Desenvolvimento de um aditivo natural à base de catequina: otimização da extração e estabilização a partir de frutos de Arbutus unedo L.

The common Mediterranean ornamental strawberry-tree (Arbutus unedo L.) produces an edible reddish sweet berry that is found to be bland and tasteless unless it is consumed overripe, otherwise it is discarded or used as basic agricultural sub residue. The bioactive properties of this fruit have been reported and related with phenolic compounds, mainly flavan-3-ols, such as catechin and procyanidins, which has opened the opportunity to exploit their extraction from alternative sources.The common Mediterranean ornamental strawberry-tree (Arbutus unedo L.) produces an edible reddish sweet berry that is found to be bland and tasteless unless it is consumed overripe, otherwise it is discarded or used as basic agricultural sub residue. The bioactive properties of this fruit have been reported and related with phenolic compounds, mainly flavan-3-ols, such as catechin and procyanidins, which has opened the opportunity to exploit their extraction from alternative sources. This study compares and optimizes the maceration, microwave and ultrasound extraction techniques in the recovery of a catechin extract from Arbutus unedo L. fruits and evaluate the stability of flavan-3-ols during storage and application processes. To obtain conditions that maximize the catechin extraction yield, a response surface methodology was used. Maceration and microwave extractions were found to be the most effective methods, capable of yielding 1.38±0.1 and 1.70±0.3 mg of catechin/g dry weight (dw) in the corresponding optimal extraction conditions. The optimal conditions for maceration were 93.2±3.7 min, 79.6±5.2 ºC and 23.1±3.7 % of ethanol, while for the microwave extraction were 42.2±4.1 min, 137.1±8.1 ºC and 12.1±1.1 % of ethanol. The microwave system was a quicker solution, conducting to slightly higher yields of catechin than maceration, but this one needed lower temperatures to reach similar yields. The ultrasound method was the least effective solution in terms of catechin yield extraction (0.71±0.1 mg/g at 42.4±3.6 min, 314.9±21.2 W and 40.3±3.8 %. ethanol). The stability was tested with of the catechin-enriched extract (60% flavan-3-ols and 22% catechin), obtained under the best maceration conditions, was tested. Therefore, catechin-enriched extracts were submitted to physical and chemical stability studies, considering the main affecting variables (time, temperature and pH): i) a stability study of the extracts during storage as powder system; and ii) a stability study of the extracts in simulated food environment (aqueous solution system). The measured responses were the flavan-3-ols and catechin contents, determined by HPLC-DAD, and the antioxidant activity of the extracts evaluated by hydrophilic assays. Mechanistic and phenomenological equations were used to describe the responses, and the optimal conditions for flavan-3-ols (including catechin) stability as powder extract during a month were pH= 5.4 and T= -20ºC; while its stability in aqueous solution remained during the 24 h of application at pH<4 and T<30ºC. This study compares and optimizes the maceration, microwave and ultrasound extraction techniques in the recovery of a catechin extract from Arbutus unedo L. fruits and evaluate the stability of flavan-3-ols during storage and application processes. To obtain conditions that maximize the catechin extraction yield, a response surface methodology was used. Maceration and microwave extractions were found to be the most effective methods, capable of yielding 1.38±0.1 and 1.70±0.3 mg of catechin/g dry weight (dw) in the corresponding optimal extraction conditions. The optimal conditions for maceration were 93.2±3.7 min, 79.6±5.2 ºC and 23.1±3.7 % of ethanol, while for the microwave extraction were 42.2±4.1 min, 137.1±8.1 ºC and 12.1±1.1 % of ethanol. The microwave system was a quicker solution, conducting to slightly higher yields of catechin than maceration, but this one needed lower temperatures to reach similar yields. The ultrasound method was the least effective solution in terms of catechin yield extraction (0.71±0.1 mg/g at 42.4±3.6 min, 314.9±21.2 W and 40.3±3.8 %. ethanol). The stability was tested with of the catechin-enriched extract (60% flavan-3-ols and 22% catechin), obtained under the best maceration conditions, was tested. Therefore, catechin-enriched extracts were submitted to physical and chemical stability studies, considering the main affecting variables (time, temperature and pH): i) a stability study of the extracts during storage as powder system; and ii) a stability study of the extracts in simulated food environment (aqueous solution system). The measured responses were the flavan-3-ols and catechin contents, determined by HPLC-DAD, and the antioxidant activity of the extracts evaluated by hydrophilic assays. Mechanistic and phenomenological equations were used to describe the responses, and the optimal conditions for flavan-3-ols (including catechin) stability as powder extract during a month were pH= 5.4 and T= -20ºC; while its stability in aqueous solution remained during the 24 h of application at pH<4 and T<30ºC.

An investigation into the properties of non-digestible carbohydrates that selectively promote colonic propionate production

Short chain fatty acids (SCFA), including propionate, are produced by the bacterial fermentation of carbohydrates in the colon. Propionate has many potential roles in health, including inhibiting cholesterol synthesis, de novo lipogenesis and increasing satiety. The profile of SCFA produced is determined by both the substrate available and the bacteria present and may be influenced by environmental conditions within the lumen of the colon. Whilst it may be beneficial to increase colonic propionate production, dietary strategies to achieve this are unproven. Adding propionate to food leads to poorer organoleptic properties, and oral propionate is absorbed in the small intestine. The optimum way to selectively increase colonic propionate would be to select fermentable carbohydrates that selectively promote propionate production. To date, few studies have undertaken a systematic assessment of the factors leading to increased colonic propionate production making the selection of propiogenic carbohydrates challenging. The aim of this thesis was to identify the best carbohydrates for selectively increasing propionate production, and to explore the factors which control propionate production. This work started with a systematic review of the literature for evidence of candidate carbohydrates, which led to a screen of ‘propiogenic’ substrates using in vitro batch fermentations and mechanistic analysis of the impact of pH, bond linkage and orientation using a range of sugars, polysaccharides and fibre sources. A new unit for SCFA production was developed to allow comparison of results from in vitro studies encompassing a range different methodologies found in the literature. The systematic review found that rhamnose yielded the highest rate and proportion of propionate production whereas, for polysaccharides, β-glucan ranked highest for rate and guar gum ranked highest for molar production, but this was not replicated across all studies. Thus, no single NDC was established as highly propiogenic. Some substrates appeared more propiogenic than others and when these were screened in vitro. Laminarin, and other β-glucans ranked highest for propionate production. Legume fibre and mycoprotein fibre were also propiogenic. A full complement of glucose disaccharides were tested to examine the role glycosidic bond orientation and position on propionate production. Of the glucose disaccharides tested, β(1-4) bonding was associated with increased proportion of propionate and α(1-1) and β(1-4) increased the rate and proportion of butyrate production. In conclusion, it appears that for fibre to affect satiety, high intakes of fibre are needed, and which a major mechanism is thought to occur via propionate. Within this thesis it was identified that rather than selecting specific fibres, increasing overall intakes of highly fermentable carbohydrates is as effective at increasing propionate production. Selecting carbohydrates with beta-bonding, particularly laminarin and other β(1-4) fermentable carbohydrates leads to marginal increases in propionate production. Compared with targeted delivery of propionate to the colon, fermentable carbohydrates examined in this thesis have lesser and variable effects on propionate production. A more complete understanding of the impact of bond configurations in polysaccharides, rather than disaccharides, may help selection or design of dietary carbohydrates which selectively promote colonic propionate production substrates for inclusion in functional foods. Overall this study has concluded that few substrates are selectively propiogenic and the evidence suggests that similar changes in propionate production may be achieved by modest changes in dietary fibre intake

Nutritional and chemical characterization of food products enriched with biological produced fruits of Vaccinum myrtillus L

Vaccinum myrtillus L. belongs to Ericaceae family, being commonly known for its sweet small fruits: the blueberries. Widely consumed in fresh, these fruits are also used in jams and marmalades due to their digestive and hypoglycemic properties and also due to the presence of several bioactive compounds [!]. Therefore, it has become a very appealing matrix in the development of functional products that, beyond their nutritional properties, will add a long-term beneficial physiological/health effect [2]. In the present work, three novel blueberry based products developed by RBR Foods Company (Portugal), were characterized in terms of their nutritional and chemical properties: carbohydrates, ash, proteins, fat and energetic value (following official methods of food analysis), fatty acids profile (by CG-FID), soluble sugars (by HPLCRI), organic acids (by HPLC-DAD) and tocopherols (by HPLC-fluorescence). The products result from a mixture of the fruits with rose petals (PI), marigold petals (P2) and apple and goji berries (P3). The blueberry fruits were used as control sample. The nutritional profile of the novel products was very similar to the control sample: the carbohydrates were the most abundant macronutrient, followed by proteins and total fat. Regarding sugars, fructose, glucose and sucrose were identified in all the samples. P 1 and P2 didn't show significant differences in comparison to the control, however, P3 revealed a lower concentration of sugars. In terms of fatty acids composition, all the studied samples presented higher contents in polyunsaturated fatty acids, especially due to the contribution of linoleic and alinolenic acids. The results of tocopherols revealed that the control sample only presented two isoforrns of tocopherols, a- and y-tocopherol, being the same observed in P3. However, P 1 revealed the presence of all the isoforrns of tocopherols, while P2 was lacking otocopherol; which is related with the contribution of rose and marigold petals, respectively. The a-tocopherol isoforrn was the most abundant in all the studied samples. Overall, this work contributed to the nutritional characterization of novel blueberry based products and is a part of a wider project that aims the detailed study of these products, namely their potential to be used as functional foods.

Gamma radiation preserves chemical and bioactive properties of Boletus edulis wild mushrooms

Boletus edulis Bull: Fr. is an edible mushroom quite appreciated for its organoleptic and nutritional properties. However, the seasonality and perishability cause some difficulties in its distribution and marketing in fresh form; losses associated with this type of food during marketing can reach 40% [1]. Irradiation is recognized as a safe and effective method for food preservation, being used worldwide to increase shelf life of fresh and dehydrated products (e.g. fruits, vegetables and spices) [2]. In particular, gamma irradiation has already been applied to cultivated mushrooms (especially Agaricus, Lentinula and Pleurotus Genus) and proved to be an interesting conservation technology [3]. However, the studies with added-value wild species are scarce. In this work, the effects of gamma irradiation on chemical and antioxidant properties of wild B. edulis, were evaluated. Fruiting bodies were obtained in Trás-os-Montes, in the Northeast of Portugal, in November 2012. The irradiation was performed in experimental equipment with 60Co sources at 1 and 2 kGy. All the results were compared with nonirradiated samples (control). Macronutrients and energy value were determined following official procedures of food analysis; fatty acids were analyzed by gas-chromatography coupled to flame ionization detection (GC-FID), while sugars and tocopherols were determined by high performance liquid chromatography (HPLC) coupled to refraction index (RI) and fluorescence detectors, respectively. Antioxidant activity was evaluated in the methanolic extracts by in vitro assays measuring DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging activity, reducing power, inhibition of β- carotene bleaching and inhibition of lipid peroxidation using thiobarbituric acid reactive substances (TBARS) assay. Total phenolics were also determined by the Folin-Ciocalteu assay. The nutritional profiles were not affected in high extension. Fatty acids and sugars were slightly affected, decreasing with the increasing doses. The performed assays for antioxidant activity, indicate that irradiated samples tended to have lower scavenging activity and reducing power, but higher lipid peroxidation inhibition. Despite the detected differences in individual compounds, the results of nutritional parameters, the most relevant in terms of mushroom acceptability by consumers, were less affected, indicating an interesting potential of gamma-irradiation to be used as an effective conservation technology for the studied mushrooms.

Wild Morchella conica Pers. from different origins: a comparative study of nutritional and bioactive properties

Morchella conica Pers. is a species of fungus that belongs to the Morchellaceae family and was studied in order to obtain more information about this species, by comparing Portuguese and Serbian wild samples. Free sugars, fatty acids, tocopherols, organic and phenolic acids were analysed by chromatographic techniques. M. conica methanolic extracts were tested regarding antioxidant and antimicrobial properties. The absence of hepatotoxicity was confirmed in porcine liver primary cells.

Rheological Properties of a Sodium Bentonite and Lactose Aqueous Dispersion

Aim of this paper is show the viscosity measure of a sodium bentonite-water-lactose mixture and your rheological behaviour. This analysis showed the formation of tridimensional structure type and formation of stratified silicate/lactose, this occurred due to different concentrations of organic products into mixture and due to a difference of rotation during viscosity measument. Formation of networks is a consequence of the attraction between the silicate layers in water-lactose mixture. In the present work aqueous solutions of lactose with concentration of 7%, 5%, 3%, 1% and 0% (wt %) were used.

Polyporus squamosus (Huds.) Fr from different origins: chemical characterization, screening of the bioactive properties and specific antimicrobial effects against Pseudomonas aeruginosa

Wild mushrooms are mainly collected during the rainy season and valued as a nutritious food and sources of natural medicines and nutraceuticals. The aim of this study was to determine the chemical composition and bioactive properties (antioxidant, antimicrobial and cytotoxicity) of Polyporus squamosus from two different origins, Portugal and Serbia. The sample from Portugal showed higher contents of as protein (17.14 g/100 g), fat (2.69 g/100 g), ash (3.15 g/100 g) and carbohydrates (77.02 g/100 g); the same sample gave the highest antioxidant activity: highest reducing power, DPPH radical scavenging activity, and lipid peroxidation inhibition in both β-carotene/linoleate and TBARS assay. These results could be related to its higher content in total tocopherols (1968.65 μg/100 g) and phenolic compounds (1.29 mg/100 g). Both extracts exhibited antibacterial activity against all the tested organisms. The samples from Serbia gave higher overall antibacterial activity and showed excellent antibiofilm activity (88.30 %). Overall, P. squamosus methanolic extracts possessed antioxidant, antimicrobial, antibiofilm and anti-quorum sensing activity, and without toxicity for liver cells. This investigation highlights alternatives to be explored for the treatment of bacterial infections, in particular against Pseudomonas aeruginosa. This study provides important results for the chemical and bioactive properties, especially antimicrobial activity of the mushroom P. squamosus. Moreover, to the authors’ knowledge this is the first report on sugars, organic acids, and individual phenolic compounds in P. squamosus.

Evaluation of the Genotoxicity of Chitosan Nanoparticles for Use in Food Packaging Films

The use of nanoparticles in food packaging has been proposed on the basis that it could improve protection of foods by, for example, reducing permeation of gases, minimizing odor loss, and increasing mechanical strength and thermal stability. Consequently, the impacts of such nanoparticles on organisms and on the environment need to be investigated to ensure their safe use. In an earlier study, Moura and others (2008a) described the effect of addition of chitosan (CS) and poly(methacrylic acid) (PMAA) nanoparticles on the mechanical properties, water vapor, and oxygen permeability of hydroxypropyl methylcellulose films used in food packaging. Here, the genotoxicity of different polymeric CS/PMAA nanoparticles (size 60, 82, and 111 nm) was evaluated at different concentration levels, using the Allium cepa chromosome damage test as well as cytogenetic tests employing human lymphocyte cultures. Test substrates were exposed to solutions containing nanoparticles at polymer mass concentrations of 1.8, 18, and 180 mg/L. Results showed no evidence of DNA damage caused by the nanoparticles (no significant numerical or structural changes were observed), however the 82 and 111 nm nanoparticles reduced mitotic index values at the highest concentration tested (180 mg/L), indicating that the nanoparticles were toxic to the cells used at this concentration. In the case of the 60 nm CS/PMAA nanoparticles, no significant changes in the mitotic index were observed at the concentration levels tested, indicating that these particles were not toxic. The techniques used show promising potential for application in tests of nanoparticle safety envisaging the future use of these materials in food packaging.

Structure-properties correlations in divalent metal phosphonates

Crystalline metal phosphonates may offer acidic sites, structural flexibility and guest molecules (H2O, heterocyclics, etc.) which can act as proton carriers. In addition, some frameworks are also amenable for post‐synthesis modifications in order to enhance desired properties [1,2]. In this work, we present the synthesis and structural characterization of two hydroxyphosphonoacetates hybrids based on magnesium, [Mg5(O3PCHOHCOO)2(HO3PCHOHCOO)2·8H2O] [Mg5(HPAA)2(H1HPAA)2·8H2O], and zinc, [Zn6K(O3PCHOHCOO)4(OH)·6.5H2O] [Zn6K(HPAA)4(OH)·6.5H2O]. Both solids present three-dimensional frameworks and their crystal structures were solved ab initio from X-ray powder diffraction. The proton conductivity of [Zn6K(HPAA)4(OH)·6.5H2O] as well as ammonia derivatives of M(II)(HO3PCHOHCOO)·2H2O [M(II)=Zn, Mg] will be reported and discussed.

NUTRITIONAL COMPOSITION AND ANTIOXIDANT PROPERTIES OF RAPHIONACME SPLENDENS (SCHL.) TUBERS

People of Western Kordofan (Sudan) are endowed with a deep knowledge concerning the use of wild plants. Tubers of Raphionacme splendens Schl. subspecies splendens Flickr (family Apocynaceae), locally known as Elfayo, are used as a food reserve during times of famine or poor harvest. The aim of this study was to analyze the nutritional composition and antioxidant capacity of root tubers of R. splendens. Samples were collected from South-West Kordofan. Analyses included determination of moisture, carbohydrate, crude protein, fat, fibre, ash, minerals, vitamin C, amino acids and fatty acids composition. Antioxidant activity was determined by the DPPH (1,1-diphenyl-2-picrylhydrazyl) and ABTS (2.2’-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) assays. The total phenolic content was also assessed. The results, which are referred to as (%) dry weight, showed that the tubers contained 3.2% protein, 18% carbohydrate, 0.5% lipid, 2.4% crude fibre, 3.5% ash, 79.2% moisture and gross energy 101.7 kJ/g. The total amino acids were 10776 mg/100g where the essential amino acids represented 28.2%. The more abundant essential amino acids were leucine (792mg/100g), isoleucine (712mg/100g) and threonine (536mg/100g). Methionine and lysine were the limiting amino acids. Minerals were potassium (259mg/100g), calcium (183mg/100g), magnesium (64mg/100g), phosphorus (37mg/100g), copper (3.6mg/100g), manganese (2.4mg/100g), zinc (1.8mg/100g) and iron (1.2mg/100g). Total saturated fatty acids were 45.6% whereas total unsaturated fatty acids were 54.4%. Oleic acid (32.56%) and palmitic acid (30.23%) were the most abundant fatty acids. Tubers displayed good antioxidant activity with IC50 values 0.987 and 1.559mg/mL against DPPH and ABTS radicals respectively. Vitamin C was 31.5mg/100g and total phenolic content was 60mg gallic acid equivalent (GAE) per 100g dry sample and they could be the main contributor to the antioxidant capacity of the tubers. In conclusion, the results of this study suggested that tubers of R. splendens could have beneficial effect for food and/or nutraceutical application for normal growth and adequate protection against diseases associated with reactions of free radicals.

Physical and chemical properties of starch and flour from different common bean (Phaseolus vulgaris L.) cultivar.

The physical, chemical and pasting properties of the flour and isolated starches from six different bean cultivars (Phaseolus vulgaris L.) were investigated in order to obtain information for application in new products. The protein and total starch contents of the bean flours ranged from 17.72 to 20.27% and from 39.68 to 43.78%, respectively. The bean starches had low amounts of proteins, lipids and ash and showed an amylose content ranging between 45.32 and 51.11% and absolute density values between 1.55 and 1.78 g.cm?3. The bean starch granules were round to oval with a smooth surface. Results viscoamylographic profiles of the starches and flours showed the possibility of selecting cultivars for specific applications according to these characteristics.

Effect of Chemical Pretreatments on the Physical Properties of Kiwi

In this work the effect of pre-treatments on the physical properties of fresh kiwi was studied. For that, a set of tests using chemical pretreatments was used, in which the samples were subjected to aqueous solutions of ascorbic acid and potassium metabisulfite at concentrations of 0.25% and 1% (w/v) for periods of 30 and 60 minutes, in order to understand the implications of the treatments in the color and texture of the kiwi as compared to its original properties. The results showed that the kiwi treated with ascorbic acid changed its color very intensively when compared to the fresh product, and this trend was intensified after storage. Contrarily, when potassium metabisulfite was used, the changes in color were quite negligible right after the treatment and even lower after the storage period of 6 days under refrigeration. After the treatments with both solutions, the kiwi texture was drastically changed, diminishing hardness considerably and increasing elasticity for all treatments. The same could be observed after six days of refrigeration.

Evaluation of physicochemical and glycaemic properties of commercial plant-based milk substitutes

The market for plant-based dairy-type products is growing as consumers replace bovine milk in their diet, for medical reasons or as a lifestyle choice. A screening of 17 different commercial plant-based milk substitutes based on different cereals, nuts and legumes was performed, including the evaluation of physicochemical and glycaemic properties. Half of the analysed samples had low or no protein contents (<0.5 %). Only samples based on soya showed considerable high protein contents, matching the value of cow’s milk (3.7 %). An in-vitro method was used to predict the glycaemic index. In general, the glycaemic index values ranged from 47 for bovine milk to 64 (almond-based) and up to 100 for rice-based samples. Most of the plant-based milk substitutes were highly unstable with separation rates up to 54.39 %/h. This study demonstrated that nutritional and physicochemical properties of plant-based milk substitutes are strongly dependent on the plant source, processing and fortification. Most products showed low nutritional qualities. Therefore, consumer awareness is important when plant-based milk substitutes are used as an alternative to cow’s milk in the diet.

Effects of plasticizing and crosslinking on the mechanical and barrier properties of coatings based on blends of starch and poly(vinyl alcohol)

In the last decades, intensive research has been carried out in order to replace oil-based polymers with bio-based polymers due to growing environmental concerns. So far, most of the barrier materials used in food packaging are petroleum-based materials. The purpose of the barrier is to protect the packaged food from oxygen, water vapour, water and fat. The mechanical and barrier properties of coatings based on starch-plasticizer and starch-poly(vinyl alcohol) (PVOH)-plasticizer blends have been studied in the work described in this thesis. The plasticizers used were glycerol, polyethylene glycol and citric acid. In a second step, polyethylene coatings were extruded onto paperboard pre-coated with a starch-PVOH-plasticizer blend. The addition of PVOH to the starch increased the flexibility of the film. Curing of the film led to a decrease in flexibility and an increase in tensile strength. The flexibility of the starch-PVOH films was increased more when glycerol or polyethylene glycol was added than citric acid. The storage modulus of the starch-PVOH films containing citric acid increased substantially at high temperature. It was seen that the addition of polyethylene glycol or citric acid to the starch-PVOH blend resulted in an enrichment of PVOH at the surface of the films. Tensile tests on the films indicated that citric acid acted as a compatibilizer and increased the compatibility of the starch and PVOH in the blend. The addition of citric acid to the coating recipe substantially decreased the water vapour transmission rate through the starch-PVOH coated paperboard, which indicated that citric acid acts as a cross-linker for starch and/or PVOH. The starch-PVOH coatings containing citric acid showed oxygen-barrier properties similar to those of pure PVOH or of a starch-PVOH blend without plasticizer when four coating layers were applied on a paperboard. The oxygen-barrier properties of coatings based on a starch-PVOH blend containing citric acid indicated a cross-linking and increase in compatibility of the starch-PVOH blends. Polyethylene extrusion coating on a pre-coated paperboard resulted in a clear reduction in the oxygen transmission rate for all the pre-coating formulations containing plasticizers. The addition of a plasticizer to the pre-coating reduced the adhesion of polyethylene to pre-coated board. Polyethylene extrusion coating gave a board with a lower oxygen transmission rate when the paperboard was pre-coated with a polyethylene-glycol-containing formulation than with a citric-acid-containing formulation. The addition of polyethylene glycol to pre-coatings indicated an increase in wetting of the pre-coated paperboard by the polyethylene melt, and this may have sealed the small defects in the pre-coating leading to low oxygen transmission rate. The increase in brittleness of starch-PVOH films containing citric acid at a high temperature seemed to have a dominating effect on the barrier properties developed by the extrusion coating process. 

Enhancement of the total phenolic compounds and antioxidant activity of aqueous Citrus limon L. pomace extracts using microwave pre-treatment on the dry powder

The effect of microwave pre-treatment on the levels of total phenolic compounds, flavonoids, proanthocyanidins and individual major compounds as well as the total antioxidant activity of the dried lemon pomace was investigated. The results showed that microwave pre-treatment significantly affected all the examined parameters. The total phenolic content, total flavonoids, proanthocyanidins, as well as the total antioxidant activity significantly increased as the microwave radiation time and power increased (e.g., 2.5 folds for phenolics, 1.4 folds for flavonoids and 5.5 folds for proanthocyanidins), however irradiation more than 480 W for 5 min resulted in the decrease of these parameters. These findings indicate that microwave irradiation time and power may enhance higher levels of the phenolic compounds as well as the antioxidant capacity of the dried lemon pomace powder. However, higher and longer irradiation may lead to a degradation of phenolic compounds and lower the antioxidant capacity of the dried lemon pomace.