Influence of constraining and confinement in the molecular mobility of low molecular weight materials

Dissertation presented to obtain a Ph.D. Degree in Chemical Physics

Multi-bit sigma-delta modulators with enhanced dynamic-range using non-linear DAC for hearing aids

15th IEEE International Conference on Electronics, Circuits and Systems, Malta

Arithmetic-based binary-to-RNS converter modulo {2(n)+/- k} for jn-Bit dynamic range

In this brief, a read-only-memoryless structure for binary-to-residue number system (RNS) conversion modulo {2(n) +/- k} is proposed. This structure is based only on adders and constant multipliers. This brief is motivated by the existing {2(n) +/- k} binary-to-RNS converters, which are particular inefficient for larger values of n. The experimental results obtained for 4n and 8n bits of dynamic range suggest that the proposed conversion structures are able to significantly improve the forward conversion efficiency, with an AT metric improvement above 100%, regarding the related state of the art. Delay improvements of 2.17 times with only 5% area increase can be achieved if a proper selection of the {2(n) +/- k} moduli is performed.

Trace metals in size-fractionated particulate matter in a Portuguese hospital: exposure risks assessment and comparisons with other countries

Hospitals are considered as a special and important type of indoor public place where air quality has significant impacts on potential health outcomes. Information on indoor air quality of these environments, concerning exposures to particulate matter (PM) and related toxicity, is limited though. This work aims to evaluate risks associated with inhalation exposure to ten toxic metals and chlorine (As, Ni, Cr, Cd, Pb, Mn, Se, Ba, Al, Si, and Cl) in coarse (PM2.5–10) and fine (PM2.5) particles in a Portuguese hospital in comparison with studies representative of other countries. Samples were collected during 1 month in one urban hospital; elemental PM characterization was determined by proton-induced X-ray emission. Noncarcinogenic and carcinogenic risks were assessed according to the methodology provided by the United States Environmental Protection Agency (USEPA; Region III Risk-Based Concentration Table) for three different age categories of hospital personnel (adults, >20, and <65 years) and patients (considering nine different age groups, i.e., children of 1–3 years to seniors of >65 years). The estimated noncarcinogenic risks due to occupational inhalation exposure to PM2.5-bound metals ranged from 5.88×10−6 for Se (adults, 55–64 years) to 9.35×10−1 for As (adults, 20–24 years) with total noncarcinogenic risks (sum of all metals) above the safe level for all three age categories. As and Cl (the latter due to its high abundances) were the most important contributors (approximately 90 %) to noncarcinogenic risks. For PM2.5–10, noncarcinogenic risks of all metals were acceptable to all age groups. Concerning carcinogenic risks, for Ni and Pb, they were negligible (<1×10−6) in both PM fractions for all age groups of hospital personnel; potential risks were observed for As and Cr with values in PM2.5 exceeding (up to 62 and 5 times, respectively) USEPA guideline across all age groups; for PM2.5–10, increased excess risks of As and Cr were observed particularly for long-term exposures (adults, 55–64 years). Total carcinogenic risks highly (up to 67 times) exceeded the recommended level for all age groups, thus clearly showing that occupational exposure to metals in fine particles pose significant risks. If the extensive working hours of hospital medical staff were considered, the respective noncarcinogenic and carcinogenic risks were increased, the latter for PM2.5 exceeding the USEPA cumulative guideline of 10−4. For adult patients, the estimated noncarcinogenic and carcinogenic risks were approximately three times higher than for personnel, with particular concerns observed for children and adolescents.

Large-area homogeneous periodic surface structures generated on the surface sputtered boron carbide thin films by femtosecond laser processing

Amorphous and crystalline sputtered boron carbide thin films have a very high hardness even surpassing that of bulk crystalline boron carbide (≈41 GPa). However, magnetron sputtered B-C films have high friction coefficients (C.o.F) which limit their industrial application. Nanopatterning of materials surfaces has been proposed as a solution to decrease the C.o.F. The contact area of the nanopatterned surfaces is decreased due to the nanometre size of the asperities which results in a significant reduction of adhesion and friction. In the present work, the surface of amorphous and polycrystalline B-C thin films deposited by magnetron sputtering was nanopatterned using infrared femtosecond laser radiation. Successive parallel laser tracks 10 μm apart were overlapped in order to obtain a processed area of about 3 mm2. Sinusoidal-like undulations with the same spatial period as the laser tracks were formed on the surface of the amorphous boron carbide films after laser processing. The undulations amplitude increases with increasing laser fluence. The formation of undulations with a 10 μm period was also observed on the surface of the crystalline boron carbide film processed with a pulse energy of 72 μJ. The amplitude of the undulations is about 10 times higher than in the amorphous films processed at the same pulse energy due to the higher roughness of the films and consequent increase in laser radiation absorption. LIPSS formation on the surface of the films was achieved for the three B-C films under study. However, LIPSS are formed under different circumstances. Processing of the amorphous films at low fluence (72 μJ) results in LIPSS formation only on localized spots on the film surface. LIPSS formation was also observed on the top of the undulations formed after laser processing with 78 μJ of the amorphous film deposited at 800 °C. Finally, large-area homogeneous LIPSS coverage of the boron carbide crystalline films surface was achieved within a large range of laser fluences although holes are also formed at higher laser fluences.

Size matters when we talk about corporate social responsibility: the case of portuguese companies

Social responsibility arises as a measure of the corporate policy that goes beyond the production activity, thus covering also the social and environmental activities. This issue has been gaining importance over time. The number of companies that are implementing socially responsible actions has been growing steadily even though it is still centered on large and medium sized companies. Social responsibility is an accessible theme to any company of any size, once the social and environmental issues are resolved through concrete actions, but in the small and micro-sized companies there are factors that inhibit such actions. Some of these factors are: reduced investment capacity; minimal expectations of medium to long term returns; or even the short-term management focus that is aimed at survival. Such facts can be verified in the case of Portuguese companies, where out of the 41 companies certified by SA 8000 only 5 are micro-sized or small and even these are linked to large organizations.

Visible range plasmonic effect produced by aluminium nanoparticles embedded in amorphous silicon

We present results, obtained by means of an analytic study and a numerical simulation, about the resonant condition necessary to produce a Localized Surface Plasmonic Resonance (LSPR) effect at the surface of metal nanospheres embedded in an amorphous silicon matrix. The study is based on a Lorentz dispersive model for a-Si:H permittivity and a Drude model for the metals. Considering the absorption spectra of a-Si:H, the best choice for the metal nanoparticles appears to be aluminium, indium or magnesium. No difference has been observed when considering a-SiC:H. Finite-difference time-domain (FDTD) simulation of an Al nanosphere embedded into an amorphous silicon matrix shows an increased scattering radius and the presence of LSPR induced by the metal/semiconductor interaction under green light (560 nm) illumination. Further results include the effect of the nanoparticles shape (nano-ellipsoids) in controlling the wavelength suitable to produce LSPR. It has been shown that is possible to produce LSPR in the red part of the visible spectrum (the most critical for a-Si:H solar cells applications in terms of light absorption enhancement) with aluminium nano-ellipsoids. As an additional results we may conclude that the double Lorentz-Lorenz model for the optical functions of a-Si:H is numerically stable in 3D simulations and can be used safely in the FDTD algorithm. A further simulation study is directed to determine an optimal spatial distribution of Al nanoparticles, with variable shapes, capable to enhance light absorption in the red part of the visible spectrum, exploiting light trapping and plasmonic effects. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Sinemurian ammonites of the Lusitanian Basin (Portugal): an example of complex endemic evolutioin

Palaeodiversity 3: 59–87; Stuttgart 30 December 2010

Dynamic Analysis and Pattern Visualization of Forest Fires

This paper analyses forest fires in the perspective of dynamical systems. Forest fires exhibit complex correlations in size, space and time, revealing features often present in complex systems, such as the absence of a characteristic length-scale, or the emergence of long range correlations and persistent memory. This study addresses a public domain forest fires catalogue, containing information of events for Portugal, during the period from 1980 up to 2012. The data is analysed in an annual basis, modelling the occurrences as sequences of Dirac impulses with amplitude proportional to the burnt area. First, we consider mutual information to correlate annual patterns. We use visualization trees, generated by hierarchical clustering algorithms, in order to compare and to extract relationships among the data. Second, we adopt the Multidimensional Scaling (MDS) visualization tool. MDS generates maps where each object corresponds to a point. Objects that are perceived to be similar to each other are placed on the map forming clusters. The results are analysed in order to extract relationships among the data and to identify forest fire patterns.

Electron driven reactions in complexes embedded in superfluid helium droplets

A thesis submitted to the University of Innsbruck for the doctor degree in Natural Sciences, Physics and New University of Lisbon for the doctor degree in Physics, Atomic and Molecular Physics

Aplicação da metodologia SMED numa linha de envernizamento/pintura de revestimentos de cortiça

O presente trabalho visa a redução do tempo de mudança de produção e consequente aumento de produtividade de uma linha de envernizamento/pintura integrada na empresa Amorim Revestimentos SA, unidade S. Paio de Oleiros, que se dedica à produção de pisos flutuantes. Esta necessidade surgiu pelo facto desta linha de produção ser um ponto de estrangulamento do processo produtivo no departamento em que está inserida, devido principalmente à diminuição do tamanho de lotes e aumento da variedade de artigos a produzir. O trabalho envolveu as várias etapas da ferramenta SMED às quais está inerente a aplicação da técnica 5S às máquinas e ferramentas garantindo, assim, o posto de trabalho arrumado, limpo, seguro e com tudo pronto a ser utilizado. Aplicou-se a ferramenta SMED a dois tipos de mudança de acabamento e à mudança de rolo de pintura. Após a implementação desta ferramenta verificou-se uma redução de tempos de 37% (48 para 30 minutos) na mudança de pintura e acabamento de verniz, reduziu-se 25% (32 para 24 minutos) na mudança só de pintura e 13% (46 para 40 minutos) na mudança de rolo de pintura. Estes resultados foram alcançados através da redução do tempo das tarefas externas e internas e transformação das tarefas internas em externas consequentes da aplicação de um conjunto de ações de melhorias. Também foi fundamental a alteração do método de trabalho e a organização geral do posto de trabalho, no que diz respeito à repartição equilibrada das tarefas pelos dois operadores, alteração do sequenciamento das tarefas e aplicação da técnica 5S. As soluções encontradas estão sendo monitorizadas através do registo efectuado pelos operadores e realização de auditorias internas para garantir a perpetuação dos resultados.

Gestão da cadeia de abastecimento de bens de consumo baseada em modelos de previsão lineares

Dissertação apresentada ao Instituto Politécnico do Porto para obtenção do Grau de Mestre em Logística

Chlorella sp. coagulation‐flocculation by inducing a modification on the pH broth medium

Dissertação apresentada à Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Bioenergia

Embolização das artérias prostáticas no tratamento da hiperplasia benigna da próstata : estudo anátomo-clínico

Resumo: A hiperplasia benigna da próstata (HBP) tem elevada prevalência nos homens entre os 50 e 79 anos de idade, sendo ubiquitária com o envelhecimento. Devido à significativa morbi-mortalidade associada aos tratamentos médicos e cirúrgicos currentemente disponíveis, são necessárias novas tecnologias para melhorar os resultados e minimizar o desconforto dos doentes. Recentemente, estudos preliminares de experimentação animal e em 3 doentes tratados, sugeriram a embolização arterial prostática selectiva (EAPS) como hipótese terapêutica para a HBP. Decidimos investigar se a EAPS poderia ser um procedimento bem sucedido no tratamento da HBP gravemente sintomática. Para tal realizámos um estudo anátomo-radiológico e clínico em 63 doentes com recurso a uma terapêutica inovadora minimamente invasiva guiada pela imagem. Avaliámos 126 hemipélvis com recurso a Angio-RM, Angio-TC e Angiografia Digital de Subtracção, com o intuito de definir os padrões básicos de bifurcação das artérias ilíacas internas até agora apenas descritos em estudos cadavéricos. Estudámos ainda o suprimento vascular arterial prostático, identificando: 1 as artérias prostáticas; 2 origem e direcção; 3 os ramos intra-prostáticos; 4 anastomoses com outras artérias. Em relação aos resultados anatómicos, identificámos 181 artérias prostáticas, já que em 43.7% das hemipélvis existiam dois pedículos arteriais prostáticos com origens independentes. A origem mais frequente foi a artéria pudenda interna (39.7%), seguida do tronco comum glúteo-pudendo (21%) e da artéria vesical superior (18.2%). Origens menos frequentes foram a artéria obturadora (12.1%), as artérias glúteas inferior (3.9%)ou superior (1.7%), ramos rectais provenientes da artéria mesentérica inferior (1.7%) e a artéria pudenda acessória (1.7%). Identificaram-se anastomoses com as artérias adjacentes em 57.9% dos casos: com a terminação da artéria pudenda interna (41.6%),artérias prostáticas contra-laterais (18.2%) e homo-laterais (11.7%), com ramos rectais (15.6%) e com artérias vesicais (12.9%). Em relação ao estudo clínico tratámos 63 doentes (idades compreendidas entre 52 - 82 anos, média 69.5 anos) com HBP gravemente sintomática refractária à terapêutica médica há mais de 6 meses. Foi possível avaliação após o tratamento em 37 doentes: média de seguimento de 4.7 meses (variando entre 1 e 12 meses). A EAPS unilateral foi possível em todos os doentes, com embolização bilateral em 73% dos casos. A embolização bilateral não foi possível em 27% dos casos devido a tortuosidade, alterações ateroescleróticas e pequeno calibre das artérias ilíacas e/ou prostáticas. Em média houve uma melhoria do International Prostate Symptom Score (IPSS) de 10.8 pontos, da QoL de 1.5 pontos e do Internationl Index of Erectile Function (IIEF) de 2.1 pontos. Houve uma redução média do PSA de 30% (2.4 ng/mL), um aumento do pico de fluxo urinário (Qmax) de 3.1 - 3.85 mL/s e uma redução média do volume prostático de 21% (18.5 mL). Registou-se uma complicação major: pequena área de isquémia da parede vesical tratada cirurgicamente. Em 75% dos doentes tratados obteve-se sucesso clínico com franca melhoria dos sintomas, enquanto 25% dos doentes foram considerados insucesso clínico por se ter registado uma fraca ou ausente melhoria sintomática após a embolização. Os restantes doentes tratados estão sob controlo evolutivo, pararam toda a medicação prostática, sem qualquer caso de disfunção sexual associada com o tratamento. Este trabalho constitui o primeiro estudo anatómico descritivo in vivo das artérias prostáticas, conseguido devido à utilização de técnicas de imagem nunca usadas para este fim. O uso clínico dos dados anatómicos acima referidos permitiu a implementação de técnicas de Radiologia de Intervenção no tratatamento de uma doença de elevada prevalência. ------------------------------- ABSTRACT: Benign prostatic hyperplasia (BPH) has high prevalence in men aged 50–79 years being ubiquitous with aging. Due to significant morbi-mortality associated with currently available medical and surgical treatments, there is the need for innovative technologies to continue to improve outcomes and minimize patient discomfort and morbidity. Recently, prostatic arterial embolization (PAE) was suggested as a treatmentoption for BPH based on preliminary results from animal studies and 3 treated patients. We decided to investigate if PAE might be a successful treatment option for severely symptomatic BPH patients. We performed a clinical and anatomical-radiological study in 63 patients with the use of an inovative image-guided minimally invasive technique. We evaluated 126 pelvic sides using Angio-MR or Angio-CT and Catheter Angiography before embolisation to treat symptomatic BPH. We aimed to define the main branching patterns of the male internal iliac arteries, so far only studied in the cadaver. We also evaluated the prostatic arterial supply, identifying: 1 the prostatic arteries; 2 origin and direction; 3 intra-prostatic branches; 4 anastomoses with surrounding arteries. Regarding the anatomical study we identified 181 prostatic arteries, because in 43.7% of pelvic sides 2 separate prostatic vascular pedicles were found. The most frequent origin was the internal pudendal artery (39.7%) with the common glutealpudendal trunk (21%) and superior vesical arteries (18.2%) the next commonest. Less frequent origins were the obturator artery (12.1%), the inferior (3.9%) or superior (1.7%) gluteal arteries, rectal branches from the inferior mesenteric artery (1.7%) and the accessory pudendal artery (1.7%). There were anastomoses with the surrounding arteries in 57.9% of cases: termination of the internal pudendal artery (41.6%), contralateral prostatic arteries (18.2%), same-side prostatic arteries (11.7%), rectal branches (15.6%), and vesical arteries (12.9%).Regarding the clinical study, we treated 63 patients aged 52–82 years (mean 69.5 years) who presented with symptomatic BPH refractory to medical treatment for at least 6 months. Follow-up evaluation (mean 4.7 months, range 1-12 months) was possible in 37 patients. PAE was achieved in all patients with bilateral embolization in 73%. In 27% PAE was performed unilaterally due to tortuosity, atherosclerotic changes and small size of iliac and prostatic arteries. There was a mean decrease in the IPSS of 10.8 points, a mean improvement in QoL of 1.5 points, and a mean increase in the sexual function score of 2.1 points. There was a mean PSA reduction of 30% (2.4 ng/mL), a Qmax increase of 3.1 to 3.85 mL/sec, and a mean prostate volume decrease of 21% (18.5 mL). There was one major complication: a small area of bladder wall ischemia treated by surgery. Overall, 75% of patients were considered clinical success with major improvement after PAE, while 25% of patients were considered clinical failure with little or no improvement after PAE. All remaining patients are under follow-up, stopped all prostatic medication, and reported no sexual dysfunction. This study is the first one to describe the radiological anatomy of the prostatic arteries, with the use of imaging techniques never used for this purpose before. The clinical use of the anatomical findings allowed the implementation of Interventional Radiology tehniques in the treatment of a disease with a high prevalence.