Trânsito gastrintestinal e digestibilidade aparente de nutrientes em eqüinos alimentados com dietas contendo grãos secos ou silagem de grãos úmidos de triticale

Cinco éguas mestiças (idade e peso corporal médios de seis anos e 480 kg PV) foram distribuídas em delineamento experimental em quadrado latino para se e avaliar a utilização de dietas contendo grãos de triticale (secos ou ensilados) em substituição ao milho na alimentação de eqüinos, por meio do ensaio de avaliação do trânsito gastrintestinal e da digestibilidade. Os tratamentos consistiram de três níveis de grãos de triticale em substituição aos grãos de milho (0, 50 e 100%) e duas formas de conservação dos grãos de triticale (secos ou ensilados). As dietas foram isoprotéicas (12,5% PB), com ingestão diária de MS pelos animais de 2,0% PV (relação volumoso : concentrado de 50:50). Os coeficientes de digestibilidade aparente (CDa) da MS, MO, PB e FDN foram determinados indiretamente. Os parâmetros de trânsito gastrintestinal avaliados foram: k1 (taxa de passagem pelo intestino grosso), k2 (taxa de passagem pelo estômago), TT (tempo de trânsito), TMR (tempo médio de retenção) e TMRT (tempo médio de retenção total). Não houve diferença para os CDa da MS, MO, PB e FDN entre as dietas experimentais, observando-se valores médios de 64,31; 65,14; 74,13 e 57,25%, respectivamente. Considerando-se a cinética das fases sólida e líquida, notou-se efeito somente para k2 na fase sólida da digesta, cujo valor nas rações contendo 100% de triticale (seco ou ensilado) foi de 19,63%/h e na dieta controle (0% de triticale), de 23,72%/h. Observou-se efeito linear crescente para o TT na fase sólida da digesta, com a elevação dos níveis de substituição dos grãos de milho pelos grãos de triticale ensilados. Concluiu-se que os concentrados para eqüinos podem ser formulados com grãos de triticale secos ou ensilados em substituição total ao milho. A inclusão de grãos de triticale na alimentação desta espécie animal promoveu trânsito lento da fase sólida da digesta.

Speciation analysis of Sn(II) and Sn(IV) using baker's yeast and inductively coupled plasma optical emission spectrometry

The use of Saccharomyces cerevisiae as a substrate to selectively retain Sn(II) and Sn(IV) has been investigated. Several factors affecting the retention of the analytes by yeast, such as pH, amount of biomass, temperature and time of contact were evaluated. Based on this study, a method for determination of Sn(II) and Sn(IV) combining inductively coupled plasma optical emission spectrometry (ICP OES) and solid phase extraction using Saccharomyces cerevisiae is proposed. The procedure consists of the selective retention of Sn(IV) by yeast at pH = 2.0 while Sn(II) remains in solution. Determination of tin in the solid phase was easily carried out by submitting a slurry of the yeast (0.5 g/40 mL) directly to ICP OES. The precision of the extraction procedure was characterized by an RSD lower than 4%. The detection limits of tin (3 sigma) in the solid phase and the liquid phase were 1.1 and 0.7 mu g L-1, respectively. The proposed approach was evaluated for determination of Sn(II) and Sn(IV) in spiked river water and real samples of industrial waste water (untreated and treated). For all samples, recoveries of spiked Sn(II) and Sn(IV) were between 85 and 112%.

Detecção e diferenciação do vírus da bronquite infecciosa pela técnica de imunocaptura-RT-PCR E RFLP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da influência da natureza da matriz sólida sobre a extração supercrítica de óleos vegetais

A extração de substâncias de substratos sólidos tanto a baixas como a altas pressões envolve pelo menos duas fases, uma sólida e outra fluida. O conteúdo de soluto em cada fase é expresso em termos do volume da fase e/ou do volume do solvente. Então para modelar a transferência de massa interfacial, é necessário um coeficiente de partição. Em geral a forma mais simples para tratar o problema é modelar as fases separadamente. O mecanismo de transferência de massa predominante pode variar de sistema para sistema. Para alguns substratos a maior resistência pode estar na fase sólida e para outros ela está na fase fluida. Como na interface as concentrações referentes a cada fase são representadas por grandezas diferentes, as fases têm de ser modeladas separadamente. No entanto, dependendo do sistema, pode haver um mecanismo de transferência predominando sobre o outro e, muitos efeitos podem ser desprezados para a simplificação do modelo. A utilização de modelos matemáticos mais simples requer uma combinação das variáveis na definição de parâmetros mais abrangentes que possam representar o fenômeno. Neste trabalho as curvas de extração foram ajustadas a um modelo que descreve a transferência de massa interfacial como uma cinética de primeira ordem, tendo a constante da velocidade de extração único parâmetro de ajuste. Propõe-se que este parâmetro de ajuste depende da solubilidade do soluto no solvente supercrítico e das características do substrato solido. Para isto foram feitos experimentos de extração com babaçu, açaí em pó e polpa de pupunha, usando dióxido de carbono supercrítico nas condições de 20, 25 e 30 MPa a uma temperatura de 50 ºC. Os resultados mostraram que os dados experimentais se ajustam bem a um modelo com uma constante característica de cada material, com valores 4,1983 x 10-5 m/kg∙s para o babaçu, 4,2258 x 10-5 m/kg∙s para a pupunha e 3,9115 x 10-5 m/kg∙s para o açaí em pó.

Estimativas da condutividade térmica dos minerais e rochas e influência de parâmetros térmicos e petrofísicos na resistividade aparente da formação

O presente estudo realiza estimativas da condutividade térmica dos principais minerais formadores de rochas, bem como estimativas da condutividade média da fase sólida de cinco litologias básicas (arenitos, calcários, dolomitos, anidritas e litologias argilosas). Alguns modelos térmicos foram comparados entre si, possibilitando a verificação daquele mais apropriado para representar o agregado de minerais e fluidos que compõem as rochas. Os resultados obtidos podem ser aplicados a modelamentos térmicos os mais variados. A metodologia empregada baseia-se em um algoritmo de regressão não-linear denominado de Busca Aleatória Controlada. O comportamento do algoritmo é avaliado para dados sintéticos antes de ser usado em dados reais. O modelo usado na regressão para obter a condutividade térmica dos minerais é o modelo geométrico médio. O método de regressão, usado em cada subconjunto litológico, forneceu os seguintes valores para a condutividade térmica média da fase sólida: arenitos 5,9 ± 1,33 W/mK, calcários 3.1 ± 0.12 W/mK, dolomitos 4.7 ± 0.56 W/mK, anidritas 6.3 ± 0.27 W/mK e para litologias argilosas 3.4 ± 0.48 W/mK. Na sequência, são fornecidas as bases para o estudo da difusão do calor em coordenadas cilíndricas, considerando o efeito de invasão do filtrado da lama na formação, através de uma adaptação da simulação de injeção de poços proveniente das teorias relativas à engenharia de reservatório. Com isto, estimam-se os erros relativos sobre a resistividade aparente assumindo como referência a temperatura original da formação. Nesta etapa do trabalho, faz-se uso do método de diferenças finitas para avaliar a distribuição de temperatura poço-formação. A simulação da invasão é realizada, em coordenadas cilíndricas, através da adaptação da equação de Buckley-Leverett em coordenadas cartesianas. Efeitos como o aparecimento do reboco de lama na parede do poço, gravidade e pressão capilar não são levados em consideração. A partir das distribuições de saturação e temperatura, obtém-se a distribuição radial de resistividade, a qual é convolvida com a resposta radial da ferramenta de indução (transmissor-receptor) resultando na resistividade aparente da formação. Admitindo como referência a temperatura original da formação, são obtidos os erros relativos da resistividade aparente. Através da variação de alguns parâmetros, verifica-se que a porosidade e a saturação original da formação podem ser responsáveis por enormes erros na obtenção da resistividade, principalmente se tais "leituras" forem realizadas logo após a perfuração (MWD). A diferença de temperatura entre poço e formação é a principal causadora de tais erros, indicando que em situações onde esta diferença de temperatura seja grande, perfilagens com ferramentas de indução devam ser realizadas de um a dois dias após a perfuração do poço.

Polyphenylen-Dendrimere

Polyphenylen-Dendrimere Alexander Josef Berresheim Zusammenfassung der Dissertation Die vorliegende Arbeit mit dem Thema 'Polyphenylen-Dendrimere' ist synthetisch orientiert und behandelt im Wesentlichen den Aufbau neuer Polyphenylen-Dendrimere durch die Anwendung wiederholter Diels-Alder- und Desilylierungs-Reaktionen. Diskutiert wird die Synthese der einzelnen Bausteine, die Synthese der verschiedenen Dendrimere sowie deren Charakterisierung. Außerdem wird die oxidative Cyclodehydrierung geeigneter Dendrimere zu polycyclischen aromatischen Kohlenwasserstoffen beschrieben. Die Synthese der Dendrimere beruht auf einer wiederholten Diels-Alder-Reaktion eines Tetraphenylcyclopentadienons mit einem aromatischen Acetylen. Durch die Variation des Kerns und des Verzweigungsbausteins werden die Wachstumsgrenzen, denen dieser Dendrimer-Typ unterliegt, demonstriert. Es wird gezeigt, dass ein Dendrimer, bei dessen Synthese 3,4-Di-[4-(tri-iso-propylsilylethinyl)phenyl]-2,5-diphenylcyclopentadienon als Verzweigungsbaustein verwendet wird, bis zur vierten Generation wachsen kann. Wird bei der Synthese 3,3',5,5'-Tetraethinylbiphenyl als Kern verwendet, entsteht ein Oligophenylen, das aus 302 Benzolringen besteht.Bei Dendrimeren, deren Synthese auf dem A4B-Baustein 2,3,4,5-Tetrakis-[4-(tri-iso-propylsilylethinyl)phenyl]cyclopentadienon beruht, hängt die höchste Generation, die monodispers hergestellt werden kann, von der Art des Kerns ab. Wird 1,4-Diethinylbenzol verwendet, lassen sich die ersten drei Generationen synthetisieren. Hat der Kern jedoch die Multiplizität 'vier' oder 'sechs' ist bereits bei der zweiten Generation das Ende des monodispersen Wachstums erreicht.Die Charakterisierung der Dendrimere zeigt, dass es sich um Nanopartikel mit einer stabilen Form handelt. Der Durchmesser wächst linear mit der Generation. In einem Fall war es möglich einen Einkristall zu erhalten, dessen Kristallstruktur ermittelt werden konnte. Hierbei zeigt sich, dass es zu einer hohen Einlagerung von Lösungsmitteln in der Festphase kommen kann. Dieses Ergebnis wurde auch durch gezielte Versuche zum Einlagerungsverhalten von Lösungsmitteln in der Festphase bestätigt.Der letzte Teil dieser Arbeit widmet sich der Möglichkeit, die Polyphenylen-Dendrimere zu großen zweidimensionalen Graphitausschnitten zu cyclodehydrieren. Es war generell möglich, polycyclische aromatische Kohlenwasserstoffe mit bis zu 306 Kohlenstoffatomen herzustellen. Es zeigt sich aber auch, dass mit zunehmender Größe des Aromaten, die Intensität der Nebenreaktionen zunimmt.

Synthese tumorassoziierter Glycopeptidkonjugate basierend auf den epithelialen Mucinen MUC1 und MUC4 als potentielle Antitumorvakzine

Die Immuntherapie stellt eine hoffnungsvolle Alternative zu etablierten Behandlungsmethoden für Krebserkrankungen dar. Durch die Aktivierung des Immunsystems erhofft man sich eine selektive Abtötung von Tumorzellen. Eine solche Aktivierung kann durch Vakzinierung mit Glycopeptiden, welche Partialstrukturen tumorassoziierter Oberflächenglycoproteine darstellen, erfolgen. Um eine effektive Immunantwort zu erreichen, ist allerdings eine Konjugation dieser Glycopeptide mit immunogenen Trägern nötig. Zur Darstellung solcher Konjugate wurden im Rahmen dieser Arbeit zunächst mehrere, mit tumorassoziierten Kohlenhydraten glycosylierte Aminosäurebausteine dargestellt. Diese Bausteine wurden anschließend zur Festphasensynthese von Glycopeptiden eingesetzt. Durch ein neuartiges, chemoselektives Kupplungsverfahren konnten diese tumorassoziierten Glycopeptide an ein immunogenes Trägerprotein angebunden werden. Weiterhin wurde durch Festphasenpeptidsynthese ausgehend von einem tetrafunktionellen Lysin-Baustein ein dendrimeres Glycopeptid (MAP) erzeugt. Die Darstellung von vollsynthetischen Vakzinen gelang in Form von Konjugaten bestehend aus einem universellen T-Zell-Epitop und einem tumorassoziierten Glycopeptid. Diese Synthesen wurden ausgehend von einem festphasengebundenen, orthogonal geschützten Lysin durchgeführt. Abschließend wurde die Synthese von Konjugaten bestehend aus einem tumorassoziierten Glycopeptid und dem Mitogen Pam3Cys untersucht.

DNA block copolymers - synthesis, morphologies and applications

The last decades have witnessed significant and rapid progress in polymer chemistry and molecular biology. The invention of PCR and advances in automated solid phase synthesis of DNA have made this biological entity broadly available to all researchers across biological and chemical sciences. Thanks to the development of a variety of polymerization techniques, macromolecules can be synthesized with predetermined molecular weights and excellent structural control. In recent years these two exciting areas of research converged to generate a new type of nucleic acid hybrid material, consisting of oligodeoxynucleotides and organic polymers. By conjugating these two classes of materials, DNA block copolymers are generated exhibiting engineered material properties that cannot be realized with polymers or nucleic acids alone. Different synthetic strategies based on grafting onto routes in solution or on solid support were developed which afforded DNA block copolymers with hydrophilic, hydrophobic and thermoresponsive organic polymers in good yields. Beside the preparation of DNA block copolymers with a relative short DNA-segment, it was also demonstrated how these bioorganic polymers can be synthesized exhibiting large DNA blocks (>1000 bases) applying the polymerase chain reaction. Amphiphilic DNA block copolymers, which were synthesized fully automated in a DNA synthesizer, self-assemble into well-defined nanoparticles. Hybridization of spherical micelles with long DNA templates that encode several times the sequence of the micelle corona induced a transformation into rod-like micelles. The Watson-Crick motif aligned the hydrophobic polymer segments along the DNA double helix, which resulted in selective dimer formation. Even the length of the resulting nanostructures could be precisely adjusted by the number of nucleotides of the templates. In addition to changing the structural properties of DNA-b-PPO micelles, these materials were applied as 3D nanoscopic scaffolds for organic reactions. The DNA strands of the corona were organized by hydrophobic interactions of the organic polymer segments in such a fashion that several DNA-templated organic reactions proceeded in a sequence specific manner; either at the surface of the micelles or at the interface between the biological and the organic polymer blocks. The yields of reactions employing the micellar template were equivalent or better than existing template architectures. Aside from its physical properties and the morphologies achieved, an important requirement for a new biomaterial is its biocompatibility and interaction with living systems, i.e. human cells. The toxicity of the nanoparticles was analyzed by a cell proliferation assay. Motivated by the non-toxic nature of the amphiphilic DNA block copolymers, these nanoobjects were employed as drug delivery vehicles to target the anticancer drug to a tumor tissue. The micelles obtained from DNA block copolymers were easily functionalized with targeting units by hybridization. This facile route allowed studying the effect of the amount of targeting units on the targeting efficacy. By varying the site of functionalization, i.e. 5’ or 3’, the outcome of having the targeting unit at the periphery of the micelle or in the core of the micelle was studied. Additionally, these micelles were loaded with an anticancer drug, doxorubicin, and then applied to tumor cells. The viability of the cells was calculated in the presence and absence of targeting unit. It was demonstrated that the tumor cells bearing folate receptors showed a high mortality when the targeting unit was attached to the nanocarrier.

Synthese mehrfach fluorierter MUC1-Glycopeptide für die Entwicklung tumorselektiver Vakzine und Untersuchung Mikroreaktor-unterstützter Bausteinsynthesen

Zur Entwicklung einer selektiven Tumorimmuntherapie wurden im Rahmen dieser Dissertation potentielle Vakzine dargestellt. Als Leitstruktur für die Impfstoffkandidaten diente das Oberflächenglycoprotein MUC1, das durch fehlregulierte Enzymaktivitäten auf malignen Zellen strukturell verändert überexprimiert wird. Hierbei wurde insbesondere der Einfluss von Fluorsubstituenten in der Glycanseitenkette auf die Immunogenität und die Spezifität der Vakzine untersucht. Dazu wurde ein dreifach fluoriertes Analogon an Tetanus Toxoid (TTox) als Trägerprotein angebunden und in Immunisierungsstudien an transgenen Mäusen konnten hohe Selektivitäten und starke Immunantworten nachgewiesen werden. Die Darstellung des 20 Aminosäuren umfassenden Glycopeptides erfolgte an der festen Phase, wobei unterschiedlich fluorierte Thomsen-Friedenreich-Antigenanaloga anstelle eines Threonins in die Sequenz eingebaut wurden. Diese Bausteine wurden durch Glycosylierungsreaktionen fluorierter Donoren sowie Akzeptoren hergestellt, wobei Letztere durch nachträgliche Fluorierungen der Glycosylaminosäure erhalten wurden. Darüber hinaus wurde die Durchführung der komplexen Glycosylierungsreaktionen in Mikroreaktoren am Beispiel zweier fluorierter Glycosylaminosäuren untersucht. Neben der raschen Optimierung der Reaktionsparameter in Durchflussreaktoren konnte die direkte Umsetzung in einem mikrostrukturierten Reaktor in den präparativen Maßstab demonstriert werden.

Selbstorganisation von Amphiphilen auf Basis von Hexaphenylbenzol und Hexa-peri-hexabenzocoronen

Die Selbstorganisation von amphiphilen Molekülen wird genutzt, um in Lösung, auf der Oberfläche, in der festen Phase und an der Flüssig/Fest-Grenzfläche nanoskopisch strukturierte Materialien zu erhalten. Ziel hierbei ist es, die Dynamik der niedermolekularen Amphiphile mit der Stabilität der hochmolekularen Amphiphile zu vereinigen, um damit die Selbstorganisation der Moleküle zu kontrollieren. Drei Konzepte zur Strukturierung von Kohlenstoff durch Selbstorganisation werden vorgestellt. Im ersten Konzept werden aus Hexaphenylbenzol-Polyethylenglykol- (HPB-PEG) und Hexa-peri-hexabenzocoronen- (HBC-PEG) Derivaten wurmähnliche bzw. faserförmige Strukturen in wässriger Lösung erhalten. Der Wassergehalt in den Hydrogelfasern aus den HPB-PEG-Derivaten kann durch das Substitutionsmuster der Amphiphile und die Länge der PEG-Ketten eingestellt werden. Die Hydrogelfasern ähneln anders als die bisherigen Verfahren, die zur Faserherstellung verwendet werden (Extrudieren, Mikrofluid-Verarbeitung oder Elektrospinning), Systemen in der Natur. Der Beweis für die Bildung von Hydrogelfasern wird mittels spezieller Methoden der polarisierten und depolarisierten dynamischen Lichtstreuung erbracht. Im zweiten Konzept werden durch Elektronenbestrahlung und Pyrolyse von 3',4',5',6'-Tetraphenyl-[1,1':2',1''-terphenyl]-4,4''-dithiol homogene Kohlenstoffmembranen mit Poren erzeugt, die Anwendung in der Filtration finden können und im dritten Konzept wird die Selbstorganisation von einem ortho-verknüpften HPB-Trimer an der Flüssig/Fest-Grenzfläche untersucht. Auf diese Weise werden hochgeordnete lamellare Strukturen erhalten. In allen drei Konzepten sind die Geometrie und die Größe der Moleküle die entscheidenden Parameter zur Erzeugung definierter Strukturen.

Collagen XII interacts with avian tenascin-X through its NC3 domain

Large oligomeric proteins often contain several binding sites for different molecules and can therefore induce formation of larger protein complexes. Collagen XII, a multidomain protein with a small collagenous region, interacts with fibrillar collagens through its C-terminal region. However, no interactions to other extracellular proteins have been identified involving the non-collagenous N-terminal NC3 domain. To further elucidate the components of protein complexes present close to collagen fibrils, different extracellular matrix proteins were tested for interaction in a solid phase assay. Binding to the NC3 domain of collagen XII was found for the avian homologue of tenascin-X that in humans is linked to Ehlers-Danlos disease. The binding was further characterized by surface plasmon resonance spectroscopy and supported by immunohistochemical co-localization in chick and mouse tissue. On the ultrastructural level, detection of collagen XII and tenascin-X by immunogold labeling confirmed this finding.

Composition of recent carbonate bottom sediments from the Guiana shelf an off the West Africa

This work was based on a study of the upper layer of recent carbonate bottom sediments of the Atlantic Ocean. Biogenic carbonate of recent sediments is represented by metastable and stable minerals. In the ocean metastable phases can exist indefinitely long, but the structure of polymorphism determines inevitability of transformation of metastable phases into stable ones. This transformation occurs in the solid phase. In the absence of a critical point between the two phases of the transition process is not available for study by microscopic methods. It is estimated indirectly by studying the nature and extent of changes in mineral and chemical compositions. With aging of sediments their mineral composition alters in direction of increasing contents of resistant minerals. Fine grained sediments and fractions are subject to more intensive effects of early diagenesis processes, rather than coarse ones; this is reflected in their mineral composition. Regularities of distribution of carbonate minerals in size fractions consistent with the direction of polymorphic transformations in calcium carbonate. Such transformations can occur in a particular dimension of grains. Concrete grain size depends on environmental conditions. This situation explains presence of metastable biogenic carbonates at different depths of the ocean and suggests presence of diagenetic calcite in sediments occurring below expected for each case depth of the transition.

(Table 1) Composition of bottom sediments and pore waters from the West Africa shelf

Organic and mineral phosphorus (P_org and P_min) have been determined in pore waters of terrigenous, biogenous, as well as weakly phosphatic and phosphatic sediments from the shelf of the West Africa (in 30 samples). Concentrations of P_min in the pore waters have been examined in close relation to grain size and chemical composition (amounts of P and N_org) of solid phase of the sediments. It has been demonstrated that among sands and coarse silts, maximum concentrations of P_min (up to 1.7 mg/l) in the pore waters have been observed in weakly phosphatic and phosphatic sediments rich in organic matter of the highly productive shelf of the Southwest Africa. Concentrations of P_min in the pore waters are most clearly associated with contents of N_org in the solid phase of the sediments (correlation coefficient R = 0.71) and P_org in the pore waters (R = 0.78).

Geochemistry of sediments from the Eastern Cape Basin

Sediment cores retrieved in the Benguela coastal upwelling system off Namibia show very distinct enrichments of solid phase barium at the sulfate/methane transition (SMT). These barium peaks represent diagenetic barite (BaSO4) fronts which form by the reaction of upwardly diffusing barium with interstitial sulfate. Calculated times needed to produce these barium enrichments indicate a formation time of about 14,000 yr. Barium spikes a few meters below the SMT were observed at one of the investigated sites (GeoB 8455). Although this sulfate-depleted zone is undersaturated with respect to barite, the dominant mineral phase of these buried barium enrichments was identified as barite by scanning electron microscopy (SEM). This is the first study which reports the occurrence/preservation of pronounced barite enrichments in sulfate-depleted sediments buried a few meters below the SMT. At site GeoB 8455 high concentrations of dissolved barium in pore water as well as barium in the solid phase were observed. Modeling the measured barium concentrations at site GeoB 8455 applying the numerical model CoTReM reveals that the dissolution rate of barite directly below the SMT is about one order of magnitude higher than at the barium enrichments deeper in the sediment core. This indicates that the dissolution of barite at these deeper buried fronts must be retarded. Thus, the occurrence of the enrichments in solid phase barium at site GeoB 8455 could be explained by decreased dissolution rates of barite due to the changes in the concentration of barite in the sediment, as well as changes in the saturation state of fluids. Furthermore, the alteration of barite into witherite (BaCO3) via the transient phase barium sulfide could lead to the preservation of a former barite front as BaCO3. The calculations and modeling indicate that a relocation of the barite front to a shallower depth occurred between the last glacial maxium (LGM) and the Pleistocene/Holocene transition. We suggest that an upward shift of the SMT occurred at that time, most likely as a result of an increase in the methanogenesis rates due to the burial of high amounts of organic matter below the SMT.

Effects of sheep and horse manure and pine bark amendments on metal distribution and chemical properties of contaminated mine soils.

Mine soils usually contain large levels of heavy metals and poor fertility conditions which limit their reclamation and the application of phyto-remediation technologies. Two organic waste materials (pine bark compost and sheep and horse manure compost), with different pHs and varying degrees of humification and nutrient contents, were applied as amendments to assess their effects on copper (Cu) and zinc (Zn) bioavailability and on fertility conditions of mine soils. Soil samples collected from two abandoned mining areas near Madrid (Spain) were mixed with 0, 30 and 60 t ha?1 of the organic amendments. The concentrations of metals among the different mineral and organic fractions of soil were determined by several extraction procedures to study the metal distribution in the solid phase of the soil affected by the organic amendments. The results showed that the manure amendment increased the soil pH and the cation exchange capacity and enhanced the nutrient levels of these soils. The pine bark amendment decreased the soil pH and did not significantly change the nutrient status of soil. Soil pH, organic matter content and its degree of humification, which were altered by the amendments, were the main factors affecting Cu fractionation. Zn fractionation was mainly affected by soil pH. The addition of manure not only improved soil fertility, but also decreased metal bioavailability resulting in a reduction of metal toxicity. Conversely, pine bark amendment increased metal ioavailability. The use of sheep and horse manure could be a cost-effective practice for the restoration of contaminated mine soils.