980 resultados para modified FCI test
Resumo:
Introduction Despite the known importance of Clostridium difficile as a nosocomial pathogen, few studies regarding Clostridium difficile infection (CDI) in Brazil have been conducted. To date, the diagnostic tests that are available on the Brazilian market for the diagnosis of CDI have not been evaluated. The aim of this study was to compare the performances of four commercial methods for the diagnosis of CDI in patients from a university hospital in Brazil. Methods Three enzyme immunoassays (EIAs) and one nucleic acid amplification test (NAAT) were evaluated against a cytotoxicity assay (CTA) and toxigenic culture (TC). Stool samples from 92 patients with suspected CDI were used in this study. Results Twenty-five (27.2%) of 92 samples were positive according to the CTA, and 23 (25%) were positive according to the TC. All EIAs and the NAAT test demonstrated sensitivities between 59 and 68% and specificities greater than 91%. Conclusions All four methods exhibited low sensitivities for the diagnosis of CDI, which could lead to a large number of false-negative results, an increased risk of cross-infection to other patients, and overtreatment with empirical antibiotics.
Resumo:
The Free and Cued Selective Reminding Test (FCSRT) is a memory test that controls attention and acquisition, by providing category cues in the learning process. Because it enables an assessment of memory not confounded by normal age-related changes in cognition and a high accuracy on Alzheimer's disease (AD) evaluation, it has been suggested by the International Working Group on AD. Our aim was to assess the construct related validity of the FCSRT in the AD spectrum disorders.
Resumo:
Abstract:INTRODUCTION:The Montenegro skin test (MST) has good clinical applicability and low cost for the diagnosis of American tegumentary leishmaniasis (ATL). However, no studies have validated the reference value (5mm) typically used to discriminate positive and negative results. We investigated MST results and evaluated its performance using different cut-off points.METHODS:The results of laboratory tests for 4,256 patients with suspected ATL were analyzed, and 1,182 individuals were found to fulfill the established criteria. Two groups were formed. The positive cutaneous leishmaniasis (PCL) group included patients with skin lesions and positive direct search for parasites (DS) results. The negative cutaneous leishmaniasis (NCL) group included patients with skin lesions with evolution up to 2 months, negative DS results, and negative indirect immunofluorescence assay results who were residents of urban areas that were reported to be probable sites of infection at domiciles and peridomiciles.RESULTS:The PCL and NCL groups included 769 and 413 individuals, respectively. The mean ± standard deviation MST in the PCL group was 12.62 ± 5.91mm [95% confidence interval (CI): 12.20-13.04], and that in the NCL group was 1.43 ± 2.17mm (95% CI: 1.23-1.63). Receiver-operating characteristic curve analysis indicated 97.4% sensitivity and 93.9% specificity for a cut-off of 5mm and 95.8% sensitivity and 97.1% specificity for a cut-off of 6mm.CONCLUSIONS:Either 5mm or 6mm could be used as the cut-off value for diagnosing ATL, as both values had high sensitivity and specificity.
Resumo:
Abstract: INTRODUCTION: The treatment of individuals with active tuberculosis (TB) and the identification and treatment of latent tuberculosis infection (LTBI) contacts are the two most important strategies for the control of TB. The objective of this study was compare the performance of tuberculin skin testing (TST) with QuantiFERON-TB Gold In TUBE(r) in the diagnosis of LTBI in contacts of patients with active TB. METHODS: Cross-sectional analytical study with 60 contacts of patients with active pulmonary TB. A blood sample of each contact was taken for interferon-gamma release assay (IGRA) and subsequently performed the TST. A receiver operating characteristic curve was generated to assess the cutoff points and the sensitivity, predictive values, and accuracy were calculated. The agreement between IGRA and TST results was evaluated by Kappa coefficient. RESULTS: Here, 67.9% sensitivity, 84.4% specificity, 79.1% PPV, 75% NPV, and 76.7% accuracy were observed for the 5mm cutoff point. The prevalence of LTBI determined by TST and IGRA was 40% and 46.7%, respectively. CONCLUSIONS: Both QuantiFERON-TB Gold In TUBE(r) and TST showed good performance in LTBI diagnosis. The creation of specific diagnostic methods is necessary for the diagnosis of LTBI with higher sensitivity and specificity, preferably with low cost and not require a return visit for reading because with early treatment of latent forms can prevent active TB.
Resumo:
Abstract: INTRODUCTION: Despite multidrug therapy, leprosy remains a public health issue. The intradermal Bacillus Calmette-Guérin (BCG) vaccine, Mitsuda test (lepromin skin test), and anti-phenolic glycolipid I (PGL-I) serology are widely used in leprosy studies and have shown great epidemiological value. METHODS: This longitudinal study evaluated the relative risks and benefits of these three tools by comparing results observed in household contacts (HHCs) of leprosy patients who developed leprosy with those of HHCs who did not in a population of 2,992 individuals monitored during a 10-year period. RESULTS : Seventy-five (2.5%) new leprosy cases were diagnosed, including 28 (0.9%) co-prevalent cases. Therefore, for the risk-benefit assessment, 47 (1.6%) HHCs were considered as truly diagnosed during follow-up. The comparison between healthy and affected contacts demonstrated that not only did BCG vaccination increase protection, but boosters also increased to 95% relative risk (RR) reduction when results for having two or more scars were compared with having no scars [RR, 0.0459; 95% confidence interval (CI), 0.006-0.338]. Similarly, Mitsuda reactions >7mm in induration presented 7-fold greater protection against disease development compared to reactions of 0-3mm (RR, 0.1446; 95% CI, 0.0566-0.3696). In contrast, anti-PGL-I ELISA seropositivity indicated a 5-fold RR increase for disease outcome (RR, 5.688; 95% CI, 3.2412-9.9824). The combined effect of no BCG scars, Mitsuda reaction of <7mm, and seropositivity to anti-PGL-I increased the risk for leprosy onset 8-fold (RR, 8.109; 95% CI, 5.1167-12.8511). CONCLUSIONS: The adoption of these combined assays may impose measures for leprosy control strategies.
Resumo:
PURPOSE: To review the medical literature regarding the histopathologic and biochemical liver test abnormalities in chronic asymptomatic or oligosymptomatic alcoholics. METHODS: Review of articles in the MEDLINE and LILACS databases regarding serum levels and prevalence of alterations in aspartate-aminotransferase, alanine-aminotransferase, alkaline phosphatase, and total bilirubin, in relation to liver histopathology, with or without discrimination of types of histopathologic alteration. RESULTS: Global mean prevalence rates of aspartate-aminotransferase and alanine-aminotransferase alterations were 86.3% and 51.1%; in cases with steatosis they were 79.1% and 38.5%; and in cases of hepatitis, 90.1% and 58%. In all studies, prevalence rates of aspartate-aminotransferase alterations were significantly higher with lower variability than those of alanine-aminotransferase. Mean aspartate-aminotransferase levels were higher than 2N (N is the upper normal limit of the method employed) in all cases with hepatitis histopathology, while those of alanine-aminotransferase were 1.48N, in the same cases. Prevalence of alkaline phosphatase and total bilirubin abnormalities were 74.5% and 74.9% globally; in cases of steatosis, they were 70.9% and 67.9%; and in cases of hepatitis, 75.9% and 77.7%. Mean alkaline phosphatase levels were above the upper normal limit in all cases, but those of total bilirubin were above normal in 4 of 7 hepatitis studies. CONCLUSIONS: Prevalence of aspartate-aminotransferase alteration was consistently related to presence of histopathologic abnormalities; an enzyme level higher than 2N suggests the diagnosis of alcoholic hepatitis.
Resumo:
PURPOSE: The objective was to describe the results of the injection of immotile spermatozoa with flexible tails when only immotile spermatozoa are present in the semen sample. METHODS: A retrospective study was conducted to analyze the procedure results for 10 couples who participated in our intracytoplasmic sperm injection program. The sperm tail was considered flexible when it moved up and down independently of the head movement, and it was considered inflexible when the movement occurred together (tail plus head). The fertilization and pregnancy rate were analyzed. RESULTS: The normal fertilization rate (presence of 2 pronuclei) was 30.3% (40/132), and the abnormal fertilization rate (presence of less than or more than 2 pronuclei) was 6.81% (9/132). A total of 52 embryos were obtained with 9 transfer procedures performed (pregnancy rate: 11.12%). CONCLUSIONS: The sperm tail flexibility test (STFT) is an easy and cost-effective way for selecting viable immotile spermatozoa and can be used as an alternative method for determining the viability of spermatozoa. This test seems to be a simple and risk-free method when compared to the swelling test.
Resumo:
RESUMO: Os glicoconjugados que decoram a superfície celular e os lípidos e proteínas secretados ocupam o ponto de encontro onde normalmente ocorrem interacções críticas homólogas (hospedeiro-hospedeiro) e heterólogas (hospedeiro-patogénio). Apesar de ser largamente aceite que os glicanos são parte integrante do processo de imunidade, continua a não ser claro qual o papel que os glicanos, em toda a sua diversidade, tomam no quadro geral da imunidade. Os glicanos, que são frequentemente terminados por resíduos de ácido siálico, podem ser alterados por factores externos, tais como patogénios, ou por acontecimentos fisiológicos celulares específicos. Normalmente em posição terminal, as glico-estruturas que contêm ácido siálico assumem um papel fundamental numa quantidade substancial de receptores imunes envolvidos na adesividade e tráfico celular, tal como as Selectinas e as Siglecs, das quais se sabe apresentarem uma relevante função imune. À altura do início desta tese, era sabido que os ácidos siálicos expressos à superfície das células poderiam modular mecanismos importantes nas respostas imunes adaptativas. Considerando a posição de charneira que as células dendríticas (DCs) ocupam na transição da resposta imune inata para a adaptativa, antecipámos que os ácidos siálicos poderiam também modular mecanismos relevantes nas DCs humanas. As DCs têm uma função muito relevante na verificação e captura antigénica, migração para os gânglios linfáticos e apresentação antigénica aos linfócitos, uma sequência de funções que conduz, em ultima instância, à indução da resposta inata adaptativa. Considerando estas premissas, a nossa hipótese principal foi que os ácidos siálicos podem influenciar funções relevantes das DCs, tais como captura de antigénios, maturação, migração para os gânglios linfáticos e apresentação antigénica às células Para testar esta hipótese, dividimos o trabalho em quatro partes: 1) Analisámos os glicanos sialilados de superfície, expressos durante a diferenciação de monócitos humanos em DCs (moDCs). Os nossos dados mostraram que a expressão dos glicanos com ligações em O (O-glicanos) e sialilados em α2,3, assim como glicanos com ligações em N (N-glicanos) sialilados em α2,6 e α2,3 aumentou durante o processo de diferenciação das moDCs. Contribuindo para esta nova configuração glicosídica, três sialiltransferases (STs) poderão estar envolvidas: a ST6Gal-1 correlaciona-se com a expressão aumentada de N-glicanos sialilados em α2,6; a ST3Gal-1 contribui para a sialilação em α2,3 de O-glicanos, em especial de antigénios T; e a ST3Gal-4 poderá ser responsável pelo aumento de N-glicanos sialilados em α2,3. Após estímulo e consequente maturação das moDCs, ambos os níveis de expressão génica de ST6Gal-1 e ST3Gal-4 são negativamente modificados sendo, também, que a expressão de ST3Gal-1 varia consoante o estímulo. 2) Estudámos posteriormente as consequências da modulação dos ácidos siálicos de superfície nas funções das DCs. Observámos que a remoção dos ácidos siálicos de superfície diminui significativamente a capacidade de macropinocitose e endocitose mediada por receptores nas moDCs. Em contrapartida, o tratamento com sialidase aumentou significativamente a capacidade das moDCs para fagocitar Escherichia coli. Determinou-se também que este mecanismo requer a existência de ácido siálico presente nas E. coli indicando um mecanismo de interacção hospedeiro-patogénio dependente de ácido siálico em ambas as partes envolvidas. As moDCs tratadas com sialidase também apresentam um nível superior de expressão de moléculas de MHC e moléculas co-estimulatórias, sugerindo um fenótipo celular mais maduro. Recorrendo ao modelo de ratinho, utilizaram-se DCs derivadas de células da medula (BMDCs) de ratinhos deficientes em ST3Gal-1 e ST6Gal-1. Estes ensaios revelaram que quer a endocitose quer a maturação são influenciadas por modificações 37 nos glicanos sialilados em α2,3 ou α2,6. A detecção e quantificação de proteínas Nglicosiladas e sialiladas em α2,6 apontou para um potencial envolvimento de integrinas β2 nestes mecanismos. 3) O efeito da sialilação em α2,6 na migração das DCs para os gânglios linfáticos foi também analisado. Observámos que BMDCs deficientes para ST6Gal-1 apresentam uma redução de cerca de 50% nos níveis de migração das DCs para os gânglios linfáticos, tal como aferido em ensaios de inflamação in situ e estudos de transferência adoptiva de células. Uma redução dos níveis deste tipo de migração foi também observada quando BMDCs nativas foram transferidas para ratinhos receptores deficientes em ST6Gal-1. São, contudo, necessários mais ensaios de forma a identificar as moléculas envolvidas neste processo. 4) Por último, analisámos o impacto da sialilação na estimulação antigénica das DCs às células T. Assim, concluiu-se que moDCs tratadas com sialidase apresentam um nível de expressão superior de IL-12, TNF-ɑ, IL-6 e IL-10, e activação do factor de transcrição nuclear kappa B (NF-κB). As DCs tratadas com sialidase induziram uma maior proliferação nas células T, com expressão correspondente de interferão-γ. Este dado sugere que a remoção de ácidos siálicos de superfície contribui para o desenvolvimento de uma resposta pro-inflamatória do tipo 1 por células T auxiliares (resposta Th1). Considerando estes dados no seu todo, concluímos que o ácido siálico tem um papel marcante nas funções imunes das DCs. Alterações à concentração de ácido siálico à superfície das células podem alterar a endocitose/fagocitose, maturação, migração para os tecidos e gânglios linfáticos e capacidade estimulatória para com as células T. Complementando estes dados, as ligações glicosídicas de ácidos siálicos criados por ST6Gal-1 e ST3Gal-1 são funcionalmente relevantes. A modulação programada da sialilação do glicocálice, mediada por sialidases individuais ou sialiltransferases é uma possibilidade aceitável para a melhoria da fagocitose por DCs e da sua potência imunológica. Este facto tem um significado particular para imunoterapias baseadas em DCs, podendo provar-se decisivo para a sua eficiência e aplicabilidade num futuro muito próximo.-------------------------------ABSTRACT: Glycans decorating cell surface and secreted proteins and lipids occupy the junction where critical host–host and host-pathogen interactions occur. In spite of the wide acceptance that glycans are centrally implicated in immunity, exactly how glycans and their variety and variability contribute to the overall immune response remains poorly defined. Glycans, frequently terminated by sialic acid residues, may be modified by external factors such as pathogens or upon specific physiological cellular events. The terminal, privileged positions of sialic acid-modified structures makes them key, fundamental determinants for a number of immune receptors with known involvement in cellular adhesiveness and cell trafficking, such as Selectins and Siglecs, with known relevant immune functions. At the time this thesis was initiated, it was established that sialic acids expressed at cell surface could modulate important mechanisms of the adaptive immune responses. Given the key role of dendritic cells (DCs) in the transition from innate to the adaptive immune responses, we anticipated that sialic acids could also modulate important mechanisms of human DCs. DCs have a relevant role in antigen screening and uptake, migration to lymph nodes and antigen presentation to lymphocytes, ultimately triggering the adaptive immune response. Therefore, our primary hypothesis was that sialic acids may modulate DC functions, such as antigen uptake, maturation, homing to lymph nodes and antigen presentation to T cells. To test this hypothesis, we divided our work in four parts. 1) Surface sialylated glycans expressed during differentiation from human monocytes to DCs (moDCs) were analyzed. Our data showed that α2,3-sialylated O-glycans and α2,6- and α2,3-sialylated N-glycans expression increased during moDC differentiation. Three main sialyltransferases (STs) are committed with this new glycan configuration: ST6Gal- 1 correlates with the increased expression of α2,6-sialylated N-glycans; ST3Gal-1 32 contributes for the α2,3-sialylation of O-glycans, especially T antigens; and ST3Gal-4 may contribute for the increased α2,3-sialylated N-glycans. Upon moDC maturation, ST6Gal-1 and ST3Gal-4 are downregulated and ST3Gal-1 is altered in a stimulus dependent manner. 2) We subsequently analyzed the consequences of the modulation of cell surface sialic acids in DC functions. We observed that removing surface sialic acid by sialidase significantly decreased the capacity of moDCs to micropinocytose and receptormediated endocytose. In contrast, treatment with a sialidase significantly improved the capacity of moDCs to phagocytose Escherichia coli. The improved phagocytosis mechanism required E. coli sialic acids, indicating a mechanism of host–pathogen interaction dependent on sialic acid moieties. Sialidase-treated moDCs have increased expression of MHC and co-stimulatory molecules, suggesting a more mature phenotype. Experiments using mouse bone marrow-derived DCs (BMDCs) from ST3Gal-1-/- and ST6Gal-1-/- strains indicated that endocytosis and maturation are influenced by changes in either α2,3 or α2,6-sialylated glycans. The analysis of α2,6-sialylated, N-glycosylated proteins, strongly suggested the potential involvement of β2 integrins, underlying these mechanisms. 3) The effect of α2,6-sialylation in DC homing to lymph nodes was also analyzed. We observed that BMDCs deficient for ST6Gal-1 have an almost 50% reduction in DC homing, as assayed by in situ inflammation and adoptive transfer studies. A reduction in DC homing was also observed when wild type BMDCs were transferred into ST6Gal-1-/- recipient mice. Further investigations are necessary to identify the molecules involved in this process. 4) Finally, we also analyzed the impact of sialylation on DCs ability to prime T cells. Sialidase-treated moDCs show increased gene expression of IL-12, TNF-α, IL-6 and IL- 10 cytokines, and activation of the transcription factor nuclear factor-κB. Sialidase33 treated DCs induced a higher proliferative response of T cells with concomitant higher expression of interferon-γ, suggesting that the clearance of cell surface sialic acids contributes to the development of a T helper type 1 proinflammatory response. Together, our data strongly support sialic acid’s relevance in DC immune functions. Alterations of cell surface sialic acid content can alter the endocytosis/phagocytosis, maturation, migration/homing and the ability for T cell priming in human DCs. Moreover, sialic acid linkages created by ST6Gal-1 and ST3Gal-1 are functionally relevant. The engineering of cell surface sialylation, mediated by individual sialidases or sialyltransferases is a likely possibility to fine tune DC phagocytosis and immunological potency, with particular significance to DC-based therapies.
Resumo:
This paper practically applies the “Lean Startup Approach” by identifying, analyzing and executing a newly developed web-based business idea. Hypotheses were designed and tested with the construction of a minimum viable product – i.e. a landing page. In-depth interviews allowed deciding either to pivot or persevere the initial launch strategy. Overall, the aim was to collect as much valuable response as possible from customers and ultimately decide for a superior strategy while devoting the smallest amount of time and money.
Resumo:
In this research, five types of polymer repair materials were selected for investigation of the influence of sample shape, deformation rate and test temperature on the mechanical properties determined with an uniaxial tensile test. The results showed the clear effect of measurement conditions on tensile strength, elongation and modulus of elasticity. The highest tensile strength and modulus of elasticity were exhibited by epoxy resin for the filling of concrete cracks, which achieved 1% elongation. The lowest coefficient of dispersion characterized the results of tensile test carried out using dumbbell samples at a deformation rate of 50 mm/min. The effect of temperature varied with the material type.
Resumo:
The development of novel strengthening techniques to address the seismic vulnerability of masonry elements is gradually leading to simpler, faster and more effective strengthening strategies. In particular, the use of fabric reinforced cementitious matrix systems is considered of great potential, given the increase of ductility achieved with simple and economic strengthening procedures. To assess the effectiveness of these strengthening systems, and considering that the seismic action is involved, one important component of the structural behaviour is the in-plane cyclic response. In this work is discussed the applicability of the diagonal tensile test for the assessment of the cyclic response of strengthened masonry. The results obtained allowed to assess the contribution of the strengthening system to the increase of the load carrying capacity of masonry elements, as well as to evaluate the damage evolution and the stiffness degradation mechanisms developing under cyclic loading.
Resumo:
O presente artigo discute a metodologia de um novo modelo para calcular a resistência à punção simétrica de lajes de concreto reforçado com fibras de aço (CRFA). O modelo é fundamentado na teoria da fissura crítica de cisalhamento de Muttoni e seus coautores e na proposta do ModelCode10 para simular o comportamento pós-fissuração do CRFA. O desempenho do modelo é avaliado a partir de um banco de dados (BD), coletado da literatura técnica, que totaliza 154 lajes. Os resultados são avaliados em função da precisão, da dispersão e do nível de conservadorismo, a partir do parâmetro λ=Vexp/Vteo, sendo Vexp e Vteo, respectivamente, os resultados obtidos do BD e do modelo. Finalmente, para confirmar o desempenho do modelo, os seus resultados são comparados a outros 7 modelos da literatura técnica e ambos são classificados segundo o critério modificado de Collins, o Demerit Points Classifications – DPC.
Resumo:
Despite the extensive research that has been conducted on the debonding behaviour of FRP strengthening systems, no standard methodology has been yet established on its experimental characterization. In this context, to assess the performance and reliability of small scale testing on NSM (near surface mounted) FRP strengthening systems, an experimental program was carried out on a series of nine NSM FRP strengthening systems, in the framework of an international Round Robin Testing (RRT). Eleven laboratories and seven manufacturers and suppliers participated in this extensive international exercise, which regarded both NSM and EBR FRP strengthening systems. Test results obtained for the NSM systems by the participating laboratories are discussed and compared in this paper to investigate the feasibility of the adopted single/double pulling shear test method, to investigate the mechanism of bond between NSM FRP reinforcement and concrete, and to investigate the level of variability obtained between the participating laboratories testing the same material batches. It is concluded that the tested variants in the adopted single/double shear pulling test have a significant influence, stressing the importance of the level of detail of standardized test protocols for bond verification. On overall, given the variants included in this study, the obtained variation in bond stress-slip behaviour between the laboratories remained fairly limited.
Resumo:
Polymer binder modification with inorganic nanomaterials (NM) could be a potential and efficient solution to control matrix flammability of polymer concrete (PC) materials without sacrificing other important properties. Occupational exposures can occur all along the life cycle of a NM and “nanoproducts” from research through scale-up, product development, manufacturing, and end of life. The main objective of the present study is to analyse and compare different qualitative risk assessment methods during the production of polymer mortars (PM) with NM. The laboratory scale production process was divided in 3 main phases (pre-production, production and post-production), which allow testing the assessment methods in different situations. The risk assessment involved in the manufacturing process of PM was made by using the qualitative analyses based on: French Agency for Food, Environmental and Occupational Health & Safety method (ANSES); Control Banding Nanotool (CB Nanotool); Ecole Polytechnique Fédérale de Lausanne method (EPFL); Guidance working safely with nanomaterials and nanoproducts (GWSNN); Istituto Superiore per la Prevenzione e la Sicurezza del Lavoro, Italy method (ISPESL); Precautionary Matrix for Synthetic Nanomaterials (PMSN); and Stoffenmanager Nano. It was verified that the different methods applied also produce different final results. In phases 1 and 3 the risk assessment tends to be classified as medium-high risk, while for phase 2 the more common result is medium level. It is necessary to improve the use of qualitative methods by defining narrow criteria for the methods selection for each assessed situation, bearing in mind that the uncertainties are also a relevant factor when dealing with the risk related to nanotechnologies field.
Resumo:
This work compares the viscoelastic properties of an asphalt binder (70/100 pen) modified with different waste plastics and the mechanical properties of the resultant asphalt mixtures. Two different plastic wastes were used, namely recycled HDPE and EVA. Three different polymer modified binders were produced with these plastic wastes: i) 5% HDPE modified binder (P5); ii) 5% EVA modified binder (E5) and; iii) a modified binder with 4% of EVA and 2% HDPE (E4P2). Asphalt mixtures were produced with these modified binders, and their mechanical properties were analysed and compared with a conventional mixture produced with a 30/50 pen bitumen. It was possible to conclude that these recycled polymers are able to improve the mechanical performance of the asphalt mixtures used in road paving.