Combination of amperometric detector & UV detector for capillary electrophoresis

A new electrochemical cell assembly with the combination of UV and amperometric detector (AD) based on their complementarity was described. A Nafion tubing junction was used to decouple the high voltage from the separation capillary in the rear of on-column UV detector. In this mode, the electroactive and inert compounds could be detected by UV and AD at the same time. Aromatic amines were determined with the UV and the end-column AD detection to evaluate the performances of the cell assembly. Such an improved electrochemical detector could match the capillary with different diameters. By simple adjustment of the screws, the positioning of the working electrode and the detection capillary was easily gained without microscope. It is also very easy to assemble and disassemble the working electrode when needed. (C) 1999 Elsevier Science B.V. All rights reserved.

The synthesis, characterization and photophysical properties of binary and ternary rare earth complexes with N-phenylanthranilic acid and l,l0-phenanthroline

Some novel binary and ternary complexes of rare earth(Gd, Eu,Tb) with N-Phenylanthranilic acid and 1,10-Phenanthroline were synthesized by homogenous precipitation and their compositions were characterized by,elemental analysis, IR spectra and UV-Vis spectra, The triplet state energies of N-Phenylanthranilic acid was determined to be 24 330 cm(-1) with the phosphorescence spectra of its gadolinium complexes and the energy match between the ligand and the central rare earth ions was studied. The photophysical properties such as luminescence properties and intramolecular energy transfer match between rare earth ions and ligands and between ligands were discussed. The result indicates that terbium complexes with N-Phenylanthranilic acid and 1,10-Phenanthroline have excellent luminescence properties.

Spectroscopic study of luminescence and energy transfer of binary and ternary complexes of rare earth with aromatic carboxylic acids and 1,10-phenanthroline

A series of rare earth (Gd, Eu, Tb) complexes with different substituent group carboxylic acids (ortho-hydroxylbenzioc acid, ortho-aminobenzoic acid and ortho-methoxy benzoic acid) and 1,10-phenanthroline were synthesized. The spectroscopic studies of the photophysical properties such as luminescence properties, energy match and intramolecular energy transfer were carried out. The lowest triplet state energies of ligands and the intramolecular energy transfer efficiencies were determined with the measurement of low phosphorescence spectra and lifetimes of Gd complexes.

Synthesis, luminescence and intramolecular energy transfer of binary and ternary rare earth complexes with aromatic carboxylic acids and 1,10-phenanthroline

A series of binary and ternary rare earth complexes with para-substitued benzoic acids and 1,10-phenanthroline were synthesized. The phosphorescence spectra were measured and the lowest tripler state energies of ligands were determined, the phosphorescence lifetimes were obtained and intramolecular energy transfer mechanism between ligands was studied. The luminescence properties were also measured and were in agreement with the prediction. The energy match and intramolecular energy transfer process in these binary and ternary complexes were discussed in detail.

FRACTURE-TOUGHNESS OF PHENOLPHTHALEIN POLYETHER KETONE

The static and impact fracture toughness of phenolphthalein polyether ketone (PEK-C) were studied at different temperatures. The static fracture toughness of PEK-C was evaluated via the linear elastic fracture mechanics (LEFM) and the J-integral analysis. Impact fracture toughness was also analyzed using the LEFM approach. Temperature and strain rate effects on the fracture toughness were also studied. The enhancement in static fracture toughness at 70 degrees C was thought to be caused by plastic crack tip blunting. The increase in impact fracture toughness with temperature was attributed two different mechanisms, namely, the relaxation process in a relatively low temperature and thermal blunting of the crack tip at higher temperature. The temperature-dependent fracture toughness data obtained in static tests could be horizontally shifted to match roughly the data for impact tests, indicating the existence of a time-temperature equivalence relationship. (C) 1995 John Wiley & Sons, Inc.

Analysis of expressed sequence tags of a marine red alga, Gracilaria lemaneiformis

The expressed sequence tags (EST) has been proved to be a useful tool for discovering and identifying functional genes, especially in some species whose genetic information is unavailable. A total of 180 ESTs have been generated from a cDNA library of gametophytic Gracilaria lemaneiformis in this study. These clones are clustered into 151 groups, among which 8 groups are highly homologous to chloroplast genes and are abundant in the library. After searching for matches in the EST database of red alga, 22 groups are found to match with the registered ESTs of Rhadophyta and 6 with Gracilaria. Searching in the protein database reveal that 73 non-redundant clones have significant similarity to some known sequences, the majority of which are involved in photosynthesis, DNA transcription or translation, and 6, 4 and 3 clones are associated with growth or development, signal transduction and stress or defense response, respectively.

潮波模型的优化开边界方法研究

数值模式是潮波研究的一种有利手段，但在研究中会面临各种具体问题，包括开边界条件的确定、底摩擦系数和耗散系数的选取等。数据同化是解决这些问题的一种途径，即利用有限数量的潮汐观测资料对潮波进行最优估计，其根本目的是迫使模型预报值逼近观测值，使模式不要偏离实际情况太远。本文采用了一种优化开边界方法，沿着数值模型的开边界优化潮汐水位信息，目的是设法使数值解在动力约束的意义下接近观测值，获得研究区域的潮汐结果。边界值由指定优化问题的解来定，以提高模拟区域的潮汐精度，最优问题的解是基于通过开边界的能量通量的变化，处理开边界处的观测值与计算值之差的最小化。这里提供了辐射型边界条件，由Reid 和Bodine（本文简称为RB）推导，我们将采用的优化后的RB方法（称为ORB）是优化开边界的特殊情况。 本文对理想矩形海域（ E- E， N- N， 分辨率 ）进行了潮波模拟，有东部开边界，模式采用ECOM3D模式。对数据结果的误差分析采用，振幅平均偏差，平均绝对偏差，平均相对误差和均方根偏差四个值来衡量模拟结果的好坏程度。 需要优化入开边界的解析潮汐值本文采用的解析解由方国洪《海湾的潮汐与潮流》（1966年）方法提供，为验证本文所做的解析解和方文的一致，本文做了其第一个例子的关键值a,b,z,结果与其结果吻合的相当好。但略有差别，分析的可能原因是两法在具体迭代方案和计算机保留小数上有区别造成微小误差。另外，我们取m=20，得到更精确的数值，我们发现对前十项的各项参数值，取m=10,m=20各项参数略有改进。当然我们可以获得m更大的各项参数值。 同时为了检验解析解的正确性讨论m和l变化对边界值的影响，结果指出，增大m，m=20时，u的模最大在本身u1或u2的模的6%；m=100时，u的模最大在本身u1或u2的模的4%；m再增大，m=1000时，u的模最大在本身u1或u2的模的4%，改变不大。当l<1时， =0处u的模最大为2。当l=1时， =0处u的模最大为0.1，当l>1时，l越大，u的模越小，当l=10时，u的模最大为0.001，可以认为为0。 为检验该优化方法的应用情况，我们对理想矩形区域进行模拟，首先将本文所采用的优化开边界方法应用于30m的情况，在开边界优化入开边界得出模式解，所得模拟结果与解析解吻合得相当好，该模式解和解析解在整个区域上，振幅平均绝对偏差为9.9cm,相位平均绝对偏差只有4.0 ，均方根偏差只有13.3cm，说明该优化方法在潮波模型中有效。 为验证该优化方法在各种条件下的模拟结果情况，在下面我们做了三类敏感性试验： 第一类试验：为证明在开边界上使用优化方法相比于没有采用优化方法的模拟解更接近于解析解，我们来比较ORB条件与RB条件的优劣，我们模拟用了两个不同的摩擦系数，k分别为：0,0.00006。 结果显示，针对不同摩擦系数，显示在开边界上使用ORB条件的解比使用RB条件的解无论是振幅还是相位都有显著改善，两个试验均方根偏差优化程度分别为84.3%，83.7%。说明在开边界上使用优化方法相比于没有采用优化方法的模拟解更接近于解析解，大大提高了模拟水平。上述的两个试验得出， k=0.00006优化结果比k=0的好。 第二类试验，使用ORB条件确定优化开边界情况下，在东西边界加入出入流的情况，流考虑线性和非线性情况，结果显示，加入流的情况，潮汐模拟的效果降低不少，流为1Sv的情况要比5Sv的情况均方根偏差相差20cm,而不加流的情况只有0.2cm。线性流和非线性流情况两者模式解相差不大，振幅，相位各项指数都相近, 说明流的线性与否对结果影响不大。 第三类试验，不仅在开边界使用ORB条件，在模式内部也使用ORB条件，比较了内部优化和不优化情况与解析解的偏差。结果显示，选用不同的k,振幅都能得到很好的模拟，而相位相对较差。另外，在内部优化的情况下，考虑不同的k的模式解， 我们选用了与解析解相近的6个模式解的k,结果显示，不同的k,振幅都能得到很好的模拟，而相位较差。 总之，在开边界使用ORB条件比使用RB条件好，振幅相位都有大幅度改进，在加入出入流情况下，流的大小对模拟结果有影响，但线形流和非线性流差别不大。内部优化的结果显示，模式采用不同的k都能很好模拟解析解的振幅。

Morphology and infraciliature of three species of Metaurostylopsis (Ciliophora, Stichotrichia): M. songi n. sp., M. salina n. sp., and M. marina (Kahl 1932) from sediments, saline ponds, and coastal waters.

Two new urostylid ciliates, Metaurostylopsis songi n. sp. and Metaurostylopsis salina n. sp. and Metaurostylopsis marina (Kahl 1932) are investigated using live observation and protargol impregnation. These species were isolated in Korea from intertidal sediments, saline ponds, and coastal waters. Metaurostylopsis songi is in vivo about 120 pm x 25 mu m, has a slenderly ellipsoidal body, colorless cortical granules in rows on ventral and dorsal body sides, about 54 macronuclear nodules, 28-47 adoral membranelles, five frontal, two or three frontoterminal and six or seven transverse cirri, and 9-12 midventral cirral pairs followed posteriorly by 1-3 single cirri. In vivo M. salina is about 60 pin x 25 mu m, has a pyriform body, colorless cortical granules irregularly arranged, about 45 macronuclear nodules, 18-23 adoral membranelles, three frontal, three to five frontoterminal and two to five transverse cirri, and four or five midventral cirral pairs followed posteriorly by five to seven single cirri. Both species have three marginal cirral rows on each body side and 3 long dorsal kineties. The Korean specimens of M. marina match the Chinese population in all main features. Metaurostylopsis songi differs from M. marina by the more slender body, the number of frontal cirri (invariably five vs. four), and the arrangement of cortical granules (in rows on dorsal and ventral cortex vs. only along dorsal kinetics and anterior body margin). Metaurostylopsis salina differs from its congeners by the distinctly smaller size, the pyriform body shape, the scattered cortical granules (vs. in rows), and number of frontal cirri. It differs from M. marina also by the number of midventral cirral pairs (four or five vs. seven to 11).

Analysis of high wheat yields in Northwest China

Grain yields of over 14 Mg ha(-1) were reported in 1978 for spring wheat (Triticum aestivum L.) grown in Northwest China. Understanding the circumstances under which this record yield was achieved may be useful in defining the key factors that lead to high grain yields and in determining the limits to wheat yield. A relatively simple, mechanistic model was used in an effort to simulate the record yield. The model was used as a framework in which various crop traits could be adjusted to match the observed crop growth. The weather that was characterized by cool temperatures and high levels of solar radiation, proved to be especially important in allowing a full-season crop to achieve record yields. Variables defining plant development in the model also had to be set to describe the high yielding cultivar grown in China. Leaf development was defined by the length of a phyllochron, which was set equal to 78 TU (thermal units, base temperature equal to 0 degrees C) based on independent data. The description of grain fill had to be defined to match simulation results with the observations. Two variables, length of the grain-fill period and the grain growth rate, were set in response to the unique traits of this cultivar and the low temperatures during grain development. These simulations led to important suggestions for examining the interaction between cool temperature regimes and developmental traits of wheat cultivars. (C) 1997 Published by Elsevier Science Ltd.

基于线性不变矩和角度向量的立体匹配算法

针对室内场景双目立体匹配有别于一般场景立体匹配的特殊性,提出了一种计算简便、准确度高的立体图像匹配算法。该算法首先利用canny算子检测物体的边缘,根据边缘的线性不变矩寻找出目标物体,然后提取出目标物体轮廓的特征点,利用角度直方图计算出左右图像的旋转角度,最后利用角度向量实现左右图像的对应像素点的匹配。线性不变矩有效地将计算复杂度由二维降低到一维,大大降低了计算量。角度向量的提出降低了特征点匹配的复杂度,而且计算简便,准确率高。实验表明,该算法对图像的缩放、旋转、平移均免疫,具有较高的识别精度和良好的抗干扰性,计算效率高于传统方法,有着较高的应用价值。

基于外极线分区的动态立体匹配算法

基于区域的立体匹配算法仅针对支撑窗内的灰度信息定义匹配代价函数,导致在弱(无)纹理区域采用WTA优化出现歧义性。该文在外极线分区的基础上,改用区域作为匹配基元,针对歧义性区域,在代价函数中引入遮挡项和平滑项,并按照区域优先级的高低,动态匹配相应区域,获得可靠的视差信息。实验证明,该算法在保持实时性的同时对弱纹理区域处理具有有效性。

机器人插件作业的视觉导引方法研究

插件作业 (parts mating)是装配机器人的一项基本作业环节 .本文介绍了以双目立体视觉实现该作业的视觉导引方法 .该方法通过采用人机交互方式 ,借助于人的智慧 ,提高了图像特征提取和匹配的准确性和可靠性、可直观准确地给出插件作业的动作参数 ,克服了自动视觉计算复杂、鲁棒性差的缺点 ,适用于机器人遥操作作业 .实验表明 ,基于人机交互的机器人插件作业在立体视觉导引下是完全可行的

一种基于立体视觉的多视点建模方法

论述了一种基于立体视觉的建模方法。该方法利用立体视觉系统在不同视点对景物观测所获得的局部三维几何模型，通过空间特征点匹配和坐标变换将局部模型融合，从而建立景物的完整描述。文章重点介绍了一种基于空间向量的坐标变换求解方法。

基于DM642的香烟小包装外观检测系统

本文设计与实现了一种基于TMS320DM642的香烟小包装外观质量检测系统,详细阐述了该系统的硬件构成、软件流程、检测算法以及针对DSP处理器进行的系统优化。系统以TMS320DM642处理器为核心建立硬件平台,通过摄像头获取香烟小包装图像,采用改进的模板匹配算法对当前图像进行质量检测,最终在监视器上显示检测结果并将检测结果送执行单元进行处理。实验结果表明基于TMS320DM642的香烟小包装检测系统,检测效果快速、准确、有效,应用前景广泛。

大洋有孔虫微量元素研究

The most novel aspect of this thesis is the combination analysis of the boron isotopes and trace elements. What’s more, it also provides a reliable analytical technique, which is suitable for both boron isotopes and trace elements. Al/Ca values can be used to monitor the clay removal during the sample preparation. It is found that when Al/Ca>100 mol/mol, the measured boron isotopic compositions are always several permil lower than those properly cleaned. B/Ca ratios can be used to calculate the exact boron loaded for each sample. Otherwise, too much loading will lead to too long time for the whole analytical sequence, and too less loading might incur serious blank problem. One other benefit besides those discussed above is that the combination analysis of boron isotopes and trace elements on the same sample allows reconstruction of the marine carbonate system and atmospheric pCO2 without assumption of the other parameter. In the marine carbonate system, with the seawater pH from the foraminiferal 11B, one has to make an assumption on the other variable to obtain the rest four variables. A series studies found that U/Ca and B/Ca are potential proxies for seawater [CO32-]and [HCO3-], respectively. Since they are measured on the same sample with boron isotopes, hence, there is no spatial or temporal ambiguity in the incorporation of the two controlling parameters. With 11B and U/Ca, the reconstructed atmospheric pCO2 variations match the atmospheric pCO2 record from the Vostok ice core within ±20 ppm. The incorporations of U and B into foraminiferal carbonates are controlled by the overall growth rate of individual foraminifers and other possible factors. The reliable application of these proxies still require further calibrations. In a similar fashion, the combination analysis of boron isotopes and Mg/Ca also has great advantages. Mg/Ca has been proved to be a reliable proxy for the surface seawater temperature. With the combination analysis, one can determine the phase between changes in atmospheric pCO2 and surface seawater temperature, thus explore the cause and mechanism of the changes in atmospheric pCO2. .