of both qualitative and quantitative methods of research. I showed the empirical evidences of these phenomena from the Swedish society and theoretical analysis about equality and equity of gender in different wakes of life. I found an interesting conclusion that there are good policies and legislation to combat inequality to bring society but there are no policies to change the perception of society about male and female role.

Contemporary Approaches to Translation in the Classroom : A study of students' Attitudes and Strategies

The purpose of this study is to explore the strategies and attitudes of students towards translation in the context of language learning. The informants come from two different classes at an Upper Secondary vocational program. The study was born from the backdrop of discussions among some English teachers representing different theories on translation and language learning, meeting students endeavoring in language learning beyond the confinement of the classroom and personal experiences of translation in language learning. The curriculum and course plan for English at the vocational program emphasize two things of particular interest to our study; integration of the program outcomes and vocational language into the English course - so called meshed learning – and student awareness of their own learning processes. A background is presented of different contrasting methods in translation and language learning that is relevant to our discussion. However, focus is given to contemporary research on reforms within the Comparative Theory, as expressed in Translation in Language and Teaching (TILT), Contrastive Analysis and “The Third Space”. The results of the students’ reflections are presented as attempts to translate two different texts; one lyric and one technical vocational text. The results show a pragmatic attitude among the students toward tools like dictionaries or Google Translate, but also a critical awareness about their use and limits. They appear to prefer the use of first language to the target language when discussing the correct translation as they sought accuracy over meaning. Translation for them was a natural and problem-solving event worth a rightful place in language teaching.

Brand Awareness among Customers : A case study of ICA-Kvantum

This research paper has been prepared by Bachelor students from Dalarna University in Borlänge. The project is centered on a case study of ICA – Kvantum and its brand awareness among customers. The purpose of this study is to find out that which measures can help ICA-Kvantum to create brand awareness among its current and potential customers by looking in to the importance of information of its offerings and use of effective communication tools to convey this information. Further, to recommend them what they need to do, to increase brand awareness among their customers with the help of managerial implications. The research question was formulated as what actions could be seen effective for ICA-Kvantum to maintain or improve brand awareness among its current and potential customers.The project was created with the help of theoretical concepts of brand awareness, brand loyalty, perceived quality, consumer decision model, integrated marketing communication approach and strategic planning process. These theories were applied in this thesis in order to find out the most effective communication measures to maintain or improve brand awareness among current and potential customers of ICA-Kvantum.The primary and secondary data was collected. Primary data was gathered through the survey among ICA-Kvantum customers in the front of the store in Borlänge. The personal interview with manager was conducted in the office of ICA-Kvantum store located in Borlänge. Secondary data was gathered from textbooks, academic journals, theses and websites.The empirical findings have been presented in detail and then analyzed with the help of theoretical concepts. The analysis and further results from survey and interview focused on importance of information, marketing communication tools, brand awareness and loyalty, perceived quality and implementation of strategic planning process. Moreover, the main weaknesses and strengths of ICA-Kvantun have been evaluated. The conclusion including short summary of analysis and its results have been provided at the end. Each weakness of issues related to brand awareness i.e. importance of information, effectiveness of marketing communication tools and strengths and weaknesses of ICA-Kvantum discussed in the paper, has been pointed out along with solutions and managerial implications.

Baking Dalarna's biking cake : Collaboration as a means for destination competitiveness, a case study of “Biking Dalarna"

In the contemporary tourism industry, the competitive game is between destinations. Tourism operations struggle to remain competitive on the international market and their success depends to a large extent on other complementary and competing tourism organizations at the destination. It is the sum of the total tourism offerings at the destination which determines its attractiveness. This research explores tourism collaboration process as a means of generating destination competitiveness. The focus of the research is on the enhancing factors which contribute to the success of the collaboration and to the development of quality tourism products. The research studies the case of Biking Dalarna, a collaboration of different organizations at five biking destinations in Dalarna, Sweden. Its purpose is to develop biking tourism in the region and to make Dalarna into Sweden’s leading biking destination. It is a qualitative research; the empirical data was collected through in depth interviews with representatives of six Biking Dalarna member organizations. The qualitative data collected from the participants provides inside look into the members reflections and experience of collaborating. The findings of this research demonstrate how collaboration has improved the biking product in Dalarna and promoted solutions to development problems. The research finds the good relationship between the collaborating actors and the involvement and leadership of the regional tourism management organization as the most contributing factors to the success of Biking Dalarna. The research also suggests that a third desired outcome of collaboration, improved marketing attributes was yet to be achieved in the case of Biking Dalarna.

International conference site selection criteria : And a case study of Stockholm as an international conference city

The purpose of this thesis is to identify the destination site selection criteria for internationalconferences from the perspectives of the three main players of the conference industry,conference buyers (organizers and delegates) and suppliers. Additionally, the researchidentifies the strengths and weaknesses of the congress cities of Stockholm and Vienna.Through a comparison with Vienna, the top city for hosting international conferences, a roadmap for Stockholm has been designed, to strengthen its congress tourism opportunities, thus,obtaining a higher status as an international congress city. This qualitative research hascombined both primary and secondary data methods, through semi-standardized expertinterviews and secondary studies respectively, to fulfil the study’s aim. The data have beenanalysed by applying the techniques of qualitative content analysis; the secondary dataadopting an inductive approach according to Mayring (2003) while the expert interviewsusing a deductive approach according to Meuser & Nagel (2009). The conclusions of thesecondary data have been further compared and contrasted with the outcomes of the primarydata, to propose fresh discoveries, clarifications, and concepts related to the site selectioncriteria for international conferences, and for the congress tourism industry of Stockholm. Theresearch discusses the discoveries of the site selection criteria, the implications of thestrengths and weaknesses of Stockholm in comparison to Vienna, recommendations forStockholm via a road map, and future research areas in detail. The findings andrecommendation, not only provide specific steps and inceptions that Stockholm as aninternational conference city can apply, but also propose findings, which can aid conferencebuyers and suppliers to cooperate, to strengthen their marketing strategies and developsuccessful international conferences and destinations to help achieve a greater competitiveadvantage.

Part-time employment within the Swedish retail business : – A study of part-time employment from a management perspective

Research question: How has the presence of PT employees affected the role of managers in the Swedish food retail business? Research purpose: The purpose of this paper was to describe the change that accompanies part-time employment from a management perspective, and particularly, describe how the presence of part-time employment has influenced the role of the manager within the Swedish food retail business. Conceptual framework: The main focused in this chapter is directed towards the role of managers. The basis of the conceptual framework consist of the model developed by Mintzberg including the ten managerial roles and Quinn's eight leadership roles and how the presence of PT employments might affect these roles. Methodology: In this paper, the authors adopted a qualitative design and used narrative inquiry as a research strategy in order to gain a deep understanding of the context. Semi- structured interviews have been collected through a self-selection sampling and the total number of participants was ten. Conclusions: Based on the findings of this paper the presence of PT employees have not influenced and changed the role of managers. The changes that have influenced and caused the change of the role of the managers constitutes of the increased workload, the delegations of tasks and responsibilities, changed positions, the change of the organisational structure of the individual store, and the increased workforce.

Teaching grammar: A study of the common English grammar errors and grammar teaching methods that can be relevant for Swedish upper secondary schools

Grammar has always been an important part of language learning. Based on various theories, such as the universal grammar theory (Chomsky, 1959) and, the input theory (Krashen, 1970), the explicit and implicit teaching methods have been developed. Research shows that both methods may have some benefits and disadvantages. The attitude towards English grammar teaching methods in schools has also changed and nowadays grammar teaching methods and learning strategies, as a part of language mastery, are one of the discussion topics among linguists. This study focuses on teacher and learner experiences and beliefs about teaching English grammar and difficulties learners may face. The aim of the study is to conduct a literature review and to find out what scientific knowledge exists concerning the previously named topics. Along with this, the relevant steering documents are investigated focusing on grammar teaching at Swedish upper secondary schools. The universal grammar theory of Chomsky as well as Krashen’s input hypotheses provide the theoretical background for the current study. The study has been conducted applying qualitative and quantitative methods. The systematic search in four databases LIBRIS, ERIK, LLBA and Google Scholar were used for collecting relevant publications. The result shows that scientists’ publications name different grammar areas that are perceived as problematic for learners all over the world. The most common explanation of these difficulties is the influence of learner L1. Research presents teachers’ and learners’ beliefs to the benefits of grammar teaching methods. An effective combination of teaching methods needs to be done to fit learners’ expectations and individual needs. Together, they will contribute to the achieving of higher language proficiency levels and, therefore, they can be successfully applied at Swedish upper secondary schools.