Non-destructive evaluation of carrier transport properties in CuInS2 and CuInSe2 thin films using photothermal deflection technique

Photothermal deflection technique (PTD) is a non-destructive tool for measuring the temperature distribution in and around a sample, due to various non-radiative decay processes occurring within the material. This tool was used to measure the carrier transport properties of CuInS2 and CuInSe2 thin films. Films with thickness <1 μm were prepared with different Cu/In ratios to vary the electrical properties. The surface recombination velocity was least for Cu-rich films (5×105 cm/s for CuInS2, 1×103 cm/s for CuInSe2), while stoichiometric films exhibited high mobility (0.6 cm2/V s for CuInS2, 32 cm2/V s for CuInSe2) and high minority carrier lifetime (0.35 μs for CuInS2, 12 μs for CuInSe2

Optimization of parameters of chemical spray pyrolysis technique to get n and p-type layers of SnS

SnS thin films were prepared using automated chemical spray pyrolysis (CSP) technique. Single-phase, p-type, stoichiometric, SnS films with direct band gap of 1.33 eV and having very high absorption coefficient (N105/cm) were deposited at substrate temperature of 375 °C. The role of substrate temperature in determining the optoelectronic and structural properties of SnS films was established and concentration ratios of anionic and cationic precursor solutions were optimized. n-type SnS samples were also prepared using CSP technique at the same substrate temperature of 375 °C, which facilitates sequential deposition of SnS homojunction. A comprehensive analysis of both types of films was done using x-ray diffraction, energy dispersive x-ray analysis, scanning electron microscopy, atomic force microscopy, optical absorption and electrical measurements. Deposition temperatures required for growth of other binary sulfide phases of tin such as SnS2, Sn2S3 were also determined

CuInS2/In2S3 Cells using a Cost-effective Technique: Significance of Precursor Ratios on Cell Parameters

Thin film solar cells having structure CuInS2/In2S3 were fabricated using chemical spray pyrolysis (CSP) technique over ITO coated glass. Top electrode was silver film (area 0.05 cm2). Cu/In ratio and S/Cu in the precursor solution for CuInS2 were fixed as 1.2 and 5 respectively. In/S ratio in the precursor solution for In2S3 was fixed as 1.2/8. An efficiency of 0.6% (fill factor -37.6%) was obtained. Cu diffusion to the In2S3 layer, which deteriorates junction properties, is inevitable in CuInS2/In2S3 cell. So to decrease this effect and to ensure a Cu-free In2S3 layer at the top of the cell, Cu/In ratio was reduced to 1. Then a remarkable increase in short circuit current density was occurred from 3 mA/cm2 to 14.8 mA/cm2 and an efficiency of 2.13% was achieved. Also when In/S ratio was altered to 1.2/12, the short circuit current density increased to 17.8 mA/cm2 with an improved fill factor of 32% and efficiency remaining as 2%. Thus Cu/In and In/S ratios in the precursor solutions play a crucial role in determining the cell parameters

Reliable and Damage-Free Estimation of Resistivity of ZnO Thin Films for Photovoltaic Applications Using Photoluminescence Technique

This work projects photoluminescence (PL) as an alternative technique to estimate the order of resistivity of zinc oxide (ZnO) thin films. ZnO thin films, deposited using chemical spray pyrolysis (CSP) by varying the deposition parameters like solvent, spray rate, pH of precursor, and so forth, have been used for this study. Variation in the deposition conditions has tremendous impact on the luminescence properties as well as resistivity. Two emissions could be recorded for all samples—the near band edge emission (NBE) at 380 nm and the deep level emission (DLE) at ∼500 nm which are competing in nature. It is observed that the ratio of intensities of DLE to NBE ( DLE/ NBE) can be reduced by controlling oxygen incorporation in the sample. - measurements indicate that restricting oxygen incorporation reduces resistivity considerably. Variation of DLE/ NBE and resistivity for samples prepared under different deposition conditions is similar in nature. DLE/ NBE was always less than resistivity by an order for all samples.Thus from PL measurements alone, the order of resistivity of the samples can be estimated.

A STUDY OF THE TECHNIQUE OF THE HINDI DRAMA POST PRASAD PERIOD (1935 - 1965)

Hindi

THE PDETICAL WORKS DF GIRI-IA KUMAR MATHUR: SENSIBILITY AND TECHNIQUE

HINDI

A pilot investigation of the relationship between climate variability and milk compounds under the bootstrap technique

This study analyzes the linear relationship between climate variables and milk components in Iran by applying bootstrapping to include and assess the uncertainty. The climate parameters, Temperature Humidity Index (THI) and Equivalent Temperature Index (ETI) are computed from the NASA-Modern Era Retrospective-Analysis for Research and Applications (NASA-MERRA) reanalysis (2002–2010). Milk data for fat, protein (measured on fresh matter bases), and milk yield are taken from 936,227 milk records for the same period, using cows fed by natural pasture from April to September. Confidence intervals for the regression model are calculated using the bootstrap technique. This method is applied to the original times series, generating statistically equivalent surrogate samples. As a result, despite the short time data and the related uncertainties, an interesting behavior of the relationships between milk compound and the climate parameters is visible. During spring only, a weak dependency of milk yield and climate variations is obvious, while fat and protein concentrations show reasonable correlations. In summer, milk yield shows a similar level of relationship with ETI, but not with temperature and THI. We suggest this methodology for studies in the field of the impacts of climate change and agriculture, also environment and food with short-term data.

Study on Granular Dynamics in Vertically Vibrated Beds using Tracking Technique

The study of granular material is of great interest to many researchers in both engineering and science communities. The importance of such a study derives from its complex rheological character and also its significant role in a wide range of industrial applications, such as coal, food, plastics, pharmaceutical, powder metallurgy and mineral processing. A number of recent reports have been focused on the physics of non-cohesive granular material submitted to vertical vibration in either experimental or theoretical approaches. Such a kind of system can be used to separate, mix and dry granular materials in industries. It exhibits different instability behaviour on its surface when under vertical vibration, for example, avalanching, surface fluidization and surface wave, and these phenomena have attracted particular interest of many researchers. However, its fundamental understanding of the instability mechanism is not yet well-understood. This paper is therefore to study the dynamics of granular motion in such a kind of system using Positron Emission Particle Tracking (PEPT), which allows the motion of a single tracer particle to be followed in a non-invasive way. Features of the solids motion such as cycle frequency and dispersion index were investigated via means of authors’ specially-written programmes. Regardless of the surface behaviour, particles are found to travel in rotational movement in horizontal plane. Particle cycle frequency is found to increase strongly with increasing vibration amplitude. Particle dispersion also increased strongly with vibration amplitude. Horizontal dispersion is observed to always exceed vertical dispersion.

Implementation of a robust coded structured light technique for dynamic 3D measurements

This paper presents the implementation details of a coded structured light system for rapid shape acquisition of unknown surfaces. Such techniques are based on the projection of patterns onto a measuring surface and grabbing images of every projection with a camera. Analyzing the pattern deformations that appear in the images, 3D information of the surface can be calculated. The implemented technique projects a unique pattern so that it can be used to measure moving surfaces. The structure of the pattern is a grid where the color of the slits are selected using a De Bruijn sequence. Moreover, since both axis of the pattern are coded, the cross points of the grid have two codewords (which permits to reconstruct them very precisely), while pixels belonging to horizontal and vertical slits have also a codeword. Different sets of colors are used for horizontal and vertical slits, so the resulting pattern is invariant to rotation. Therefore, the alignment constraint between camera and projector considered by a lot of authors is not necessary

Exam preparation - Technique

These slides give general tips on exam technique in the context of feedback from a previous exam the students took

Coloraciones histológicas vs microscopia electrónica de transmision para detección de Biopeliculas en pacientes con Rinosinusitis Crónica en el Hospital Universitario de la Samaritana en el año 2011

Objetivo: Determinar la concordancia entre microscopia de luz vs microscopia electrónica de transmisión para la detección de Biopeliculas en pacientes con Rinosinusitis Crónica Diseño: Estudio de concordancia. Materiales y Métodos: Analizamos 34 muestras de pacientes llevados a Cirugía Endoscópica Funcional por Rinosinusitis Crónica. Fueron procesadas para valoración mediante microscopia de luz usando Hematoxilina-Eosina, Gram, Acido Peryódico de Schiff, Giemsa y Microscopia Electrónica de Transmisión (MET). Resultados: No se identificaron Biopelícula en ninguna de las muestras analizadas bajo Microscopía Electrónica de Transmisión (MET), estos resultados son concordantes con los resultados obtenidos con las coloraciones histológicas Hematoxilina-Eosina (H-E), Gram, Giemsa y Acido Peryódico de Schiff (PAS), mostrando una concordancia absoluta con test de Kappa para resultados negativos del 100%. Conclusión: Existe una alta concordancia entre los hallazgos observados entre la MET y la Microscopia de luz para los resultados negativos

Implementation of ‘School Back’ by the ‘Core’ technique in a factory of geotextiles to prevent back pain

Introduction: This article aims to show an alternative intervention for the prevention and control of back pain to the people of a production plant of geotextiles for the construction exposed to handling and awkward postures through the implementation of the Back School using the CORE technique. This technique being understood as trainer of the stability musculature of the spine; whose benefit is proportionate the muscular complex of the back, stability and avoid osteomuscular lesions and improved posture. Objective: To present the results about the implementation of the back school by the CORE technique for prevention of back pain in a population of forty-eight male collaborators. Materials and methods: The back school began with talks of awareness by the occupational health physician explaining the objectives and benefits of it to all participants. Once this activity was done, was continued to evaluate all plant employees to establish health status through the PAR-Q questionnaire, who were surveyed for the perception of pain using visual analog scale (VAS) and stability was determined column through the CORE assessment, to determine the training plan. Then, were made every six months the revaluations and implementation of a survey of assistant public perception to identify the impact of the implementation of the school back on the two variables referred (pain perception and stability of column). Results: The pain perception according VAS increased in the number of workers asymptomatic in 12% and based in the satisfaction survey 94% of population reported that with the development of this technique decrease the muscle fatigue in lumbar level; and 96% of population reported an improvement in the performance of their work activities. Discussion: Posterior to the analysis of all results, it is interpreted that back schools practice through CORE technique, contributes to the prevention and / or control of symptoms at the lumbar level in population of productive sector exposed to risks derived from the physical load, provided that ensure its continuously development and supervised for a competent professional.

Verbal reasoning : technique and practice 1.

Dirigido a alumnos de enseñanza secundaria, presenta la técnica y la práctica para la resolución de ejercicios de razonamiento verbal. Incluye trece de los treinta y cinco tipos de preguntas que se pueden encontrar en los exámenes oficiales (los volúmenes 2, 3 y 4 de la misma serie tratan los otros tipos) en el área de lengua. Para cada tipo de ejercicio explica el objetivo del mismo y la técnica que se debe seguir para su realización, con ejemplos y notas aclaratorias, y a continuación presenta un ejercicio práctico para aplicar dicha técnica. Al final del libro hay una tabla para apuntar los resultados de cada test y controlar el progreso del alumno, y un apartado con las soluciones.

El estudio de los roles y funciones de los orientadores de secundaria utilizando la técnica de los grupos de discusión. 'The study of duties and roles of highschool counsellors by using the technique of focus groups'.

Resumen tomado de la publicación. Con el apoyo económico del departamento MIDE de la UNED

The Use of Literature as an Advanced Technique for Teaching English in the EFL-ESL Classroom. 'El uso de la literatura como técnica avanzada para la enseñanza del inglés como segunda lengua en el aula'.

Monográfico con el título: 'Patrimonio y Educación'. Resumen basado en el de la publicación